- 22 Nov, 2018 5 commits
-
-
Petr Machata authored
When an external learning event collides with an user-added entry, the user-added entry shouldn't be taken over. Otherwise on an unlearn event the entry would be completely lost, even though the user added it by hand. Therefore skip update of FDB flags and state for these cases. This is in accordance with the bridge behavior. Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
The VXLAN driver needs to differentiate between FDB entries learned by the VXLAN driver, and those added by the user. The latter ones shouldn't be taken over by external learning events. This is in accordance with bridge behavior. Therefore, extend the flags bitfield to 16 bits and add a new private NTF flag to mark the user-added entries. This seems preferable to adding a dedicated boolean, because passing the flag, unlike passing e.g. a true, makes it clear what the meaning of the bit is. Signed-off-by:
-
Petr Machata authored
In a following patch, vxlan is extended to allow hardware FDB learning. For FDB entries learned this way, switchdev notifications should not be sent again, because the driver already knows about these entries. To that end, add an argument vxlan_fdb_notify() to determine whether the switchdev notifications should be sent. Propagate the argument to all call sites transitively, eventually passing true in all root calls. Signed-off-by:
-
Petr Machata authored
This argument is necessary for vxlan_fdb_delete(), the API of which is prescribed by ndo_fdb_del, but __vxlan_fdb_delete() doesn't need it. Therefore drop it. Signed-off-by:
-
Andrea Claudi authored
Fix comment typo rxfliterctrl -> rxfilterctrl Signed-off-by:
Andrea Claudi <aclaudi@redhat.com> Signed-off-by:
-
- 21 Nov, 2018 13 commits
-
-
David S. Miller authored
Michał Mirosław says: ==================== VLAN tag handling cleanup This is a cleanup set after VLAN_TAG_PRESENT removal. The CFI bit handling is made similar to how other tag fields are used. ==================== Signed-off-by: -
Michał Mirosław authored
Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Michał Mirosław authored
Replace open-coded bitfield manipulation with skb_vlan_tag_*() helpers. This also enables correctly passing of VLAN.CFI bit. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Michał Mirosław authored
Abstract CFI/DEI bit access consistently with other VLAN tag fields. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2018-11-20 This series contains updates to the ice driver only. Akeem updates the driver to determine whether or not to do auto-negotiation based on the VSI state. Bruce cleans up the control queue code to remove duplicate code. Take advantage of some compiler optimizations by making some structures constant, and also note that they cannot be modified. Cleaned up formatting issues and code comment that needed clarification. Fixed a potential NULL pointer dereference by adding a check. Jaroslaw adds a check to verify if memory was allocated or not. Yashaswini Raghuram fixes the driver to ensure we are not enabling the LAN_EN flag if the MAC in the MAC-VLAN is a unicast MAC, so that the unicast packets are not forwarded to the wire. Dave fixes the return value of ice_napi_poll() to be more useful in returning the work that was done and should only return 0 when no work was done. Anirudh does code comment cleanup, to make more consistent. ==================== Signed-off-by: -
David S. Miller authored
Merge branch 'dsa-microchip-Modify-KSZ9477-DSA-driver-in-preparation-to-add-other-KSZ-switch-drivers' Tristram Ha says: ==================== net: dsa: microchip: Modify KSZ9477 DSA driver in preparation to add other KSZ switch drivers This series of patches is to modify the original KSZ9477 DSA driver so that other KSZ switch drivers can be added and use the common code. There are several steps to accomplish this achievement. First is to rename some function names with a prefix to indicate chip specific function. Second is to move common code into header that can be shared. Last is to modify tag_ksz.c so that it can handle many tail tag formats used by different KSZ switch drivers. ksz_common.c will contain the common code used by all KSZ switch drivers. ksz9477.c will contain KSZ9477 code from the original ksz_common.c. ksz9477_spi.c is renamed from ksz_spi.c. ksz9477_reg.h is renamed from ksz_9477_reg.h. ksz_common.h is added to provide common code access to KSZ switch drivers. ksz_spi.h is added to provide common SPI access functions to KSZ SPI drivers. v4 - Patches were removed to concentrate on changing driver structure without adding new code. v3 - The phy_device structure is used to hold port link information - A structure is passed in ksz_xmit and ksz_rcv instead of function pointer - Switch offload forwarding is supported v2 - Initialize reg_mutex before use - The alu_mutex is only used inside chip specific functions v1 - Each patch in the set is self-contained - Use ksz9477 prefix to indicate KSZ9477 specific code ==================== Signed-off-by: -
Tristram Ha authored
Rename ksz_9477_reg.h to ksz9477_reg.h for consistency as the product name is always KSZ####. Signed-off-by:
Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by:
Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Tristram Ha authored
Break KSZ9477 DSA driver into two files in preparation to add more KSZ switch drivers. Add common functions in ksz_common.h so that other KSZ switch drivers can access code in ksz_common.c. Add ksz_spi.h for common functions used by KSZ switch SPI drivers. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Reviewed-by:
-
Tristram Ha authored
Rename ksz_spi.c to ksz9477_spi.c and update Kconfig in preparation to add more KSZ switch drivers. Signed-off-by:
-
Tristram Ha authored
Rename some functions with ksz9477 prefix to separate chip specific code from common code. Signed-off-by:
-
Tristram Ha authored
Clean up code according to patch check suggestions. Signed-off-by:
-
Tristram Ha authored
Replace license with GPL. Signed-off-by:
-
- 20 Nov, 2018 22 commits
-
-
Bruce Allan authored
A recent update to smatch is causing it to report the error "we previously assumed 'm_entry->vsi_list_info' could be null". Fix that. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anirudh Venkataramanan authored
In code comments, use Tx|Rx instead of tx|rx Signed-off-by:
-
Anirudh Venkataramanan authored
1. Fix several cases of double spacing 2. Fix typos 3. Capitalize abbreviations Signed-off-by:
-
Bruce Allan authored
Function signatures that do not exceed 80-characters should be on a single line. Signed-off-by:
-
Bruce Allan authored
Clean up number of formatting issues and a comment that could use clarification. Signed-off-by:
-
Dave Ertman authored
ice_napi_poll is hard-coded to return zero when it's done. It should instead return the work done (if any work was done). The only time it should return zero is if an interrupt or poll is handled and no work is performed. So change the return value to be the minimum of work done or budget-1. Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Signed-off-by:
-
Bruce Allan authored
Indicate these structs should not be modified and take advantage of some compiler optimizations by making these structs const. Signed-off-by:
-
In the action fields for a MAC-VLAN filter, do not set the LAN_EN flag if the MAC in the MAC-VLAN is unicast MAC. The unicast packets that match should not be forwarded to the wire. Signed-off-by:
Yashaswini Raghuram Prathivadi Bhayankaram <yashaswini.raghuram.prathivadi.bhayankaram@intel.com> Signed-off-by:
-
Jaroslaw Ilgiewicz authored
Added check of return value for ice_init_def_sw_recp(). Now we know if memory was correctly allocated. Signed-off-by:
Jaroslaw Ilgiewicz <jaroslaw.ilgiewicz@intel.com> Signed-off-by:
-
Bruce Allan authored
1. Assigning the register offset and mask values contains duplicate code that can easily be replaced with a macro. 2. Separate functions for freeing send queue and receive queue rings are not needed; replace with a single function that uses a pointer to the struct ice_ctl_q_ring structure as a parameter instead of a pointer to the struct ice_ctl_q_info structure. 3. Initializing register settings for both send queue and receive queue contains duplicate code that can easily be replaced with a helper function. 4. Separate functions for freeing send queue and receive queue buffers are not needed; duplicate code can easily be replaced with a macro. Signed-off-by:
-
Akeem G Abodunrin authored
If VSI state is up, we should do autoneg with link up, otherwise with link down. Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by:
-
Xue Chaojing authored
In rx_alloc_pkts(), there is a loop call of tasklet, which causes 100% cpu utilization, even no packets are being received. This patch fixes this bug. Signed-off-by:
Xue Chaojing <xuechaojing@huawei.com> Signed-off-by:
-
Xue Chaojing authored
In add_mac_addr(), if the MAC address is a muliticast address, it will not be set, which causes the network card fail to receive the multicast packet. This patch fixes this bug. Signed-off-by:
-
Xue Chaojing authored
In order to improve performance, this patch adds rx checksum offload for the HiNIC driver. Performance test(Iperf) shows more than 80% improvement in TCP streams. Signed-off-by:
-
Xue Chaojing authored
To improve performance, this patch uses bit operations to replace multiply and division operators. Signed-off-by:
-
Vadim Pasternak authored
Extend cooling device with cooling levels vector to allow more flexibility of PWM setting. Thermal zone algorithm operates with the numerical states for PWM setting. Each state is the index, defined in range from 0 to 10 and it's mapped to the relevant duty cycle value, which is written to PWM controller. With the current definition fan speed is set to 0% for state 0, 10% for state 1, and so on up to 100% for the maximum state 10. Some systems have limitation for the PWM speed minimum. For such systems PWM setting speed to 0% will just disable the ability to increase speed anymore and such device will be stall on zero speed. Cooling levels allow to configure state vector according to the particular system requirements. For example, if PWM speed is not allowed to be below 30%, cooling levels could be configured as 30%, 30%, 30%, 30%, 40%, 50% and so on. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Arjun Vynipadath authored
Null pointer dereference seen when cxgb4vf driver is unloaded without bringing up any interfaces, moving mac_hlist initialization to driver probe and free the mac_hlist in remove to fix the issue. Fixes: 24357e06 ("cxgb4vf: fix memleak in mac_hlist initialization") Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Eric Dumazet authored
Under stress, softirq rx handler often hits a socket owned by the user, and has to queue the packet into socket backlog. When this happens, skb dst refcount is taken before we escape rcu protected region. This is done from __sk_add_backlog() calling skb_dst_force(). Consumer will have to perform the opposite costly operation. AFAIK nothing in tcp stack requests the dst after skb was stored in the backlog. If this was the case, we would have had failures already since skb_dst_force() can end up clearing skb dst anyway. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David S. Miller authored
This has no value whatsoever. Signed-off-by: -
Eric Dumazet authored
There are two cases were we can avoid calling ktime_get_ns() : 1) Queue is empty. 2) Internal queue is not empty. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== gred: add offload support This series adds support for GRED offload in the nfp driver. So far we have only supported the RED Qdisc offload, but we need a way to differentiate traffic types e.g. based on DSCP marking. It may seem like PRIO+RED is a good match for this job, however, (a) we don't need strict priority behaviour of PRIO, and (b) PRIO uses the legacy way of mapping ToS fields to bands, which is quite awkward and limitting. The less commonly used GRED Qdisc is a better much for the scenario, it allows multiple sets of RED parameters and queue lengths to be maintained with a single FIFO queue. This is exactly how nfp offload behaves. We use a trivial u32 classifier to assign packets to virtual queues. There is also the minor advantage that GRED can't have its child changed, therefore limitting ways in which the configuration of SW path can diverge from HW offload. Last patch of the series adds support for (G)RED in non-ECN mode, where packets are dropped instead of marked. ==================== Signed-off-by: -
Jakub Kicinski authored
Original FW only allowed us to perform ECN marking. Newer releases also support plain old drop. Add the ability to configure drop policy. This is particularly useful in combination with GRED, because different bands can have different ECN marking setting. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
John Hurley <john.hurley@netronome.com> Signed-off-by:
-
