- 15 Nov, 2016 7 commits
-
-
Milton Miller authored
[ Upstream commit 1b0ff898 ] While the driver is probing the adapter, an error may occur before the netdev structure is allocated and attached to pci_dev. In this case, not only netdev isn't available, but the tg3 private structure is also not available as it is just math from the NULL pointer, so dereferences must be skipped. The following trace is seen when the error is triggered: [1.402247] Unable to handle kernel paging request for data at address 0x00001a99 [1.402410] Faulting instruction address: 0xc0000000007e33f8 [1.402450] Oops: Kernel access of bad area, sig: 11 [#1] [1.402481] SMP NR_CPUS=2048 NUMA PowerNV [1.402513] Modules linked in: [1.402545] CPU: 0 PID: 651 Comm: eehd Not tainted 4.4.0-36-generic #55-Ubuntu [1.402591] task: c000001fe4e42a20 ti: c000001fe4e88000 task.ti: c000001fe4e88000 [1.402742] NIP: c0000000007e33f8 LR: c0000000007e3164 CTR: c000000000595ea0 [1.402787] REGS: c000001fe4e8b790 TRAP: 0300 Not tainted (4.4.0-36-generic) [1.402832] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 28000422 XER: 20000000 [1.403058] CFAR: c000000000008468 DAR: 0000000000001a99 DSISR: 42000000 SOFTE: 1 GPR00: c0000000007e3164 c000001fe4e8ba10 c0000000015c5e00 0000000000000000 GPR04: 0000000000000001 0000000000000000 0000000000000039 0000000000000299 GPR08: 0000000000000000 0000000000000001 c000001fe4e88000 0000000000000006 GPR12: 0000000000000000 c00000000fb40000 c0000000000e6558 c000003ca1bffd00 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000000d52768 GPR24: c000000000d52740 0000000000000100 c000003ca1b52000 0000000000000002 GPR28: 0000000000000900 0000000000000000 c00000000152a0c0 c000003ca1b52000 [1.404226] NIP [c0000000007e33f8] tg3_io_error_detected+0x308/0x340 [1.404265] LR [c0000000007e3164] tg3_io_error_detected+0x74/0x340 This patch avoids the NULL pointer dereference by moving the access after the netdev NULL pointer check on tg3_io_error_detected(). Also, we add a check for netdev being NULL on tg3_io_resume() [suggested by Michael Chan]. Fixes: 0486a063 ("tg3: prevent ifup/ifdown during PCI error recovery") Fixes: dfc8f370 ("net/tg3: Release IRQs on permanent error") Tested-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by:
Milton Miller <miltonm@us.ibm.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikolay Aleksandrov authored
[ Upstream commit 2cf75070 ] Since the commit below the ipmr/ip6mr rtnl_unicast() code uses the portid instead of the previous dst_pid which was copied from in_skb's portid. Since the skb is new the portid is 0 at that point so the packets are sent to the kernel and we get scheduling while atomic or a deadlock (depending on where it happens) by trying to acquire rtnl two times. Also since this is RTM_GETROUTE, it can be triggered by a normal user. Here's the sleeping while atomic trace: [ 7858.212557] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ 7858.212748] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0 [ 7858.212881] 2 locks held by swapper/0/0: [ 7858.213013] #0: (((&mrt->ipmr_expire_timer))){+.-...}, at: [<ffffffff810fbbf5>] call_timer_fn+0x5/0x350 [ 7858.213422] #1: (mfc_unres_lock){+.....}, at: [<ffffffff8161e005>] ipmr_expire_process+0x25/0x130 [ 7858.213807] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc7+ #179 [ 7858.213934] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 7858.214108] 0000000000000000 ffff88005b403c50 ffffffff813a7804 0000000000000000 [ 7858.214412] ffffffff81a1338e ffff88005b403c78 ffffffff810a4a72 ffffffff81a1338e [ 7858.214716] 000000000000026c 0000000000000000 ffff88005b403ca8 ffffffff810a4b9f [ 7858.215251] Call Trace: [ 7858.215412] <IRQ> [<ffffffff813a7804>] dump_stack+0x85/0xc1 [ 7858.215662] [<ffffffff810a4a72>] ___might_sleep+0x192/0x250 [ 7858.215868] [<ffffffff810a4b9f>] __might_sleep+0x6f/0x100 [ 7858.216072] [<ffffffff8165bea3>] mutex_lock_nested+0x33/0x4d0 [ 7858.216279] [<ffffffff815a7a5f>] ? netlink_lookup+0x25f/0x460 [ 7858.216487] [<ffffffff8157474b>] rtnetlink_rcv+0x1b/0x40 [ 7858.216687] [<ffffffff815a9a0c>] netlink_unicast+0x19c/0x260 [ 7858.216900] [<ffffffff81573c70>] rtnl_unicast+0x20/0x30 [ 7858.217128] [<ffffffff8161cd39>] ipmr_destroy_unres+0xa9/0xf0 [ 7858.217351] [<ffffffff8161e06f>] ipmr_expire_process+0x8f/0x130 [ 7858.217581] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217785] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217990] [<ffffffff810fbc95>] call_timer_fn+0xa5/0x350 [ 7858.218192] [<ffffffff810fbbf5>] ? call_timer_fn+0x5/0x350 [ 7858.218415] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.218656] [<ffffffff810fde10>] run_timer_softirq+0x260/0x640 [ 7858.218865] [<ffffffff8166379b>] ? __do_softirq+0xbb/0x54f [ 7858.219068] [<ffffffff816637c8>] __do_softirq+0xe8/0x54f [ 7858.219269] [<ffffffff8107a948>] irq_exit+0xb8/0xc0 [ 7858.219463] [<ffffffff81663452>] smp_apic_timer_interrupt+0x42/0x50 [ 7858.219678] [<ffffffff816625bc>] apic_timer_interrupt+0x8c/0xa0 [ 7858.219897] <EOI> [<ffffffff81055f16>] ? native_safe_halt+0x6/0x10 [ 7858.220165] [<ffffffff810d64dd>] ? trace_hardirqs_on+0xd/0x10 [ 7858.220373] [<ffffffff810298e3>] default_idle+0x23/0x190 [ 7858.220574] [<ffffffff8102a20f>] arch_cpu_idle+0xf/0x20 [ 7858.220790] [<ffffffff810c9f8c>] default_idle_call+0x4c/0x60 [ 7858.221016] [<ffffffff810ca33b>] cpu_startup_entry+0x39b/0x4d0 [ 7858.221257] [<ffffffff8164f995>] rest_init+0x135/0x140 [ 7858.221469] [<ffffffff81f83014>] start_kernel+0x50e/0x51b [ 7858.221670] [<ffffffff81f82120>] ? early_idt_handler_array+0x120/0x120 [ 7858.221894] [<ffffffff81f8243f>] x86_64_start_reservations+0x2a/0x2c [ 7858.222113] [<ffffffff81f8257c>] x86_64_start_kernel+0x13b/0x14a Fixes: 2942e900 ("[RTNETLINK]: Use rtnl_unicast() for rtnetlink unicasts") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Lance Richardson authored
[ Upstream commit db32e4e4 ] Similar to commit 3be07244 ("ip6_gre: fix flowi6_proto value in xmit path"), set flowi6_proto to IPPROTO_GRE for output route lookup. Up until now, ip6gre_xmit_other() has set flowi6_proto to a bogus value. This affected output route lookup for packets sent on an ip6gretap device in cases where routing was dependent on the value of flowi6_proto. Since the correct proto is already set in the tunnel flowi6 template via commit 252f3f5a ("ip6_gre: Set flowi6_proto as IPPROTO_GRE in xmit path."), simply delete the line setting the incorrect flowi6_proto value. Suggested-by:
Jiri Benc <jbenc@redhat.com> Fixes: c12b395a ("gre: Support GRE over IPv6") Reviewed-by:
Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by:
Lance Richardson <lrichard@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 019b1c9f ] If DBGUNDO() is enabled (FASTRETRANS_DEBUG > 1), a compile error will happen, since inet6_sk(sk)->daddr became sk->sk_v6_daddr Fixes: efe4208f ("ipv6: make lookups simpler and faster") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Douglas Caetano dos Santos authored
[ Upstream commit 2fe664f1 ] With TCP MTU probing enabled and offload TX checksumming disabled, tcp_mtu_probe() calculated the wrong checksum when a fragment being copied into the probe's SKB had an odd length. This was caused by the direct use of skb_copy_and_csum_bits() to calculate the checksum, as it pads the fragment being copied, if needed. When this fragment was not the last, a subsequent call used the previous checksum without considering this padding. The effect was a stale connection in one way, as even retransmissions wouldn't solve the problem, because the checksum was never recalculated for the full SKB length. Signed-off-by:
Douglas Caetano dos Santos <douglascs@taghos.com.br> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 20c64d5c ] A malicious TCP receiver, sending SACK, can force the sender to split skbs in write queue and increase its memory usage. Then, when socket is closed and its write queue purged, we might overflow sk_forward_alloc (It becomes negative) sk_mem_reclaim() does nothing in this case, and more than 2GB are leaked from TCP perspective (tcp_memory_allocated is not changed) Then warnings trigger from inet_sock_destruct() and sk_stream_kill_queues() seeing a not zero sk_forward_alloc All TCP stack can be stuck because TCP is under memory pressure. A simple fix is to preemptively reclaim from sk_mem_uncharge(). This makes sure a socket wont have more than 2 MB forward allocated, after burst and idle period. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit ffb4d6c8 ] If a TCP socket gets a large write queue, an overflow can happen in a test in __tcp_retransmit_skb() preventing all retransmits. The flow then stalls and resets after timeouts. Tested: sysctl -w net.core.wmem_max=1000000000 netperf -H dest -- -s 1000000000 Signed-off-by:
-
- 10 Nov, 2016 33 commits
-
-
Greg Kroah-Hartman authored
-
Oliver Neukum authored
commit cf0ea4da upstream. Like many similar devices it needs a quirk to work. Issuing the request gets the device into an irrecoverable state. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Boris Brezillon authored
commit 40b6e61a upstream. Commit e96a8a3b ("UBI: Fastmap: Do not add vol if it already exists") introduced a bug by changing the possible error codes returned by add_vol(): - this function no longer returns NULL in case of allocation failure but return ERR_PTR(-ENOMEM) - when a duplicate entry in the volume RB tree is found it returns ERR_PTR(-EEXIST) instead of ERR_PTR(-EINVAL) Fix the tests done on add_vol() return val to match this new behavior. Fixes: e96a8a3b ("UBI: Fastmap: Do not add vol if it already exists") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by:
Sheng Yong <shengyong1@huawei.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Owen Hofmann authored
commit d9092f52 upstream. Commit 41061cdb ("KVM: emulate: do not initialize memopp") removes a check for non-NULL under incorrect assumptions. An undefined instruction with a ModR/M byte with Mod=0 and R/M-5 (e.g. 0xc7 0x15) will attempt to dereference a null pointer here. Fixes: 41061cdb Message-Id: <1477592752-126650-2-git-send-email-osh@google.com> Signed-off-by:
Owen Hofmann <osh@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jiri Slaby authored
commit 42acfc66 upstream. In csi_J(3), the third parameter of scr_memsetw (vc_screenbuf_size) is divided by 2 inappropriatelly. But scr_memsetw expects size, not count, because it divides the size by 2 on its own before doing actual memset-by-words. So remove the bogus division. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Petr Písař <ppisar@redhat.com> Fixes: f8df13e0 (tty: Clean console safely) Signed-off-by:
-
Christophe JAILLET authored
commit 51fbc7c0 upstream. In commit 2abd9d5f ("usb: dwc3: ep0: Add chained TRB support"), the size of the memory allocated with 'dma_alloc_coherent()' has been modified but the corresponding calls to 'dma_free_coherent()' have not been updated accordingly. This has been spotted with coccinelle, using the following script: //////////////////// @r@ expression x0, x1, y0, y1, z0, z1, t0, t1, ret; @@ * ret = dma_alloc_coherent(x0, y0, z0, t0); ... * dma_free_coherent(x1, y1, ret, t1); @script:python@ y0 << r.y0; y1 << r.y1; @@ if y1.find(y0) == -1: print "WARNING: sizes look different: '%s' vs '%s'" % (y0, y1) //////////////////// Fixes: 2abd9d5f ("usb: dwc3: ep0: Add chained TRB support") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
David Hsu authored
commit 0733424c upstream. Exported pwm channels aren't removed before the pwmchip and are leaked. This results in invalid sysfs files. This fix removes all exported pwm channels before chip removal. Signed-off-by:
David Hsu <davidhsu@google.com> Fixes: 76abbdde ("pwm: Add sysfs interface") Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Boris Brezillon authored
commit ecbfa8ea upstream. scan_pool() does not mark the PEB for scrubing when bitflips are detected in the EC header of a free PEB (VID header region left to 0xff). Make sure we scrub the PEB in this case. Signed-off-by:
-
Linus Torvalds authored
commit 124a3d88 upstream. Newer versions of gcc warn about the use of __builtin_return_address() with a non-zero argument when "-Wall" is specified: kernel/trace/trace_irqsoff.c: In function ‘stop_critical_timings’: kernel/trace/trace_irqsoff.c:433:86: warning: calling ‘__builtin_return_address’ with a nonzero argument is unsafe [-Wframe-address] stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1); [ .. repeats a few times for other similar cases .. ] It is true that a non-zero argument is somewhat dangerous, and we do not actually have very many uses of that in the kernel - but the ftrace code does use it, and as Stephen Rostedt says: "We are well aware of the danger of using __builtin_return_address() of > 0. In fact that's part of the reason for having the "thunk" code in x86 (See arch/x86/entry/thunk_{64,32}.S). [..] it adds extra frames when tracking irqs off sections, to prevent __builtin_return_address() from accessing bad areas. In fact the thunk_32.S states: 'Trampoline to trace irqs off. (otherwise CALLER_ADDR1 might crash)'." For now, __builtin_return_address() with a non-zero argument is the best we can do, and the warning is not helpful and can end up making people miss other warnings for real problems. So disable the frame-address warning on compilers that need it. Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
commit e3ebd894 upstream. The smc91x driver defines a macro that compares its argument to itself, apparently to get a true result while using its argument to avoid a warning about unused local variables. Unfortunately, this triggers a warning with gcc-6, as the comparison is obviously useless: drivers/net/ethernet/smsc/smc91x.c: In function 'smc_hardware_send_pkt': drivers/net/ethernet/smsc/smc91x.c:563:14: error: self-comparison always evaluates to true [-Werror=tautological-compare] if (!smc_special_trylock(&lp->lock, flags)) { This replaces the macro with another one that behaves similarly, with a cast to (void) to ensure the argument is used, and using a literal 'true' as its value. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
commit cfe02a8a upstream. When all subsystems are disabled, gcc notices that cgroup_subsys_enabled_key is a zero-length array and that any access to it must be out of bounds: In file included from ../include/linux/cgroup.h:19:0, from ../kernel/cgroup.c:31: ../kernel/cgroup.c: In function 'cgroup_add_cftypes': ../kernel/cgroup.c:261:53: error: array subscript is above array bounds [-Werror=array-bounds] return static_key_enabled(cgroup_subsys_enabled_key[ssid]); ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~ ../include/linux/jump_label.h:271:40: note: in definition of macro 'static_key_enabled' static_key_count((struct static_key *)x) > 0; \ ^ We should never call the function in this particular case, so this is not a bug. In order to silence the warning, this adds an explicit check for the CGROUP_SUBSYS_COUNT==0 case. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 55c4b906 upstream. gcc-6 warns about a pointless loop in exynos_drm_subdrv_open: drivers/gpu/drm/exynos/exynos_drm_core.c: In function 'exynos_drm_subdrv_open': drivers/gpu/drm/exynos/exynos_drm_core.c:104:199: error: self-comparison always evaluates to false [-Werror=tautological-compare] list_for_each_entry_reverse(subdrv, &subdrv->list, list) { Here, the list_for_each_entry_reverse immediately terminates because the subdrv pointer is compared to itself as the loop end condition. If we were to take the current subdrv pointer as the start of the list (as we would do if list_for_each_entry_reverse() was not a macro), we would iterate backwards over the &exynos_drm_subdrv_list anchor, which would be even worse. Instead, we need to use list_for_each_entry_continue_reverse() to go back over each subdrv that was successfully opened until the first entry. Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Stephen Rothwell authored
commit badbda53 upstream. pageblock_order can be (at least) an unsigned int or an unsigned long depending on the kernel config and architecture, so use max_t(unsigned long, ...) when comparing it. fixes these warnings: In file included from include/asm-generic/bug.h:13:0, from arch/powerpc/include/asm/bug.h:127, from include/linux/bug.h:4, from include/linux/mmdebug.h:4, from include/linux/mm.h:8, from include/linux/memblock.h:18, from mm/cma.c:28: mm/cma.c: In function 'cma_init_reserved_mem': include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); ^ mm/cma.c:186:27: note: in expansion of macro 'max' alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order); ^ mm/cma.c: In function 'cma_declare_contiguous': include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); ^ include/linux/kernel.h:747:9: note: in definition of macro 'max' typeof(y) _max2 = (y); ^ mm/cma.c:270:29: note: in expansion of macro 'max' (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order)); ^ include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); ^ include/linux/kernel.h:747:21: note: in definition of macro 'max' typeof(y) _max2 = (y); ^ mm/cma.c:270:29: note: in expansion of macro 'max' (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order)); ^ [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20160526150748.5be38a4f@canb.auug.org.auSigned-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
commit dd665be0 upstream. gcc-6.0 warns about comparisons between two identical expressions, which is what we get in the floppy driver when writing to the FD_DOR register: drivers/block/floppy.c: In function 'set_dor': drivers/block/floppy.c:810:44: error: self-comparison always evaluates to true [-Werror=tautological-compare] fd_outb(newdor, FD_DOR); It would be nice to use a static inline function instead of the macro, to avoid the warning, but we cannot do that because the FD_DOR definition is incomplete at this point. Adding a cast to (u32) is a harmless way to shut up the warning, just not very nice. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Khem Raj authored
commit 1e407ee3 upstream. gcc-6 correctly warns about a out of bounds access arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds] offsetof(struct thread_fp_state, fpr[32][0])); ^ check the end of array instead of beginning of next element to fix this Signed-off-by:
Khem Raj <raj.khem@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Segher Boessenkool <segher@kernel.crashing.org> Tested-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Juergen Gross authored
commit 1cf38741 upstream. xen_cleanhighmap() is operating on level2_kernel_pgt only. The upper bound of the loop setting non-kernel-image entries to zero should not exceed the size of level2_kernel_pgt. Reported-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Jiri Olsa authored
commit 67befc65 upstream. Ingo reported following build failure: $ make clean install ... CC plugin_kmem.o fixdep: error opening depfile: ./.plugin_hrtimer.o.d: No such file or directory /home/mingo/tip/tools/build/Makefile.build:77: recipe for target 'plugin_hrtimer.o' failed make[3]: *** [plugin_hrtimer.o] Error 2 Makefile:189: recipe for target 'plugin_hrtimer-in.o' failed make[2]: *** [plugin_hrtimer-in.o] Error 2 Makefile.perf:414: recipe for target 'libtraceevent_plugins' failed make[1]: *** [libtraceevent_plugins] Error 2 make[1]: *** Waiting for unfinished jobs.... Currently we have the install-traceevent-plugins target being dependent on $(LIBTRACEEVENT), which will actualy not build any plugin. So the install-traceevent-plugins target itself will try to build plugins, but.. Plugins built is also triggered by perf build itself via libtraceevent_plugins target. This might cause a race having one make thread removing temp files from another and result in above error. Fixing this by having proper plugins build dependency before installing plugins. Reported-and-Tested-by:
: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1448546044-28973-3-git-send-email-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by:
-
Ville Syrjälä authored
commit 4da5caa6 upstream. Only certain types of pdts have the DDC bus registered, so check for that before we attempt the EDID read. Othwewise we risk playing around with an i2c adapter that doesn't actually exist. Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by:
Carlos Santa <carlos.santa@intel.com> Tested-by:
Kirill A. Shutemov <kirill@shutemov.name> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-5-git-send-email-ville.syrjala@linux.intel.comSigned-off-by:
-
Lucas Stach authored
commit 537b4b46 upstream. The read is taking a considerable amount of time (about 50us on this machine). The register does not ever hold anything other than the ring ID that is updated in this exact function, so there is no need for the read modify write cycle. This chops off a big chunk of the time spent in hardirq disabled context, as this function is called multiple times in the interrupt handler. With this change applied radeon won't show up in the list of the worst IRQ latency offenders anymore, where it was a regular before. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Lucas Stach <dev@lynxeye.de> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 7dc86ef5 upstream. Consolidate existing quirks. Fixes stability issues on some kickers. Signed-off-by:
-
Tom St Denis authored
commit fb9a5b0c upstream. Limit clocks on a specific HD86xx part to avoid crashes (while awaiting an appropriate PP fix). Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Michel Dänzer authored
commit 9dc79965 upstream. This reverts commit 1a738347. It caused at least some Kaveri laptops to incorrectly report DisplayPort connectors as connected. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97857Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Jaehoon Chung authored
commit 45c7a490 upstream. platform_get_resource can be returned the NULL pointer. Then regs->start should be referred to NULL Pointer. devm_ioremap_resource() checks whether res is NULL or not. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Ching Huang authored
commit 2bf7dc84 upstream. The arcmsr driver failed to pass SYNCHRONIZE CACHE to controller firmware. Depending on how drive caches are handled internally by controller firmware this could potentially lead to data integrity problems. Ensure that cache flushes are passed to the controller. [mkp: applied by hand and removed unused vars] Signed-off-by:
Ching Huang <ching2048@areca.com.tw> Reported-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Ewan D. Milne authored
commit 4d2b496f upstream. map_storep was not being vfree()'d in the module_exit call. Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
-
Kashyap Desai authored
commit 1e793f6f upstream. Commit 02b01e01 ("megaraid_sas: return sync cache call with success") modified the driver to successfully complete SYNCHRONIZE_CACHE commands without passing them to the controller. Disk drive caches are only explicitly managed by controller firmware when operating in RAID mode. So this commit effectively disabled writeback cache flushing for any drives used in JBOD mode, leading to data integrity failures. [mkp: clarified patch description] Fixes: 02b01e01Signed-off-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Johannes Berg authored
commit ea720935 upstream. In mac80211, multicast A-MSDUs are accepted in many cases that they shouldn't be accepted in: * drop A-MSDUs with a multicast A1 (RA), as required by the spec in 9.11 (802.11-2012 version) * drop A-MSDUs with a 4-addr header, since the fourth address can't actually be useful for them; unless 4-address frame format is actually requested, even though the fourth address is still not useful in this case, but ignored Accepting the first case, in particular, is very problematic since it allows anyone else with possession of a GTK to send unicast frames encapsulated in a multicast A-MSDU, even when the AP has client isolation enabled. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Stefan Richter authored
commit e9300a4b upstream. RFC 2734 defines the datagram_size field in fragment encapsulation headers thus: datagram_size: The encoded size of the entire IP datagram. The value of datagram_size [...] SHALL be one less than the value of Total Length in the datagram's IP header (see STD 5, RFC 791). Accordingly, the eth1394 driver of Linux 2.6.36 and older set and got this field with a -/+1 offset: ether1394_tx() /* transmit */ ether1394_encapsulate_prep() hdr->ff.dg_size = dg_size - 1; ether1394_data_handler() /* receive */ if (hdr->common.lf == ETH1394_HDR_LF_FF) dg_size = hdr->ff.dg_size + 1; else dg_size = hdr->sf.dg_size + 1; Likewise, I observe OS X 10.4 and Windows XP Pro SP3 to transmit 1500 byte sized datagrams in fragments with datagram_size=1499 if link fragmentation is required. Only firewire-net sets and gets datagram_size without this offset. The result is lacking interoperability of firewire-net with OS X, Windows XP, and presumably Linux' eth1394. (I did not test with the latter.) For example, FTP data transfers to a Linux firewire-net box with max_rec smaller than the 1500 bytes MTU - from OS X fail entirely, - from Win XP start out with a bunch of fragmented datagrams which time out, then continue with unfragmented datagrams because Win XP temporarily reduces the MTU to 576 bytes. So let's fix firewire-net's datagram_size accessors. Note that firewire-net thereby loses interoperability with unpatched firewire-net, but only if link fragmentation is employed. (This happens with large broadcast datagrams, and with large datagrams on several FireWire CardBus cards with smaller max_rec than equivalent PCI cards, and it can be worked around by setting a small enough MTU.) Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Stefan Richter authored
commit 667121ac upstream. The IP-over-1394 driver firewire-net lacked input validation when handling incoming fragmented datagrams. A maliciously formed fragment with a respectively large datagram_offset would cause a memcpy past the datagram buffer. So, drop any packets carrying a fragment with offset + length larger than datagram_size. In addition, ensure that - GASP header, unfragmented encapsulation header, or fragment encapsulation header actually exists before we access it, - the encapsulated datagram or fragment is of nonzero size. Reported-by:
Eyal Itkin <eyal.itkin@gmail.com> Reviewed-by:
-
Patrick Scheuring authored
commit da25311c upstream. The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop. Therefore it also needs a keyboard reset to detect the Elantech touchpad. Otherwise the touchpad appears to be dead. With this patch the touchpad is detected: $ dmesg | grep -E "(i8042|Elantech|elantech)" [ 2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.680372] i8042: Attempting to reset device connected to KBD port [ 2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e) [ 3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f. [ 3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74 [ 3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 Signed-off-by:
Patrick Scheuring <patrick.scheuring.dev@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Heinz Mauelshagen authored
commit dcb2ff56 upstream. If a default leg has failed, any read will cause a new operational default leg to be selected and the read is resubmitted. But until now the read will return failure even though it was successful due to resubmission. The reason for this is bio->bi_error was not being cleared before resubmitting the bio. Fix by clearing bio->bi_error before resubmission. Fixes: 4246a0b6 ("block: add a bi_error field to struct bio") Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Matt Redfearn authored
commit 34563769 upstream. Commit c6017e79 ("virtio: console: add locks around buffer removal in port unplug path") added locking around the freeing of buffers in the vq. However, when free_buf() is called with can_sleep = true and rproc is enabled, it calls dma_free_coherent() directly, requiring interrupts to be enabled. Currently a WARNING is triggered due to the spin locking around free_buf, with a call stack like this: WARNING: CPU: 3 PID: 121 at ./include/linux/dma-mapping.h:433 free_buf+0x1a8/0x288 Call Trace: [<8040c538>] show_stack+0x74/0xc0 [<80757240>] dump_stack+0xd0/0x110 [<80430d98>] __warn+0xfc/0x130 [<80430ee0>] warn_slowpath_null+0x2c/0x3c [<807e7c6c>] free_buf+0x1a8/0x288 [<807ea590>] remove_port_data+0x50/0xac [<807ea6a0>] unplug_port+0xb4/0x1bc [<807ea858>] virtcons_remove+0xb0/0xfc [<807b6734>] virtio_dev_remove+0x58/0xc0 [<807f918c>] __device_release_driver+0xac/0x134 [<807f924c>] device_release_driver+0x38/0x50 [<807f7edc>] bus_remove_device+0xfc/0x130 [<807f4b74>] device_del+0x17c/0x21c [<807f4c38>] device_unregister+0x24/0x38 [<807b6b50>] unregister_virtio_device+0x28/0x44 Fix this by restructuring the loops to allow the locks to only be taken where it is necessary to protect the vqs, and release it while the buffer is being freed. Fixes: c6017e79 ("virtio: console: add locks around buffer removal in port unplug path") Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Ladi Prosek authored
commit 0ea1e4a6 upstream. According to the spec, if the VIRTIO_RING_F_EVENT_IDX feature bit is negotiated the driver MUST set flags to 0. Not dirtying the available ring in virtqueue_disable_cb also has a minor positive performance impact, improving L1 dcache load missed by ~0.5% in vring_bench. Writes to the used event field (vring_used_event) are still unconditional. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Ladi Prosek <lprosek@redhat.com> Signed-off-by:
-
