- 06 Feb, 2019 2 commits
-
-
Brian Masney authored
This patch adds a new vibrator driver that supports various Qualcomm MSM SOCs. Driver was tested on a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Florian Fainelli authored
On some platforms (e.g.: ARCH_BRCMSTB) it is possible to enter "poweroff" while leaving some wake-up sources enabled such as key presses in order to allow for the system to wake-up. Wire up a .shutdown() callback which calls into the existing gpio_keys_suspend() since the logic is essentially the same. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 05 Feb, 2019 2 commits
-
-
Dmitry Torokhov authored
We should rely on the interrupt trigger (level vs edge) set up by the firmware or board code instead of forcing what we consider appropriate. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Richard Leitner authored
Some of the #defined register values are one-bit flags. Convert them to use the BIT(x) macro instead of 1 byte hexadecimal values. This improves readability and clarifies the intent. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 29 Jan, 2019 4 commits
-
-
Richard Leitner authored
of_touchscreen.c provides a common interface for a axis inversion and swapping of touchscreens. Therefore use it in the sx8654 driver. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Richard Leitner authored
The sx8654 and sx8650 are quite similar, therefore add support for the sx8650 within the sx8654 driver. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Rob Herring <robh@kernel.org> [dtor: use __be16 in sx8650_irq, add missing del_timer_sync] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Richard Leitner authored
As the sx865[456] share the same datasheet and differ only in the presence of a "capacitive proximity detection circuit" and a "haptics motor driver for LRA/ERM" add them to the compatbiles. As the driver doesn't implement these features it should be no problem. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Richard Leitner authored
The sx8654 features a NRST input which may be connected to a GPIO. Therefore add support for hard-resetting the sx8654 via this NRST. If the reset-gpio property is provided the sx8654 is resetted via NRST instead of the soft-reset via I2C. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 28 Jan, 2019 2 commits
-
-
Martin Kepplinger authored
This adds myself as an author of the st1232 driver module as Tony's email address doesn't seem to work anymore. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Martin Kepplinger authored
Add support for the Sitronix ST1633 touchscreen controller to the st1232 driver. A protocol spec can be found here: www.ampdisplay.com/documents/pdf/AM-320480B6TZQW-TC0H.pdf Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 14 Jan, 2019 7 commits
-
-
Marco Felsch authored
Unfortunately the evervision focaltech implementation uses two offset registers, one for the x coordinate and one for y. This patch extends the driver to handle those offset registers only for devices that support these. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Marco Felsch authored
Currently only the threshold and gain parameters can be read. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Marco Felsch authored
Evervision displays are using different Focaltech touchscreen controllers. This commit adds the initial support for the ones using the FT5726 controller. Receiving the touch data is the same as for the GENERIC_FT but the x and y cooridnates are swapped. The main differences are the register addresses where the GAIN and THRESHOLD parameters are stored. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
YueHaibing authored
iSOrt includes in alphabetical order and remove duplicated include file linux/kernel.h Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Merge with mainline to bring in the new APIs.
-
- 07 Jan, 2019 5 commits
-
-
Aditya Pakki authored
regmap_bulk_read() can return a non zero value on failure. The fix checks if the function call succeeded before calling mod_timer. The issue was identified by a static analysis tool. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jonathan Bakker authored
The touchkey variant found on aries board is slighty different, it uses a fixed regulator and writes/read to the same place Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jonathan Bakker authored
Not all devices use the same keycodes in the same order, so add possibility to define keycodes for buttons present on actual hardware. If keycodes property is not present, we assume that device has at least MENU and BACK keys. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jonathan Bakker authored
tm2-touchkey doesn't have brightness levels, but only on/off states, so replace LED_FULL with LED_ON. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Simon Shields authored
The touchkey on midas boards is almost identical. The only real difference is that it uses the same register for both keycode and base. Signed-off-by: Simon Shields <simon@lineageos.org> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 04 Jan, 2019 2 commits
-
-
Hans de Goede authored
The Microsoft documenation for the PNP0C40 device aka the "Windows-compatible button array" describes the 5th GpioInt listed in the resources as: '5. Interrupt corresponding to the "Rotation Lock" button, if supported'. Notice this describes the 5th entry as a button while we sofar have been mapping it to EV_SW, SW_ROTATE_LOCK. On my Point of View TAB P1006W-232 which actually comes with a rotation-lock button, the button indeed is a button and not a slider/switch. An image search for other Windows tablets has found 2 more models with a rotation-lock button and on both of those it too is a push-button and not a slider/switch. Further evidence can be found in the HUT extension HUTRR52 from Microsoft which adds rotation lock support to the HUT, which describes 2 different usages: "0xC9 System Display Rotation Lock Button" and "0xCA System Display Rotation Lock Slider Switch" note that switch is seen as a separate thing here and the non switch wording is an exact match for the "Windows-compatible button array" spec wording. TL;DR: our current mapping of the 5th GPIO to SW_ROTATE_LOCK is wrong because the 5th GPIO is for a push-button not a switch. This commit fixes this by maping the 5th GPIO to KEY_ROTATE_LOCK_TOGGLE. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
The ACPI0011 _DSD button descriptor on a CHT based Intel Compute Sticks contains a mapping for usage-page 0x01 usage-id 0xca. As described in hutrr52_system_display_rotation_lock_controls_0.pdf this should be mapped as a "System Display Rotation Lock Slider Switch", this commit adds support for this, silencing the following warning: soc_button_array ACPI0011:00: Unknown button index 4 upage 01 usage ca, ignoring Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 29 Dec, 2018 1 commit
-
-
Sanjeev Chugh authored
If the user attempts to update Atmel device with an invalid configuration cfg file, error handling code is trying to free cfg file memory which is not allocated yet hence results into kernel crash. This patch fixes the order of memory free operations. Signed-off-by: Sanjeev Chugh <sanjeev_chugh@mentor.com> Fixes: a4891f10 ("Input: atmel_mxt_ts - zero terminate config firmware file") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 23 Dec, 2018 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "A couple of fixes - no common topic ;-)" [ The aio spectre patch also came in from Jens, so now we have that doubly fixed .. ] * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: proc/sysctl: don't return ENOMEM on lookup when a table is unregistering aio: fix spectre gadget in lookup_ioctx
-
- 22 Dec, 2018 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is two simple target fixes and one discard related I/O starvation problem in sd. The discard problem occurs because the discard page doesn't have a mempool backing so if the allocation fails due to memory pressure, we then lose the forward progress we require if the writeout is on the same device. The fix is to back it with a mempool" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: use mempool for discard special page scsi: target: iscsi: cxgbit: add missing spin_lock_init() scsi: target: iscsi: cxgbit: fix csk leak
-
https://github.com/ojeda/linuxLinus Torvalds authored
Pull compiler_types.h fix from Miguel Ojeda: "A cleanup for userspace in compiler_types.h: don't pollute userspace with macro definitions (Xiaozhou Liu) This is harmless for the kernel, but v4.19 was released with a few macros exposed to userspace as the patch explains; which this removes, so it *could* happen that we break something for someone (although leaving inline redefined is probably worse)" * tag 'compiler-attributes-for-linus-v4.20' of https://github.com/ojeda/linux: include/linux/compiler_types.h: don't pollute userspace with macro definitions
-
https://github.com/ojeda/linuxLinus Torvalds authored
Pull auxdisplay fix from Miguel Ojeda: "charlcd: fix x/y command parsing (Mans Rullgard)" * tag 'auxdisplay-for-linus-v4.20' of https://github.com/ojeda/linux: auxdisplay: charlcd: fix x/y command parsing
-
Christian Brauner authored
This reverts commit 55956b59. commit 55956b59 ("vfs: Allow userns root to call mknod on owned filesystems.") enabled mknod() in user namespaces for userns root if CAP_MKNOD is available. However, these device nodes are useless since any filesystem mounted from a non-initial user namespace will set the SB_I_NODEV flag on the filesystem. Now, when a device node s created in a non-initial user namespace a call to open() on said device node will fail due to: bool may_open_dev(const struct path *path) { return !(path->mnt->mnt_flags & MNT_NODEV) && !(path->mnt->mnt_sb->s_iflags & SB_I_NODEV); } The problem with this is that as of the aforementioned commit mknod() creates partially functional device nodes in non-initial user namespaces. In particular, it has the consequence that as of the aforementioned commit open() will be more privileged with respect to device nodes than mknod(). Before it was the other way around. Specifically, if mknod() succeeded then it was transparent for any userspace application that a fatal error must have occured when open() failed. All of this breaks multiple userspace workloads and a widespread assumption about how to handle mknod(). Basically, all container runtimes and systemd live by the slogan "ask for forgiveness not permission" when running user namespace workloads. For mknod() the assumption is that if the syscall succeeds the device nodes are useable irrespective of whether it succeeds in a non-initial user namespace or not. This logic was chosen explicitly to allow for the glorious day when mknod() will actually be able to create fully functional device nodes in user namespaces. A specific problem people are already running into when running 4.18 rc kernels are failing systemd services. For any distro that is run in a container systemd services started with the PrivateDevices= property set will fail to start since the device nodes in question cannot be opened (cf. the arguments in [1]). Full disclosure, Seth made the very sound argument that it is already possible to end up with partially functional device nodes. Any filesystem mounted with MS_NODEV set will allow mknod() to succeed but will not allow open() to succeed. The difference to the case here is that the MS_NODEV case is transparent to userspace since it is an explicitly set mount option while the SB_I_NODEV case is an implicit property enforced by the kernel and hence opaque to userspace. [1]: https://github.com/systemd/systemd/pull/9483Signed-off-by: Christian Brauner <christian@brauner.io> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Serge Hallyn <serge@hallyn.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Hellwig authored
We really need the writecombine flag in dma_alloc_wc, fix a stupid oversight. Fixes: 7ed1d91a ("dma-mapping: translate __GFP_NOFAIL to DMA_ATTR_NO_WARN") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Colin Ian King authored
There are some statements that are indented incorrectly, fix this by removing the extra tabs. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 21 Dec, 2018 7 commits
-
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "4 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, page_alloc: fix has_unmovable_pages for HugePages fork,memcg: fix crash in free_thread_stack on memcg charge fail mm: thp: fix flags for pmd migration when split mm, memory_hotplug: initialize struct pages for the full memory section
-
Oscar Salvador authored
While playing with gigantic hugepages and memory_hotplug, I triggered the following #PF when "cat memoryX/removable": BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 1481 Comm: cat Tainted: G E 4.20.0-rc6-mm1-1-default+ #18 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:has_unmovable_pages+0x154/0x210 Call Trace: is_mem_section_removable+0x7d/0x100 removable_show+0x90/0xb0 dev_attr_show+0x1c/0x50 sysfs_kf_seq_show+0xca/0x1b0 seq_read+0x133/0x380 __vfs_read+0x26/0x180 vfs_read+0x89/0x140 ksys_read+0x42/0x90 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The reason is we do not pass the Head to page_hstate(), and so, the call to compound_order() in page_hstate() returns 0, so we end up checking all hstates's size to match PAGE_SIZE. Obviously, we do not find any hstate matching that size, and we return NULL. Then, we dereference that NULL pointer in hugepage_migration_supported() and we got the #PF from above. Fix that by getting the head page before calling page_hstate(). Also, since gigantic pages span several pageblocks, re-adjust the logic for skipping pages. While are it, we can also get rid of the round_up(). [osalvador@suse.de: remove round_up(), adjust skip pages logic per Michal] Link: http://lkml.kernel.org/r/20181221062809.31771-1-osalvador@suse.de Link: http://lkml.kernel.org/r/20181217225113.17864-1-osalvador@suse.deSigned-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rik van Riel authored
Commit 9b6f7e16 ("mm: rework memcg kernel stack accounting") will result in fork failing if allocating a kernel stack for a task in dup_task_struct exceeds the kernel memory allowance for that cgroup. Unfortunately, it also results in a crash. This is due to the code jumping to free_stack and calling free_thread_stack when the memcg kernel stack charge fails, but without tsk->stack pointing at the freshly allocated stack. This in turn results in the vfree_atomic in free_thread_stack oopsing with a backtrace like this: #5 [ffffc900244efc88] die at ffffffff8101f0ab #6 [ffffc900244efcb8] do_general_protection at ffffffff8101cb86 #7 [ffffc900244efce0] general_protection at ffffffff818ff082 [exception RIP: llist_add_batch+7] RIP: ffffffff8150d487 RSP: ffffc900244efd98 RFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88085ef55980 RCX: 0000000000000000 RDX: ffff88085ef55980 RSI: 343834343531203a RDI: 343834343531203a RBP: ffffc900244efd98 R8: 0000000000000001 R9: ffff8808578c3600 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88029f6c21c0 R13: 0000000000000286 R14: ffff880147759b00 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffc900244efda0] vfree_atomic at ffffffff811df2c7 #9 [ffffc900244efdb8] copy_process at ffffffff81086e37 #10 [ffffc900244efe98] _do_fork at ffffffff810884e0 #11 [ffffc900244eff10] sys_vfork at ffffffff810887ff #12 [ffffc900244eff20] do_syscall_64 at ffffffff81002a43 RIP: 000000000049b948 RSP: 00007ffcdb307830 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 0000000000896030 RCX: 000000000049b948 RDX: 0000000000000000 RSI: 00007ffcdb307790 RDI: 00000000005d7421 RBP: 000000000067370f R8: 00007ffcdb3077b0 R9: 000000000001ed00 R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000040 R13: 000000000000000f R14: 0000000000000000 R15: 000000000088d018 ORIG_RAX: 000000000000003a CS: 0033 SS: 002b The simplest fix is to assign tsk->stack right where it is allocated. Link: http://lkml.kernel.org/r/20181214231726.7ee4843c@imladris.surriel.com Fixes: 9b6f7e16 ("mm: rework memcg kernel stack accounting") Signed-off-by: Rik van Riel <riel@surriel.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Peter Xu authored
When splitting a huge migrating PMD, we'll transfer all the existing PMD bits and apply them again onto the small PTEs. However we are fetching the bits unconditionally via pmd_soft_dirty(), pmd_write() or pmd_yound() while actually they don't make sense at all when it's a migration entry. Fix them up. Since at it, drop the ifdef together as not needed. Note that if my understanding is correct about the problem then if without the patch there is chance to lose some of the dirty bits in the migrating pmd pages (on x86_64 we're fetching bit 11 which is part of swap offset instead of bit 2) and it could potentially corrupt the memory of an userspace program which depends on the dirty bit. Link: http://lkml.kernel.org/r/20181213051510.20306-1-peterx@redhat.comSigned-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: <stable@vger.kernel.org> [4.14+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikhail Zaslonko authored
If memory end is not aligned with the sparse memory section boundary, the mapping of such a section is only partly initialized. This may lead to VM_BUG_ON due to uninitialized struct page access from is_mem_section_removable() or test_pages_in_a_zone() function triggered by memory_hotplug sysfs handlers: Here are the the panic examples: CONFIG_DEBUG_VM=y CONFIG_DEBUG_VM_PGFLAGS=y kernel parameter mem=2050M -------------------------- page:000003d082008000 is uninitialized and poisoned page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) Call Trace: ( test_pages_in_a_zone+0xde/0x160) show_valid_zones+0x5c/0x190 dev_attr_show+0x34/0x70 sysfs_kf_seq_show+0xc8/0x148 seq_read+0x204/0x480 __vfs_read+0x32/0x178 vfs_read+0x82/0x138 ksys_read+0x5a/0xb0 system_call+0xdc/0x2d8 Last Breaking-Event-Address: test_pages_in_a_zone+0xde/0x160 Kernel panic - not syncing: Fatal exception: panic_on_oops kernel parameter mem=3075M -------------------------- page:000003d08300c000 is uninitialized and poisoned page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) Call Trace: ( is_mem_section_removable+0xb4/0x190) show_mem_removable+0x9a/0xd8 dev_attr_show+0x34/0x70 sysfs_kf_seq_show+0xc8/0x148 seq_read+0x204/0x480 __vfs_read+0x32/0x178 vfs_read+0x82/0x138 ksys_read+0x5a/0xb0 system_call+0xdc/0x2d8 Last Breaking-Event-Address: is_mem_section_removable+0xb4/0x190 Kernel panic - not syncing: Fatal exception: panic_on_oops Fix the problem by initializing the last memory section of each zone in memmap_init_zone() till the very end, even if it goes beyond the zone end. Michal said: : This has alwways been problem AFAIU. It just went unnoticed because we : have zeroed memmaps during allocation before f7f99100 ("mm: stop : zeroing memory during allocation in vmemmap") and so the above test : would simply skip these ranges as belonging to zone 0 or provided a : garbage. : : So I guess we do care for post f7f99100 kernels mostly and : therefore Fixes: f7f99100 ("mm: stop zeroing memory during : allocation in vmemmap") Link: http://lkml.kernel.org/r/20181212172712.34019-2-zaslonko@linux.ibm.com Fixes: f7f99100 ("mm: stop zeroing memory during allocation in vmemmap") Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Suggested-by: Michal Hocko <mhocko@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "Just some small fixes here and there, and a refcount leak in a serial driver, nothing serious" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: serial/sunsu: fix refcount leak sparc: Set "ARCH: sunxx" information on the same line sparc: vdso: Drop implicit common-page-size linker flag
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull more networking fixes from David Miller: "Some more bug fixes have trickled in, we have: 1) Local MAC entries properly in mscc driver, from Allan W. Nielsen. 2) Eric Dumazet found some more of the typical "pskb_may_pull() --> oops forgot to reload the header pointer" bugs in ipv6 tunnel handling. 3) Bad SKB socket pointer in ipv6 fragmentation handling, from Herbert Xu. 4) Overflow fix in sk_msg_clone(), from Vakul Garg. 5) Validate address lengths in AF_PACKET, from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: qmi_wwan: Fix qmap header retrieval in qmimux_rx_fixup qmi_wwan: Add support for Fibocom NL678 series tls: Do not call sk_memcopy_from_iter with zero length ipv6: tunnels: fix two use-after-free Prevent overflow of sk_msg in sk_msg_clone() packet: validate address length net: netxen: fix a missing check and an uninitialized use tcp: fix a race in inet_diag_dump_icsk() MAINTAINERS: update cxgb4 and cxgb3 maintainer ipv6: frags: Fix bogus skb->sk in reassembled packets mscc: Configured MAC entries should be locked.
-