- 22 Dec, 2006 40 commits
-
-
Ivan Skytte Jorgensen authored
Signed-off-by:
Ivan Skytte Jorgensen <isj-sctp@i1.dk> Signed-off-by:
Sridhar Samudrala <sri@us.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sridhar Samudrala authored
This file contains protocol definitions and there are no SCTP apps that use this file. Signed-off-by:
-
Gerrit Renker authored
While looking at DCCP sequence numbers, I stumbled over a problem with the following definition of before in tcp.h: static inline int before(__u32 seq1, __u32 seq2) { return (__s32)(seq1-seq2) < 0; } Problem: This definition suffers from an an ambiguity, i.e. always before(a, (a + 2^31) % 2^32)) = 1 before((a + 2^31) % 2^32), a) = 1 In text: when the difference between a and b amounts to 2^31, a is always considered `before' b, the function can not decide. The reason is that implicitly 0 is `before' 1 ... 2^31-1 ... 2^31 Solution: There is a simple fix, by defining before in such a way that 0 is no longer `before' 2^31, i.e. 0 `before' 1 ... 2^31-1 By not using the middle between 0 and 2^32, before can be made unambiguous. This is achieved by testing whether seq2-seq1 > 0 (using signed 32-bit arithmetic). I attach a patch to codify this. Also the `after' relation is basically a redefinition of `before', it is now defined as a macro after before. Signed-off-by:Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
Adrian Bunk authored
This patch contains the following transformations from custom functions to standard kernel version: - fore200e_kmalloc() -> kzalloc() - fore200e_kfree() -> kfree() - fore200e_swap() -> cpu_to_be32() Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
This patch removes the unconverted ATM_TNETA1570 option that also lacks any code in the kernel. Signed-off-by:
-
Paul Moore authored
Back when the original NetLabel patches were being changed to use Netlink attributes correctly some code was accidentially dropped which set all of the undefined CIPSOv4 level and category mappings to a sentinel value. The result is the mappings data in the kernel contains bogus mappings which always map to zero. This patch restores the old/correct behavior by initializing the mapping data to the correct sentinel value. Signed-off-by:
Paul Moore <paul.moore@hp.com> Signed-off-by:
James Morris <jmorris@namei.org>
-
Paul Moore authored
There are a couple of cases where the user input for a CIPSOv4 DOI add operation was not being done soon enough; the result was unexpected behavior which was resulting in oops/panics/lockups on some platforms. This patch moves the existing input validation code earlier in the code path to protect against bogus user input. Signed-off-by:
-
Peter Zijlstra authored
- add flush_cache_page() for all those virtual indexed cache architectures. - handle s390. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Peter Korsgaard authored
The uartlite driver used to always enable the port even if request_port failed causing havoc. This patch fixes it. Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
-
Eric W. Biederman authored
This patch fixes the case when we reparent to a different thread in the same thread group. This modifies the code so that we do not send signals and do not change the signal to send to SIGCHLD unless we have change the thread group of our parents. It also suppresses sending pdeath_sig in this cas as well since the result of geppid doesn't change. Thanks to Oleg for spotting my bug of only fixing this for non-ptraced tasks. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Albert Cahalan <acahalan@gmail.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Roland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Coywolf Qi Hunt <qiyong@fc-cn.com> Acked-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Andrew Morton authored
compile.h is created super-late in the build. But proc_misc.c want to include it, and it's generally not sane to have a header file in include/linux be created at the end of the build: it's either not present or, worse, wrong for most of the build. So the patch arranges for compile.h to be built at the start of the build process. It also consolidates the compile.h rules with those for version.h and utsname.h, so they all get built together. I hope. My chances of having got this right are about 2%. Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Ingo Molnar authored
Fernando Lopez-Lezcano reported frequent scheduling latencies and audio xruns starting at the 2.6.18-rt kernel, and those problems persisted all until current -rt kernels. The latencies were serious and unjustified by system load, often in the milliseconds range. After a patient and heroic multi-month effort of Fernando, where he tested dozens of kernels, tried various configs, boot options, test-patches of mine and provided latency traces of those incidents, the following 'smoking gun' trace was captured by him: _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / IRQ_19-1479 1D..1 0us : __trace_start_sched_wakeup (try_to_wake_up) IRQ_19-1479 1D..1 0us : __trace_start_sched_wakeup <<...>-5856> (37 0) IRQ_19-1479 1D..1 0us : __trace_start_sched_wakeup (c01262ba 0 0) IRQ_19-1479 1D..1 0us : resched_task (try_to_wake_up) IRQ_19-1479 1D..1 0us : __spin_unlock_irqrestore (try_to_wake_up) ... <idle>-0 1...1 11us!: default_idle (cpu_idle) ... <idle>-0 0Dn.1 602us : smp_apic_timer_interrupt (c0103baf 1 0) ... <...>-5856 0D..2 618us : __switch_to (__schedule) <...>-5856 0D..2 618us : __schedule <<idle>-0> (20 162) <...>-5856 0D..2 619us : __spin_unlock_irq (__schedule) <...>-5856 0...1 619us : trace_stop_sched_switched (__schedule) <...>-5856 0D..1 619us : trace_stop_sched_switched <<...>-5856> (37 0) what is visible in this trace is that CPU#1 ran try_to_wake_up() for PID:5856, it placed PID:5856 on CPU#0's runqueue and ran resched_task() for CPU#0. But it decided to not send an IPI that no CPU - due to TS_POLLING. But CPU#0 never woke up after its NEED_RESCHED bit was set, and only rescheduled to PID:5856 upon the next lapic timer IRQ. The result was a 600+ usecs latency and a missed wakeup! the bug turned out to be an idle-wakeup bug introduced into the mainline kernel this summer via an optimization in the x86_64 tree: commit 495ab9c0 Author: Andi Kleen <ak@suse.de> Date: Mon Jun 26 13:59:11 2006 +0200 [PATCH] i386/x86-64/ia64: Move polling flag into thread_info_status During some profiling I noticed that default_idle causes a lot of memory traffic. I think that is caused by the atomic operations to clear/set the polling flag in thread_info. There is actually no reason to make this atomic - only the idle thread does it to itself, other CPUs only read it. So I moved it into ti->status. the problem is this type of change: if (!hlt_counter && boot_cpu_data.hlt_works_ok) { - clear_thread_flag(TIF_POLLING_NRFLAG); + current_thread_info()->status &= ~TS_POLLING; smp_mb__after_clear_bit(); while (!need_resched()) { local_irq_disable(); this changes clear_thread_flag() to an explicit clearing of TS_POLLING. clear_thread_flag() is defined as: clear_bit(flag, &ti->flags); and clear_bit() is a LOCK-ed atomic instruction on all x86 platforms: static inline void clear_bit(int nr, volatile unsigned long * addr) { __asm__ __volatile__( LOCK_PREFIX "btrl %1,%0" hence smp_mb__after_clear_bit() is defined as a simple compile barrier: #define smp_mb__after_clear_bit() barrier() but the explicit TS_POLLING clearing introduced by the patch: + current_thread_info()->status &= ~TS_POLLING; is not an atomic op! So the clearing of the TS_POLLING bit is freely reorderable with the reading of the NEED_RESCHED bit - and both now reside in different memory addresses. CPU idle wakeup very much depends on ordered memory ops, the clearing of the TS_POLLING flag must always be done before we test need_resched() and hit the idle instruction(s). [Symmetrically, the wakeup code needs to set NEED_RESCHED before it tests the TS_POLLING flag, so memory ordering is paramount.] Fernando's dual-core Athlon64 system has a sufficiently advanced memory ordering model so that it triggered this scenario very often. ( And it also turned out that the reason why these latencies never triggered on my testsystems is that i routinely use idle=poll, which was the only idle variant not affected by this bug. ) The fix is to change the smp_mb__after_clear_bit() to an smp_mb(), to act as an absolute barrier between the TS_POLLING write and the NEED_RESCHED read. This affects almost all idling methods (default, ACPI, APM), on all 3 x86 architectures: i386, x86_64, ia64. Signed-off-by:Ingo Molnar <mingo@elte.hu> Tested-by:
Fernando Lopez-Lezcano <nando@ccrma.Stanford.EDU> Signed-off-by:
-
Hisashi Hifumi authored
In the current jbd code, if a buffer on BJ_SyncData list is dirty and not locked, the buffer is refiled to BJ_Locked list, submitted to the IO and waited for IO completion. But the fsstress test showed the case that when a buffer was already submitted to the IO just before the buffer_dirty(bh) check, the buffer was not waited for IO completion. Following patch solves this problem. If it is assumed that a buffer is submitted to the IO before the buffer_dirty(bh) check and still being written to disk, this buffer is refiled to BJ_Locked list. Signed-off-by:
Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Jan Kara <jack@ucw.cz> Cc: "Stephen C. Tweedie" <sct@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Ben Dooks authored
The general gpio driver includes seem to now depend on having <linux/workqueue.h> included before they are. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
NeilBrown authored
While developing more functionality in mdadm I found some bugs in md... - When we remove a device from an inactive array (write 'remove' to the 'state' sysfs file - see 'state_store') would should not update the superblock information - as we may not have read and processed it all properly yet. - initialise all raid_disk entries to '-1' else the 'slot sysfs file will claim '0' for all devices in an array before the array is started. - all '\n' not to be present at the end of words written to sysfs files - when we use SET_ARRAY_INFO to set the md metadata version, set the flag to say that there is persistant metadata. - allow GET_BITMAP_FILE to be called on an array that hasn't been started yet. Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Andrew Morton authored
Linus sayeth: Google knows everything, and finds, on MS own site no less: "Windows 2000 default resources: One 4K memory window One 2 MB memory window Two 256-byte I/O windows" which is clearly utterly bogus and insufficient. But Microsoft apparently realized this, and: "Windows XP default resources: Because one memory window of 4K and one window of 2 MB are not sufficient for CardBus controllers in many configurations, Windows XP allocates larger memory windows to CardBus controllers where possible. However, resource windows are static (that is, the operating system does not dynamically allocate larger memory windows if new devices appear.) Under Windows XP, CardBus controllers will be assigned the following resources: One 4K memory window, as in Windows 2000 64 MB memory, if that amount of memory is available. If 64 MB is not available the controller will receive 32 MB; if 32 MB is not available, the controller will receive 16 MB; if 16 MB is not available, the bridge will receive 8 MB; and so on down to a minimum assignment of 1 MB in configurations where memory is too constrained for the operating system to provide a larger window. Two 256-byte I/O windows" So I think we have our answer. Windows uses one 4k window, and one 64MB window. And they are no more dynamic than we are (we _could_ try to do it dynamically, but let's face it, it's fairly painful to dynamically expand PCI bus resources - you may need to reprogram everything up to the root, so it would be absolutely crazy to do that unless you have some serious masochistic tendencies). So let's just increase our default value to 64M too. Cc: Markus Rechberger <mrechberger@gmail.com> Cc: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
Andrew Morton authored
text data bss dec hex filename before: 4036 44 0 4080 ff0 kernel/relay.o after: 3727 44 0 3771 ebb kernel/relay.o Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Tom Zanussi <zanussi@us.ibm.com> Signed-off-by: -
Jeremy Fitzhardinge authored
The PDA patches introduced a bug in ptrace: it reads eflags from the wrong place on the target's stack, but writes it back to the correct place. The result is a corrupted eflags, which is most visible when it turns interrupts off unexpectedly. This patch fixes this by making the ptrace code a little less fragile. It changes [gs]et_stack_long to take a straightforward byte offset into struct pt_regs, rather than requiring all callers to do a sizeof(struct pt_regs) offset adjustment. This means that the eflag's offset (EFL_OFFSET) on the target stack can be simply computed with offsetof(). Signed-off-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Frederik Deweerdt <deweerdt@free.fr> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Yasunori Goto authored
Fix compile error when config memory hotplug with numa on i386. The cause of compile error was missing of arch_add_memory(), remove_memory(), and memory_add_physaddr_to_nid(). Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Acked-by:
David Rientjes <rientjes@cs.washington.edu> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Maciej W. Rozycki authored
This is a change to include <linux/netdevice.h> in <linux/if_fddi.h> which is needed for "struct fddi_statistics". Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Martin Waitz authored
I don't have the time to work on Linux Documentation, so I really should document that in MAINTAINERS. With Randy, kernel-doc is in good hands anyway. Signed-off-by:
Martin Waitz <tali@admingilde.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Randy Dunlap authored
Make kernel-doc support unnamed (anonymous) structs and unions. There is one (union) in include/linux/skbuff.h (inside struct sk_buff) that is currently generating a kernel-doc warning, so this fixes that warning. Signed-off-by:
-
Vadim Lobanov authored
Christoph Hellwig has expressed concerns that the recent fdtable changes expose the details of the RCU methodology used to release no-longer-used fdtable structures to the rest of the kernel. The trivial patch below addresses these concerns by introducing the appropriate free_fdtable() calls, which simply wrap the release RCU usage. Since free_fdtable() is a one-liner, it makes sense to promote it to an inline helper. Signed-off-by:
Vadim Lobanov <vlobanov@speakeasy.net> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Paul Mackerras authored
This fixes some bugs in the gxt4500 framebuffer driver, and adds support for GXT6000P cards. First, I had the red and blue channels swapped in the colormap update code, resulting in penguins' noses and feet turning blue (though the penguins weren't actually shivering :). Secondly, the code that calculated the values to put in the PLL that generates the pixel clock wasn't observing some constraints that I wasn't originally aware of, but am now that I have some documentation on the chip. The GXT6000P is essentially identical from software's point of view, except for a different reference clock for the PLL, and the addition of a geometry engine (which this driver doesn't use). Signed-off-by:
Paul Mackerras <paulus@samba.org> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Akinobu Mita authored
It is unnecessary and invalid to call sysfs_remove_group() after sysfs_create_group() failure. Cc: Sebastien Bouchard <sebastien.bouchard@ca.kontron.com> Cc: Mark Gross <mark.gross@intel.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Ben Dooks authored
Change the email address for the S3C2410 and S3C2440 maintainer. The old addresses have been deleted due to spam issues. Signed-off-by:
-
Jean Delvare authored
Structure mc_cpu_notifier references a __cpuinit function, but isn't declared __cpuinitdata itself: WARNING: arch/i386/kernel/microcode.o - Section mismatch: reference to .init.text: from .data after 'mc_cpu_notifier' (at offset 0x118) Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Signed-off-by:
-
Andrew Morton authored
Kyle is hitting this warning, and we don't have a clue what it's caused by. Add the obligatory dump_stack(). Cc: kyle <kylewong@southa.com> Signed-off-by:
-
Akinobu Mita authored
Return error and prevent from loading module when gss_mech_register() failed. Cc: Andy Adamson <andros@citi.umich.edu> Cc: J. Bruce Fields <bfields@citi.umich.edu> Acked-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Akinobu Mita authored
kstrdup() returns NULL on error. Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Yasunori Goto authored
register_memory() becomes double definition in 2.6.20-rc1. It is defined in arch/i386/kernel/setup.c as static definition in 2.6.19. But it is moved to arch/i386/kernel/e820.c in 2.6.20-rc1. And same name function is defined in driver/base/memory.c too. So, it becomes cause of compile error of duplicate definition if memory hotplug option is on. Signed-off-by:
-
Yasunori Goto authored
This is to disallow to make SLOB with SMP or SPARSEMEM. This avoids latent troubles of SLOB with SLAB_DESTROY_BY_RCU. And fix compile error. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Nick Piggin authored
Add more debugging in the rmap code in an attempt to locate to source of the occasional "mapcount went negative" assertions. Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Ed L. Cashin authored
Fix a bug that only appears when AoE goes over a network card that does not support scatter-gather. The headers in the linear part of the skb appeared to be larger than they really were, resulting in data that was offset by 24 bytes. This patch eliminates the offset data on cards that don't support scatter-gather or have had scatter-gather turned off. There remains an unrelated issue that I'll address in a separate email. Fixes bugzilla #7662 Signed-off-by:
"Ed L. Cashin" <ecashin@coraid.com> Cc: <stable@kernel.org> Cc: Greg KH <greg@kroah.com> Cc: <boddingt@optusnet.com.au> Signed-off-by:
-
Robert P. J. Day authored
Add a new section to the CodingStyle file, encouraging people not to re-invent available kernel macros such as ARRAY_SIZE(), FIELD_SIZEOF(), min() and max(), among others. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Acked-by:
Jan Engelhardt <jengelh@gmx.de> Signed-off-by:
-
Josh Boyer authored
Mark JFFS as broken and provide a warning to users that it is deprecated and scheduled for removal in 2.6.21 Signed-off-by:
Josh Boyer <jwboyer@gmail.com> Signed-off-by:
-
Ingo Molnar authored
Matthew Wilcox noticed that the debug_locks_silent use should be inverted in DEBUG_LOCKS_WARN_ON(). This bug was causing spurious stacktraces and incorrect failures in the locking self-test on the parisc kernel. Bug-found-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Michael Halcrow authored
Trevor found a file size problem in eCryptfs in recent kernels, and he tracked it down to an fsstack change. This was the eCryptfs copy_attr_all: > -void ecryptfs_copy_attr_all(struct inode *dest, const struct inode *src) > -{ > - dest->i_mode = src->i_mode; > - dest->i_nlink = src->i_nlink; > - dest->i_uid = src->i_uid; > - dest->i_gid = src->i_gid; > - dest->i_rdev = src->i_rdev; > - dest->i_atime = src->i_atime; > - dest->i_mtime = src->i_mtime; > - dest->i_ctime = src->i_ctime; > - dest->i_blkbits = src->i_blkbits; > - dest->i_flags = src->i_flags; > -} This is the fsstack copy_attr_all: > +void fsstack_copy_attr_all(struct inode *dest, const struct inode *src, > + int (*get_nlinks)(struct inode *)) > +{ > + if (!get_nlinks) > + dest->i_nlink = src->i_nlink; > + else > + dest->i_nlink = (*get_nlinks)(dest); > + > + dest->i_mode = src->i_mode; > + dest->i_uid = src->i_uid; > + dest->i_gid = src->i_gid; > + dest->i_rdev = src->i_rdev; > + dest->i_atime = src->i_atime; > + dest->i_mtime = src->i_mtime; > + dest->i_ctime = src->i_ctime; > + dest->i_blkbits = src->i_blkbits; > + dest->i_flags = src->i_flags; > + > + fsstack_copy_inode_size(dest, src); > +} The addition of copy_inode_size breaks eCryptfs, since eCryptfs needs to interpolate the file sizes (eCryptfs has extra space in the lower file for the header). The setting of the upper inode size occurs elsewhere in eCryptfs, and the new copy_attr_all now undoes what eCryptfs was doing right beforehand. I see three ways of going forward from here. (1) Something like this patch needs to go in (assuming it jives with Unionfs), (2) we need to make a change to the fsstack API for more fine-grained control over copying attributes (e.g., by also including a callback function for calculating the right file size, which will require some more work on both eCryptfs and Unionfs), or (3) the fsstack patch on eCryptfs (commit 0cc72dc7 made on Fri Dec 8 02:36:31 2006 -0800) needs to be yanked in 2.6.20. I think the simplest solution, from eCryptfs' perspective, is to just remove the inode size copy. Remove inode size copy in general fsstack attr copy code. Stacked filesystems may need to interpolate the inode size, since the file size in the lower file may be different than the file size in the stacked layer. Signed-off-by:Michael Halcrow <mhalcrow@us.ibm.com> Acked-by:
Josef "Jeff" Sipek <jsipek@cs.sunysb.edu> Signed-off-by:
-
Andrew Morton authored
Teach this driver about the workqueue changes. Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Vitaly Wool authored
Fix the compilation failure for smc911x.c when NET_POLL_CONTROLLER is set. Signed-off-by:
Vitaly Wool <vitalywool@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: <stable@kernel.org> Signed-off-by:
-
