- 31 Oct, 2012 29 commits
-
-
Piotr Haber authored
commit 1fffa905 upstream. When cores are unregistered, entries need to be removed from cores list in a safe manner. Reported-by:
Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by:
Arend Van Spriel <arend@broadcom.com> Signed-off-by:
Piotr Haber <phaber@broadcom.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stanislaw Gruszka authored
commit 4045f72b upstream. This patch fix corruption which can manifest itself by following crash when switching on rfkill switch with rt2x00 driver: https://bugzilla.redhat.com/attachment.cgi?id=615362 Pointer key->u.ccmp.tfm of group key get corrupted in: ieee80211_rx_h_michael_mic_verify(): /* update IV in key information to be able to detect replays */ rx->key->u.tkip.rx[rx->security_idx].iv32 = rx->tkip_iv32; rx->key->u.tkip.rx[rx->security_idx].iv16 = rx->tkip_iv16; because rt2x00 always set RX_FLAG_MMIC_STRIPPED, even if key is not TKIP. We already check type of the key in different path in ieee80211_rx_h_michael_mic_verify() function, so adding additional check here is reasonable. Signed-off-by:
-
Bo Shen authored
commit 7840487c upstream. The i2c core driver will turn the platform device ID to busnum When using platfrom device ID as -1, it means dynamically assigned the busnum. When writing code, we need to make sure the busnum, and call i2c_register_board_info(int busnum, ...) to register device if using -1, we do not know the value of busnum In order to solve this issue, set the platform device ID as a fix number Here using 0 to match the busnum used in i2c_regsiter_board_info() Signed-off-by:
Bo Shen <voice.shen@atmel.com> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
-
Michael S. Tsirkin authored
commit 910a578f upstream. We copy head count to a 16 bit field, this works by chance on LE but on BE guest gets 0. Fix it up. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Tested-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sarah Sharp authored
commit 43a09f7f upstream. The command cancellation code doesn't check whether find_trb_seg() couldn't find the segment that contains the TRB to be canceled. This could cause a NULL pointer deference later in the function when next_trb is called. It's unlikely to happen unless something is wrong with the command ring pointers, so add some debugging in case it happens. This patch should be backported to stable kernels as old as 3.0, that contain the commit b63f4053 "xHCI: handle command after aborting the command ring". Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Johan Hovold authored
commit e681b66f upstream. Remove private zombie flag used to signal disconnect and to prevent control urb from being submitted from interrupt urb completion handler. The control urb will not be re-submitted as both the control urb and the interrupt urb is killed on disconnect. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit 28c3ae9a upstream. The private int_urb is never allocated so the submission from the control completion handler will always fail. Remove this odd piece of broken code. Signed-off-by:
-
Johan Hovold authored
commit 3eb55cc4 upstream. The driver set the usb-serial port pointers to NULL on errors in attach, effectively preventing usb-serial core from decrementing the port ref counters and releasing the port devices and associated data. Signed-off-by:
-
Johan Hovold authored
commit 65a4cdbb upstream. Make sure control urb is freed at release. Signed-off-by:
-
Johan Hovold authored
commit 084817d7 upstream. Move interface data allocation to attach so that it is deallocated on errors in usb-serial probe. Signed-off-by:
-
Johan Hovold authored
commit 7e41f9bc upstream. Make sure port private data is deallocated on errors in attach. Signed-off-by:
-
Lennart Sorensen authored
commit f7bc5051 upstream. I found a memory leak in sierra_release() (well sierra_probe() I guess) that looses 8 bytes each time the driver releases a device. Signed-off-by:
Len Sorensen <lsorense@csclub.uwaterloo.ca> Acked-by:
-
Johan Hovold authored
commit acbf0e52 upstream. Fix memory leak in write error path. Signed-off-by:
-
Johan Hovold authored
commit ea0dbebf upstream. Make sure to allocate the control-message buffer dynamically as some platforms cannot do DMA from stack. Note that only the first byte of the old buffer was used. Signed-off-by:
-
Johan Hovold authored
commit c129197c upstream. Make sure command buffer is deallocated in case of errors during attach. Signed-off-by:
-
Octavian Purdila authored
commit 3b6054da upstream. There is a race condition in the USB hub code with regard to handling TT clear requests that can get the HCD driver in a deadlock. Usually when an TT clear request is scheduled it will be executed immediately: <7>[ 6.077583] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us] <3>[ 6.078041] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82 <7>[ 6.078299] hub_tt_work:731 <7>[ 9.309089] usb 2-1.5: link qh1-0e01/f4d506c0 start 0 [1/2 us] <7>[ 9.324526] ehci_hcd 0000:00:1d.0: reused qh f4d4db00 schedule <7>[ 9.324539] usb 2-1.3: link qh1-0e01/f4d4db00 start 0 [1/2 us] <7>[ 9.341530] usb 1-1.1: link qh4-0e01/f397aec0 start 2 [1/2 us] <7>[ 10.116159] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us] <3>[ 10.116459] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82 <7>[ 10.116537] hub_tt_work:731 However, if a suspend operation is triggered before hub_tt_work is scheduled, hub_quiesce will cancel the work without notifying the HCD driver: <3>[ 35.033941] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d80 <5>[ 35.034022] sd 0:0:0:0: [sda] Stopping disk <7>[ 35.034039] hub 2-1:1.0: hub_suspend <7>[ 35.034067] usb 2-1: unlink qh256-0001/f3b1ab00 start 1 [1/0 us] <7>[ 35.035085] hub 1-0:1.0: hub_suspend <7>[ 35.035102] usb usb1: bus suspend, wakeup 0 <7>[ 35.035106] ehci_hcd 0000:00:1a.0: suspend root hub <7>[ 35.035298] hub 2-0:1.0: hub_suspend <7>[ 35.035313] usb usb2: bus suspend, wakeup 0 <7>[ 35.035315] ehci_hcd 0000:00:1d.0: suspend root hub <6>[ 35.250017] PM: suspend of devices complete after 216.979 msecs <6>[ 35.250822] PM: late suspend of devices complete after 0.799 msecs <7>[ 35.252343] ehci_hcd 0000:00:1d.0: wakeup: 1 <7>[ 35.262923] ehci_hcd 0000:00:1d.0: --> PCI D3hot <7>[ 35.263302] ehci_hcd 0000:00:1a.0: wakeup: 1 <7>[ 35.273912] ehci_hcd 0000:00:1a.0: --> PCI D3hot <6>[ 35.274254] PM: noirq suspend of devices complete after 23.442 msecs <6>[ 35.274975] ACPI: Preparing to enter system sleep state S3 <6>[ 35.292666] PM: Saving platform NVS memory <7>[ 35.295030] Disabling non-boot CPUs ... <6>[ 35.297351] CPU 1 is now offline <6>[ 35.300345] CPU 2 is now offline <6>[ 35.303929] CPU 3 is now offline <7>[ 35.303931] lockdep: fixing up alternatives. <6>[ 35.304825] Extended CMOS year: 2000 When the device will resume the EHCI driver will get stuck in ehci_endpoint_disable waiting for the tt_clearing flag to reset: <0>[ 47.610967] usb 2-1.3: **** DPM device timeout **** <7>[ 47.610972] f2f11c60 00000092 f2f11c0c c10624a5 00000003 f4c6e880 c1c8a4c0 c1c8a4c0 <7>[ 47.610983] 15c55698 0000000b f56b34c0 f2a45b70 f4c6e880 00000082 f2a4602c f2f11c30 <7>[ 47.610993] c10787f8 f4cac000 f2a45b70 00000000 f4cac010 f2f11c58 00000046 00000001 <7>[ 47.611004] Call Trace: <7>[ 47.611006] [<c10624a5>] ? sched_clock_cpu+0xf5/0x160 <7>[ 47.611019] [<c10787f8>] ? lock_release_holdtime.part.22+0x88/0xf0 <7>[ 47.611026] [<c103ed46>] ? lock_timer_base.isra.35+0x26/0x50 <7>[ 47.611034] [<c17592d3>] ? schedule_timeout+0x133/0x290 <7>[ 47.611044] [<c175b43e>] schedule+0x1e/0x50 <7>[ 47.611051] [<c17592d8>] schedule_timeout+0x138/0x290 <7>[ 47.611057] [<c10624a5>] ? sched_clock_cpu+0xf5/0x160 <7>[ 47.611063] [<c103e560>] ? usleep_range+0x40/0x40 <7>[ 47.611070] [<c1759445>] schedule_timeout_uninterruptible+0x15/0x20 <7>[ 47.611077] [<c14935f4>] ehci_endpoint_disable+0x64/0x160 <7>[ 47.611084] [<c147d1ee>] ? usb_hcd_flush_endpoint+0x10e/0x1d0 <7>[ 47.611092] [<c1165663>] ? sysfs_add_file+0x13/0x20 <7>[ 47.611100] [<c147d5a9>] usb_hcd_disable_endpoint+0x29/0x40 <7>[ 47.611107] [<c147fafc>] usb_disable_endpoint+0x5c/0x80 <7>[ 47.611111] [<c147fb57>] usb_disable_interface+0x37/0x50 <7>[ 47.611116] [<c1477650>] usb_reset_and_verify_device+0x4b0/0x640 <7>[ 47.611122] [<c1474665>] ? hub_port_status+0xb5/0x100 <7>[ 47.611129] [<c147a975>] usb_port_resume+0xd5/0x220 <7>[ 47.611136] [<c148877f>] generic_resume+0xf/0x30 <7>[ 47.611142] [<c14821a3>] usb_resume+0x133/0x180 <7>[ 47.611147] [<c1473b10>] ? usb_dev_thaw+0x10/0x10 <7>[ 47.611152] [<c1473b1d>] usb_dev_resume+0xd/0x10 <7>[ 47.611157] [<c13baa60>] dpm_run_callback+0x40/0xb0 <7>[ 47.611164] [<c13bdb03>] ? pm_runtime_enable+0x43/0x70 <7>[ 47.611171] [<c13bafc6>] device_resume+0x1a6/0x2c0 <7>[ 47.611177] [<c13ba940>] ? dpm_show_time+0xe0/0xe0 <7>[ 47.611183] [<c13bb0f9>] async_resume+0x19/0x40 <7>[ 47.611189] [<c10580c4>] async_run_entry_fn+0x64/0x160 <7>[ 47.611196] [<c104a244>] ? process_one_work+0x104/0x480 <7>[ 47.611203] [<c104a24c>] ? process_one_work+0x10c/0x480 <7>[ 47.611209] [<c104a2c0>] process_one_work+0x180/0x480 <7>[ 47.611215] [<c104a244>] ? process_one_work+0x104/0x480 <7>[ 47.611220] [<c1058060>] ? async_schedule+0x10/0x10 <7>[ 47.611226] [<c104c15c>] worker_thread+0x11c/0x2f0 <7>[ 47.611233] [<c104c040>] ? manage_workers.isra.27+0x1f0/0x1f0 <7>[ 47.611239] [<c10507f8>] kthread+0x78/0x80 <7>[ 47.611244] [<c1750000>] ? timer_cpu_notify+0xd6/0x20d <7>[ 47.611253] [<c1050780>] ? __init_kthread_worker+0x60/0x60 <7>[ 47.611258] [<c176357e>] kernel_thread_helper+0x6/0xd <7>[ 47.611283] ------------[ cut here ]------------ This patch changes hub_quiesce behavior to flush the TT clear work instead of canceling it, to make sure that no TT clear request remains uncompleted before suspend. Signed-off-by:
Octavian Purdila <octavian.purdila@intel.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Michael Shigorin authored
commit d7870af7 upstream. This commit sets removable subclass for Casio EX-N1 digital camera. The patch has been tested within an ALT Linux kernel: http://git.altlinux.org/people/led/packages/?p=kernel-image-3.0.git;a=commitdiff;h=c0fd891836e89fe0c93a4d536a59216d90e4e3e7 See also https://bugzilla.kernel.org/show_bug.cgi?id=49221Signed-off-by:
Oleksandr Chumachenko <ledest@gmail.com> Signed-off-by:
Michael Shigorin <mike@osdn.org.ua> Signed-off-by:
-
Anisse Astier authored
commit 8daf8b60 upstream. Board name changed on another shipping Lucid tablet. Signed-off-by:
Anisse Astier <anisse@astier.eu> Signed-off-by:
-
Anisse Astier authored
commit c323dc02 upstream. BIOS vendors keep changing the BIOS versions. Only match the beginning of the string to match all Lucid tablets with board name M11JB. Signed-off-by:
-
Geert Uytterhoeven authored
commit 66081a72 upstream. The warning check for duplicate sysfs entries can cause a buffer overflow when printing the warning, as strcat() doesn't check buffer sizes. Use strlcat() instead. Since strlcat() doesn't return a pointer to the passed buffer, unlike strcat(), I had to convert the nested concatenation in sysfs_add_one() to an admittedly more obscure comma operator construct, to avoid emitting code for the concatenation if CONFIG_BUG is disabled. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Trond Myklebust authored
commit 4bc1e68e upstream. The call to xprt_disconnect_done() that is triggered by a successful connection reset will trigger another automatic wakeup of all tasks on the xprt->pending rpc_wait_queue. In particular it will cause an early wake up of the task that called xprt_connect(). All we really want to do here is clear all the socket-specific state flags, so we split that functionality out of xs_sock_mark_closed() into a helper that can be called by xs_abort_connection() Reported-by:
Chris Perl <chris.perl@gmail.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by:
-
Trond Myklebust authored
commit b9d2bb2e upstream. This reverts commit 55420c24. Now that we clear the connected flag when entering TCP_CLOSE_WAIT, the deadlock described in this commit is no longer possible. Instead, the resulting call to xs_tcp_shutdown() can interfere with pending reconnection attempts. Reported-by:
-
Trond Myklebust authored
commit d0bea455 upstream. This is needed to ensure that we call xprt_connect() upon the next call to call_connect(). Signed-off-by:
-
Trond Myklebust authored
commit f878b657 upstream. Chris Perl reports that we're seeing races between the wakeup call in xs_error_report and the connect attempts. Basically, Chris has shown that in certain circumstances, the call to xs_error_report causes the rpc_task that is responsible for reconnecting to wake up early, thus triggering a disconnect and retry. Since the sk->sk_error_report() calls in the socket layer are always followed by a tcp_done() in the cases where we care about waking up the rpc_tasks, just let the state_change callbacks take responsibility for those wake ups. Reported-by:
-
Will Deacon authored
commit 5f40b909 upstream. When booting a secondary CPU, the primary CPU hands two sets of page tables via the secondary_data struct: (1) swapper_pg_dir: a normal, cacheable, shared (if SMP) mapping of the kernel image (i.e. the tables used by init_mm). (2) idmap_pgd: an uncached mapping of the .idmap.text ELF section. The idmap is generally used when enabling and disabling the MMU, which includes early CPU boot. In this case, the secondary CPU switches to swapper as soon as it enters C code: struct mm_struct *mm = &init_mm; unsigned int cpu = smp_processor_id(); /* * All kernel threads share the same mm context; grab a * reference and switch to it. */ atomic_inc(&mm->mm_count); current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); cpu_switch_mm(mm->pgd, mm); This causes a problem on ARMv7, where the identity mapping is treated as strongly-ordered leading to architecturally UNPREDICTABLE behaviour of exclusive accesses, such as those used by atomic_inc. This patch re-orders the secondary_start_kernel function so that we switch to swapper before performing any exclusive accesses. Reported-by:
Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> Cc: David McKay <david.mckay@st.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
commit eedce141 upstream. The genalloc code uses the bitmap API from include/linux/bitmap.h and lib/bitmap.c, which is based on long values. Both bitmap_set from lib/bitmap.c and bitmap_set_ll, which is the lockless version from genalloc.c, use BITMAP_LAST_WORD_MASK to set the first bits in a long in the bitmap. That one uses (1 << bits) - 1, 0b111, if you are setting the first three bits. This means that the API counts from the least significant bits (LSB from now on) to the MSB. The LSB in the first long is bit 0, then. The same works for the lookup functions. The genalloc code uses longs for the bitmap, as it should. In include/linux/genalloc.h, struct gen_pool_chunk has unsigned long bits[0] as its last member. When allocating the struct, genalloc should reserve enough space for the bitmap. This should be a proper number of longs that can fit the amount of bits in the bitmap. However, genalloc allocates an integer number of bytes that fit the amount of bits, but may not be an integer amount of longs. 9 bytes, for example, could be allocated for 70 bits. This is a problem in itself if the Least Significat Bit in a long is in the byte with the largest address, which happens in Big Endian machines. This means genalloc is not allocating the byte in which it will try to set or check for a bit. This may end up in memory corruption, where genalloc will try to set the bits it has not allocated. In fact, genalloc may not set these bits because it may find them already set, because they were not zeroed since they were not allocated. And that's what causes a BUG when gen_pool_destroy is called and check for any set bits. What really happens is that genalloc uses kmalloc_node with __GFP_ZERO on gen_pool_add_virt. With SLAB and SLUB, this means the whole slab will be cleared, not only the requested bytes. Since struct gen_pool_chunk has a size that is a multiple of 8, and slab sizes are multiples of 8, we get lucky and allocate and clear the right amount of bytes. Hower, this is not the case with SLOB or with older code that did memset after allocating instead of using __GFP_ZERO. So, a simple module as this (running 3.6.0), will cause a crash when rmmod'ed. [root@phantom-lp2 foo]# cat foo.c #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> #include <linux/genalloc.h> MODULE_LICENSE("GPL"); MODULE_VERSION("0.1"); static struct gen_pool *foo_pool; static __init int foo_init(void) { int ret; foo_pool = gen_pool_create(10, -1); if (!foo_pool) return -ENOMEM; ret = gen_pool_add(foo_pool, 0xa0000000, 32 << 10, -1); if (ret) { gen_pool_destroy(foo_pool); return ret; } return 0; } static __exit void foo_exit(void) { gen_pool_destroy(foo_pool); } module_init(foo_init); module_exit(foo_exit); [root@phantom-lp2 foo]# zcat /proc/config.gz | grep SLOB CONFIG_SLOB=y [root@phantom-lp2 foo]# insmod ./foo.ko [root@phantom-lp2 foo]# rmmod foo ------------[ cut here ]------------ kernel BUG at lib/genalloc.c:243! cpu 0x4: Vector: 700 (Program Check) at [c0000000bb0e7960] pc: c0000000003cb50c: .gen_pool_destroy+0xac/0x110 lr: c0000000003cb4fc: .gen_pool_destroy+0x9c/0x110 sp: c0000000bb0e7be0 msr: 8000000000029032 current = 0xc0000000bb0e0000 paca = 0xc000000006d30e00 softe: 0 irq_happened: 0x01 pid = 13044, comm = rmmod kernel BUG at lib/genalloc.c:243! [c0000000bb0e7ca0] d000000004b00020 .foo_exit+0x20/0x38 [foo] [c0000000bb0e7d20] c0000000000dff98 .SyS_delete_module+0x1a8/0x290 [c0000000bb0e7e30] c0000000000097d4 syscall_exit+0x0/0x94 --- Exception: c00 (System Call) at 000000800753d1a0 SP (fffd0b0e640) is in userspace Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Benjamin Gaignard <benjamin.gaignard@stericsson.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jan Luebbe authored
commit fee0de77 upstream. Signed-off-by:
Jan Luebbe <jlu@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Roland Stigge <stigge@antcom.de> Cc: Grant Likely <grant.likely@secretlab.ca> Tested-by:
Roland Stigge <stigge@antcom.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by:
-
Kees Cook authored
commit 12176503 upstream. The compat ioctl for VIDEO_SET_SPU_PALETTE was missing an error check while converting ioctl arguments. This could lead to leaking kernel stack contents into userspace. Patch extracted from existing fix in grsecurity. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: David Miller <davem@davemloft.net> Cc: Brad Spengler <spender@grsecurity.net> Cc: PaX Team <pageexec@freemail.hu> Signed-off-by:
-
Kees Cook authored
commit 20f1de65 upstream. Fix possible overflow of the buffer used for expanding environment variables when building file list. In the extremely unlikely case of an attacker having control over the environment variables visible to gen_init_cpio, control over the contents of the file gen_init_cpio parses, and gen_init_cpio was built without compiler hardening, the attacker can gain arbitrary execution control via a stack buffer overflow. $ cat usr/crash.list file foo ${BIG}${BIG}${BIG}${BIG}${BIG}${BIG} 0755 0 0 $ BIG=$(perl -e 'print "A" x 4096;') ./usr/gen_init_cpio usr/crash.list *** buffer overflow detected ***: ./usr/gen_init_cpio terminated This also replaces the space-indenting with tabs. Patch based on existing fix extracted from grsecurity. Signed-off-by:
-
- 28 Oct, 2012 11 commits
-
-
Greg Kroah-Hartman authored
-
Elric Fu authored
commit b63f4053 upstream. According to xHCI spec section 4.6.1.1 and section 4.6.1.2, after aborting a command on the command ring, xHC will generate a command completion event with its completion code set to Command Ring Stopped at least. If a command is currently executing at the time of aborting a command, xHC also generate a command completion event with its completion code set to Command Abort. When the command ring is stopped, software may remove, add, or rearrage Command Descriptors. To cancel a command, software will initialize a command descriptor for the cancel command, and add it into a cancel_cmd_list of xhci. When the command ring is stopped, software will find the command trbs described by command descriptors in cancel_cmd_list and modify it to No Op command. If software can't find the matched trbs, we can think it had been finished. This patch should be backported to kernels as old as 3.0, that contain the commit 7ed603ec "xhci: Add an assertion to check for virt_dev=0 bug." That commit papers over a NULL pointer dereference, and this patch fixes the underlying issue that caused the NULL pointer dereference. Note from Sarah: The TRB_TYPE_LINK_LE32 macro is not in the 3.0 stable kernel, so I added it to this patch. Signed-off-by:
Elric Fu <elricfu1@gmail.com> Signed-off-by:
Miroslav Sabljic <miroslav.sabljic@avl.com> Signed-off-by:
-
Elric Fu authored
commit 6e4468b9 upstream. The patch is used to cancel command when the command isn't acknowledged and a timeout occurs. This patch should be backported to kernels as old as 3.0, that contain the commit 7ed603ec "xhci: Add an assertion to check for virt_dev=0 bug." That commit papers over a NULL pointer dereference, and this patch fixes the underlying issue that caused the NULL pointer dereference. Signed-off-by:
-
Elric Fu authored
commit b92cc66c upstream. Software have to abort command ring and cancel command when a command is failed or hang. Otherwise, the command ring will hang up and can't handle the others. An example of a command that may hang is the Address Device Command, because waiting for a SET_ADDRESS request to be acknowledged by a USB device is outside of the xHC's ability to control. To cancel a command, software will initialize a command descriptor for the cancel command, and add it into a cancel_cmd_list of xhci. Sarah: Fixed missing newline on "Have the command ring been stopped?" debugging statement. This patch should be backported to kernels as old as 3.0, that contain the commit 7ed603ec "xhci: Add an assertion to check for virt_dev=0 bug." That commit papers over a NULL pointer dereference, and this patch fixes the underlying issue that caused the NULL pointer dereference. Signed-off-by:
-
Elric Fu authored
commit c181bc5b upstream. Adding cmd_ring_state for command ring. It helps to verify the current command ring state for controlling the command ring operations. This patch should be backported to kernels as old as 3.0. The commit 7ed603ec "xhci: Add an assertion to check for virt_dev=0 bug." papers over the NULL pointer dereference that I now believe is related to a timed out Set Address command. This (and the four patches that follow it) contain the real fix that also allows VIA USB 3.0 hubs to consistently re-enumerate during the plug/unplug stress tests. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 2856cc2e ] On a 2-node machine with 256GB of ram we get 512 lines of console output, which is just too much. This mimicks Yinghai Lu's x86 commit c2b91e2e (x86_64/mm: check and print vmemmap allocation continuous) except that we aren't ever going to get contiguous block pointers in between calls so just print when the virtual address or node changes. This decreases the output by an order of 16. Also demote this to KERN_DEBUG. Signed-off-by:
-
Jiri Kosina authored
[ Upstream commit a27032ee ] There are multiple errors in how sys_sparc64_personality() handles personality flags stored in top three bytes. - directly comparing current->personality against PER_LINUX32 doesn't work in cases when any of the personality flags stored in the top three bytes are used. - directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes Fix the first one by properly using personality() macro to compare only PER_MASK bytes. Fix the second one by setting only the bits that should be set, instead of overwriting the whole value. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
David S. Miller authored
[ Upstream commit e793d8c6 ] There was a serious disconnect in the logic happening in sparc_pmu_disable_event() vs. sparc_pmu_enable_event(). Event disable is implemented by programming a NOP event into the PCR. However, event enable was not reversing this operation. Instead, it was setting the User/Priv/Hypervisor trace enable bits. That's not sparc_pmu_enable_event()'s job, that's what sparc_pmu_enable() and sparc_pmu_disable() do . The intent of sparc_pmu_enable_event() is clear, since it first clear out the event type encoding field. So fix this by OR'ing in the event encoding rather than the trace enable bits. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 08280e6c ] If the MM is not active, only report the top-level PC. Do not try to access the address space. Signed-off-by:
-
Al Viro authored
[ Upstream commit 55c2770e ] we want syscall_trace_leave() called on exit from any syscall; skipping its call in case we'd done force_successful_syscall_return() is broken... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Alexey Kuznetsov authored
[ Upstream commit 4c675258 ] After commit e2446eaa ("tcp_v4_send_reset: binding oif to iif in no sock case").. tcp resets are always lost, when routing is asymmetric. Yes, backing out that patch will result in misrouting of resets for dead connections which used interface binding when were alive, but we actually cannot do anything here. What's died that's died and correct handling normal unbound connections is obviously a priority. Comment to comment: > This has few benefits: > 1. tcp_v6_send_reset already did that. It was done to route resets for IPv6 link local addresses. It was a mistake to do so for global addresses. The patch fixes this as well. Actually, the problem appears to be even more serious than guaranteed loss of resets. As reported by Sergey Soloviev <sol@eqv.ru>, those misrouted resets create a lot of arp traffic and huge amount of unresolved arp entires putting down to knees NAT firewalls which use asymmetric routing. Signed-off-by:
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by:
-
