- 20 Jul, 2022 14 commits
-
-
Marc Zyngier authored
* irq/loongarch: : . : Merge the long awaited IRQ support for the LoongArch architecture. : : From the cover letter: : : "Currently, LoongArch based processors (e.g. Loongson-3A5000) : can only work together with LS7A chipsets. The irq chips in : LoongArch computers include CPUINTC (CPU Core Interrupt : Controller), LIOINTC (Legacy I/O Interrupt Controller), : EIOINTC (Extended I/O Interrupt Controller), PCH-PIC (Main : Interrupt Controller in LS7A chipset), PCH-LPC (LPC Interrupt : Controller in LS7A chipset) and PCH-MSI (MSI Interrupt Controller)." : : Note that this comes with non-official, arch private ACPICA : definitions until the official ACPICA update is realeased. : . irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch irqchip: Add LoongArch CPU interrupt controller support irqchip: Add Loongson Extended I/O interrupt controller support irqchip/loongson-liointc: Add ACPI init support irqchip/loongson-pch-msi: Add ACPI init support irqchip/loongson-pch-pic: Add ACPI init support irqchip: Add Loongson PCH LPC controller support LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain LoongArch: Use ACPI_GENERIC_GSI for gsi handling genirq/generic_chip: Export irq_unmap_generic_chip ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback APCI: irq: Add support for multiple GSI domains LoongArch: Provisionally add ACPICA data structures Signed-off-by:Marc Zyngier <maz@kernel.org>
-
Jianmin Lv authored
For LoongArch, ACPI_IRQ_MODEL_LPIC is introduced, and then the callback acpi_get_gsi_domain_id and acpi_gsi_to_irq_fallback are implemented. The acpi_get_gsi_domain_id callback returns related fwnode handle of irqdomain for different GSI range. The acpi_gsi_to_irq_fallback will create new mapping for gsi when the mapping of it is not found. Signed-off-by:
Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by:
-
Huacai Chen authored
LoongArch CPUINTC stands for CSR.ECFG/CSR.ESTAT and related interrupt controller that described in Section 7.4 of "LoongArch Reference Manual, Vol 1". For more information please refer Documentation/loongarch/irq- chip-model.rst. LoongArch CPUINTC has 13 interrupt sources: SWI0~1, HWI0~7, IPI, TI (Timer) and PCOV (PMC). IRQ mappings of HWI0~7 are configurable (can be created from DT/ACPI), but IPI, TI (Timer) and PCOV (PMC) are hardcoded bits, so we expose the fwnode_handle to map them, and get mapped irq by irq_create_mapping when using them. Co-developed-by:
Huacai Chen <chenhuacai@loongson.cn> Signed-off-by:
-
Huacai Chen authored
EIOINTC stands for "Extended I/O Interrupts" that described in Section 11.2 of "Loongson 3A5000 Processor Reference Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Loongson-3A5000 has 4 cores per NUMA node, and each NUMA node has an EIOINTC; while Loongson-3C5000 has 16 cores per NUMA node, and each NUMA node has 4 EIOINTCs. In other words, 16 cores of one NUMA node in Loongson-3C5000 are organized in 4 groups, each group connects to an EIOINTC. We call the "group" here as an EIOINTC node, so each EIOINTC node always includes 4 cores (both in Loongson-3A5000 and Loongson- 3C5000). Co-developed-by:
-
Huacai Chen authored
LIOINTC stands for "Legacy I/O Interrupts" that described in Section 11.1 of "Loongson 3A5000 Processor Reference Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Co-developed-by:
-
Huacai Chen authored
PCH-PIC/PCH-MSI stands for "Interrupt Controller" that described in Section 5 of "Loongson 7A1000 Bridge User Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Co-developed-by:
-
Huacai Chen authored
PCH-PIC/PCH-MSI stands for "Interrupt Controller" that described in Section 5 of "Loongson 7A1000 Bridge User Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Co-developed-by:
-
Huacai Chen authored
PCH-LPC stands for "LPC Interrupts" that described in Section 24.3 of "Loongson 7A1000 Bridge User Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Co-developed-by:
-
Jianmin Lv authored
For systems with two chipsets, there are two related pch-pic and pch-msi irqdomains, each of which has the same node id as its parent irqdomain. So we use a structure to mantain the relation of node and it's parent irqdomain as pch irqdomin, the 'pci_segment' field is only used to match the pci segment of a pci device when setting msi irqdomain for the device. struct acpi_vector_group { int node; int pci_segment; struct irq_domain *parent; }; The field 'pci_segment' and 'node' are initialized from MCFG, and the parent irqdomain driver will set field 'parent' by matching same 'node'. Signed-off-by: -
Jianmin Lv authored
For LoongArch, generic gsi code(driver/acpi/irq.c) can be reused after following patchs: APCI: irq: Add support for multiple GSI domains ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback So, config ACPI_GENERIC_GSI for LoongArch with removing the gsi code in arch directory. Signed-off-by:
-
Jianmin Lv authored
Some irq controllers have to re-implement a private version for irq_generic_chip_ops, because they have a different xlate to translate hwirq. Export irq_unmap_generic_chip to allow reusing in drivers. Signed-off-by:
-
Marc Zyngier authored
It appears that the generic version of acpi_gsi_to_irq() doesn't fallback to establishing a mapping if there is no pre-existing one while the x86 version does. While arm64 seems unaffected by it, LoongArch is relying on the x86 behaviour. In an effort to prevent new architectures from reinventing the proverbial wheel, provide an optional callback that the arch code can set to restore the x86 behaviour. Hopefully we can eventually get rid of this in the future once the expected behaviour has been clarified. Reported-by:
Hanjun Guo <guohanjun@huawei.com> Reviewed-by:
-
Marc Zyngier authored
In an unfortunate departure from the ACPI spec, the LoongArch architecture split its GSI space across multiple interrupt controllers. In order to be able to reuse the core code and prevent architectures from reinventing an already square wheel, offer the arch code the ability to register a dispatcher function that will return the domain fwnode for a given GSI. The ARM GIC drivers are updated to support this (with a single domain, as intended). Signed-off-by:
-
Marc Zyngier authored
The LoongArch architecture is using ACPI, but the spec containing the required updates still is in an unreleased state. Instead of preventing the inclusion of the IRQ support into the kernel, add the missing bits to the arch-specific parts of the ACPICA support. Once the ACPICA bits are updated to the version that supports LoongArch, these bits can eventually be removed. Signed-off-by:
-
- 19 Jul, 2022 2 commits
-
-
Marc Zyngier authored
* irq/renesas-irqc: : . : New Renesas RZ/G2L IRQC driver from Lad Prabhakar, equipped with : its companion GPIO driver. : . dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC gpio: thunderx: Don't directly include asm-generic/msi.h pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to handle GPIO interrupt dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Document the properties to handle GPIO IRQ gpio: gpiolib: Allow free() callback to be overridden irqchip: Add RZ/G2L IA55 Interrupt Controller driver dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller gpio: Remove dynamic allocation from populate_parent_alloc_arg() Signed-off-by: -
Lad Prabhakar authored
Document RZ/V2L (R9A07G054) IRQC bindings. The RZ/V2L IRQC block is identical to one found on the RZ/G2L SoC. No driver changes are required as generic compatible string "renesas,rzg2l-irqc" will be used as a fallback. While at it, update the comment "# RZ/G2L" to "# RZ/G2{L,LC}" for "renesas,r9a07g044-irqc" compatible string as both RZ/G2L and RZ/G2LC SoC's use the common SoC DTSI and have the same IRQC block. Signed-off-by:Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by:
-
- 11 Jul, 2022 1 commit
-
-
Marc Zyngier authored
On architectures that require it, asm-generic/msi.h is already dragged in by the higher level include files, and is commonly refered to as 'asm/msi.h'. It is also architecture specific, and breaks compilation in a pretty bad way now that linux/gpio/driver.h includes asm/msi.h (which drags a conflicting but nonetheless correct version of msi_alloc_info_t on x86). Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 10 Jul, 2022 11 commits
-
-
Marc Zyngier authored
* irq/plic-masking: : . : SiFive PLIC optimisations from Samuel Holland: : : "This series removes the spinlocks and cpumask operations from the PLIC : driver's hot path. As far as I know, using the priority to mask : interrupts is an intended usage and will work on all existing : implementations. [...]" : . irqchip/sifive-plic: Separate the enable and mask operations irqchip/sifive-plic: Make better use of the effective affinity mask PCI: hv: Take a const cpumask in hv_compose_msi_req_get_cpu() genirq: Provide an IRQ affinity mask in non-SMP configs genirq: Return a const cpumask from irq_data_get_affinity_mask genirq: Add and use an irq_data_update_affinity helper genirq: Refactor accessors to use irq_data_get_affinity_mask genirq: Drop redundant irq_init_effective_affinity genirq: GENERIC_IRQ_EFFECTIVE_AFF_MASK depends on SMP genirq: GENERIC_IRQ_IPI depends on SMP irqchip/mips-gic: Only register IPI domain when SMP is enabled Signed-off-by: -
Samuel Holland authored
The PLIC has two per-IRQ checks before sending an IRQ to a hart context. First, it checks that the IRQ's priority is nonzero. Then, it checks that the enable bit is set for that combination of IRQ and context. Currently, the PLIC driver sets both the priority value and the enable bit in its (un)mask operations. However, modifying the enable bit is problematic for two reasons: 1) The enable bits are packed, so changes are not atomic and require taking a spinlock. 2) The following requirement from the PLIC spec, which explains the racy (un)mask operations in plic_irq_eoi(): If the completion ID does not match an interrupt source that is currently enabled for the target, the completion is silently ignored. Both of these problems are solved by using the priority value to mask IRQs. Each IRQ has a separate priority register, so writing the priority value is atomic. And since the enable bit remains set while an IRQ is masked, the EOI operation works normally. The enable bits are still used to control the IRQ's affinity. Signed-off-by:Samuel Holland <samuel@sholland.org> Signed-off-by:
-
Samuel Holland authored
The PLIC driver already updates the effective affinity mask in its .irq_set_affinity callback. Take advantage of that information to only touch bits (and take spinlocks) for the specific relevant hart contexts. First, make sure the effective affinity mask is set before IRQ startup. Then, since this mask already takes priv->lmask into account, checking that mask later is no longer needed (and handler->present is equivalent to the bit being set in priv->lmask). Finally, when (un)masking or changing affinity, only clear/set the enable bits in the specific old/new context(s). The cpumask operations in plic_irq_unmask() are not needed because they duplicate the code in plic_set_affinity(). Signed-off-by:
-
Marc Zyngier authored
* irq/affinity-nosmp: : . : non-SMP IRQ affinity fixes courtesy of Samuel Holland: : : "This series solves some inconsistency with how IRQ affinity masks are : handled between SMP and non-SMP configurations. : : In non-SMP configs, an IRQ's true affinity is always cpumask_of(0), so : irq_{,data_}get_affinity_mask now return that, instead of returning an : uninitialized per-IRQ cpumask. This change makes iterating over the : affinity mask do the right thing in both SMP and non-SMP configurations. : : To accomplish that: : - patches 1-3 disable some library code that was broken anyway on !SMP : - patches 4-7 refactor the code so that irq_{,data_}get_affinity_mask : can return a const cpumask, since that is what cpumask_of provides : - patch 8 drops the per-IRQ cpumask and replaces it with cpumask_of(0)" : . PCI: hv: Take a const cpumask in hv_compose_msi_req_get_cpu() genirq: Provide an IRQ affinity mask in non-SMP configs genirq: Return a const cpumask from irq_data_get_affinity_mask genirq: Add and use an irq_data_update_affinity helper genirq: Refactor accessors to use irq_data_get_affinity_mask genirq: Drop redundant irq_init_effective_affinity genirq: GENERIC_IRQ_EFFECTIVE_AFF_MASK depends on SMP genirq: GENERIC_IRQ_IPI depends on SMP irqchip/mips-gic: Only register IPI domain when SMP is enabled Signed-off-by: -
Marc Zyngier authored
* irq/stm32-exti-updates: : . : stm32-exti updates courtesy of Antonio Borneo: : : "This series address some code fix for irq-stm32-exti driver and : simplifies the table that remaps the interrupts from exti to gic." : : Also comes with an additional change to irq_chip_request_resources_parent(), : making it possible to omit the callback in hierarchies. : . irqchip/stm32-exti: Simplify irq description table irqchip/stm32-exti: Read event trigger type from event_trg register irqchip/stm32-exti: Tag emr register as undefined for stm32mp15 irqchip/stm32-exti: Prevent illegal read due to unbounded DT value irqchip/stm32-exti: Fix irq_mask/irq_unmask for direct events irqchip/stm32-exti: Fix irq_set_affinity return value genirq: Don't return error on missing optional irq_request_resources() Signed-off-by: -
Lad Prabhakar authored
Add IRQ domain to RZ/G2L pinctrl driver to handle GPIO interrupt. GPIO0-GPIO122 pins can be used as IRQ lines but only 32 pins can be used as IRQ lines at a given time. Selection of pins as IRQ lines is handled by IA55 (which is the IRQC block) which sits in between the GPIO and GIC. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Lad Prabhakar authored
Document the required properties to handle GPIO IRQ. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Lad Prabhakar authored
Allow free() callback to be overridden from irq_domain_ops for hierarchical chips. This allows drivers to free up resources which are allocated during child_to_parent_hwirq()/populate_parent_alloc_arg() callbacks. On Renesas RZ/G2L platform a bitmap is maintained for TINT slots, a slot is allocated in child_to_parent_hwirq() callback which is freed up in free callback hence this override. Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
-
Lad Prabhakar authored
Add a driver for the Renesas RZ/G2L Interrupt Controller. This supports external pins being used as interrupts. It supports one line for NMI, 8 external pins and 32 GPIO pins (out of 123) to be used as IRQ lines. Signed-off-by:
-
Lad Prabhakar authored
Add DT bindings for the Renesas RZ/G2L Interrupt Controller. Signed-off-by:
-
Marc Zyngier authored
The gpiolib is unique in the way it uses intermediate fwspecs when feeding an interrupt specifier to the parent domain, as it relies on the populate_parent_alloc_arg() callback to perform a dynamic allocation. This is pretty inefficient (we free the structure almost immediately), and the only reason this isn't a stack allocation is that our ThunderX friend uses MSIs rather than a FW-constructed structure. Let's solve it by providing a new type composed of the union of a struct irq_fwspec and a msi_info_t, which satisfies both requirements. This allows us to use a stack allocation, and we can move the handful of users to this new scheme. Also perform some additional cleanup, such as getting rid of the stub versions of the irq_domain_translate_*cell helpers, which are never used when CONFIG_IRQ_DOMAIN_HIERARCHY isn't selected. Tested on a Tegra186. Reviewed-by:
-
- 08 Jul, 2022 1 commit
-
-
Samuel Holland authored
The cpumask that is passed to this function ultimately comes from irq_data_get_effective_affinity_mask(), which was recently changed to return a const cpumask pointer. The first level of functions handling the affinity mask were updated, but not this helper function. Fixes: 4d0b8298 ("genirq: Return a const cpumask from irq_data_get_affinity_mask") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
-
- 07 Jul, 2022 11 commits
-
-
Samuel Holland authored
IRQ affinity masks are not allocated in uniprocessor configurations. This requires special case non-SMP code in drivers for irqchips which have per-CPU enable or mask registers. Since IRQ affinity is always the same in a uniprocessor configuration, we can provide a correct affinity mask without allocating one per IRQ. By returning a real cpumask from irq_data_get_affinity_mask even when SMP is disabled, irqchip drivers which iterate over that mask will automatically do the right thing. Signed-off-by:
-
Samuel Holland authored
Now that the irq_data_update_affinity helper exists, enforce its use by returning a a const cpumask from irq_data_get_affinity_mask. Since the previous commit already updated places that needed to call irq_data_update_affinity, this commit updates the remaining code that either did not modify the cpumask or immediately passed the modified mask to irq_set_affinity. Signed-off-by:
-
Samuel Holland authored
Some architectures and irqchip drivers modify the cpumask returned by irq_data_get_affinity_mask, usually by copying in to it. This is problematic for uniprocessor configurations, where the affinity mask should be constant, as it is known at compile time. Add and use a setter for the affinity mask, following the pattern of irq_data_update_effective_affinity. This allows the getter function to return a const cpumask pointer. Signed-off-by:
-
Samuel Holland authored
A couple of functions directly reference the affinity mask. Route them through irq_data_get_affinity_mask so they will pick up any refactoring done there. Signed-off-by:
-
Samuel Holland authored
It does exactly the same thing as irq_data_update_effective_affinity. Signed-off-by:
-
Samuel Holland authored
An IRQ's effective affinity can only be different from its configured affinity if there are multiple CPUs. Make it clear that this option is only meaningful when SMP is enabled. Most of the relevant code in irqdesc.c is already hidden behind CONFIG_SMP anyway. Signed-off-by:
-
Samuel Holland authored
The generic IPI code depends on the IRQ affinity mask being allocated and initialized. This will not be the case if SMP is disabled. Fix up the remaining driver that selected GENERIC_IRQ_IPI in a non-SMP config. Reported-by:
-
Samuel Holland authored
The MIPS GIC irqchip driver may be selected in a uniprocessor configuration, but it unconditionally registers an IPI domain. Limit the part of the driver dealing with IPIs to only be compiled when GENERIC_IRQ_IPI is enabled, which corresponds to an SMP configuration. Reported-by:
-
Antonio Borneo authored
Having removed the event trigger type from struct stm32_desc_irq makes worthless keep using a struct. Replace the struct by a single dimension array and use 8 bit type to reduce the overal memory footprint. On armv7a this patch reduces by 7% the size of the driver, from text data bss dec hex filename 6977 424 4 7405 1ced irq-stm32-exti.o to 6449 424 4 6877 1add irq-stm32-exti.o Signed-off-by:
Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by:
-
Antonio Borneo authored
The flag reporting whether an event is 'direct' or 'configurable' is available in the read-only registers EVENT_TRG. Drop this redundant information from the struct stm32_desc_irq and use the proper bit from EVENT_TRG register. On armv7a this patch reduces by 3% the size of the driver, from text data bss dec hex filename 7233 424 4 7661 1ded irq-stm32-exti.o to 6977 424 4 7405 1ced irq-stm32-exti.o Signed-off-by:
-
Alexandre Torgue authored
The reference manual RM0436 of stm32mp15 till version v4.0 was erroneously reporting the Event Mask Registers (EMR) for the Cortex-A CPUs. These registers have been removed from v5.0 of the manual and the corresponding offsets have been marked as 'Reserved'. Prevent accessing these reserved addresses by tagging the EMR offsets as UNDEF_REG and modifying the code to handle this case. Signed-off-by:
Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by:
-
