- 16 Jun, 2021 1 commit
-
-
Phillip Potter authored
Remove empty label at end of mlmeext_joinbss_event_callback function, as it only contained a return in my last patch to make the code build. It is better removed, and the corresponding goto converted to a return. Signed-off-by:
Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20210615223607.13863-2-phil@philpotter.co.ukSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 15 Jun, 2021 39 commits
-
-
Sergio Paracuellos authored
Driver code call 'devm_of_pci_get_host_bridge_resources' to get resources and properly fill 'bridge->windows' and 'bridge->dma_ranges'. After parsing the ranges and store as resources, at the end it makes a call to pci function 'pci_add_resource_offset' to set the offset for the memory resource. To calculate offset, resource start address subtracts pci address of the range. MT7621 does not need any offset for the memory resource. Moreover, setting an offset got into 'WARN_ON' calls from pci devices driver code. Until now memory range pci_addr was being '0x00000000' and res->start is '0x60000000' but becase pci controller driver was manually setting resources and adding them using pci function 'pci_add_resource' where a zero is passed as offset, things was properly working. Since PCI_IOBASE is defined now for ralink we don't set nothing manually anymore so we have to properly fix PCI address for this range to make things work and the new pci address must be set to '0x60000000'. Doing in this way the subtract result obtain zero as offset and pci device driver code properly works. Fixes: d59578da ("staging: mt7621-dts: add dts files") Signed-off-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210614100617.28753-4-sergio.paracuellos@gmail.comSigned-off-by:
-
Sergio Paracuellos authored
After 'PCI_IOBASE' is defined for ralink, ranges are properly parsed using pci generic APIS and there is no need to parse anything manually. So function 'mt7621_pci_parse_request_of_pci_ranges' used for this can be enterely removed. Since we have to configure iocu memory regions and pci io windows resources must be retrieved accordly from 'bridge->windows' but there is no need to store anything as driver private data. Signed-off-by:
-
Sergio Paracuellos authored
PCI_IOBASE is used to create VM maps for PCI I/O ports, it is required by generic PCI drivers to make memory mapped I/O range work. Hence define it for ralink architectures to be able to avoid parsing manually IO ranges in PCI generic driver code. Function 'plat_mem_setup' for ralink is using 'set_io_port_base' call using '0xa0000000' as address, so use the same address in the definition to align things. Acked-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Fabio Aiuto authored
remove unused files from tree, for they are excluded by the build process. Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/ef7c21270ccaa2ee3d48b93d0a16fa55911c6cce.1623756906.git.fabioaiuto83@gmail.comSigned-off-by:
-
Fabio Aiuto authored
remove include/autoconf.h header file from tree. It just contains a compiler configuration check which is not needed. Reviewed-by:
-
Fabio Aiuto authored
move LPS_RPWM_WAIT_MS macro from include/autoconf.h to include/hal_btcoex.h in order to empty unneeded autoconf.h. Reviewed-by:
-
Fabio Aiuto authored
remove HAL_{BB,MAC,RF,FW}_ENABLE macros. They are used to turn on/off by hand some core capabilities we want to be always 'on'. So remove usages and definitions. Reviewed-by: -
Fabio Aiuto authored
remove unneeded DISABLE_BB_RF macro. This is just a symbolic constant used to disable by hand-edit some core hardware capabilities which we want to be always enabled. So just remove it. Reviewed-by:
-
Fabio Aiuto authored
remove unused WAKEUP_GPIO_IDX macro definition. Reviewed-by:
-
Fabio Aiuto authored
remove unneeded comments in include/autoconf.h Reviewed-by:
-
Fabio Aiuto authored
remove unused debug macro definition in include/autoconf.h Reviewed-by:
-
Phillip Potter authored
As all callers have now been removed, remove the definition of the DBG_88E macro itself. It is no longer required and is dead code. Signed-off-by:
-
Phillip Potter authored
Remove core/rtw_debug.c as all the functions contained within it are entirely unused, and modify the Makefile to remove it as a build requirement. Also remove the function declarations from include/rtw_debug.h - this is part of an ongoing effort to purge dead/unused code and cleanup this driver. This has the helpful side effect of removing all DBG_88E macro calls within this file as well. Signed-off-by:
-
Phillip Potter authored
Remove all previously converted netdev_dbg calls from core/rtw_sta_mgt.c, as these were originally DBG_88E macro calls, and therefore of dubious necessity to begin with. Signed-off-by:
-
Phillip Potter authored
Remove all previously converted netdev_dbg calls from core/rtw_recv.c, as these were originally DBG_88E macro calls, and therefore of dubious necessity to begin with. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from hal/rtl8188eu_xmit.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from hal/rtl8188eu_recv.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from hal/usb_halinit.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Also remove unused jiffies variable from the start of rtl8188eu_hal_init. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from hal/rtl8188e_xmit.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from hal/rtl8188e_hal_init.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from hal/pwrseqcmd.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from hal/rtl8188e_cmd.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from hal/hal_intf.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from os_dep/rtw_android.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from os_dep/xmit_linux.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from os_dep/mlme_linux.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from os_dep/os_intfs.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Also remove variable declarations for variables which now go unused as a result of this change with os_dep/os_intfs.c Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from os_dep/usb_intf.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from os_dep/ioctl_linux.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from core/rtw_mlme.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from core/rtw_ioctl_set.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from core/rtw_security.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from core/rtw_ieee80211.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from core/rtw_pwrctrl.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Also remove pmlmepriv declaration from within rtw_ps_processor as it is now no longer used. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from core/rtw_ap.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from core/rtw_wlan_util.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from core/rtw_mlme_ext.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Also remove variable declarations for variables which now go unused as a result of this change with core/rtw_mlme_ext.c Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from core/rtw_xmit.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Also remove static rtw_sctx_chk_warning_status function, as it no longer has any callers. Signed-off-by:
-
Phillip Potter authored
Remove all DBG_88E calls from core/rtw_efuse.c as this macro is unnecessary, and many of these calls are dubious in terms of necessity. Removing all calls will ultimately allow the removal of the macro itself. Signed-off-by:
-
