- 07 Jun, 2023 2 commits
-
-
Dmitry Baryshkov authored
Currently the driver passes the PINGPONG index to dpu_hw_wb_ops::bind_pingpong_blk() callback and uses separate boolean flag to tell whether WB should be bound or unbound. Simplify this by passing PINGPONG_NONE in case of unbinding and drop the flag completely. Suggested-by:
Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Dmitry Baryshkov authored
Currently the driver passes the PINGPONG index to dpu_hw_intf_ops::bind_pingpong_blk() callback and uses separate boolean flag to tell whether INTF should be bound or unbound. Simplify this by passing PINGPONG_NONE in case of unbinding and drop the flag completely. Signed-off-by:
-
- 04 Jun, 2023 24 commits
-
-
Dmitry Baryshkov authored
There is no need to assign a result to temp varable just to return it after a goto. Drop the temporary variable and goto and return the result directly. Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by:
-
Dmitry Baryshkov authored
There is no need to assign a result to temp varable just to return it two lines below. Drop the temporary variable. Reviewed-by:
-
Dmitry Baryshkov authored
There is little sense to get intf index just to call dpu_rm_get_intf() on it. Move dpu_rm_get_intf() call to dpu_encoder_get_intf() function. Reviewed-by:
-
Dmitry Baryshkov authored
The function dpu_encoder_get_wb() returns controller_id if the corresponding WB is present in the catalog. We can inline this function and rely on dpu_rm_get_wb() returning NULL for indices for which the WB is not present on the device. Reviewed-by:
-
Dmitry Baryshkov authored
Remove intf_idx and wb_idx fields from struct dpu_encoder_phys and struct dpu_enc_phys_init_params. Set the hw_intf and hw_wb directly and use them to get the instance index. Reviewed-by:
-
Dmitry Baryshkov authored
Move common DPU physical encoder initialization code to the new function dpu_encoder_phys_init(). Reviewed-by:
-
Dmitry Baryshkov authored
There is no reason to split the dpu_encoder interface into separate _init() and _setup() phases. Merge them into a single function. Reviewed-by:
-
Dan Carpenter authored
Static analysis tools complain about the -EINVAL error code being stored in an unsigned variable. Let's change this to match the clk_get_rate() function which is type unsigned long and returns zero on error. Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
-
Kuogee Hsieh authored
Unset DSC_ACTIVE bit at dpu_hw_ctl_reset_intf_cfg_v1(), dpu_encoder_unprep_dsc() and dpu_encoder_dsc_pipe_clr() functions to tear down DSC data path if DSC data path was setup previous. Changes in V10: -- pass ctl directly instead of dpu_enc to dsc_pipe_cfg() -- move both dpu_encoder_unprep_dsc() and dpu_encoder_dsc_pipe_clr() to above phys_cleanup() Signed-off-by:
Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by:
-
Kuogee Hsieh authored
Currently DSC flushing happens during interface configuration at dpu_hw_ctl_intf_cfg_v1(). Separate DSC flush away from dpu_hw_ctl_intf_cfg_v1() by adding dpu_hw_ctl_update_pending_flush_dsc_v1() to handle both per-DSC engine and DSC flush bits at same time to make it consistent with the location of flush programming of other DPU sub-blocks. Changes in v10: -- rewording commit text -- pass ctl directly instead of dpu_enc to dsc_pipe_cfg() -- ctx->pending_dsc_flush_mask = 0; Changes in v11: -- add Fixes tag Changes in v12: -- move dsc parameter to next line at dpu_encoder_dsc_pipe_cfg() Changes in v14: -- Fixes tag had been move to 1st patch of this series Signed-off-by:
-
Kuogee Hsieh authored
There are two tiers of pending flush control, top level and individual hardware block. Currently only the top level of flush mask is reset to 0 but the individual pending flush masks of particular hardware blocks are left at their previous values, eventually accumulating all possible bit values and typically flushing more than necessary. Reset all individual hardware block flush masks to 0 to avoid accidentally flushing them. Changes in V13: -- rewording commit text -- add an empty space line as suggested Changes in V14: -- add Fixes tag Fixes: 73bfb790 ("msm:disp:dpu1: setup display datapath for SC7180 target") Signed-off-by:
-
Kuogee Hsieh authored
Disabling the crossbar mux between DSC and PINGPONG currently requires a bogus enum dpu_pingpong value to be passed when calling dsc_bind_pingpong_blk() with enable=false, even though the register value written is independent of the current PINGPONG block. Replace that `bool enable` parameter with a new PINGPONG_NONE dpu_pingpong flag that triggers the write of the "special" 0xF "crossbar disabled" value to the register instead. Changes in v4: -- more details to commit text Changes in v5: -- rewording commit text suggested by Marijn -- add DRM_DEBUG_KMS for DSC unbinding case Changes in v8: -- fix checkpatch warning Signed-off-by:
-
Kuogee Hsieh authored
DPU < 7.0.0 has DPU_PINGPONG_DSC feature bit set to indicate it requires both dpu_hw_pp_setup_dsc() and dpu_hw_pp_dsc_{enable,disable}() to be executed to complete DSC configuration if DSC hardware block is present. Hence test DPU_PINGPONG_DSC feature bit and assign DSC related functions to the ops of PINGPONG block accordingly if DPU_PINGPONG_DSC bit is set. Changes in v6: -- split patches, this patch has function handles DPU_PINGPONG_DSC bit Changes in v9: -- the original code of assigning dsc related functions to the ops of pingpong block without testing the DPU_PINGPONG_DSC feature bit was restored back due to rebase error which defeat the purpose of this patch. Remove those error code. Changes in v10: -- change commit title -- correct texts at changes in v9 Changes in v12: -- fixed length too long at Changes in v9 Signed-off-by: -
Kuogee Hsieh authored
DPU < 7.0.0 requires the PINGPONG block to be involved during DSC setting up. Since DPU >= 7.0.0, enabling and starting the DSC encoder engine was moved to INTF with the help of the flush mechanism. Add a DPU_PINGPONG_DSC feature bit to restrict the availability of dpu_hw_pp_setup_dsc() and dpu_hw_pp_dsc_{enable,disable}() on the PINGPONG block to DPU < 7.0.0 hardware, as the registers are not available on DPU 7.0.0 and higher anymore. Add DPU_PINGPONG_DSC to PINGPONG_SDM845_MASK, PINGPONG_SDM845_TE2_MASK and PINGPONG_SM8150_MASK which is used for all DPU < 7.0 chipsets. changes in v6: -- split patches and rearrange to keep catalog related files at this patch changes in v7: -- rewording commit text as suggested at review comments changes in v9: -- delete BIT(DPU_PINGPONG_DSC) from PINGPONG_SDM845_TE2_MASK changes in v10: -- correct order of commit text Signed-off-by: -
Kuogee Hsieh authored
The CTL_FLUSH register should be programmed with the 22th bit (DSC_IDX) to flush the DSC hardware blocks, not the literal value of 22 (which corresponds to flushing VIG1, VIG2 and RGB1 instead). Changes in V12: -- split this patch out of "separate DSC flush update out of interface" Changes in V13: -- rewording the commit text Changes in V14: -- drop 'DSC" from "The DSC CTL_FLUSH register" at commit text Fixes: 77f6da90 ("drm/msm/disp/dpu1: Add DSC support in hw_ctl") Signed-off-by:
-
Dmitry Baryshkov authored
Rework SSPP and WB code to use common helper for programming QoS settings. Reviewed-by:
Jeykumar Sankaran <quic_jeykumar@quicinc.com> Signed-off-by:
-
Dmitry Baryshkov authored
Now as the struct dpu_hw_pipe_qos_cfg consists of only one bool field, drop the structure and use corresponding bool directly. Reviewed-by:
-
Dmitry Baryshkov authored
This flag is always passed to _dpu_plane_set_qos_ctrl(), so drop it and remove corresponding conditions from the mentioned function. Reviewed-by:
-
Dmitry Baryshkov authored
After removal of DPU_PLANE_QOS_VBLANK_CTRL, several fields of struct dpu_hw_pipe_qos_cfg are fixed to false/0. Drop them from the structure (and drop the corresponding code from the functions). The DPU_PLANE_QOS_VBLANK_AMORTIZE flag is also removed, since it is now a NOP. Reviewed-by:
-
Dmitry Baryshkov authored
Drop support for DPU_PLANE_QOS_VBLANK_CTRL flag. It is not used both in upstream driver and in vendor SDE driver. Reviewed-by:
-
Dmitry Baryshkov authored
Slightly rearrainge code in dpu_plane_sspp_update_pipe() to group QoS/LUT related functions. Reviewed-by:
-
Dmitry Baryshkov authored
The function dpu_plane_sspp_update_pipe() contains code to skip enabling the QoS and OT limitis for CURSOR pipes. However all DPU since sdm845 repurpose DMA SSPP for the cursor planes because they lack the real CURSOR SSPP. Fix the condition to actually check that the plane is CURSOR or not. Reviewed-by:
-
Dmitry Baryshkov authored
Get rid of intermediatory configuration structure and defines. Pass the format and the enablement bit directly to the new helper. The WB_CDP_CNTL register ignores BIT(2), so we can write it for both SSPP and WB CDP settings. Reviewed-by:
-
Dmitry Baryshkov authored
Reorder SSPP register definitions to sort them in the ascending order. Move register bitfields after the register definitions. Signed-off-by:
-
- 22 May, 2023 14 commits
-
-
Dmitry Baryshkov authored
Move the check for lm->pingpong being not NONE from dpu_rm_init() to dpu_lm_init(), following the change to dpu_hw_intf_init(). Suggested-by:
-
Dmitry Baryshkov authored
On msm8998/sdm845 some LM blocks do not have corresponding PINGPONG block. Currently the driver uses PINGPONG_MAX for such cases. Switch that to use PINGPONG_NONE instead, which is more logical. Reviewed-by:
-
Dmitry Baryshkov authored
dpu_rm_init() contains checks for block->id values. These were logical in the vendor driver, when one can not be sure which values were passed from DT. In the upstream driver this is not necessary: the catalog is a part of the driver, we control specified IDs. Suggested-by:
-
Dmitry Baryshkov authored
Using IS_ERR_OR_NULL() together with PTR_ERR() is a typical mistake. If the value is NULL, then the function will return 0 instead of a proper return code. Moreover dpu_hw_dsc_init() can not return NULL. Replace the IS_ERR_OR_NULL() call with IS_ERR(). This follows the commit 740828c7 ("drm/msm/dpu: fix error handling in dpu_rm_init"), which removed IS_ERR_OR_NULL() from RM init code, but then the commit f2803ee9 ("drm/msm/disp/dpu1: Add DSC support in RM") added it for DSC init. Suggested-by:
-
Konrad Dybcio authored
DPU5 and newer targets enable this unconditionally. Move it from the SC7280 mask to the SC7180 one. Fixes: 7e6ee553 ("drm/msm/disp/dpu1: enable DATA_HCTL_EN for sc7280 target") Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
-
Dmitry Baryshkov authored
Stop using _sspp_subblk_offset() to get offset of the csc_blk. Inline this function and use ctx->cap->sblk->csc_blk.base directly. As this was the last user, drop _sspp_subblk_offset() too. Reviewed-by:
-
Dmitry Baryshkov authored
Stop using _sspp_subblk_offset() to get offset of the scaler_blk. Inline this function and use ctx->cap->sblk->scaler_blk.base directly. Reviewed-by:
-
Dmitry Baryshkov authored
The src_blk declares a lame copy of main SSPP register space. It's offset is always 0. It's length has been fixed to 0x150, while SSPP's length is now correct. Drop the src_blk and access SSPP registers without additional subblock lookup. Signed-off-by:
-
Marijn Suijten authored
Now that newer DPU platforms use a readpointer-done interrupt on the INTF block, stop providing the unused interrupt on the PINGPONG block. Signed-off-by:
-
Marijn Suijten authored
Since DPU 5.0.0 the TEARCHECK registers and interrupts moved out of the PINGPONG block and into the INTF. Implement the necessary callbacks in the INTF block, and use these callbacks together with the INTF_TEAR interrupts. Signed-off-by:
-
Marijn Suijten authored
These functions are always called consecutively and are best bundled together for simplicity, especially when the same structure of callbacks will be replicated later on the interface block for INTF TE support. The enable_tearcheck(false) case is now replaced with a more obvious disable_tearcheck(), encapsulating the original register write with 0. Suggested-by:
-
Marijn Suijten authored
All SoCs since DPU 5.0.0 have the tear interrupt registers moved out of the PINGPONG block and into the INTF block. The new interrupts are described in dpu_hw_interrupts.c, now wire them up in individual SoC catalog files by setting the intr_tear_rd_ptr to the IRQ index spcified in the offset table and enabling this set of DPU interrupts via the mdss_irqs bitmask. Signed-off-by:
-
Marijn Suijten authored
All SoCs since DPU 5.0.0 have the tear interrupt registers moved out of the PINGPONG block and into the INTF block. Wire up the IRQ register masks in the interrupt table for enabling, reading and clearing them. Signed-off-by:
-
Marijn Suijten authored
As the INTF block is going to attain more interrupts that don't share the same MDP_SSPP_TOP0_INTR register, factor out the _reg argument for the caller to construct the right interrupt index (register and bit index) to not make the interrupt bit arguments depend on one of multiple interrupt register indices. This brings us more in line with how PP_BLK specifies its interrupts and allows for better wrapping in the arrays. Signed-off-by:
-
