- 05 Aug, 2021 2 commits
-
-
Alex Elder authored
Three interconnects are defined for IPA version 4.9, but there should only be two. They should also use names that match what's used for other platforms (and specified in the Device Tree binding). Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The pointer hdr is being initialized and also re-assigned with the same value from the call to function mctp_hdr. Static analysis reports that the initializated value is unused. The second assignment is duplicated and can be removed. Addresses-Coverity: ("Unused value"). Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 04 Aug, 2021 38 commits
-
-
Sebastian Andrzej Siewior authored
The functions get_online_cpus() and put_online_cpus() have been deprecated during the CPU hotplug rework. They map directly to cpus_read_lock() and cpus_read_unlock(). Replace deprecated CPU-hotplug functions with the official version. The behavior remains unchanged. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Sebastian Andrzej Siewior authored
The functions get_online_cpus() and put_online_cpus() have been deprecated during the CPU hotplug rework. They map directly to cpus_read_lock() and cpus_read_unlock(). Replace deprecated CPU-hotplug functions with the official version. The behavior remains unchanged. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by:
-
Nick Richardson authored
When the netif_receive xmit_mode is set, a line is supposed to set clone_skb to a default 0 value. This line is made redundant due to a preceding line that checks if clone_skb is more than zero and returns -ENOTSUPP. Overriding clone_skb to 0 does not make any difference to the behavior because if it was positive we return error. So it can be either 0 or negative, and in both cases the behavior is the same. Remove redundant line that sets clone_skb to zero. Signed-off-by:
Nick Richardson <richardsonnick@google.com> Signed-off-by:
-
Jonathan Lemon authored
The OpenCompute timecard driver has additional functionality besides a clock. Make the following resources available: - The external timestamp channels (ts0/ts1) - devlink support for flashing and health reporting - GPS and MAC serial ports - board serial number (obtained from i2c device) Also add watchdog functionality for when GNSS goes into holdover. The resources are collected under a timecard class directory: [jlemon@timecard ~]$ ls -g /sys/class/timecard/ocp1/ total 0 -r--r--r--. 1 root 4096 Aug 3 19:49 available_clock_sources -rw-r--r--. 1 root 4096 Aug 3 19:49 clock_source lrwxrwxrwx. 1 root 0 Aug 3 19:49 device -> ../../../0000:04:00.0/ -r--r--r--. 1 root 4096 Aug 3 19:49 gps_sync lrwxrwxrwx. 1 root 0 Aug 3 19:49 i2c -> ../../xiic-i2c.1024/i2c-2/ drwxr-xr-x. 2 root 0 Aug 3 19:49 power/ lrwxrwxrwx. 1 root 0 Aug 3 19:49 pps -> ../../../../../virtual/pps/pps1/ lrwxrwxrwx. 1 root 0 Aug 3 19:49 ptp -> ../../ptp/ptp2/ -r--r--r--. 1 root 4096 Aug 3 19:49 serialnum lrwxrwxrwx. 1 root 0 Aug 3 19:49 subsystem -> ../../../../../../class/timecard/ lrwxrwxrwx. 1 root 0 Aug 3 19:49 ttyGPS -> ../../tty/ttyS7/ lrwxrwxrwx. 1 root 0 Aug 3 19:49 ttyMAC -> ../../tty/ttyS8/ -rw-r--r--. 1 root 4096 Aug 3 19:39 uevent The labeling is needed at the minimum, in order to tell the serial devices apart. Signed-off-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by:
-
Pavel Tikhomirov authored
SOCK_SNDBUF_LOCK and SOCK_RCVBUF_LOCK flags disable automatic socket buffers adjustment done by kernel (see tcp_fixup_rcvbuf() and tcp_sndbuf_expand()). If we've just created a new socket this adjustment is enabled on it, but if one changes the socket buffer size by setsockopt(SO_{SND,RCV}BUF*) it becomes disabled. CRIU needs to call setsockopt(SO_{SND,RCV}BUF*) on each socket on restore as it first needs to increase buffer sizes for packet queues restore and second it needs to restore back original buffer sizes. So after CRIU restore all sockets become non-auto-adjustable, which can decrease network performance of restored applications significantly. CRIU need to be able to restore sockets with enabled/disabled adjustment to the same state it was before dump, so let's add special setsockopt for it. Let's also export SOCK_SNDBUF_LOCK and SOCK_RCVBUF_LOCK flags to uAPI so that using these interface one can reenable automatic socket buffer adjustment on their sockets. Signed-off-by:Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Peilin Ye authored
Recently we added multi-queue support to netdevsim in commit d4861fc6 ("netdevsim: Add multi-queue support"); add a few control-plane selftests for sch_mq using this new feature. Use nsPlugin.py to avoid network interface name collisions. Reviewed-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
Peilin Ye <peilin.ye@bytedance.com> Signed-off-by:
-
Vladimir Oltean authored
This reverts commit b0e81817. Explicit driver dependency on the bridge is no longer needed since switchdev_bridge_port_{,un}offload() is no longer implemented by the bridge driver but by switchdev. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Vladimir Oltean authored
With the introduction of explicit offloading API in switchdev in commit 2f5dc00f ("net: bridge: switchdev: let drivers inform which bridge ports are offloaded"), we started having Ethernet switch drivers calling directly into a function exported by net/bridge/br_switchdev.c, which is a function exported by the bridge driver. This means that drivers that did not have an explicit dependency on the bridge before, like cpsw and am65-cpsw, now do - otherwise it is not possible to call a symbol exported by a driver that can be built as module unless you are a module too. There was an attempt to solve the dependency issue in the form of commit b0e81817 ("net: build all switchdev drivers as modules when the bridge is a module"). Grygorii Strashko, however, says about it: | In my opinion, the problem is a bit bigger here than just fixing the | build :( | | In case, of ^cpsw the switchdev mode is kinda optional and in many | cases (especially for testing purposes, NFS) the multi-mac mode is | still preferable mode. | | There were no such tight dependency between switchdev drivers and | bridge core before and switchdev serviced as independent, notification | based layer between them, so ^cpsw still can be "Y" and bridge can be | "M". Now for mostly every kernel build configuration the CONFIG_BRIDGE | will need to be set as "Y", or we will have to update drivers to | support build with BRIDGE=n and maintain separate builds for | networking vs non-networking testing. But is this enough? Wouldn't | it cause 'chain reaction' required to add more and more "Y" options | (like CONFIG_VLAN_8021Q)? | | PS. Just to be sure we on the same page - ARM builds will be forced | (with this patch) to have CONFIG_TI_CPSW_SWITCHDEV=m and so all our | automation testing will just fail with omap2plus_defconfig. In the light of this, it would be desirable for some configurations to avoid dependencies between switchdev drivers and the bridge, and have the switchdev mode as completely optional within the driver. Arnd Bergmann also tried to write a patch which better expressed the build time dependency for Ethernet switch drivers where the switchdev support is optional, like cpsw/am65-cpsw, and this made the drivers follow the bridge (compile as module if the bridge is a module) only if the optional switchdev support in the driver was enabled in the first place: https://patchwork.kernel.org/project/netdevbpf/patch/20210802144813.1152762-1-arnd@kernel.org/ but this still did not solve the fact that cpsw and am65-cpsw now must be built as modules when the bridge is a module - it just expressed correctly that optional dependency. But the new behavior is an apparent regression from Grygorii's perspective. So to support the use case where the Ethernet driver is built-in, NET_SWITCHDEV (a bool option) is enabled, and the bridge is a module, we need a framework that can handle the possible absence of the bridge from the running system, i.e. runtime bloatware as opposed to build-time bloatware. Luckily we already have this framework, since switchdev has been using it extensively. Events from the bridge side are transmitted to the driver side using notifier chains - this was originally done so that unrelated drivers could snoop for events emitted by the bridge towards ports that are implemented by other drivers (think of a switch driver with LAG offload that listens for switchdev events on a bonding/team interface that it offloads). There are also events which are transmitted from the driver side to the bridge side, which again are modeled using notifiers. SWITCHDEV_FDB_ADD_TO_BRIDGE is an example of this, and deals with notifying the bridge that a MAC address has been dynamically learned. So there is a precedent we can use for modeling the new framework. The difference compared to SWITCHDEV_FDB_ADD_TO_BRIDGE is that the work that the bridge needs to do when a port becomes offloaded is blocking in its nature: replay VLANs, MDBs etc. The calling context is indeed blocking (we are under rtnl_mutex), but the existing switchdev notification chain that the bridge is subscribed to is only the atomic one. So we need to subscribe the bridge to the blocking switchdev notification chain too. This patch: - keeps the driver-side perception of the switchdev_bridge_port_{,un}offload unchanged - moves the implementation of switchdev_bridge_port_{,un}offload from the bridge module into the switchdev module. - makes everybody that is subscribed to the switchdev blocking notifier chain "hear" offload & unoffload events - makes the bridge driver subscribe and handle those events - moves the bridge driver's handling of those events into 2 new functions called br_switchdev_port_{,un}offload. These functions contain in fact the core of the logic that was previously in switchdev_bridge_port_{,un}offload, just that now we go through an extra indirection layer to reach them. Unlike all the other switchdev notification structures, the structure used to carry the bridge port information, struct switchdev_notifier_brport_info, does not contain a "bool handled". This is because in the current usage pattern, we always know that a switchdev bridge port offloading event will be handled by the bridge, because the switchdev_bridge_port_offload() call was initiated by a NETDEV_CHANGEUPPER event in the first place, where info->upper_dev is a bridge. So if the bridge wasn't loaded, then the CHANGEUPPER event couldn't have happened. Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-next-for-5.15-20210804' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2021-08-04 this is a pull request of 5 patches for net-next/master. The first patch is by me and fixes a typo in a comment in the CAN J1939 protocol. The next 2 patches are by Oleksij Rempel and update the CAN J1939 protocol to send RX status updates via the error queue mechanism. The next patch is by me and adds a missing variable initialization to the flexcan driver (the problem was introduced in the current net-next cycle). The last patch is by Aswath Govindraju and adds power-domains to the Bosch m_can DT binding documentation. ==================== Signed-off-by:
-
Aswath Govindraju authored
Document power-domains property for adding the Power domain provider. Link: https://lore.kernel.org/r/20210802091822.16407-1-a-govindraju@ti.comSigned-off-by:
Aswath Govindraju <a-govindraju@ti.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
This patch adds the missing initialization of the "err" variable in the flexcan_clks_enable() function. Fixes: d9cead75 ("can: flexcan: add mcf5441x support") Link: https://lore.kernel.org/r/20210728075428.1493568-1-mkl@pengutronix.deReported-by:
kernel test robot <lkp@intel.com> Cc: Angelo Dureghello <angelo@kernel-space.org> Signed-off-by:
-
Oleksij Rempel authored
To be able to create applications with user friendly feedback, we need be able to provide receive status information. Typical ETP transfer may take seconds or even hours. To give user some clue or show a progress bar, the stack should push status updates. Same as for the TX information, the socket error queue will be used with following new signals: - J1939_EE_INFO_RX_RTS - received and accepted request to send signal. - J1939_EE_INFO_RX_DPO - received data package offset signal - J1939_EE_INFO_RX_ABORT - RX session was aborted Instead of completion signal, user will get data package. To activate this signals, application should set SOF_TIMESTAMPING_RX_SOFTWARE to the SO_TIMESTAMPING socket option. This will avoid unpredictable application behavior for the old software. Link: https://lore.kernel.org/r/20210707094854.30781-3-o.rempel@pengutronix.deSigned-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Oleksij Rempel authored
Prepare the world for the J1939_ERRQUEUE_RX_ version Link: https://lore.kernel.org/r/20210707094854.30781-2-o.rempel@pengutronix.deSigned-off-by:
-
Eric Dumazet authored
As presented last month in our "BIG TCP" talk at netdev 0x15, we plan using IPv6 jumbograms. One of the minor problem we talked about is the fact that ip6_parse_tlv() is currently using tables to list known tlvs, thus using potentially expensive indirect calls. While we could mitigate this cost using macros from indirect_call_wrapper.h, we also can get rid of the tables and let the compiler emit optimized code. Signed-off-by:
-
David S. Miller authored
DENG Qingfang says: ==================== mt7530 software fallback bridging fix DSA core has gained software fallback support since commit 2f5dc00f, but it does not work properly on mt7530. This patch series fixes the issues. ==================== Signed-off-by:
-
DENG Qingfang authored
This reverts commit 7e777021 ("mt7530 mt7530_fdb_write only set ivl bit vid larger than 1"). Before this series, the default value of all ports' PVID is 1, which is copied into the FDB entry, even if the ports are VLAN unaware. So `bridge fdb show` will show entries like `dev swp0 vlan 1 self` even on a VLAN-unaware bridge. The blamed commit does not solve that issue completely, instead it may cause a new issue that FDB is inaccessible in a VLAN-aware bridge with PVID 1. This series sets PVID to 0 on VLAN-unaware ports, so `bridge fdb show` will no longer print `vlan 1` on VLAN-unaware bridges, and that special case in fdb_write is not required anymore. Set FDB entries' filter ID to 1 to match the VLAN table. Signed-off-by:
DENG Qingfang <dqfext@gmail.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
DENG Qingfang authored
As filter ID 1 is the only one used for bridges, set STP state on it. Signed-off-by:
-
DENG Qingfang authored
Consider the following bridge configuration, where bond0 is not offloaded: +-- br0 --+ / / | \ / / | \ / | | bond0 / | | / \ swp0 swp1 swp2 swp3 swp4 . . . . . . A B C Ideally, when the switch receives a packet from swp3 or swp4, it should forward the packet to the CPU, according to the port matrix and unknown unicast flood settings. But packet loss will happen if the destination address is at one of the offloaded ports (swp0~2). For example, when client C sends a packet to A, the FDB lookup will indicate that it should be forwarded to swp0, but the port matrix of swp3 and swp4 is configured to only allow the CPU to be its destination, so it is dropped. However, this issue does not happen if the bridge is VLAN-aware. That is because VLAN-aware bridges use independent VLAN learning, i.e. use VID for FDB lookup, on offloaded ports. As swp3 and swp4 are not offloaded, shared VLAN learning with default filter ID of 0 is used instead. So the lookup for A with filter ID 0 never hits and the packet can be forwarded to the CPU. In the current code, only two combinations were used to toggle user ports' VLAN awareness: one is PCR.PORT_VLAN set to port matrix mode with PVC.VLAN_ATTR set to transparent port, the other is PCR.PORT_VLAN set to security mode with PVC.VLAN_ATTR set to user port. It turns out that only PVC.VLAN_ATTR contributes to VLAN awareness, and port matrix mode just skips the VLAN table lookup. The reference manual is somehow misleading when describing PORT_VLAN modes. It states that PORT_MEM (VLAN port member) is used for destination if the VLAN table lookup hits, but actually **PORT_MEM & PORT_MATRIX** (bitwise AND of VLAN port member and port matrix) is used instead, which means we can have two or more separate VLAN-aware bridges with the same PVID and traffic won't leak between them. Therefore, to solve this, enable independent VLAN learning with PVID 0 on VLAN-unaware bridges, by setting their PCR.PORT_VLAN to fallback mode, while leaving standalone ports in port matrix mode. The CPU port is always set to fallback mode to serve those bridges. During testing, it is found that FDB lookup with filter ID of 0 will also hit entries with VID 0 even with independent VLAN learning. To avoid that, install all VLANs with filter ID of 1. Signed-off-by: -
DENG Qingfang authored
Consider the following bridge configuration, where bond0 is not offloaded: +-- br0 --+ / / | \ / / | \ / | | bond0 / | | / \ swp0 swp1 swp2 swp3 swp4 . . . . . . A B C Address learning is enabled on offloaded ports (swp0~2) and the CPU port, so when client A sends a packet to C, the following will happen: 1. The switch learns that client A can be reached at swp0. 2. The switch probably already knows that client C can be reached at the CPU port, so it forwards the packet to the CPU. 3. The bridge core knows client C can be reached at bond0, so it forwards the packet back to the switch. 4. The switch learns that client A can be reached at the CPU port. 5. The switch forwards the packet to either swp3 or swp4, according to the packet's tag. That makes client A's MAC address flap between swp0 and the CPU port. If client B sends a packet to A, it is possible that the packet is forwarded to the CPU. With offload_fwd_mark = 1, the bridge core won't forward it back to the switch, resulting in packet loss. As we have the assisted_learning_on_cpu_port in DSA core now, enable that and disable hardware learning on the CPU port. Signed-off-by:Vladimir Oltean <oltean@gmail.com> Signed-off-by:
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: prepare GSI interrupts for runtime PM The last patch in this series arranges for GSI interrupts to be disabled when the IPA hardware is suspended. This ensures the clock is always operational when a GSI interrupt fires. Leading up to that are patches that rearrange the code a bit to allow this to be done. The first two patches aren't *directly* related. They remove some flag arguments to some GSI suspend/resume related functions, using the version field now present in the GSI structure. ==================== Signed-off-by: -
Alex Elder authored
Introduce new functions gsi_suspend() and gsi_resume(), which will disable the GSI interrupt handler after all endpoints are suspended and re-enable it before endpoints are resumed. This will ensure no GSI interrupt handler will fire when the hardware is suspended. Here's a little further explanation. There are seven GSI interrupt types, and most are disabled except when needed. - These two are not used (never enabled): GSI_INTER_EE_CH_CTRL GSI_INTER_EE_EV_CTRL - These two are only used to implement channel and event ring commands, and are only enabled while a command is underway: GSI_CH_CTRL GSI_EV_CTRL - The IEOB interrupt signals I/O completion. It will not fire when a channel is stopped (or "suspended"). GSI_IEOB - This interrupt is used to allocate or halt modem channels, and is only enabled while such a command is underway. GSI_GLOB_EE However it also is used to signal certain errors, and this could occur at any time. - The general interrupt signals general errors, and could occur at any time. GSI_GENERAL The purpose for this change is to ensure no global or general interrupts fire due to errors while the hardware is suspended. We enable the clock on resume, and at that time we can "handle" (at least report) these error conditions. Signed-off-by: -
Alex Elder authored
The GSI IRQ handler could be triggered as soon as it is registered with request_irq(). The handler function, gsi_isr(), touches hardware, meaning the IPA clock must be operational. The IPA clock is not operating when the handler is registered (in gsi_irq_init()), so this is a problem. Move the call to request_irq() for the GSI interrupt handler into gsi_irq_setup(), which is called when the IPA clock is known to be operational (and furthermore, the GSI firmware will have been loaded). Request the IRQ at the end of that function, after all interrupt types have been disabled and masked. Move the matching free_irq() call into gsi_irq_teardown(), and get rid of the now empty gsi_irq_exit(), Signed-off-by:
-
Alex Elder authored
Change gsi_irq_setup() so it returns an error value, and introduce gsi_irq_teardown() as its inverse. Set the interrupt type (IRQ rather than MSI) in gsi_irq_setup(). Signed-off-by:
-
Alex Elder authored
Move gsi_irq_setup() and gsi_ring_setup() so they're defined right above gsi_setup() where they're called. This is a trivial movement of code to prepare for upcoming patches. Signed-off-by:
-
Alex Elder authored
Change the Boolean flags passed to __gsi_channel_start() and __gsi_channel_stop() so they represent whether the request is being made to implement suspend (versus stop) or resume (versus start). Then stop or start the channel for suspend/resume requests only if the hardware version indicates it should be done. Signed-off-by:
-
Alex Elder authored
The GSI layer has the IPA version now, so there's no need for version-specific flags to be passed from IPA. One instance of this is in gsi_channel_suspend() and gsi_channel_resume(), which indicate whether or not the endpoint suspend is implemented by GSI stopping the channel. We can make that determination based on gsi->version, eliminating the need for a Boolean flag in those functions. Signed-off-by:
-
David S. Miller authored
Loic Poulain says: ==================== net: mhi: move MBIM to WWAN Implement a proper WWAN driver for MBIM network protocol, with multi link management supported through the WWAN framework (wwan rtnetlink). Until now, MBIM over MHI was supported directly in the mhi_net driver, via some protocol rx/tx fixup callbacks, but with only one session supported (no multilink muxing). We can then remove that part from mhi_net and restore the driver to a simpler version for 'raw' ip transfer (or QMAP via rmnet link). Note that a wwan0 link is created by default for session-id 0. Additional links can be managed via ip tool: $ ip link add dev wwan0mms parentdev wwan0 type wwan linkid 1 ==================== Signed-off-by: -
Loic Poulain authored
The MBIM protocol has now been integrated in a proper WWAN driver. We can then revert back to a simpler driver for mhi_net, which is used for raw IP or QMAP protocol (via rmnet link). - Remove protocol management - Remove WWAN framework usage (only valid for mbim) - Remove net/mhi directory for simpler mhi_net.c file Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
Loic Poulain authored
Add new wwan driver for MBIM over MHI. MBIM is a transport protocol for IP packets, allowing packet aggregation and muxing. Initially designed for USB bus, it is also exposed through MHI bus for QCOM based PCIe wwan modems. This driver supports the new wwan rtnetlink interface for multi-link management and has been tested with Quectel EM120R-GL M2 module. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== net: add netif_set_real_num_queues() for device reconfig This short set adds a helper to make the implementation of two-phase NIC reconfig easier. ==================== Signed-off-by: -
Jakub Kicinski authored
Avoid reconfig problems due to failures in netif_set_real_num_tx_queues() by using netif_set_real_num_queues(). Signed-off-by:
-
Jakub Kicinski authored
netif_set_real_num_rx_queues() and netif_set_real_num_tx_queues() can fail which breaks drivers trying to implement reconfiguration in a way that can't leave the device half-broken. In other words those functions are incompatible with prepare/commit approach. Luckily setting real number of queues can fail only if the number is increased, meaning that if we order operations correctly we can guarantee ending up with either new config (success), or the old one (on error). Provide a helper implementing such logic so that drivers don't have to duplicate it. Signed-off-by:
-
Rocco Yue authored
Pass extack arg to validate_linkmsg and validate_link_af callbacks. If a netlink attribute has a reject_message, use the extended ack mechanism to carry the message back to user space. Signed-off-by:
Rocco Yue <rocco.yue@mediatek.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Rao Shoaib authored
This patch adds OOB support for AF_UNIX sockets. The semantics is same as TCP. The last byte of a message with the OOB flag is treated as the OOB byte. The byte is separated into a skb and a pointer to the skb is stored in unix_sock. The pointer is used to enforce OOB semantics. Signed-off-by:
Rao Shoaib <rao.shoaib@oracle.com> Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-switch: integrate the MAC endpoint support This patch set integrates the already available MAC support into the dpaa2-switch driver as well. The first 4 patches are fixing up some minor problems or optimizing the code, while the remaining ones are actually integrating the dpaa2-mac support into the switch driver by calling the dpaa2_mac_* provided functions. While at it, we also export the MAC statistics in ethtool like we do for dpaa2-eth. ==================== Signed-off-by: -
Ioana Ciornei authored
If a switch port is connected to a MAC, use the common dpaa2-mac support for exporting the available MAC statistics. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Ioana Ciornei authored
In the next patch, we'll add support for also exporting the MAC statistics in the ethtool stats. Annotate already present HW stats with a suggestive prefix. Signed-off-by:
-
Ioana Ciornei authored
Integrate the common MAC endpoint management support into the dpaa2-switch driver as well. Nothing special happens here, just that the already available dpaa2-mac functions are also called from dpaa2-switch. Signed-off-by:
-
