- 08 Feb, 2019 40 commits
-
-
Jiri Pirko authored
Do the split of region struct so the new region struct is related to the actual HW region, whereas vregion struct is a SW abstration of that. This split prepares possibility for vregion to hold 2 HW regions which is needed for region ERP rehash flow. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Count number of roots and add it to stats. It is handy for the library user to have this stats available as it can act upon it without counting roots itself. Signed-off-by:
-
Jiri Pirko authored
Implement simple greedy algo to find more optimized root-delta tree for a given objagg instance. This "hints" can be used by a driver to: 1) check if the hints are better (driver's choice) than the original objagg tree. Driver does comparison of objagg stats and hints stats. 2) use the hints to create a new objagg instance which will construct the root-delta tree according to the passed hints. Currently, only a simple greedy algorithm is implemented. Basically it finds the roots according to the maximal possible user count including deltas. Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
Currently, user can do dump or get of param values right after the devlink params are registered. However the driver may not be initialized which is an issue. The same problem happens during notification upon param registration. Allow driver to publish devlink params whenever it is ready to handle get() ops. Note that this cannot be resolved by init reordering, as the "driverinit" params have to be available before the driver is initialized (it needs the param values there). Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that, in this particular case, the fall-through annotation is placed at the beginning of the code comment, which is what GCC is expecting to find. Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by:
-
Pablo Neira Ayuso authored
Static checker warning complains on uninitialized variable: drivers/net/ethernet/netronome/nfp/flower/action.c:618 nfp_fl_pedit() error: uninitialized symbol 'idx'. Which is actually never used from the functions that take it as parameter. Remove it. Fixes: 73867881 ("drivers: net: use flow action infrastructure") Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Paul Fox authored
Signed-off-by:
Paul Fox <pfox@solarflare.com> Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "This pull request is dedicated to the upcoming snowpocalypse parts 2 and 3 in the Pacific Northwest: 1) Drop profiles are broken because some drivers use dev_kfree_skb* instead of dev_consume_skb*, from Yang Wei. 2) Fix IWLWIFI kconfig deps, from Luca Coelho. 3) Fix percpu maps updating in bpftool, from Paolo Abeni. 4) Missing station release in batman-adv, from Felix Fietkau. 5) Fix some networking compat ioctl bugs, from Johannes Berg. 6) ucc_geth must reset the BQL queue state when stopping the device, from Mathias Thore. 7) Several XDP bug fixes in virtio_net from Toshiaki Makita. 8) TSO packets must be sent always on queue 0 in stmmac, from Jose Abreu. 9) Fix socket refcounting bug in RDS, from Eric Dumazet. 10) Handle sparse cpu allocations in bpf selftests, from Martynas Pumputis. 11) Make sure mgmt frames have enough tailroom in mac80211, from Felix Feitkau. 12) Use safe list walking in sctp_sendmsg() asoc list traversal, from Greg Kroah-Hartman. 13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL ccid, from Eric Dumazet. 14) Need to reload WoL password into bcmsysport device after deep sleeps, from Florian Fainelli. 15) Remove filter from mask before freeing in cls_flower, from Petr Machata. 16) Missing release and use after free in error paths of s390 qeth code, from Julian Wiedmann. 17) Fix lockdep false positive in dsa code, from Marc Zyngier. 18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn. 19) Fix EQ firmware assert in qed driver, from Manish Chopra. 20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net: dsa: b53: Fix for failure when irq is not defined in dt sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach() geneve: should not call rt6_lookup() when ipv6 was disabled net: Don't default Cavium PTP driver to 'y' net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net/mlx5e: Don't overwrite pedit action when multiple pedit used net/mlx5e: Update hw flows when encap source mac changed qed*: Advance drivers version to 8.37.0.20 qed: Change verbosity for coalescing message. qede: Fix system crash on configuring channels. qed: Consider TX tcs while deriving the max num_queues for PF. ... -
Daniel Borkmann authored
Right now ipvlan has a hard dependency on CONFIG_NETFILTER and otherwise it cannot be built. However, the only ipvlan operation mode that actually depends on netfilter is l3s, everything else is independent of it. Break this hard dependency such that users are able to use ipvlan l3 mode on systems where netfilter is not compiled in. Therefore, this adds a hidden CONFIG_IPVLAN_L3S bool which is defaulting to y when CONFIG_NETFILTER is set in order to retain existing behavior for l3s. All l3s related code is refactored into ipvlan_l3s.c that is compiled in when enabled. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Martynas Pumputis <m@lambda.lt> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fixes from Greg KH: "Here are some small char and misc driver fixes for 5.0-rc6. Nothing huge here, some more binderfs fixups found as people use it, and there is a "large" selftest added to validate the binderfs code, which makes up the majority of this pull request. There's also some small mei and mic fixes to resolve some reported issues. All of these have been in linux-next for over a week with no reported issues" * tag 'char-misc-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mic: vop: Fix crash on remove mic: vop: Fix use-after-free on remove binderfs: remove separate device_initcall() fpga: stratix10-soc: fix wrong of_node_put() in init function mic: vop: Fix broken virtqueues mei: free read cb on ctrl_wr list flush samples: mei: use /dev/mei0 instead of /dev/mei mei: me: add ice lake point device id. binderfs: respect limit on binder control creation binder: fix CONFIG_ANDROID_BINDER_DEVICES selftests: add binderfs selftests
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here are some driver core fixes for 5.0-rc6. Well, not so much "driver core" as "debugfs". There's a lot of outstanding debugfs cleanup patches coming in through different subsystem trees, and in that process the debugfs core was found that it really should return errors when something bad happens, to prevent random files from showing up in the root of debugfs afterward. So debugfs was fixed up to handle this properly, and then two fixes for the relay and blk-mq code was needed as it was making invalid assumptions about debugfs return values. There's also a cacheinfo fix in here that resolves a tiny issue. All of these have been in linux-next for over a week with no reported problems" * tag 'driver-core-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: blk-mq: protect debugfs_create_files() from failures relay: check return of create_buf_file() properly debugfs: debugfs_lookup() should return NULL if not found debugfs: return error values, not NULL debugfs: fix debugfs_rename parameter checking cacheinfo: Keep the old value if of_property_read_u32 fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver fixes from Greg KH: "Here are some small iio and staging driver fixes for 5.0-rc6. Nothing big, just resolve some reported IIO driver issues, and one staging driver bug. One staging driver patch was added and then reverted as well. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Revert "staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()" staging: erofs: keep corrupted fs from crashing kernel in erofs_namei() staging: octeon: fix broken phylib usage iio: ti-ads8688: Update buffer allocation for timestamps tools: iio: iio_generic_buffer: make num_loops signed iio: adc: axp288: Fix TS-pin handling iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some small tty and serial fixes for 5.0-rc6. Nothing huge, just a few small fixes for reported issues. The speakup fix is in here as it is a tty operation issue. All of these have been in linux-next for a while with no reported problems" * tag 'tty-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: fix race between flush_to_ldisc and tty_open staging: speakup: fix tty-operation NULL derefs serial: sh-sci: Do not free irqs that have already been freed serial: 8250_pci: Make PCI class test non fatal tty: serial: 8250_mtk: Fix potential NULL pointer dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Grek KH: "Here are some small USB fixes for 5.0-rc6. Nothing huge, the normal amount of USB gadget fixes as well as some USB phy fixes. There's also a typec fix as well. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: tcpm: Correct the PPS out_volt calculation usb: gadget: musb: fix short isoc packets with inventra dma usb: phy: am335x: fix race condition in _probe usb: dwc3: exynos: Fix error handling of clk_prepare_enable usb: phy: fix link errors usb: gadget: udc: net2272: Fix bitwise and boolean operations usb: dwc3: gadget: Handle 0 xfer length for OUT EP
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "Here are a handful of XFS fixes to fix a data corruption problem, a crasher bug, and a deadlock. Summary: - Fix cache coherency problem with writeback mappings - Fix buffer deadlock when shutting fs down - Fix a null pointer dereference when running online repair" * tag 'xfs-5.0-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: set buffer ops when repair probes for btree type xfs: end sync buffer I/O properly on shutdown error xfs: eof trim writeback mapping as soon as it is cached
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Missed fixes last week as had nothing until amdgpu showed up on Saturday. Other stuff has since rolled in along with some more amdgpu fixes, so we have two weeks of those, and some i915, vmwgfx, sun4i, rockchip and omap fixes. amdgpu/radeon: - fix crash on passthrough for SI - fencing fix for shared buffers - APU hwmon fix - API powerplay fix - eDP freesync fix - PASID mgr locking fix - KFD warning fix - DC/powerplay fix - raven revision ids fix - vega20 doorbell fix i915: - SNB display fix - SKL srckey mask fix - ICL DDI clock selection fix vmwgfx: - DMA API fix - IOMMU detection fix - display fixes sun4i: - tcon clock fix rockchip: - SPDX identifier fix omap: - DSI fixes" * tag 'drm-fixes-2019-02-08' of git://anongit.freedesktop.org/drm/drm: (28 commits) drm/omap: dsi: Hack-fix DSI bus flags drm/omap: dsi: Fix OF platform depopulate drm/omap: dsi: Fix crash in DSI debug dumps drm/i915: Try to sanitize bogus DPLL state left over by broken SNB BIOSen drm/amd/display: Attach VRR properties for eDP connectors drm/amdkfd: Fix if preprocessor statement above kfd_fill_iolink_info_for_cpu drm/amdgpu: use spin_lock_irqsave to protect vm_manager.pasid_idr drm/i915: always return something on DDI clock selection drm/i915: Fix skl srckey mask bits drm/vmwgfx: Improve on IOMMU detection drm/vmwgfx: Fix setting of dma masks drm/vmwgfx: Also check for crtc status while checking for DU active drm/vmwgfx: Fix an uninitialized fence handle value drm/vmwgfx: Return error code from vmw_execbuf_copy_fence_user drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init drm/amdgpu: fix the incorrect external id for raven series drm/amdgpu: Implement doorbell self-ring for NBIO 7.4 drm/amd/display: Fix fclk idle state drm/amdgpu: Transfer fences to dmabuf importer drm/amd/powerplay: Fix missing break in switch ...
-
Arun Parameswaran authored
Fixes the issues with non BCM58XX chips in the b53 driver failing, when the irq is not specified in the device tree. Removed the check for BCM58XX in b53_srab_prepare_irq(), so the 'port->irq' will be set to '-EXIO' if the irq is not specified in the device tree. Fixes: 16994374 ("net: dsa: b53: Make SRAB driver manage port interrupts") Fixes: b2ddc48a ("net: dsa: b53: Do not fail when IRQ are not initialized") Signed-off-by:
Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Let genphy_c45_read_link manage the devices to check, this removes overhead from callers. Add C22EXT to the list of excluded devices because it doesn't implement the status register. According to the 802.3 clause 45 spec registers 29.0 - 29.4 are reserved. At the moment we have very few clause 45 PHY drivers, so we are lacking experience whether other drivers will have to exclude further devices, or may need to check PHY XS. If we should figure out that list of devices to check needs to be configurable, I think best will be to add a device list member to struct phy_driver. v2: - adjusted commit message - exclude also device C22EXT from link checking Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Moritz Fischer authored
Add fixed_phy_register_with_gpiod() API. It lets users create a fixed_phy instance that uses a GPIO descriptor which was obtained externally e.g. through platform data. This enables platform devices (non-DT based) to use GPIOs for link status. Signed-off-by:
Moritz Fischer <mdf@kernel.org> Reviewed-by:
-
David S. Miller authored
Russell King says: ==================== Add comphy support for Armada 38x This series adds support for the comphy for Armada 38x, which allows these SoCs to use 2500BASE-X mode with appropriate SFP modules. Tested on SolidRun Clearfog after updating for the 5.0 merge window changes. ==================== Signed-off-by: -
Russell King authored
Add the comphy settings for the Ethernet interfaces. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King authored
Add support for the common phy binding, so that we can reconfigure the comphy according to the desired ethernet speed. This will allow us to support 1000base-X and 2500base-X SFPs dynamically on SolidRun Clearfog. Signed-off-by:
-
Russell King authored
Add an optional phys property to the mvneta binding documentation for the common phy. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Russell King authored
Add the DT description for the Armada 38x common phy. Signed-off-by:
-
Russell King authored
Add support for the Armada 38x common phy to allow us to change the speed of the Ethernet serdes lane. This driver only supports manipulation of the speed, it does not support configuration of the common phy. Signed-off-by:
-
Russell King authored
Add the Marvell Armada 38x common phy bindings. Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: patches 2019-02-07 here are patches for SMC: * patches 1, 3, and 6 are cleanups without functional change * patch 2 postpones closing of internal clcsock * patches 4 and 5 improve link group creation locking * patch 7 restores AF_SMC as diag_family field ==================== Signed-off-by: -
Karsten Graul authored
Commit ed75986f ("net/smc: ipv6 support for smc_diag.c") changed the value of the diag_family field. The idea was to indicate the family of the IP address in the inet_diag_sockid field. But the change makes it impossible to distinguish an inet_sock_diag response message from SMC sock_diag response. This patch restores the original behaviour and sends AF_SMC as value of the diag_family field. Fixes: ed75986f ("net/smc: ipv6 support for smc_diag.c") Reported-by:
Eugene Syromiatnikov <esyr@redhat.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Karsten Graul authored
The lgr field of an smc_connection is set in smc_conn_create() and should be cleared in smc_conn_free() for consistency reasons, so move the responsible code. Signed-off-by:
-
Hans Wippel authored
If SMC client and server connections are both established at the same time, smc_connect_rdma() cannot send a CLC confirm message while smc_listen_work() is waiting for one due to lock contention. This can result in timeouts in smc_clc_wait_msg() and failed SMC connections. In case of SMC-R, there are two types of LGRs (client and server LGRs) which can be protected by separate locks. So, this patch splits the LGR pending lock into two separate locks for client and server to avoid the locking issue for SMC-R. Signed-off-by:
Hans Wippel <hwippel@linux.ibm.com> Signed-off-by:
-
Hans Wippel authored
If SMC client and server connections are both established at the same time, smc_connect_ism() cannot send a CLC confirm message while smc_listen_work() is waiting for one due to lock contention. This can result in timeouts in smc_clc_wait_msg() and failed SMC connections. In case of SMC-D, the LGR pending lock is not needed while smc_listen_work() is waiting for the CLC confirm message. So, this patch releases the lock earlier for SMC-D to avoid the locking issue. Signed-off-by:
-
Ursula Braun authored
SMC already provides a wrapper for atomic64 calls to be architecture independent. Use this wrapper for SMC-D as well. Reported-by:
Jens Remus <jremus@linux.ibm.com> Signed-off-by:
-
