- 07 Oct, 2021 4 commits
-
-
Johan Almbladh authored
This patch adds new tests for the two-instruction LD_IMM64. The new tests verify the operation with immediate values of different byte patterns. Mainly intended to cover JITs that want to be clever when loading 64-bit constants. Signed-off-by:
Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211007143006.634308-1-johan.almbladh@anyfinetworks.com
-
Johan Almbladh authored
This patch shaves off a few instructions when loading sparse 64-bit constants to register. The change is covered by additional tests in lib/test_bpf.c. Signed-off-by:
-
Johan Almbladh authored
This patch removes a stale Makefile reference to the cBPF JIT that was removed. Fixes: ebcbacfa ("mips, bpf: Remove old BPF JIT implementations") Signed-off-by:
-
Jie Meng authored
Introduce a single reg version of maybe_emit_mod() and factor out common code in more cases. Signed-off-by:
Jie Meng <jmeng@fb.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20211006194135.608932-1-jmeng@fb.com
-
- 06 Oct, 2021 31 commits
-
-
Andrii Nakryiko authored
Hengqi Chen says: ==================== bpf_{map,program}__{prev,next} don't follow the libbpf API naming convention. Deprecate them and replace them with a new set of APIs named bpf_object__{prev,next}_{program,map}. v1->v2: [0] * Addressed Andrii's comments [0]: https://patchwork.kernel.org/project/netdevbpf/patch/20210906165456.325999-1-hengqi.chen@gmail.com/ ==================== Signed-off-by:Andrii Nakryiko <andrii@kernel.org>
-
Hengqi Chen authored
BPF objects are not reloadable after unload. Users are expected to use bpf_object__close() to unload and free up resources in one operation. No need to expose bpf_object__unload() as a public API, deprecate it ([0]). Add bpf_object__unload() as an alias to internal bpf_object_unload() and replace all bpf_object__unload() uses to avoid compilation errors. [0] Closes: https://github.com/libbpf/libbpf/issues/290Signed-off-by:
Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by:
-
Hengqi Chen authored
Replace deprecated bpf_{map,program}__next APIs with newly added bpf_object__next_{map,program} APIs, so that no compilation warnings emit. Signed-off-by: -
Grant Seltzer authored
This adds a section to the documentation for libbpf naming convention which describes how to document API features in libbpf, specifically the format of which API doc comments need to conform to. Signed-off-by:
Grant Seltzer <grantseltzer@gmail.com> Signed-off-by:
-
Hengqi Chen authored
Deprecate bpf_{map,program}__{prev,next} APIs. Replace them with a new set of APIs named bpf_object__{prev,next}_{program,map} which follow the libbpf API naming convention ([0]). No functionality changes. [0] Closes: https://github.com/libbpf/libbpf/issues/296Signed-off-by: -
Jiri Olsa authored
Currently the recursion test is hooking __htab_map_lookup_elem function, which is invoked both from bpf_prog and bpf syscall. But in our kernel build, the __htab_map_lookup_elem gets inlined within the htab_map_lookup_elem, so it's not trigered and the test fails. Fixing this by using htab_map_delete_elem, which is not inlined for bpf_prog calls (like htab_map_lookup_elem is) and is used directly as pointer for map_delete_elem, so it won't disappear by inlining. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
-
Quentin Monnet authored
Recent-ish versions of make do no longer consider number signs ("#") as comment symbols when they are inserted inside of a macro reference or in a function invocation. In such cases, the symbols should not be escaped. There are a few occurrences of "\#" in libbpf's and samples' Makefiles. In the former, the backslash is harmless, because grep associates no particular meaning to the escaped symbol and reads it as a regular "#". In samples' Makefile, recent versions of make will pass the backslash down to the compiler, making the probe fail all the time and resulting in the display of a warning about "make headers_install" being required, even after headers have been installed. A similar issue has been addressed at some other locations by commit 9564a8cf ("Kbuild: fix # escaping in .cmd files for future Make"). Let's address it for libbpf's and samples' Makefiles in the same fashion, by using a "$(pound)" variable (pulled from tools/scripts/Makefile.include for libbpf, or re-defined for the samples). Reference for the change in make: https://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57 Fixes: 2f383041 ("libbpf: Make libbpf_version.h non-auto-generated") Fixes: 07c3bbdb ("samples: bpf: print a warning about headers_install") Signed-off-by:Quentin Monnet <quentin@isovalent.com> Signed-off-by:
-
Daniel Borkmann authored
The BPF core defines a __weak bpf_jit_compile() dummy function already which should only be overridden by JITs if they actually implement a legacy cBPF JIT. Given arm implements an eBPF JIT, this stub is not needed. Now that MIPS cBPF JIT is finally gone, the only JIT left that is still implementing bpf_jit_compile() is the sparc32 one. Signed-off-by:
-
Daniel Borkmann authored
Johan Almbladh says: ==================== This is an implementation of an eBPF JIT for MIPS I-V and MIPS32/64 r1-r6. The new JIT is written from scratch, but uses the same overall structure as other eBPF JITs. Before, the MIPS JIT situation looked like this. - 32-bit: MIPS32, cBPF-only, tests fail - 64-bit: MIPS64r2-r6, eBPF, tests fail, incomplete eBPF ISA support The new JIT implementation raises the bar to the following level. - 32/64-bit: all MIPS ISA, eBPF, all tests pass, full eBPF ISA support Overview -------- The implementation supports all 32-bit and 64-bit eBPF instructions defined as of this writing, including the recently-added atomics. It is intended to provide good performance for native word size operations, while also being complete so the JIT never has to fall back to the interpreter. The new JIT replaces the current cBPF and eBPF JITs for MIPS. The implementation is divided into separate files as follows. The source files contains comments describing internal mechanisms and details on things like eBPF-to-CPU register mappings, so I won't repeat that here. - jit_comp.[ch] code shared between 32-bit and 64-bit JITs - jit_comp32.c 32-bit JIT implementation - jit_comp64.c 64-bit JIT implementation Both the 32-bit and 64-bit versions map all eBPF registers to native MIPS CPU registers. There are also enough unmapped CPU registers available to allow all eBPF operations implemented natively by the JIT to use only CPU registers without having to resort to stack scratch space. Some operations are deemed too complex to implement natively in the JIT. Those are instead implemented as a function call to a helper that performs the operation. This is done in the following cases. - 64-bit div and mod on a 32-bit CPU - 64-bit atomics on a 32-bit CPU - 32-bit atomics on a 32-bit CPU that lacks ll/sc instructions CPU errata workarounds ---------------------- The JIT implements workarounds for R10000, Loongson-2F and Loongson-3 CPU errata. For the Loongson workarounds, I have used the public information available on the matter. Link: https://sourceware.org/legacy-ml/binutils/2009-11/msg00387.html Testing ------- During the development of the JIT, I have added a number of new test cases to the test_bpf.ko test suite to be able to verify correctness of JIT implementations in a more systematic way. The new additions increase the test suite roughly three-fold, with many of the new tests being very extensive and even exhaustive when feasible. Link: https://lore.kernel.org/bpf/20211001130348.3670534-1-johan.almbladh@anyfinetworks.com/ Link: https://lore.kernel.org/bpf/20210914091842.4186267-1-johan.almbladh@anyfinetworks.com/ Link: https://lore.kernel.org/bpf/20210809091829.810076-1-johan.almbladh@anyfinetworks.com/ The JIT has been tested by running the test_bpf.ko test suite in QEMU with the following MIPS ISAs, in both big and little endian mode, with and without JIT hardening enabled. MIPS32r2, MIPS32r6, MIPS64r2, MIPS64r6 For the QEMU r2 targets, the correctness of pre-r2 code emitted has been tested by manually overriding each of the following macros with 0. cpu_has_llsc, cpu_has_mips_2, cpu_has_mips_r1, cpu_has_mips_r2 Similarly, CPU errata workaround code has been tested by enabling the each of the following configurations for the MIPS64r2 targets. CONFIG_WAR_R10000 CONFIG_CPU_LOONGSON3_WORKAROUNDS CONFIG_CPU_NOP_WORKAROUNDS CONFIG_CPU_JUMP_WORKAROUNDS The JIT passes all tests in all configurations. Below is the summary for MIPS32r2 in little endian mode. test_bpf: Summary: 1006 PASSED, 0 FAILED, [994/994 JIT'ed] test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [8/8 JIT'ed] test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED According to MIPS ISA reference documentation, the result of a 32-bit ALU arithmetic operation on a 64-bit CPU is unpredictable if an operand register value is not properly sign-extended to 64 bits. To verify the code emitted by the JIT, the code generation engine in QEMU was modifed to flip all low 32 bits if the above condition was not met. With this trip-wire installed, the kernel booted properly in qemu-system-mips64el and all test_bpf.ko tests passed. Remaining features ------------------ While the JIT is complete is terms of eBPF ISA support, this series does not include support for BPF-to-BPF calls and BPF trampolines. Those features are planned to be added in another patch series. The BPF_ST | BPF_NOSPEC instruction currently emits nothing. This is consistent with the behavior if the MIPS interpreter and the existing eBPF JIT. Why not build on the existing eBPF JIT? --------------------------------------- The existing eBPF JIT was originally written for MIPS64. An effort was made to add MIPS32 support to it in commit 716850ab ("MIPS: eBPF: Initial eBPF support for MIPS32 architecture."). That turned out to contain a number of flaws, so eBPF support for MIPS32 was disabled in commit 36366e36 ("MIPS: BPF: Restore MIPS32 cBPF JIT"). Link: https://lore.kernel.org/bpf/5deaa994.1c69fb81.97561.647e@mx.google.com/ The current eBPF JIT for MIPS64 lacks a lot of functionality regarding ALU32, JMP32 and atomic operations. It also lacks 32-bit CPU support on a fundamental level, for example 32-bit CPU register mappings and o32 ABI calling conventions. For optimization purposes, it tracks register usage through the program control flow in order to do zero-extension and sign- extension only when necessary, a static analysis of sorts. In my opinion, having this kind of complexity in JITs, and for which there is not adequate test coverage, is a problem. Such analysis should be done by the verifier, if needed at all. Finally, when I run the BPF test suite test_bpf.ko on the current JIT, there are errors and warnings. I believe that an eBPF JIT should strive to be correct, complete and optimized, and in that order. The JIT runs after the verifer has audited the program and given its approval. If the JIT then emits code that does something else, it will undermine the eBPF security model. A simple implementation is easier to get correct than a complex one. Furthermore, the real performance hit is not an extra CPU instruction here and there, but when the JIT bails on an unimplemented eBPF instruction and cause the whole program to fall back to the interpreter. My reasoning here boils down to the following. * The JIT should not contain a static analyzer that tracks branches. * It is acceptable to emit possibly superfluous sign-/zero-extensions for ALU32 and JMP32 operations on a 64-bit MIPS to guarantee correctness. * The JIT should handle all eBPF instructions on all MIPS CPUs. I conclude that the current eBPF MIPS JIT is complex, incomplete and incorrect. For the reasons stated above, I decided to not use the existing JIT implementation. ==================== Signed-off-by:
-
Johan Almbladh authored
This patch removes the old 32-bit cBPF and 64-bit eBPF JIT implementations. They are replaced by a new eBPF implementation that supports both 32-bit and 64-bit MIPS CPUs. Signed-off-by:
-
Johan Almbladh authored
This patch enables the new eBPF JITs for 32-bit and 64-bit MIPS. It also disables the old cBPF JIT to so cBPF programs are converted to use the new JIT. Workarounds for R4000 CPU errata are not implemented by the JIT, so the JIT is disabled if any of those workarounds are configured. Signed-off-by:
-
Johan Almbladh authored
This patch adds workarounds for the following CPU errata to the MIPS eBPF JIT, if enabled in the kernel configuration. - R10000 ll/sc weak ordering - Loongson-3 ll/sc weak ordering - Loongson-2F jump hang The Loongson-2F nop errata is implemented in uasm, which the JIT uses, so no additional mitigations are needed for that. Signed-off-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Link: https://lore.kernel.org/bpf/20211005165408.2305108-6-johan.almbladh@anyfinetworks.com
-
Johan Almbladh authored
This is an implementation on of an eBPF JIT for 64-bit MIPS III-V and MIPS64r1-r6. It uses the same framework introduced by the 32-bit JIT. Signed-off-by:
-
Johan Almbladh authored
This is an implementation of an eBPF JIT for 32-bit MIPS I-V and MIPS32. The implementation supports all 32-bit and 64-bit ALU and JMP operations, including the recently-added atomics. 64-bit div/mod and 64-bit atomics are implemented using function calls to math64 and atomic64 functions, respectively. All 32-bit operations are implemented natively by the JIT, except if the CPU lacks ll/sc instructions. Register mapping ================ All 64-bit eBPF registers are mapped to native 32-bit MIPS register pairs, and does not use any stack scratch space for register swapping. This means that all eBPF register data is kept in CPU registers all the time, and this simplifies the register management a lot. It also reduces the JIT's pressure on temporary registers since we do not have to move data around. Native register pairs are ordered according to CPU endiannes, following the O32 calling convention for passing 64-bit arguments and return values. The eBPF return value, arguments and callee-saved registers are mapped to their native MIPS equivalents. Since the 32 highest bits in the eBPF FP (frame pointer) register are always zero, only one general-purpose register is actually needed for the mapping. The MIPS fp register is used for this purpose. The high bits are mapped to MIPS register r0. This saves us one CPU register, which is much needed for temporaries, while still allowing us to treat the R10 (FP) register just like any other eBPF register in the JIT. The MIPS gp (global pointer) and at (assembler temporary) registers are used as internal temporary registers for constant blinding. CPU registers t6-t9 are used internally by the JIT when constructing more complex 64-bit operations. This is precisely what is needed - two registers to store an operand value, and two more as scratch registers when performing the operation. The register mapping is shown below. R0 - $v1, $v0 return value R1 - $a1, $a0 argument 1, passed in registers R2 - $a3, $a2 argument 2, passed in registers R3 - $t1, $t0 argument 3, passed on stack R4 - $t3, $t2 argument 4, passed on stack R5 - $t4, $t3 argument 5, passed on stack R6 - $s1, $s0 callee-saved R7 - $s3, $s2 callee-saved R8 - $s5, $s4 callee-saved R9 - $s7, $s6 callee-saved FP - $r0, $fp 32-bit frame pointer AX - $gp, $at constant-blinding $t6 - $t9 unallocated, JIT temporaries Jump offsets ============ The JIT tries to map all conditional JMP operations to MIPS conditional PC-relative branches. The MIPS branch offset field is 18 bits, in bytes, which is equivalent to the eBPF 16-bit instruction offset. However, since the JIT may emit more than one CPU instruction per eBPF instruction, the field width may overflow. If that happens, the JIT converts the long conditional jump to a short PC-relative branch with the condition inverted, jumping over a long unconditional absolute jmp (j). This conversion will change the instruction offset mapping used for jumps, and may in turn result in more branch offset overflows. The JIT therefore dry-runs the translation until no more branches are converted and the offsets do not change anymore. There is an upper bound on this of course, and if the JIT hits that limit, the last two iterations are run with all branches being converted. Tail call count =============== The current tail call count is stored in the 16-byte area of the caller's stack frame that is reserved for the callee in the o32 ABI. The value is initialized in the prologue, and propagated to the tail-callee by skipping the initialization instructions when emitting the tail call. Signed-off-by: -
Johan Almbladh authored
This patch implements a workaround for the Loongson-2F nop in generated, code, if the existing option CONFIG_CPU_NOP_WORKAROUND is set. Before, the binutils option -mfix-loongson2f-nop was enabled, but no workaround was done when emitting MIPS code. Now, the nop pseudo instruction is emitted as "or ax,ax,zero" instead of the default "sll zero,zero,0". This is consistent with the workaround implemented by binutils. Signed-off-by:
-
Tony Ambardar authored
Enable the 'muhu' instruction, complementing the existing 'mulu', needed to implement a MIPS32 BPF JIT. Also fix a typo in the existing definition of 'dmulu'. Signed-off-by:
Tony Ambardar <Tony.Ambardar@gmail.com> Signed-off-by:
-
Andrii Nakryiko authored
Add a test that validates that btf__add_btf() API is correctly copying all the types from the source BTF into destination BTF object and adjusts type IDs and string offsets properly. Signed-off-by:
-
Andrii Nakryiko authored
Next patch will need to reuse BTF generation logic, which tests every supported BTF kind, for testing btf__add_btf() APIs. So restructure existing selftests and make it as a single subtest that uses bulk VALIDATE_RAW_BTF() macro for raw BTF dump checking. Signed-off-by:
-
Andrii Nakryiko authored
Add a bulk copying api, btf__add_btf(), that speeds up and simplifies appending entire contents of one BTF object to another one, taking care of copying BTF type data, adjusting resulting BTF type IDs according to their new locations in the destination BTF object, as well as copying and deduplicating all the referenced strings and updating all the string offsets in new BTF types as appropriate. This API is intended to be used from tools that are generating and otherwise manipulating BTFs generically, such as pahole. In pahole's case, this API is useful for speeding up parallelized BTF encoding, as it allows pahole to offload all the intricacies of BTF type copying to libbpf and handle the parallelization aspects of the process. Signed-off-by:
-
Jie Meng authored
Instead of unconditionally performing push/pop on %rax/%rdx in case of division/modulo, we can save a few bytes in case of destination register being either BPF r0 (%rax) or r3 (%rdx) since the result is written in there anyway. Also, we do not need to copy the source to %r11 unless the source is either %rax, %rdx or an immediate. For example, before the patch: 22: push %rax 23: push %rdx 24: mov %rsi,%r11 27: xor %edx,%edx 29: div %r11 2c: mov %rax,%r11 2f: pop %rdx 30: pop %rax 31: mov %r11,%rax After: 22: push %rdx 23: xor %edx,%edx 25: div %rsi 28: pop %rdx Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Andrey Ignatov authored
Similarly to 09772d92 ("bpf: avoid retpoline for lookup/update/delete calls on maps") and 84430d42 ("bpf, verifier: avoid retpoline for map push/pop/peek operation") avoid indirect call while calling bpf_for_each_map_elem. Before (a program fragment): ; if (rules_map) { 142: (15) if r4 == 0x0 goto pc+8 143: (bf) r3 = r10 ; bpf_for_each_map_elem(rules_map, process_each_rule, &ctx, 0); 144: (07) r3 += -24 145: (bf) r1 = r4 146: (18) r2 = subprog[+5] 148: (b7) r4 = 0 149: (85) call bpf_for_each_map_elem#143680 <-- indirect call via helper After (same program fragment): ; if (rules_map) { 142: (15) if r4 == 0x0 goto pc+8 143: (bf) r3 = r10 ; bpf_for_each_map_elem(rules_map, process_each_rule, &ctx, 0); 144: (07) r3 += -24 145: (bf) r1 = r4 146: (18) r2 = subprog[+5] 148: (b7) r4 = 0 149: (85) call bpf_for_each_array_elem#170336 <-- direct call On a benchmark that calls bpf_for_each_map_elem() once and does many other things (mostly checking fields in skb) with CONFIG_RETPOLINE=y it makes program faster. Before: ============================================================================ Benchmark.cpp time/iter iters/s ============================================================================ IngressMatchByRemoteEndpoint 80.78ns 12.38M IngressMatchByRemoteIP 80.66ns 12.40M IngressMatchByRemotePort 80.87ns 12.37M After: ============================================================================ Benchmark.cpp time/iter iters/s ============================================================================ IngressMatchByRemoteEndpoint 73.49ns 13.61M IngressMatchByRemoteIP 71.48ns 13.99M IngressMatchByRemotePort 70.39ns 14.21M Signed-off-by:
Andrey Ignatov <rdna@fb.com> Signed-off-by:
-
Alexei Starovoitov authored
Kumar Kartikeya says: ==================== This set enables kernel module function calls, and also modifies verifier logic to permit invalid kernel function calls as long as they are pruned as part of dead code elimination. This is done to provide better runtime portability for BPF objects, which can conditionally disable parts of code that are pruned later by the verifier (e.g. const volatile vars, kconfig options). libbpf modifications are made along with kernel changes to support module function calls. It also converts TCP congestion control objects to use the module kfunc support instead of relying on IS_BUILTIN ifdef. Changelog: ---------- v6 -> v7 v6: https://lore.kernel.org/bpf/20210930062948.1843919-1-memxor@gmail.com * Let __bpf_check_kfunc_call take kfunc_btf_id_list instead of generating callbacks (Andrii) * Rename it to bpf_check_mod_kfunc_call to reflect usage * Remove OOM checks (Alexei) * Remove resolve_btfids invocation for bpf_testmod (Andrii) * Move fd_array_cnt initialization near fd_array alloc (Andrii) * Rename helper to btf_find_by_name_kind and pass start_id (Andrii) * memset when data is NULL in add_data (Alexei) * Fix other nits v5 -> v6 v5: https://lore.kernel.org/bpf/20210927145941.1383001-1-memxor@gmail.com * Rework gen_loader relocation emits * Only emit bpf_btf_find_by_name_kind call when required (Alexei) * Refactor code to emit ksym var and func relo into separate helpers, this will be easier to add future weak/typeless ksym support to (for my followup) * Count references for both ksym var and funcs, and avoid calling helpers unless required for both of them. This also means we share fds between ksym vars for the module BTFs. Also be careful with this when closing BTF fd so that we only close one instance of the fd for each ksym v4 -> v5 v4: https://lore.kernel.org/bpf/20210920141526.3940002-1-memxor@gmail.com * Address comments from Alexei * Use reserved fd_array area in loader map instead of creating a new map * Drop selftest testing the 256 kfunc limit, however selftest testing reuse of BTF fd for same kfunc in gen_loader and libbpf is kept * Address comments from Andrii * Make --no-fail the default for resolve_btfids, i.e. only fail if we find BTF section and cannot process it * Use obj->btf_modules array to store index in the fd_array, so that we don't have to do any searching to reuse the index, instead only set it the first time a module BTF's fd is used * Make find_ksym_btf_id to return struct module_btf * in last parameter * Improve logging when index becomes bigger than INT16_MAX * Add btf__find_by_name_kind_own internal helper to only start searching for kfunc ID in module BTF, since find_ksym_btf_id already checks vmlinux BTF before iterating over module BTFs. * Fix various other nits * Fixes for failing selftests on BPF CI * Rearrange/cleanup selftests * Avoid testing kfunc limit (Alexei) * Do test gen_loader and libbpf BTF fd index dedup with 256 calls * Move invalid kfunc failure test to verifier selftest * Minimize duplication * Use consistent bpf_<type>_check_kfunc_call naming for module kfunc callback * Since we try to add fd using add_data while we can, cherry pick Alexei's patch from CO-RE RFC series to align gen_loader data. v3 -> v4 v3: https://lore.kernel.org/bpf/20210915050943.679062-1-memxor@gmail.com * Address comments from Alexei * Drop MAX_BPF_STACK change, instead move map_fd and BTF fd to BPF array map and pass fd_array using BPF_PSEUDO_MAP_IDX_VALUE * Address comments from Andrii * Fix selftest to store to variable for observing function call instead of printk and polluting CI logs * Drop use of raw_tp for testing, instead reuse classifier based prog_test_run * Drop index + 1 based insn->off convention for kfunc module calls * Expand selftests to cover more corner cases * Misc cleanups v2 -> v3 v2: https://lore.kernel.org/bpf/20210914123750.460750-1-memxor@gmail.com * Fix issues pointed out by Kernel Test Robot * Fix find_kfunc_desc to also take offset into consideration when comparing RFC v1 -> v2 v1: https://lore.kernel.org/bpf/20210830173424.1385796-1-memxor@gmail.com * Address comments from Alexei * Reuse fd_array instead of introducing kfunc_btf_fds array * Take btf and module reference as needed, instead of preloading * Add BTF_KIND_FUNC relocation support to gen_loader infrastructure * Address comments from Andrii * Drop hashmap in libbpf for finding index of existing BTF in fd_array * Preserve invalid kfunc calls only when the symbol is weak * Adjust verifier selftests ==================== Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
This adds selftests that tests the success and failure path for modules kfuncs (in presence of invalid kfunc calls) for both libbpf and gen_loader. It also adds a prog_test kfunc_btf_id_list so that we can add module BTF ID set from bpf_testmod. This also introduces a couple of test cases to verifier selftests for validating whether we get an error or not depending on if invalid kfunc call remains after elimination of unreachable instructions. Signed-off-by:
Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC relocations, with support for weak kfunc relocations. The general idea is to move map_fds to loader map, and also use the data for storing kfunc BTF fds. Since both reuse the fd_array parameter, they need to be kept together. For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc, we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more chances of being <= INT16_MAX than treating data map as a sparse array and adding fd as needed. When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse array model, so that as long as it does remain <= INT16_MAX, we pass an index relative to the start of fd_array. We store all ksyms in an array where we try to avoid calling the bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was already stored. This also speeds up the loading process compared to emitting calls in all cases, in later tests. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
Preserve these calls as it allows verifier to succeed in loading the program if they are determined to be unreachable after dead code elimination during program load. If not, the verifier will fail at runtime. This is done for ext->is_weak symbols similar to the case for variable ksyms. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
This patch adds libbpf support for kernel module function call support. The fd_array parameter is used during BPF program load to pass module BTFs referenced by the program. insn->off is set to index into this array, but starts from 1, because insn->off as 0 is reserved for btf_vmlinux. We try to use existing insn->off for a module, since the kernel limits the maximum distinct module BTFs for kfuncs to 256, and also because index must never exceed the maximum allowed value that can fit in insn->off (INT16_MAX). In the future, if kernel interprets signed offset as unsigned for kfunc calls, this limit can be increased to UINT16_MAX. Also introduce a btf__find_by_name_kind_own helper to start searching from module BTF's start id when we know that the BTF ID is not present in vmlinux BTF (in find_ksym_btf_id). Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
This commit moves BTF ID lookup into the newly added registration helper, in a way that the bbr, cubic, and dctcp implementation set up their sets in the bpf_tcp_ca kfunc_btf_set list, while the ones not dependent on modules are looked up from the wrapper function. This lifts the restriction for them to be compiled as built in objects, and can be loaded as modules if required. Also modify Makefile.modfinal to call resolve_btfids for each module. Note that since kernel kfunc_ids never overlap with module kfunc_ids, we only match the owner for module btf id sets. See following commits for background on use of: CONFIG_X86 ifdef: 569c484f (bpf: Limit static tcp-cc functions in the .BTF_ids list to x86) CONFIG_DYNAMIC_FTRACE ifdef: 7aae231a (bpf: tcp: Limit calling some tcp cc functions to CONFIG_DYNAMIC_FTRACE) Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
This commit allows specifying the base BTF for resolving btf id lists/sets during link time in the resolve_btfids tool. The base BTF is set to NULL if no path is passed. This allows resolving BTF ids for module kernel objects. Also, drop the --no-fail option, as it is only used in case .BTF_ids section is not present, instead make no-fail the default mode. The long option name is same as that of pahole. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
This adds helpers for registering btf_id_set from modules and the bpf_check_mod_kfunc_call callback that can be used to look them up. With in kernel sets, the way this is supposed to work is, in kernel callback looks up within the in-kernel kfunc whitelist, and then defers to the dynamic BTF set lookup if it doesn't find the BTF id. If there is no in-kernel BTF id set, this callback can be used directly. Also fix includes for btf.h and bpfptr.h so that they can included in isolation. This is in preparation for their usage in tcp_bbr, tcp_cubic and tcp_dctcp modules in the next patch. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
This patch also modifies the BPF verifier to only return error for invalid kfunc calls specially marked by userspace (with insn->imm == 0, insn->off == 0) after the verifier has eliminated dead instructions. This can be handled in the fixup stage, and skip processing during add and check stages. If such an invalid call is dropped, the fixup stage will not encounter insn->imm as 0, otherwise it bails out and returns an error. This will be exposed as weak ksym support in libbpf in later patches. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
This change adds support on the kernel side to allow for BPF programs to call kernel module functions. Userspace will prepare an array of module BTF fds that is passed in during BPF_PROG_LOAD using fd_array parameter. In the kernel, the module BTFs are placed in the auxilliary struct for bpf_prog, and loaded as needed. The verifier then uses insn->off to index into the fd_array. insn->off 0 is reserved for vmlinux BTF (for backwards compat), so userspace must use an fd_array index > 0 for module kfunc support. kfunc_btf_tab is sorted based on offset in an array, and each offset corresponds to one descriptor, with a max limit up to 256 such module BTFs. We also change existing kfunc_tab to distinguish each element based on imm, off pair as each such call will now be distinct. Another change is to check_kfunc_call callback, which now include a struct module * pointer, this is to be used in later patch such that the kfunc_id and module pointer are matched for dynamically registered BTF sets from loadable modules, so that same kfunc_id in two modules doesn't lead to check_kfunc_call succeeding. For the duration of the check_kfunc_call, the reference to struct module exists, as it returns the pointer stored in kfunc_btf_tab. Signed-off-by:
-
- 05 Oct, 2021 5 commits
-
-
Jakub Kicinski authored
Merge tag 'for-net-next-2021-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add support for MediaTek MT7922 and MT7921 - Enable support for AOSP extention in Qualcomm WCN399x and Realtek 8822C/8852A. - Add initial support for link quality and audio/codec offload. - Rework of sockets sendmsg to avoid locking issues. - Add vhci suspend/resume emulation. ==================== Link: https://lore.kernel.org/r/20211001230850.3635543-1-luiz.dentz@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Convert usb drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) Manually checked these are either usbnet or pure etherdevs. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== mlx4: prep for constant dev->dev_addr This patch converts mlx4 for dev->dev_addr being const. It converts to use of common helpers but also removes some seemingly unnecessary idiosyncrasies. Please review. ==================== Signed-off-by: -
Jakub Kicinski authored
netdev->dev_addr will become const soon. Make sure all functions which pass it around mark appropriate args as const. Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
