Skip to content

L
linux
Switch branch/tag
  1. 05 Feb, 2016 3 commits
    • Martin K. Petersen's avatar
      block/sd: Return -EREMOTEIO when WRITE SAME and DISCARD are disabled · 0fb5b1fb
      Martin K. Petersen authored 
      When a storage device rejects a WRITE SAME command we will disable write
same functionality for the device and return -EREMOTEIO to the block
layer. -EREMOTEIO will in turn prevent DM from retrying the I/O and/or
failing the path.

Yiwen Jiang discovered a small race where WRITE SAME requests issued
simultaneously would cause -EIO to be returned. This happened because
any requests being prepared after WRITE SAME had been disabled for the
device caused us to return BLKPREP_KILL. The latter caused the block
layer to return -EIO upon completion.

To overcome this we introduce BLKPREP_INVALID which indicates that this
is an invalid request for the device. blk_peek_request() is modified to
return -EREMOTEIO in that case.
Reported-by: default avatarYiwen Jiang <jiangyiwen@huawei.com>
Suggested-by: default avatarMike Snitzer <snitzer@redhat.com>
Reviewed-by: default avatarHannes Reinicke <hare@suse.de>
Reviewed-by: default avatarEwan Milne <emilne@redhat.com>
Reviewed-by: default avatarYiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      0fb5b1fb
    • Mika Westerberg's avatar
      SCSI: Add Marvell Console to VPD blacklist · 82c43310
      Mika Westerberg authored 
      I have a Marvell 88SE9230 SATA Controller that has some sort of
integrated console SCSI device attached to one of the ports.

  ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
  ata14.00: configured for UDMA/66
  scsi 13:0:0:0: Processor         Marvell  Console 1.01 PQ: 0 ANSI: 5

Sending it VPD INQUIRY command seem to always fail with following error:

  ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
  ata14.00: irq_stat 0x40000001
  ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in
            Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
  ata14: hard resetting link

This has been minor annoyance (only error printed on dmesg) until commit
09e2b0b1 ("scsi: rescan VPD attributes") added call to scsi_attach_vpd()
in scsi_rescan_device(). The commit causes the system to splat out
following errors continuously without ever reaching the UI:

  ata14.00: configured for UDMA/66
  ata14: EH complete
  ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
  ata14.00: irq_stat 0x40000001
  ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 6 dma 16640 in
            Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
  ata14: hard resetting link
  ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  ata14.00: configured for UDMA/66
  ata14: EH complete
  ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
  ata14.00: irq_stat 0x40000001
  ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 7 dma 16640 in
            Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)

Without in-depth understanding of SCSI layer and the Marvell controller,
I suspect this happens because when the link goes down (because of an
error) we schedule scsi_rescan_device() which again fails to read VPD
data... ad infinitum.

Since VPD data cannot be read from the device anyway we prevent the SCSI
layer from even trying by blacklisting the device. This gets away the
error and the system starts up normally.

[mkp: Widened the match to all revisions of this device]

Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: default avatarAlexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      82c43310
    • Hannes Reinecke's avatar
      scsi_dh_rdac: always retry MODE SELECT on command lock violation · d2d06d4f
      Hannes Reinecke authored 
      If MODE SELECT returns with sense '05/91/36' (command lock violation)
it should always be retried without counting the number of retries.
During an HBA upgrade or similar circumstances one might see a flood
of MODE SELECT command from various HBAs, which will easily trigger
the sense code and exceed the retry count.

Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarHannes Reinecke <hare@suse.de>
Reviewed-by: default avatarJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      d2d06d4f
  3. 29 Jan, 2016 2 commits
  5. 27 Jan, 2016 2 commits
  7. 21 Jan, 2016 3 commits
  9. 20 Jan, 2016 24 commits
  11. 19 Jan, 2016 6 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7