- 13 Mar, 2019 40 commits
-
-
Florian Westphal authored
[ Upstream commit 98bfc341 ] Check basic nat/redirect/masquerade for ipv4 and ipv6. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Naresh Kamboju authored
[ Upstream commit 952b72f8 ] In selftests the config fragment for netfilter was added as NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y Signed-off-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Acked-by:
-
Andy Shevchenko authored
[ Upstream commit 6454368a ] In case of mapping error the DMA addresses are invalid and continuing will screw system memory or potentially something else. [ 222.480310] dmatest: dma0chan7-copy0: summary 1 tests, 3 failures 6 iops 349 KB/s (0) ... [ 240.912725] check: Corrupted low memory at 00000000c7c75ac9 (2940 phys) = 5656000000000000 [ 240.921998] check: Corrupted low memory at 000000005715a1cd (2948 phys) = 279f2aca5595ab2b [ 240.931280] check: Corrupted low memory at 000000002f4024c0 (2950 phys) = 5e5624f349e793cf ... Abort any test if mapping failed. Fixes: 4076e755 ("dmatest: convert to dmaengine_unmap_data") Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Stefano Garzarella authored
[ Upstream commit 85965487 ] When the virtio transport device disappear, we should reset all connected sockets in order to inform the users. Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Stefano Garzarella authored
[ Upstream commit 22b5c0b6 ] virtio_vsock_remove() invokes the vsock_core_exit() also if there are opened sockets for the AF_VSOCK protocol family. In this way the vsock "transport" pointer is set to NULL, triggering the kernel panic at the first socket activity. This patch move the vsock_core_init()/vsock_core_exit() in the virtio_vsock respectively in module_init and module_exit functions, that cannot be invoked until there are open sockets. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1609699Reported-by:
Yan Fu <yafu@redhat.com> Signed-off-by:
-
Codrin Ciubotariu authored
[ Upstream commit dc3f595b ] atchan->status variable is used to store two different information: - pass channel interrupts status from interrupt handler to tasklet; - channel information like whether it is cyclic or paused; This causes a bug when device_terminate_all() is called, (AT_XDMAC_CHAN_IS_CYCLIC cleared on atchan->status) and then a late End of Block interrupt arrives (AT_XDMAC_CIS_BIS), which sets bit 0 of atchan->status. Bit 0 is also used for AT_XDMAC_CHAN_IS_CYCLIC, so when a new descriptor for a cyclic transfer is created, the driver reports the channel as in use: if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) { dev_err(chan2dev(chan), "channel currently used\n"); return NULL; } This patch fixes the bug by adding a different struct member to keep the interrupts status separated from the channel status bits. Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
-
Paul Kocialkowski authored
[ Upstream commit b14e945b ] When initializing clocks, a reference to the TCON channel 0 clock is obtained. However, the clock is never prepared and enabled later. Switching from simplefb to DRM actually disables the clock (that was usually configured by U-Boot) because of that. On the V3s, this results in a hang when writing to some mixer registers when switching over to DRM from simplefb. Fix this by preparing and enabling the clock when initializing other clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is apparently too late and results in the same mixer register access hang. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.kocialkowski@bootlin.comSigned-off-by:
-
Alexei Starovoitov authored
[ Upstream commit a89fac57 ] Lockdep warns about false positive: [ 12.492084] 00000000e6b28347 (&head->lock){+...}, at: pcpu_freelist_push+0x2a/0x40 [ 12.492696] but this lock was taken by another, HARDIRQ-safe lock in the past: [ 12.493275] (&rq->lock){-.-.} [ 12.493276] [ 12.493276] [ 12.493276] and interrupts could create inverse lock ordering between them. [ 12.493276] [ 12.494435] [ 12.494435] other info that might help us debug this: [ 12.494979] Possible interrupt unsafe locking scenario: [ 12.494979] [ 12.495518] CPU0 CPU1 [ 12.495879] ---- ---- [ 12.496243] lock(&head->lock); [ 12.496502] local_irq_disable(); [ 12.496969] lock(&rq->lock); [ 12.497431] lock(&head->lock); [ 12.497890] <Interrupt> [ 12.498104] lock(&rq->lock); [ 12.498368] [ 12.498368] *** DEADLOCK *** [ 12.498368] [ 12.498837] 1 lock held by dd/276: [ 12.499110] #0: 00000000c58cb2ee (rcu_read_lock){....}, at: trace_call_bpf+0x5e/0x240 [ 12.499747] [ 12.499747] the shortest dependencies between 2nd lock and 1st lock: [ 12.500389] -> (&rq->lock){-.-.} { [ 12.500669] IN-HARDIRQ-W at: [ 12.500934] _raw_spin_lock+0x2f/0x40 [ 12.501373] scheduler_tick+0x4c/0xf0 [ 12.501812] update_process_times+0x40/0x50 [ 12.502294] tick_periodic+0x27/0xb0 [ 12.502723] tick_handle_periodic+0x1f/0x60 [ 12.503203] timer_interrupt+0x11/0x20 [ 12.503651] __handle_irq_event_percpu+0x43/0x2c0 [ 12.504167] handle_irq_event_percpu+0x20/0x50 [ 12.504674] handle_irq_event+0x37/0x60 [ 12.505139] handle_level_irq+0xa7/0x120 [ 12.505601] handle_irq+0xa1/0x150 [ 12.506018] do_IRQ+0x77/0x140 [ 12.506411] ret_from_intr+0x0/0x1d [ 12.506834] _raw_spin_unlock_irqrestore+0x53/0x60 [ 12.507362] __setup_irq+0x481/0x730 [ 12.507789] setup_irq+0x49/0x80 [ 12.508195] hpet_time_init+0x21/0x32 [ 12.508644] x86_late_time_init+0xb/0x16 [ 12.509106] start_kernel+0x390/0x42a [ 12.509554] secondary_startup_64+0xa4/0xb0 [ 12.510034] IN-SOFTIRQ-W at: [ 12.510305] _raw_spin_lock+0x2f/0x40 [ 12.510772] try_to_wake_up+0x1c7/0x4e0 [ 12.511220] swake_up_locked+0x20/0x40 [ 12.511657] swake_up_one+0x1a/0x30 [ 12.512070] rcu_process_callbacks+0xc5/0x650 [ 12.512553] __do_softirq+0xe6/0x47b [ 12.512978] irq_exit+0xc3/0xd0 [ 12.513372] smp_apic_timer_interrupt+0xa9/0x250 [ 12.513876] apic_timer_interrupt+0xf/0x20 [ 12.514343] default_idle+0x1c/0x170 [ 12.514765] do_idle+0x199/0x240 [ 12.515159] cpu_startup_entry+0x19/0x20 [ 12.515614] start_kernel+0x422/0x42a [ 12.516045] secondary_startup_64+0xa4/0xb0 [ 12.516521] INITIAL USE at: [ 12.516774] _raw_spin_lock_irqsave+0x38/0x50 [ 12.517258] rq_attach_root+0x16/0xd0 [ 12.517685] sched_init+0x2f2/0x3eb [ 12.518096] start_kernel+0x1fb/0x42a [ 12.518525] secondary_startup_64+0xa4/0xb0 [ 12.518986] } [ 12.519132] ... key at: [<ffffffff82b7bc28>] __key.71384+0x0/0x8 [ 12.519649] ... acquired at: [ 12.519892] pcpu_freelist_pop+0x7b/0xd0 [ 12.520221] bpf_get_stackid+0x1d2/0x4d0 [ 12.520563] ___bpf_prog_run+0x8b4/0x11a0 [ 12.520887] [ 12.521008] -> (&head->lock){+...} { [ 12.521292] HARDIRQ-ON-W at: [ 12.521539] _raw_spin_lock+0x2f/0x40 [ 12.521950] pcpu_freelist_push+0x2a/0x40 [ 12.522396] bpf_get_stackid+0x494/0x4d0 [ 12.522828] ___bpf_prog_run+0x8b4/0x11a0 [ 12.523296] INITIAL USE at: [ 12.523537] _raw_spin_lock+0x2f/0x40 [ 12.523944] pcpu_freelist_populate+0xc0/0x120 [ 12.524417] htab_map_alloc+0x405/0x500 [ 12.524835] __do_sys_bpf+0x1a3/0x1a90 [ 12.525253] do_syscall_64+0x4a/0x180 [ 12.525659] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 12.526167] } [ 12.526311] ... key at: [<ffffffff838f7668>] __key.13130+0x0/0x8 [ 12.526812] ... acquired at: [ 12.527047] __lock_acquire+0x521/0x1350 [ 12.527371] lock_acquire+0x98/0x190 [ 12.527680] _raw_spin_lock+0x2f/0x40 [ 12.527994] pcpu_freelist_push+0x2a/0x40 [ 12.528325] bpf_get_stackid+0x494/0x4d0 [ 12.528645] ___bpf_prog_run+0x8b4/0x11a0 [ 12.528970] [ 12.529092] [ 12.529092] stack backtrace: [ 12.529444] CPU: 0 PID: 276 Comm: dd Not tainted 5.0.0-rc3-00018-g2fa53f89 #475 [ 12.530043] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 [ 12.530750] Call Trace: [ 12.530948] dump_stack+0x5f/0x8b [ 12.531248] check_usage_backwards+0x10c/0x120 [ 12.531598] ? ___bpf_prog_run+0x8b4/0x11a0 [ 12.531935] ? mark_lock+0x382/0x560 [ 12.532229] mark_lock+0x382/0x560 [ 12.532496] ? print_shortest_lock_dependencies+0x180/0x180 [ 12.532928] __lock_acquire+0x521/0x1350 [ 12.533271] ? find_get_entry+0x17f/0x2e0 [ 12.533586] ? find_get_entry+0x19c/0x2e0 [ 12.533902] ? lock_acquire+0x98/0x190 [ 12.534196] lock_acquire+0x98/0x190 [ 12.534482] ? pcpu_freelist_push+0x2a/0x40 [ 12.534810] _raw_spin_lock+0x2f/0x40 [ 12.535099] ? pcpu_freelist_push+0x2a/0x40 [ 12.535432] pcpu_freelist_push+0x2a/0x40 [ 12.535750] bpf_get_stackid+0x494/0x4d0 [ 12.536062] ___bpf_prog_run+0x8b4/0x11a0 It has been explained that is a false positive here: https://lkml.org/lkml/2018/7/25/756 Recap: - stackmap uses pcpu_freelist - The lock in pcpu_freelist is a percpu lock - stackmap is only used by tracing bpf_prog - A tracing bpf_prog cannot be run if another bpf_prog has already been running (ensured by the percpu bpf_prog_active counter). Eric pointed out that this lockdep splats stops other legit lockdep splats in selftests/bpf/test_progs.c. Fix this by calling local_irq_save/restore for stackmap. Another false positive had also been worked around by calling local_irq_save in commit 89ad2fa3 ("bpf: fix lockdep splat"). That commit added unnecessary irq_save/restore to fast path of bpf hash map. irqs are already disabled at that point, since htab is holding per bucket spin_lock with irqsave. Let's reduce overhead for htab by introducing __pcpu_freelist_push/pop function w/o irqsave and convert pcpu_freelist_push/pop to irqsave to be used elsewhere (right now only in stackmap). It stops lockdep false positive in stackmap with a bit of acceptable overhead. Fixes: 557c0c6e ("bpf: convert stackmap to pre-allocation") Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Martynas Pumputis authored
[ Upstream commit 1bb54c40 ] Previously, bpf_num_possible_cpus() had a bug when calculating a number of possible CPUs in the case of sparse CPU allocations, as it was considering only the first range or element of /sys/devices/system/cpu/possible. E.g. in the case of "0,2-3" (CPU 1 is not available), the function returned 1 instead of 3. This patch fixes the function by making it parse all CPU ranges and elements. Signed-off-by:
Martynas Pumputis <m@lambda.lt> Acked-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
-
Greg Kroah-Hartman authored
[ Upstream commit 2c1cf00e ] If create_buf_file() returns an error, don't try to reference it later as a valid dentry pointer. This problem was exposed when debugfs started to return errors instead of just NULL for some calls when they do not succeed properly. Also, the check for WARN_ON(dentry) was just wrong :) Reported-by:
Kees Cook <keescook@chromium.org> Reported-and-tested-by: syzbot+16c3a70e1e9b29346c43@syzkaller.appspotmail.com Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Rientjes <rientjes@google.com> Fixes: ff9fb72b ("debugfs: return error values, not NULL") Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Zenghui Yu authored
[ Upstream commit 56841070 ] According to ARM IHI 0069C (ID070116), we should use GITS_TYPER's bits [7:4] as ITT_entry_size instead of [8:4]. Although this is pretty annoying, it only results in a potential over-allocation of memory, and nothing bad happens. Fixes: 3dfa576b ("irqchip/gic-v3-its: Add probing for VLPI properties") Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> [maz: massaged subject and commit message] Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit e2cd682d ] In stmmac xmit callback we use a different flow for TSO packets but TSO xmit callback is not disabling the EEE mode. Fix this by disabling earlier the EEE mode, i.e. before calling the TSO xmit callback. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit c5acdbee ] The number of TSO enabled channels in HW can be different than the number of total channels. There is no way to determined, at runtime, the number of TSO capable channels and its safe to assume that if TSO is enabled then at least channel 0 will be TSO capable. Lets always send TSO packets from Queue 0. Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 4ec5302f ] If we don't have DT then stmmac_clk will not be available. Let's add a new Platform Data field so that we can specify the refclk by this mean. This way we can still use the coalesce command in PCI based setups. Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit 2380a22b ] Resetting bit 4 disables the interrupt delivery to the "secure processor" core. This breaks the keyboard on a OLPC XO 1.75 laptop, where the firmware running on the "secure processor" bit-bangs the PS/2 protocol over the GPIO lines. It is not clear what the rest of the bits are and Marvell was unhelpful when asked for documentation. Aside from the SP bit, there are probably priority bits. Leaving the unknown bits as the firmware set them up seems to be a wiser course of action compared to just turning them off. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Acked-by:
Pavel Machek <pavel@ucw.cz> [maz: fixed-up subject and commit message] Signed-off-by:
-
Anders Roxell authored
[ Upstream commit f2105d42 ] Fix link errors when CONFIG_FSL_USB2_OTG is enabled and USB_OTG_FSM is set to module then the following link error occurs. aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_ioctl': drivers/usb/phy/phy-fsl-usb.c:1083: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:1083:(.text+0x574): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_srp': drivers/usb/phy/phy-fsl-usb.c:674: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:674:(.text+0x61c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_host': drivers/usb/phy/phy-fsl-usb.c:593: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:593:(.text+0x7a4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_hnp': drivers/usb/phy/phy-fsl-usb.c:695: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:695:(.text+0x858): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `a_wait_enum': drivers/usb/phy/phy-fsl-usb.c:274: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:274:(.text+0x16f0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o:drivers/usb/phy/phy-fsl-usb.c:619: more undefined references to `otg_statemachine' follow aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_peripheral': drivers/usb/phy/phy-fsl-usb.c:619:(.text+0x1fa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' make[1]: *** [Makefile:1020: vmlinux] Error 1 make[1]: Target 'Image' not remade because of errors. make: *** [Makefile:152: sub-make] Error 2 make: Target 'Image' not remade because of errors. Rework so that FSL_USB2_OTG depends on that the USB_OTG_FSM is builtin. Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Zhou Yanjie authored
[ Upstream commit 1ca1c87f ] According to the Schematic, the hardware of ci20 leads to uart3, but not to uart2. Uart2 is miswritten in the original code. Signed-off-by:
Zhou Yanjie <zhouyanjie@cduestc.edu.cn> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: linux-mips <linux-mips@vger.kernel.org> Cc: linux-kernel <linux-kernel@vger.kernel.org> Cc: devicetree@vger.kernel.org Cc: robh+dt@kernel.org Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: mark.rutland@arm.com Cc: malat@debian.org Cc: ezequiel@collabora.co.uk Cc: ulf.hansson@linaro.org Cc: syq <syq@debian.org> Cc: jiaxun.yang <jiaxun.yang@flygoat.com> Signed-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit 2a81efb0 ] Add compatible to gicv3 node to enable quirk required to restrict writing to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor. With this quirk MSM8996 can at least boot out of mainline, which can help community to work with boards based on MSM8996. Without this patch Qualcomm DB820c board reboots on mainline. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Peng Hao authored
[ Upstream commit ba16adeb ] devm_ allocated data will be automatically freed. The free of devm_ allocated data is invalid. Fixes: 1c459de1 ("ARM: pxa: ssp: use devm_ functions") Signed-off-by:
Peng Hao <peng.hao2@zte.com.cn> [title's prefix changed] Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Yafang Shao authored
[ Upstream commit c9e45767 ] When sock recvbuff is set by bpf_setsockopt(), the value must by limited by rmem_max. It is the same with sendbuff. Fixes: 8c4b4c7e ("bpf: Add setsockopt helper function to bpf") Signed-off-by:
Yafang Shao <laoar.shao@gmail.com> Acked-by:
Lawrence Brakmo <brakmo@fb.com> Signed-off-by:
-
Madalin Bucur authored
[ Upstream commit 89857a8a ] By clearing all interrupt sources, not only those that already occurred, the existing code may acknowledge by mistake interrupts that occurred after the code checks for them. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
Roy Pledge <roy.pledge@nxp.com> Signed-off-by:
Li Yang <leoyang.li@nxp.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 97f26702 ] SCIF2 on R-Car M3-W can be used with both DMAC1 and DMAC2. Fixes: dbcae5ea ("arm64: dts: r8a7796: Enable SCIF DMA") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit ef4a55b9 ] We're now getting the following error: genirq: Setting trigger mode 1 for irq 230 failed (regmap_irq_set_type+0x0/0x15c) cpcap-usb-phy cpcap-usb-phy.0: could not get irq dp: -524 Cc: Sebastian Reichel <sre@kernel.org> Reported-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Ian Kent authored
[ Upstream commit f585b283 ] In autofs_fill_super() on error of get inode/make root dentry the return should be ENOMEM as this is the only failure case of the called functions. Link: http://lkml.kernel.org/r/154725123240.11260.796773942606871359.stgit@pluto-themaw-netSigned-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 63ce5f55 ] autofs_expire_run() calls dput(dentry) to drop the reference count of dentry. However, dentry is read via autofs_dentry_ino(dentry) after that. This may result in a use-free-bug. The patch drops the reference count of dentry only when it is never used. Link: http://lkml.kernel.org/r/154725122396.11260.16053424107144453867.stgit@pluto-themaw-netSigned-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Jan Kara authored
[ Upstream commit c27d82f5 ] When superblock has lots of inodes without any pagecache (like is the case for /proc), drop_pagecache_sb() will iterate through all of them without dropping sb->s_inode_list_lock which can lead to softlockups (one of our customers hit this). Fix the problem by going to the slow path and doing cond_resched() in case the process needs rescheduling. Link: http://lkml.kernel.org/r/20190114085343.15011-1-jack@suse.czSigned-off-by:
Jan Kara <jack@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
-
Dan Carpenter authored
[ Upstream commit db7ddeab ] There is a copy and paste bug so we set "config->test_driver" to NULL twice instead of setting "config->test_fs". Smatch complains that it leads to a double free: lib/test_kmod.c:840 __kmod_config_init() warn: 'config->test_fs' double freed Link: http://lkml.kernel.org/r/20190121140011.GA14283@kadam Fixes: d9c6a72d ("kmod: add test driver to stress test the module loader") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
Mikhail Zaslonko authored
[ Upstream commit 24feb47c ] If memory end is not aligned with the sparse memory section boundary, the mapping of such a section is only partly initialized. This may lead to VM_BUG_ON due to uninitialized struct pages access from test_pages_in_a_zone() function triggered by memory_hotplug sysfs handlers. Here are the the panic examples: CONFIG_DEBUG_VM_PGFLAGS=y kernel parameter mem=2050M -------------------------- page:000003d082008000 is uninitialized and poisoned page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) Call Trace: test_pages_in_a_zone+0xde/0x160 show_valid_zones+0x5c/0x190 dev_attr_show+0x34/0x70 sysfs_kf_seq_show+0xc8/0x148 seq_read+0x204/0x480 __vfs_read+0x32/0x178 vfs_read+0x82/0x138 ksys_read+0x5a/0xb0 system_call+0xdc/0x2d8 Last Breaking-Event-Address: test_pages_in_a_zone+0xde/0x160 Kernel panic - not syncing: Fatal exception: panic_on_oops Fix this by checking whether the pfn to check is within the zone. [mhocko@suse.com: separated this change from http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com] Link: http://lkml.kernel.org/r/20190128144506.15603-3-mhocko@kernel.org [mhocko@suse.com: separated this change from http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com] Signed-off-by:
Mikhail Zaslonko <zaslonko@linux.ibm.com> Tested-by:
Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reviewed-by:
Oscar Salvador <osalvador@suse.de> Tested-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by:
-
Michal Hocko authored
[ Upstream commit efad4e47 ] Patch series "mm, memory_hotplug: fix uninitialized pages fallouts", v2. Mikhail Zaslonko has posted fixes for the two bugs quite some time ago [1]. I have pushed back on those fixes because I believed that it is much better to plug the problem at the initialization time rather than play whack-a-mole all over the hotplug code and find all the places which expect the full memory section to be initialized. We have ended up with commit 2830bf6f ("mm, memory_hotplug: initialize struct pages for the full memory section") merged and cause a regression [2][3]. The reason is that there might be memory layouts when two NUMA nodes share the same memory section so the merged fix is simply incorrect. In order to plug this hole we really have to be zone range aware in those handlers. I have split up the original patch into two. One is unchanged (patch 2) and I took a different approach for `removable' crash. [1] http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com [2] https://bugzilla.redhat.com/show_bug.cgi?id=1666948 [3] http://lkml.kernel.org/r/20190125163938.GA20411@dhcp22.suse.cz This patch (of 2): Mikhail has reported the following VM_BUG_ON triggered when reading sysfs removable state of a memory block: page:000003d08300c000 is uninitialized and poisoned page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) Call Trace: is_mem_section_removable+0xb4/0x190 show_mem_removable+0x9a/0xd8 dev_attr_show+0x34/0x70 sysfs_kf_seq_show+0xc8/0x148 seq_read+0x204/0x480 __vfs_read+0x32/0x178 vfs_read+0x82/0x138 ksys_read+0x5a/0xb0 system_call+0xdc/0x2d8 Last Breaking-Event-Address: is_mem_section_removable+0xb4/0x190 Kernel panic - not syncing: Fatal exception: panic_on_oops The reason is that the memory block spans the zone boundary and we are stumbling over an unitialized struct page. Fix this by enforcing zone range in is_mem_section_removable so that we never run away from a zone. Link: http://lkml.kernel.org/r/20190128144506.15603-2-mhocko@kernel.orgSigned-off-by:
-
Qian Cai authored
[ Upstream commit a8e911d1 ] If the kernel is configured with KASAN_EXTRA, the stack size is increasted significantly because this option sets "-fstack-reuse" to "none" in GCC [1]. As a result, it triggers stack overrun quite often with 32k stack size compiled using GCC 8. For example, this reproducer https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/madvise/madvise06.c triggers a "corrupted stack end detected inside scheduler" very reliably with CONFIG_SCHED_STACK_END_CHECK enabled. There are just too many functions that could have a large stack with KASAN_EXTRA due to large local variables that have been called over and over again without being able to reuse the stacks. Some noticiable ones are size 7648 shrink_page_list 3584 xfs_rmap_convert 3312 migrate_page_move_mapping 3312 dev_ethtool 3200 migrate_misplaced_transhuge_page 3168 copy_process There are other 49 functions are over 2k in size while compiling kernel with "-Wframe-larger-than=" even with a related minimal config on this machine. Hence, it is too much work to change Makefiles for each object to compile without "-fsanitize-address-use-after-scope" individually. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715#c23 Although there is a patch in GCC 9 to help the situation, GCC 9 probably won't be released in a few months and then it probably take another 6-month to 1-year for all major distros to include it as a default. Hence, the stack usage with KASAN_EXTRA can be revisited again in 2020 when GCC 9 is everywhere. Until then, this patch will help users avoid stack overrun. This has already been fixed for arm64 for the same reason via 6e883067 ("arm64: kasan: Increase stack size for KASAN_EXTRA"). Link: http://lkml.kernel.org/r/20190109215209.2903-1-cai@lca.pwSigned-off-by:
Qian Cai <cai@lca.pw> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Kairui Song authored
[ Upstream commit 2aa958c9 ] Kexec-ing a kernel with "efi=noruntime" on the first kernel's command line causes the following null pointer dereference: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] Call Trace: efi_runtime_map_copy+0x28/0x30 bzImage64_load+0x688/0x872 arch_kexec_kernel_image_load+0x6d/0x70 kimage_file_alloc_init+0x13e/0x220 __x64_sys_kexec_file_load+0x144/0x290 do_syscall_64+0x55/0x1a0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Just skip the EFI info setup if EFI runtime services are not enabled. [ bp: Massage commit message. ] Suggested-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
Kairui Song <kasong@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
-
John Johansen authored
[ Upstream commit d6d478ae ] aa_label_merge() can return NULL for memory allocations failures make sure to handle and set the correct error in this case. Reported-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
-
James Morse authored
[ Upstream commit f2b3d856 ] On systems with VHE the kernel and KVM's world-switch code run at the same exception level. Code that is only used on a VHE system does not need to be annotated as __hyp_text as it can reside anywhere in the kernel text. __hyp_text was also used to prevent kprobes from patching breakpoint instructions into this region, as this code runs at a different exception level. While this is no longer true with VHE, KVM still switches VBAR_EL1, meaning a kprobe's breakpoint executed in the world-switch code will cause a hyp-panic. Move the __hyp_text check in the kprobes blacklist so it applies on VHE systems too, to cover the common code and guest enter/exit assembly. Fixes: 888b3c87 ("arm64: Treat all entry code as non-kprobe-able") Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
James Morse <james.morse@arm.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Thomas Lendacky authored
[ Upstream commit 912139cf ] The load_microcode_amd() function searches for microcode patches and attempts to apply a microcode patch if it is of different level than the currently installed level. While the processor won't actually load a level that is less than what is already installed, the logic wrongly returns UCODE_NEW thus signaling to its caller reload_store() that a late loading should be attempted. If the file-system contains an older microcode revision than what is currently running, such a late microcode reload can result in these misleading messages: x86/CPU: CPU features have changed after loading microcode, but might not take effect. x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update. These messages were issued on a system where SME/SEV are not enabled by the BIOS (MSR C001_0010[23] = 0b) because during boot, early_detect_mem_encrypt() is called and cleared the SME and SEV features in this case. However, after the wrong late load attempt, get_cpu_cap() is called and reloads the SME and SEV feature bits, resulting in the messages. Update the microcode level check to not attempt microcode loading if the current level is greater than(!) and not only equal to the current patch level. [ bp: massage commit message. ] Fixes: 2613f36e ("x86/microcode: Attempt late loading only when new microcode is present") Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Ronnie Sahlberg authored
[ Upstream commit 58d15ed1 ] The size of the fixed part of the create response is 88 bytes not 56. Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Sinan Kaya authored
[ Upstream commit 0ee4b5f8 ] Add BACKLIGHT_LCD_SUPPORT for SAMSUNG_Q10 to fix the warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE. SAMSUNG_Q10 selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_LCD_SUPPORT. Copy BACKLIGHT_LCD_SUPPORT dependency into SAMSUNG_Q10 to fix: WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n] Selected by [y]: - SAMSUNG_Q10 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] Signed-off-by:
Sinan Kaya <okaya@kernel.org> Acked-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 8437fcf1 ] The "hostdata->dev" pointer is NULL here. We set "hostdata->dev = dev;" later in the function and we also use "hostdata->dev" when we call dma_free_attrs() in NCR_700_release(). This bug predates git version control. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Ming Lu authored
[ Upstream commit 5d8fc4a9 ] The issue to be fixed in this commit is when libfc found it received a invalid FLOGI response from FC switch, it would return without freeing the fc frame, which is just the skb data. This would cause memory leak if FC switch keeps sending invalid FLOGI responses. This fix is just to make it execute `fc_frame_free(fp)` before returning from function `fc_lport_flogi_resp`. Signed-off-by:
Ming Lu <ming.lu@citrix.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Manish Chopra authored
[ Upstream commit ffb057f9 ] KASAN reported following bug in qed_init_qm_get_idx_from_flags due to inappropriate casting of "pq_flags". Fix the type of "pq_flags". [ 196.624707] BUG: KASAN: stack-out-of-bounds in qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed] [ 196.624712] Read of size 8 at addr ffff809b00bc7360 by task kworker/0:9/1712 [ 196.624714] [ 196.624720] CPU: 0 PID: 1712 Comm: kworker/0:9 Not tainted 4.18.0-60.el8.aarch64+debug #1 [ 196.624723] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL024 09/26/2018 [ 196.624733] Workqueue: events work_for_cpu_fn [ 196.624738] Call trace: [ 196.624742] dump_backtrace+0x0/0x2f8 [ 196.624745] show_stack+0x24/0x30 [ 196.624749] dump_stack+0xe0/0x11c [ 196.624755] print_address_description+0x68/0x260 [ 196.624759] kasan_report+0x178/0x340 [ 196.624762] __asan_report_load_n_noabort+0x38/0x48 [ 196.624786] qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed] [ 196.624808] qed_init_qm_info+0xec0/0x2200 [qed] [ 196.624830] qed_resc_alloc+0x284/0x7e8 [qed] [ 196.624853] qed_slowpath_start+0x6cc/0x1ae8 [qed] [ 196.624864] __qede_probe.isra.10+0x1cc/0x12c0 [qede] [ 196.624874] qede_probe+0x78/0xf0 [qede] [ 196.624879] local_pci_probe+0xc4/0x180 [ 196.624882] work_for_cpu_fn+0x54/0x98 [ 196.624885] process_one_work+0x758/0x1900 [ 196.624888] worker_thread+0x4e0/0xd18 [ 196.624892] kthread+0x2c8/0x350 [ 196.624897] ret_from_fork+0x10/0x18 [ 196.624899] [ 196.624902] Allocated by task 2: [ 196.624906] kasan_kmalloc.part.1+0x40/0x108 [ 196.624909] kasan_kmalloc+0xb4/0xc8 [ 196.624913] kasan_slab_alloc+0x14/0x20 [ 196.624916] kmem_cache_alloc_node+0x1dc/0x480 [ 196.624921] copy_process.isra.1.part.2+0x1d8/0x4a98 [ 196.624924] _do_fork+0x150/0xfa0 [ 196.624926] kernel_thread+0x48/0x58 [ 196.624930] kthreadd+0x3a4/0x5a0 [ 196.624932] ret_from_fork+0x10/0x18 [ 196.624934] [ 196.624937] Freed by task 0: [ 196.624938] (stack is not available) [ 196.624940] [ 196.624943] The buggy address belongs to the object at ffff809b00bc0000 [ 196.624943] which belongs to the cache thread_stack of size 32768 [ 196.624946] The buggy address is located 29536 bytes inside of [ 196.624946] 32768-byte region [ffff809b00bc0000, ffff809b00bc8000) [ 196.624948] The buggy address belongs to the page: [ 196.624952] page:ffff7fe026c02e00 count:1 mapcount:0 mapping:ffff809b4001c000 index:0x0 compound_mapcount: 0 [ 196.624960] flags: 0xfffff8000008100(slab|head) [ 196.624967] raw: 0fffff8000008100 dead000000000100 dead000000000200 ffff809b4001c000 [ 196.624970] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 [ 196.624973] page dumped because: kasan: bad access detected [ 196.624974] [ 196.624976] Memory state around the buggy address: [ 196.624980] ffff809b00bc7200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624983] ffff809b00bc7280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624985] >ffff809b00bc7300: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 [ 196.624988] ^ [ 196.624990] ffff809b00bc7380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624993] ffff809b00bc7400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624995] ================================================================== Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
-
Manish Chopra authored
[ Upstream commit 7c81626a ] Cache number of fragments in the skb locally as in case of linear skb (with zero fragments), tx completion (or freeing of skb) may happen before driver tries to get number of frgaments from the skb which could lead to stale access to an already freed skb. Signed-off-by:
-
