- 11 Oct, 2016 40 commits
-
-
Hidehiro Kawai authored
Daniel Walker reported problems which happens when crash_kexec_post_notifiers kernel option is enabled (https://lkml.org/lkml/2015/6/24/44). In that case, smp_send_stop() is called before entering kdump routines which assume other CPUs are still online. As the result, for x86, kdump routines fail to save other CPUs' registers and disable virtualization extensions. To fix this problem, call a new kdump friendly function, crash_smp_send_stop(), instead of the smp_send_stop() when crash_kexec_post_notifiers is enabled. crash_smp_send_stop() is a weak function, and it just call smp_send_stop(). Architecture codes should override it so that kdump can work appropriately. This patch only provides x86-specific version. For Xen's PV kernel, just keep the current behavior. NOTES: - Right solution would be to place crash_smp_send_stop() before __crash_kexec() invocation in all cases and remove smp_send_stop(), but we can't do that until all architectures implement own crash_smp_send_stop() - crash_smp_send_stop()-like work is still needed by machine_crash_shutdown() because crash_kexec() can be called without entering panic() Fixes: f06e5153 (kernel/panic.c: add "crash_kexec_post_notifiers" option) Link: http://lkml.kernel.org/r/20160810080948.11028.15344.stgit@sysi4-13.yrl.intra.hitachi.co.jpSigned-off-by:
Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Reported-by:
Daniel Walker <dwalker@fifo99.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Xunlei Pang <xpang@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: "Steven J. Hill" <steven.hill@cavium.com> Cc: Corey Minyard <cminyard@mvista.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mauricio Faria de Oliveira authored
Use the DMA_ATTR_NO_WARN attribute for the dma_map_sg() call of the nvme driver that returns BLK_MQ_RQ_QUEUE_BUSY (not for BLK_MQ_RQ_QUEUE_ERROR). Link: http://lkml.kernel.org/r/1470092390-25451-4-git-send-email-mauricfo@linux.vnet.ibm.comSigned-off-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Reviewed-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Jens Axboe <axboe@fb.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Mauricio Faria de Oliveira authored
Add support for the DMA_ATTR_NO_WARN attribute on powerpc iommu code. Link: http://lkml.kernel.org/r/1470092390-25451-3-git-send-email-mauricfo@linux.vnet.ibm.comSigned-off-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Jens Axboe <axboe@fb.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Mauricio Faria de Oliveira authored
Introduce the DMA_ATTR_NO_WARN attribute, and document it. Link: http://lkml.kernel.org/r/1470092390-25451-2-git-send-email-mauricfo@linux.vnet.ibm.comSigned-off-by:
-
Jason Cooper authored
All call sites for randomize_range have been updated to use the much simpler and more robust randomize_addr(). Remove the now unnecessary code. Link: http://lkml.kernel.org/r/20160803233913.32511-8-jason@lakedaemon.netSigned-off-by:
Jason Cooper <jason@lakedaemon.net> Acked-by:
Kees Cook <keescook@chromium.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Jason Cooper authored
Currently, all callers to randomize_range() set the length to 0 and calculate end by adding a constant to the start address. We can simplify the API to remove a bunch of needless checks and variables. Use the new randomize_addr(start, range) call to set the requested address. Link: http://lkml.kernel.org/r/20160803233913.32511-7-jason@lakedaemon.netSigned-off-by:
-
Jason Cooper authored
Currently, all callers to randomize_range() set the length to 0 and calculate end by adding a constant to the start address. We can simplify the API to remove a bunch of needless checks and variables. Use the new randomize_addr(start, range) call to set the requested address. Link: http://lkml.kernel.org/r/20160803233913.32511-6-jason@lakedaemon.netSigned-off-by:
-
Jason Cooper authored
Currently, all callers to randomize_range() set the length to 0 and calculate end by adding a constant to the start address. We can simplify the API to remove a bunch of needless checks and variables. Use the new randomize_addr(start, range) call to set the requested address. Link: http://lkml.kernel.org/r/20160803233913.32511-5-jason@lakedaemon.netSigned-off-by:
Will Deacon <will.deacon@arm.com> Acked-by:
-
Jason Cooper authored
Currently, all callers to randomize_range() set the length to 0 and calculate end by adding a constant to the start address. We can simplify the API to remove a bunch of needless checks and variables. Use the new randomize_addr(start, range) call to set the requested address. Link: http://lkml.kernel.org/r/20160803233913.32511-4-jason@lakedaemon.netSigned-off-by:
-
Jason Cooper authored
Currently, all callers to randomize_range() set the length to 0 and calculate end by adding a constant to the start address. We can simplify the API to remove a bunch of needless checks and variables. Use the new randomize_addr(start, range) call to set the requested address. Link: http://lkml.kernel.org/r/20160803233913.32511-3-jason@lakedaemon.netSigned-off-by:
-
Jason Cooper authored
To date, all callers of randomize_range() have set the length to 0, and check for a zero return value. For the current callers, the only way to get zero returned is if end <= start. Since they are all adding a constant to the start address, this is unnecessary. We can remove a bunch of needless checks by simplifying the API to do just what everyone wants, return an address between [start, start + range). While we're here, s/get_random_int/get_random_long/. No current call site is adversely affected by get_random_int(), since all current range requests are < UINT_MAX. However, we should match caller expectations to avoid coming up short (ha!) in the future. All current callers to randomize_range() chose to use the start address if randomize_range() failed. Therefore, we simplify things by just returning the start address on error. randomize_range() will be removed once all callers have been converted over to randomize_addr(). Link: http://lkml.kernel.org/r/20160803233913.32511-2-jason@lakedaemon.netSigned-off-by:
-
Alexandre Bounine authored
Fix coccinelle warning about duplicating existing memdup_user function. Link: http://lkml.kernel.org/r/20160811151737.20140-1-alexandre.bounine@idt.com Link: https://lkml.org/lkml/2016/8/11/29Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by:
-
Ales Novak authored
On __ptrace_detach(), called from do_exit()->exit_notify()-> forget_original_parent()->exit_ptrace(), the TIF_SYSCALL_TRACE in thread->flags of the tracee is not cleared up. This results in the tracehook_report_syscall_* being called (though there's no longer a tracer listening to that) upon its further syscalls. Example scenario - attach "strace" to a running process and kill it (the strace) with SIGKILL. You'll see that the syscall trace hooks are still being called. The clearing of this flag should be moved from ptrace_detach() to __ptrace_detach(). Link: http://lkml.kernel.org/r/1472759493-20554-1-git-send-email-alnovak@suse.czSigned-off-by:
Ales Novak <alnovak@suse.cz> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Michael Kerrisk (man-pages) authored
This is a patch that provides behavior that is more consistent, and probably less surprising to users. I consider the change optional, and welcome opinions about whether it should be applied. By default, pipes are created with a capacity of 64 kiB. However, /proc/sys/fs/pipe-max-size may be set smaller than this value. In this scenario, an unprivileged user could thus create a pipe whose initial capacity exceeds the limit. Therefore, it seems logical to cap the initial pipe capacity according to the value of pipe-max-size. The test program shown earlier in this patch series can be used to demonstrate the effect of the change brought about with this patch: # cat /proc/sys/fs/pipe-max-size 1048576 # sudo -u mtk ./test_F_SETPIPE_SZ 1 Initial pipe capacity: 65536 # echo 10000 > /proc/sys/fs/pipe-max-size # cat /proc/sys/fs/pipe-max-size 16384 # sudo -u mtk ./test_F_SETPIPE_SZ 1 Initial pipe capacity: 16384 # ./test_F_SETPIPE_SZ 1 Initial pipe capacity: 65536 The last two executions of 'test_F_SETPIPE_SZ' show that pipe-max-size caps the initial allocation for a new pipe for unprivileged users, but not for privileged users. Link: http://lkml.kernel.org/r/31dc7064-2a17-9c5b-1df1-4e3012ee992c@gmail.comSigned-off-by:Michael Kerrisk <mtk.manpages@gmail.com> Reviewed-by:
Vegard Nossum <vegard.nossum@oracle.com> Cc: Willy Tarreau <w@1wt.eu> Cc: <socketpair@gmail.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Jens Axboe <axboe@fb.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Michael Kerrisk (man-pages) authored
This is an optional patch, to provide a small performance improvement. Alter account_pipe_buffers() so that it returns the new value in user->pipe_bufs. This means that we can refactor too_many_pipe_buffers_soft() and too_many_pipe_buffers_hard() to avoid the costs of repeated use of atomic_long_read() to get the value user->pipe_bufs. Link: http://lkml.kernel.org/r/93e5f193-1e5e-3e1f-3a20-eae79b7e1310@gmail.comSigned-off-by:
-
Michael Kerrisk (man-pages) authored
The limit checking in alloc_pipe_info() (used by pipe(2) and when opening a FIFO) has the following problems: (1) When checking capacity required for the new pipe, the checks against the limit in /proc/sys/fs/pipe-user-pages-{soft,hard} are made against existing consumption, and exclude the memory required for the new pipe capacity. As a consequence: (1) the memory allocation throttling provided by the soft limit does not kick in quite as early as it should, and (2) the user can overrun the hard limit. (2) As currently implemented, accounting and checking against the limits is done as follows: (a) Test whether the user has exceeded the limit. (b) Make new pipe buffer allocation. (c) Account new allocation against the limits. This is racey. Multiple processes may pass point (a) simultaneously, and then allocate pipe buffers that are accounted for only in step (c). The race means that the user's pipe buffer allocation could be pushed over the limit (by an arbitrary amount, depending on how unlucky we were in the race). [Thanks to Vegard Nossum for spotting this point, which I had missed.] This patch addresses the above problems as follows: * Alter the checks against limits to include the memory required for the new pipe. * Re-order the accounting step so that it precedes the buffer allocation. If the accounting step determines that a limit has been reached, revert the accounting and cause the operation to fail. Link: http://lkml.kernel.org/r/8ff3e9f9-23f6-510c-644f-8e70cd1c0bd9@gmail.comSigned-off-by: -
Michael Kerrisk (man-pages) authored
Replace an 'if' block that covers most of the code in this function with a 'goto'. This makes the code a little simpler to read, and also simplifies the next patch (fix limit checking in alloc_pipe_info()) Link: http://lkml.kernel.org/r/aef030c1-0257-98a9-4988-186efa48530c@gmail.comSigned-off-by:
-
Michael Kerrisk (man-pages) authored
The limit checking in pipe_set_size() (used by fcntl(F_SETPIPE_SZ)) has the following problems: (1) When increasing the pipe capacity, the checks against the limits in /proc/sys/fs/pipe-user-pages-{soft,hard} are made against existing consumption, and exclude the memory required for the increased pipe capacity. The new increase in pipe capacity can then push the total memory used by the user for pipes (possibly far) over a limit. This can also trigger the problem described next. (2) The limit checks are performed even when the new pipe capacity is less than the existing pipe capacity. This can lead to problems if a user sets a large pipe capacity, and then the limits are lowered, with the result that the user will no longer be able to decrease the pipe capacity. (3) As currently implemented, accounting and checking against the limits is done as follows: (a) Test whether the user has exceeded the limit. (b) Make new pipe buffer allocation. (c) Account new allocation against the limits. This is racey. Multiple processes may pass point (a) simultaneously, and then allocate pipe buffers that are accounted for only in step (c). The race means that the user's pipe buffer allocation could be pushed over the limit (by an arbitrary amount, depending on how unlucky we were in the race). [Thanks to Vegard Nossum for spotting this point, which I had missed.] This patch addresses the above problems as follows: * Perform checks against the limits only when increasing a pipe's capacity; an unprivileged user can always decrease a pipe's capacity. * Alter the checks against limits to include the memory required for the new pipe capacity. * Re-order the accounting step so that it precedes the buffer allocation. If the accounting step determines that a limit has been reached, revert the accounting and cause the operation to fail. The program below can be used to demonstrate problems 1 and 2, and the effect of the fix. The program takes one or more command-line arguments. The first argument specifies the number of pipes that the program should create. The remaining arguments are, alternately, pipe capacities that should be set using fcntl(F_SETPIPE_SZ), and sleep intervals (in seconds) between the fcntl() operations. (The sleep intervals allow the possibility to change the limits between fcntl() operations.) Problem 1 ========= Using the test program on an unpatched kernel, we first set some limits: # echo 0 > /proc/sys/fs/pipe-user-pages-soft # echo 1000000000 > /proc/sys/fs/pipe-max-size # echo 10000 > /proc/sys/fs/pipe-user-pages-hard # 40.96 MB Then show that we can set a pipe with capacity (100MB) that is over the hard limit # sudo -u mtk ./test_F_SETPIPE_SZ 1 100000000 Initial pipe capacity: 65536 Loop 1: set pipe capacity to 100000000 bytes F_SETPIPE_SZ returned 134217728 Now set the capacity to 100MB twice. The second call fails (which is probably surprising to most users, since it seems like a no-op): # sudo -u mtk ./test_F_SETPIPE_SZ 1 100000000 0 100000000 Initial pipe capacity: 65536 Loop 1: set pipe capacity to 100000000 bytes F_SETPIPE_SZ returned 134217728 Loop 2: set pipe capacity to 100000000 bytes Loop 2, pipe 0: F_SETPIPE_SZ failed: fcntl: Operation not permitted With a patched kernel, setting a capacity over the limit fails at the first attempt: # echo 0 > /proc/sys/fs/pipe-user-pages-soft # echo 1000000000 > /proc/sys/fs/pipe-max-size # echo 10000 > /proc/sys/fs/pipe-user-pages-hard # sudo -u mtk ./test_F_SETPIPE_SZ 1 100000000 Initial pipe capacity: 65536 Loop 1: set pipe capacity to 100000000 bytes Loop 1, pipe 0: F_SETPIPE_SZ failed: fcntl: Operation not permitted There is a small chance that the change to fix this problem could break user-space, since there are cases where fcntl(F_SETPIPE_SZ) calls that previously succeeded might fail. However, the chances are small, since (a) the pipe-user-pages-{soft,hard} limits are new (in 4.5), and the default soft/hard limits are high/unlimited. Therefore, it seems warranted to make these limits operate more precisely (and behave more like what users probably expect). Problem 2 ========= Running the test program on an unpatched kernel, we first set some limits: # getconf PAGESIZE 4096 # echo 0 > /proc/sys/fs/pipe-user-pages-soft # echo 1000000000 > /proc/sys/fs/pipe-max-size # echo 10000 > /proc/sys/fs/pipe-user-pages-hard # 40.96 MB Now perform two fcntl(F_SETPIPE_SZ) operations on a single pipe, first setting a pipe capacity (10MB), sleeping for a few seconds, during which time the hard limit is lowered, and then set pipe capacity to a smaller amount (5MB): # sudo -u mtk ./test_F_SETPIPE_SZ 1 10000000 15 5000000 & [1] 748 # Initial pipe capacity: 65536 Loop 1: set pipe capacity to 10000000 bytes F_SETPIPE_SZ returned 16777216 Sleeping 15 seconds # echo 1000 > /proc/sys/fs/pipe-user-pages-hard # 4.096 MB # Loop 2: set pipe capacity to 5000000 bytes Loop 2, pipe 0: F_SETPIPE_SZ failed: fcntl: Operation not permitted In this case, the user should be able to lower the limit. With a kernel that has the patch below, the second fcntl() succeeds: # echo 0 > /proc/sys/fs/pipe-user-pages-soft # echo 1000000000 > /proc/sys/fs/pipe-max-size # echo 10000 > /proc/sys/fs/pipe-user-pages-hard # sudo -u mtk ./test_F_SETPIPE_SZ 1 10000000 15 5000000 & [1] 3215 # Initial pipe capacity: 65536 # Loop 1: set pipe capacity to 10000000 bytes F_SETPIPE_SZ returned 16777216 Sleeping 15 seconds # echo 1000 > /proc/sys/fs/pipe-user-pages-hard # Loop 2: set pipe capacity to 5000000 bytes F_SETPIPE_SZ returned 8388608 8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x--- /* test_F_SETPIPE_SZ.c (C) 2016, Michael Kerrisk; licensed under GNU GPL version 2 or later Test operation of fcntl(F_SETPIPE_SZ) for setting pipe capacity and interactions with limits defined by /proc/sys/fs/pipe-* files. */ #define _GNU_SOURCE #include <stdio.h> #include <stdlib.h> #include <fcntl.h> #include <unistd.h> int main(int argc, char *argv[]) { int (*pfd)[2]; int npipes; int pcap, rcap; int j, p, s, stime, loop; if (argc < 2) { fprintf(stderr, "Usage: %s num-pipes " "[pipe-capacity sleep-time]...\n", argv[0]); exit(EXIT_FAILURE); } npipes = atoi(argv[1]); pfd = calloc(npipes, sizeof (int [2])); if (pfd == NULL) { perror("calloc"); exit(EXIT_FAILURE); } for (j = 0; j < npipes; j++) { if (pipe(pfd[j]) == -1) { fprintf(stderr, "Loop %d: pipe() failed: ", j); perror("pipe"); exit(EXIT_FAILURE); } } printf("Initial pipe capacity: %d\n", fcntl(pfd[0][0], F_GETPIPE_SZ)); for (j = 2; j < argc; j += 2 ) { loop = j / 2; pcap = atoi(argv[j]); printf(" Loop %d: set pipe capacity to %d bytes\n", loop, pcap); for (p = 0; p < npipes; p++) { s = fcntl(pfd[p][0], F_SETPIPE_SZ, pcap); if (s == -1) { fprintf(stderr, " Loop %d, pipe %d: F_SETPIPE_SZ " "failed: ", loop, p); perror("fcntl"); exit(EXIT_FAILURE); } if (p == 0) { printf(" F_SETPIPE_SZ returned %d\n", s); rcap = s; } else { if (s != rcap) { fprintf(stderr, " Loop %d, pipe %d: F_SETPIPE_SZ " "unexpected return: %d\n", loop, p, s); exit(EXIT_FAILURE); } } stime = (j + 1 < argc) ? atoi(argv[j + 1]) : 0; if (stime > 0) { printf(" Sleeping %d seconds\n", stime); sleep(stime); } } } exit(EXIT_SUCCESS); } 8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x--- Patch history: v2 * Switch order of test in 'if' statement to avoid function call (to capability()) in normal path. [This is a fix to a preexisting wart in the code. Thanks to Willy Tarreau] * Perform (size > pipe_max_size) check before calling account_pipe_buffers(). [Thanks to Vegard Nossum] Quoting Vegard: The potential problem happens if the user passes a very large number which will overflow pipe->user->pipe_bufs. On 32-bit, sizeof(int) == sizeof(long), so if they pass arg = INT_MAX then round_pipe_size() returns INT_MAX. Although it's true that the accounting is done in terms of pages and not bytes, so you'd need on the order of (1 << 13) = 8192 processes hitting the limit at the same time in order to make it overflow, which seems a bit unlikely. (See https://lkml.org/lkml/2016/8/12/215 for another discussion on the limit checking) Link: http://lkml.kernel.org/r/1e464945-536b-2420-798b-e77b9c7e8593@gmail.comSigned-off-by: -
Michael Kerrisk (man-pages) authored
This is a preparatory patch for following work. account_pipe_buffers() performs accounting in the 'user_struct'. There is no need to pass a pointer to a 'pipe_inode_info' struct (which is then dereferenced to obtain a pointer to the 'user' field). Instead, pass a pointer directly to the 'user_struct'. This change is needed in preparation for a subsequent patch that the fixes the limit checking in alloc_pipe_info() (and the resulting code is a little more logical). Link: http://lkml.kernel.org/r/7277bf8c-a6fc-4a7d-659c-f5b145c981ab@gmail.comSigned-off-by:
-
Michael Kerrisk (man-pages) authored
This is a preparatory patch for following work. Move the F_SETPIPE_SZ limit-checking logic from pipe_fcntl() into pipe_set_size(). This simplifies the code a little, and allows for reworking required in a later patch that fixes the limit checking in pipe_set_size() Link: http://lkml.kernel.org/r/3701b2c5-2c52-2c3e-226d-29b9deb29b50@gmail.comSigned-off-by:
-
Michael Kerrisk (man-pages) authored
Patch series "pipe: fix limit handling", v2. When changing a pipe's capacity with fcntl(F_SETPIPE_SZ), various limits defined by /proc/sys/fs/pipe-* files are checked to see if unprivileged users are exceeding limits on memory consumption. While documenting and testing the operation of these limits I noticed that, as currently implemented, these checks have a number of problems: (1) When increasing the pipe capacity, the checks against the limits in /proc/sys/fs/pipe-user-pages-{soft,hard} are made against existing consumption, and exclude the memory required for the increased pipe capacity. The new increase in pipe capacity can then push the total memory used by the user for pipes (possibly far) over a limit. This can also trigger the problem described next. (2) The limit checks are performed even when the new pipe capacity is less than the existing pipe capacity. This can lead to problems if a user sets a large pipe capacity, and then the limits are lowered, with the result that the user will no longer be able to decrease the pipe capacity. (3) As currently implemented, accounting and checking against the limits is done as follows: (a) Test whether the user has exceeded the limit. (b) Make new pipe buffer allocation. (c) Account new allocation against the limits. This is racey. Multiple processes may pass point (a) simultaneously, and then allocate pipe buffers that are accounted for only in step (c). The race means that the user's pipe buffer allocation could be pushed over the limit (by an arbitrary amount, depending on how unlucky we were in the race). [Thanks to Vegard Nossum for spotting this point, which I had missed.] This patch series addresses these three problems. This patch (of 8): This is a minor preparatory patch. After subsequent patches, round_pipe_size() will be called from pipe_set_size(), so place round_pipe_size() above pipe_set_size(). Link: http://lkml.kernel.org/r/91a91fdb-a959-ba7f-b551-b62477cc98a1@gmail.comSigned-off-by: -
Tomohiro Kusumi authored
cmd part of this struct is the same as an index of itself within _ioctls[]. In fact this cmd is unused, so we can drop this part. Link: http://lkml.kernel.org/r/20160831033414.9910.66697.stgit@pluto.themaw.netSigned-off-by:
Tomohiro Kusumi <kusumi.tomohiro@gmail.com> Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Tomohiro Kusumi authored
Having this in autofs_i.h gives illusion that uncommenting this enables pr_debug(), but it doesn't enable all the pr_debug() in autofs because inclusion order matters. XFS has the same DEBUG macro in its core header fs/xfs/xfs.h, however XFS seems to have a rule to include this prior to other XFS headers as well as kernel headers. This is not the case with autofs, and DEBUG could be enabled via Makefile, so autofs should just get rid of this comment to make the code less confusing. It's a comment, so there is literally no functional difference. Link: http://lkml.kernel.org/r/20160831033409.9910.77067.stgit@pluto.themaw.netSigned-off-by:
-
Ian Kent authored
Since linux/auto_dev-ioctl.h wasn't included in include/linux/Kbuild it wasn't moved to uapi/linux as part of the uapi series. Link: http://lkml.kernel.org/r/20160812024901.12352.10984.stgit@pluto.themaw.netSigned-off-by:
-
Tomohiro Kusumi authored
linux/limits.h should be included by uapi instead of linux/auto_fs.h so as not to cause compile error in userspace. # cat << EOF > ./test1.c > #include <stdio.h> > #include <linux/auto_fs.h> > int main(void) { > return 0; > } > EOF # gcc -Wall -g ./test1.c In file included from ./test1.c:2:0: /usr/include/linux/auto_fs.h:54:12: error: 'NAME_MAX' undeclared here (not in a function) char name[NAME_MAX+1]; ^ Link: http://lkml.kernel.org/r/20160812024856.12352.24092.stgit@pluto.themaw.netSigned-off-by:Ian Kent <ikent@redhat.com> Signed-off-by:
-
Tomohiro Kusumi authored
All other warnings use "cmd(0x%08x)" and this is the only one with "cmd(%d)". (below comes from my userspace debug program, but not automount daemon) [ 1139.905676] autofs4:pid:1640:check_dev_ioctl_version: ioctl control interface version mismatch: kernel(1.0), user(0.0), cmd(-1072131215) Link: http://lkml.kernel.org/r/20160812024851.12352.75458.stgit@pluto.themaw.netSigned-off-by:
-
Ian Kent authored
No functional changes, based on the following justification. 1. Make the code more consistent using the ioctl vector _ioctls[], rather than assigning NULL only for this ioctl command. 2. Remove goto done; for better maintainability in the long run. 3. The existing code is based on the fact that validate_dev_ioctl() sets ioctl version for any command, but AUTOFS_DEV_IOCTL_VERSION_CMD should explicitly set it regardless of the default behavior. Link: http://lkml.kernel.org/r/20160812024846.12352.9885.stgit@pluto.themaw.netSigned-off-by:
-
Ian Kent authored
The count of miscellaneous device ioctls in fs/autofs4/autofs_i.h is wrong. The number of ioctls is the difference between AUTOFS_DEV_IOCTL_VERSION_CMD and AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD (14) not the difference between AUTOFS_IOC_COUNT and 11 (21). [kusumi.tomohiro@gmail.com: fix typo that made the count macro negative] Link: http://lkml.kernel.org/r/20160831033420.9910.16809.stgit@pluto.themaw.net Link: http://lkml.kernel.org/r/20160812024841.12352.11975.stgit@pluto.themaw.netSigned-off-by:
-
Tomohiro Kusumi authored
This isn't a return value, so change the message to indicate the status is the result of may_umount(). (or locate pr_debug() after put_user() with the same message) Link: http://lkml.kernel.org/r/20160812024836.12352.74628.stgit@pluto.themaw.netSigned-off-by:
-
Tomohiro Kusumi authored
Sync with changes made by commit 730c9eec ("autofs4: improve parameter usage") which introduced an union for various ioctl commands instead of having statically named arg1,2. This commit simply replaces arg1,2 with the corresponding fields without changing semantics. Link: http://lkml.kernel.org/r/20160812024831.12352.24667.stgit@pluto.themaw.netSigned-off-by:
-
Tomohiro Kusumi authored
The explanation on how ioctl handles devid seems incorrect. Userspace who calls this ioctl has no input regarding devid, and ioctl implementation retrieves devid via superblock. Link: http://lkml.kernel.org/r/20160812024825.12352.13486.stgit@pluto.themaw.netSigned-off-by:
-
Tomohiro Kusumi authored
This macro was never used by neither kernel nor userspace, and also doesn't represent "devid length" in bytes. (unless it was added to mean something else). Link: http://lkml.kernel.org/r/20160812024820.12352.21210.stgit@pluto.themaw.netSigned-off-by:
-
Tomohiro Kusumi authored
Returning -ENOTTY here fails to free dynamically allocated param. Link: http://lkml.kernel.org/r/20160812024815.12352.69153.stgit@pluto.themaw.netSigned-off-by:
-
Tomohiro Kusumi authored
These two were left from commit aa55ddf3 ("autofs4: remove unused ioctls") which removed unused ioctls. Link: http://lkml.kernel.org/r/20160812024810.12352.96377.stgit@pluto.themaw.netSigned-off-by:
-
Tomohiro Kusumi authored
kfree dentry data allocated by autofs4_new_ino() with autofs4_free_ino() instead of raw kfree. (since we have the interface to free autofs_info*) This patch was modified to remove the need to set the dentry info field to NULL dew to a change in the previous patch. Link: http://lkml.kernel.org/r/20160812024805.12352.43650.stgit@pluto.themaw.netSigned-off-by:
-
Ian Kent authored
The inode allocation failure case in autofs4_dir_symlink() frees the autofs dentry info of the dentry without setting ->d_fsdata to NULL. That could lead to a double free so just get rid of the free and leave it to ->d_release(). Link: http://lkml.kernel.org/r/20160812024759.12352.10653.stgit@pluto.themaw.netSigned-off-by:
-
Tomohiro Kusumi authored
It's invalid if the given mode is neither dir nor link, so warn on else case. Link: http://lkml.kernel.org/r/20160812024754.12352.8536.stgit@pluto.themaw.netSigned-off-by:
-
Ian Kent authored
Somewhere along the line the error handling gotos have become incorrect. Link: http://lkml.kernel.org/r/20160812024749.12352.15100.stgit@pluto.themaw.netSigned-off-by:
-
Tomohiro Kusumi authored
This patch does what the below comment says. It could be and it's considered better to do this first before various functions get called during initialization. /* Couldn't this be tested earlier? */ Link: http://lkml.kernel.org/r/20160812024744.12352.43075.stgit@pluto.themaw.netSigned-off-by:
-
Tomohiro Kusumi authored
autofs4_kill_sb() doesn't need to be declared as extern, and no other functions in .h are explicitly declared as extern. Link: http://lkml.kernel.org/r/20160812024739.12352.99354.stgit@pluto.themaw.netSigned-off-by:
-
