- 09 Dec, 2011 27 commits
-
-
Timo Juhani Lindfors authored
commit 2391a0e0 upstream. This patch makes it possible to set DAI mode to its currently applied value even if codec is active. This is necessary to allow aplay -t raw -r 44100 -f S16_LE -c 2 < /dev/urandom & alsactl store -f backup.state alsactl restore -f backup.state to work without returning errors. This patch is based on a patch sent by Klaus Kurzmann <mok@fluxnetz.de>. Signed-off-by:
Timo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Timur Tabi authored
commit 0f768a72 upstream. Commit 6992f533 ("sysfs: Use one lockdep class per sysfs attribute") requires 'struct attribute' objects to be initialized with sysfs_attr_init(). Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
-
Johannes Stezenbach authored
commit 54dc6cab upstream. The coefficient RAM must be saved in a shadow so it can be restored when the codec is powered on using regulator_bulk_enable(). Signed-off-by:
Johannes Stezenbach <js@sig21.net> Signed-off-by:
-
Takashi Iwai authored
commit 6759dc32 upstream. When the imux entries are rebuilt in alc_rebuild_imux_for_auto_mic(), the initialization of index field is missing. It may work without it casually when the original imux was created by the auto-parser, but it's definitely broken in the case of static configs where no imux was parsed beforehand. Because of this, the auto-mic switching doesn't work properly on some model options. This patch adds the missing initialization of index field. Reported-by:
Dmitry Nezhevenko <dion@inhex.net> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Tim Blechmann authored
commit a2987855 upstream. commit 6175ddf0 optimized the mem*io functions that have been used to send commands to the device. these optimizations somehow corrupted the communication with the lx6464es, that resulted the device to be unusable with kernels after 2.6.33. this patch emulates the memcpy_*_io functions via a loop to avoid these problems. Signed-off-by:
Tim Blechmann <tim@klingt.org> LKML-Reference: <4ECB5257.4040600@ladisch.de> Signed-off-by:
-
Takashi Iwai authored
commit 187d333e upstream. VT1708 has no support for unsolicited events per jack-plug, the driver implements the workq for polling the jack-detection. The mixer element "Jack Detect" was supposed to control this behavior on/off, but this doesn't work properly as is now. The workq is always started and the HP automute is always enabled. This patch fixes the jack-detect control behavior by triggering / stopping the work appropriately at the state change. Also the work checks the internal state to continue scheduling or not. Signed-off-by:
-
Will Deacon authored
commit 11ed0ba1 upstream. This patch implements a workaround for PL310 erratum 769419. On revisions of the PL310 prior to r3p2, the Store Buffer does not automatically drain. This can cause normal, non-cacheable writes to be retained when the memory system is idle, leading to suboptimal I/O performance for drivers using coherent DMA. This patch adds an optional wmb() call to the cpu_idle loop. On systems with an outer cache, this causes an explicit flush of the store buffer. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Tested-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Kevin Hilman authored
commit 46232a36 upstream. Current code registers voltage layer details for TWL PMIC even when a TWL has not been registered. Fix this to only register the TWL with voltage layer when the TWL PMIC is initialized by board-level code. Signed-off-by:
Kevin Hilman <khilman@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Ming Lei authored
commit a8a6565c upstream. This patch selects ARM_AMBA if OMAP3_EMU is defined because OC_ETM depends on ARM_AMBA, so fix the link failure[1]. [1], arch/arm/kernel/built-in.o: In function `etm_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:609: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:409: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etm_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:640: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:646: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:648: undefined reference to `amba_driver_unregister' arch/arm/kernel/built-in.o: In function `etm_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:545: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:595: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:347: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:392: undefined reference to `amba_release_regions' arch/arm/mach-omap2/built-in.o: In function `emu_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:62: undefined reference to `amba_device_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:63: undefined reference to `amba_device_register' make: *** [.tmp_vmlinux1] Error 1 making modules Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Signed-off-by:
-
sricharan authored
commit cc1b0765 upstream. The address spaces, irqs and dma reqs count APIs return the number of corresponding entries in a hwmod including a additional null value or a -1 terminator in the structure introduced recently. More information here: - 212738a4: omap_hwmod: use a terminator record with omap_hwmod_mpu_irqs arrays - 78183f3f: omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space arrays - bc614958: omap_hwmod: use a terminator record with omap_hwmod_dma_info arrays The issue with irqs and dma info was originally reported by Benoit Cousson. The devices which have multiple hwmods and use device_build_ss are broken with this, as their resources are populated with a extra null value, subsequently the probe fails. So fix the API not to include the array terminator in the count. Reported-by:
Benoit Cousson <b-cousson@ti.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimar@ti.com> Signed-off-by:
sricharan <r.sricharan@ti.com> Signed-off-by:
-
Felipe Balbi authored
commit 5a4f1844 upstream. Fix a bug which has been on this driver since it was added by the original commit 984aa6db which would never clear IRQSTATUS bits. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Wolfram Sang authored
commit c2735391 upstream. reg | (1 << clk->enable_shift) always evaluates to true. Switch it to & which makes much more sense. Same fix as 13be9f00 (ARM i.MX28: fix bit operation) at a different location. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Haojian Zhuang authored
commit c0a39151 upstream. Since CONFIG_USB_GADGET_PXA27X and other macros are renamed to CONFIG_USB_PXA27X. Update them in arch/arm/mach-pxa and arch/arm/configs to keep consistent. Signed-off-by:
Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by:
Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
-
Daniel Drake authored
commit a3283969 upstream. While the OLPC display appears to be able to handle either positive or negative sync, the Display Controller only recognises positive sync. This brings viafb (for XO-1.5) in line with lxfb (for XO-1) and fixes a recent regression where the XO-1.5 DCON could no longer be frozen. Thanks to Florian Tobias Schandinat for helping identify the fix. Test case: from a vt, echo 1 > /sys/devices/platform/dcon/freeze should cause the current screen contents to freeze, rather than garbage being displayed. Signed-off-by:
Daniel Drake <dsd@laptop.org> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Alex Deucher authored
commit 6c47e5c2 upstream. Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 4cac2eb1 upstream. Previously we claimed device ID 0x7450, regardless of the vendor, which is clearly wrong. Now we'll claim that device ID only for AMD. I suspect this was just a typo in the original code, but it's possible this change will break shpchp on non-7450 AMD bridges. If so, we'll have to fix them as we find them. Reference: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=638863Reported-by:
Ralf Jung <ralfjung-e@gmx.de> Cc: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Takashi Iwai authored
commit 04b38670 upstream. When the brightness property is inquired while the backlight is disabled, the driver returns a wrong value (zero) because it probes the value after the backlight was turned off. This caused a black screen even after the backlight is enabled again. It should return the internal backlight_level instead, so that it won't be influenced by the backlight-enable state. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=41926 BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/872652Tested-by:
Kamal Mostafa <kamal@canonical.com> Cc: Alex Davis <alex14641@yahoo.com> Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Eric Anholt authored
commit 9ca1d10d upstream. Unlike the previous one, I don't have known testcases it fixes. I'd rather not go through the same debug cycle on whatever testcases those might be. Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Eric Anholt authored
commit 406478dc upstream. Fixes rendering failures in Unigine Tropics and Sanctuary and the mesa "fire" demo. Signed-off-by:
-
Daniel Vetter authored
commit 775d17b6 upstream. So don't forget to restore them on resume and dump them into the error state. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Alex Deucher authored
commit d724502a upstream. Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. I missed this part the first time through. Signed-off-by:
-
Xi Wang authored
commit a5cd3351 upstream. There is a potential integer overflow in drm_mode_dirtyfb_ioctl() if userspace passes in a large num_clips. The call to kmalloc would allocate a small buffer, and the call to fb->funcs->dirty may result in a memory corruption. Reported-by:
Haogang Chen <haogangchen@gmail.com> Signed-off-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
-
Phil Sutter authored
commit 27425286 upstream. This was broken by commit 7759995c (yes, myself). The basic problem here is since the digest state is only saved after the last chunk, the state array is only valid when handling the first chunk of the next buffer. Broken since linux-3.0. Signed-off-by:
Phil Sutter <phil.sutter@viprinet.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tyler Hicks authored
commit 0f751e64 upstream. From mhalcrow's original commit message: Characters with ASCII values greater than the size of filename_rev_map[] are valid filename characters. ecryptfs_decode_from_filename() will access kernel memory beyond that array, and ecryptfs_parse_tag_70_packet() will then decrypt those characters. The attacker, using the FNEK of the crafted file, can then re-encrypt the characters to reveal the kernel memory past the end of the filename_rev_map[] array. I expect low security impact since this array is statically allocated in the text area, and the amount of memory past the array that is accessible is limited by the largest possible ASCII filename character. This patch solves the issue reported by mhalcrow but with an implementation suggested by Linus to simply extend the length of filename_rev_map[] to 256. Characters greater than 0x7A are mapped to 0x00, which is how invalid characters less than 0x7A were previously being handled. Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Reported-by:
Michael Halcrow <mhalcrow@google.com> Signed-off-by:
-
Jeffrey (Sheng-Hui) Chu authored
commit cc6bcf7d upstream. The wrong bits were put on the wire, fix that. This fixes kernel bug #42562. Signed-off-by:
Sheng-Hui J. Chu <jeffchu@broadcom.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Tyler Hicks authored
commit 32001d6f upstream. Dirty pages weren't being written back when an mmap'ed eCryptfs file was closed before the mapping was unmapped. Since f_ops->flush() is not called by the munmap() path, the lower file was simply being released. This patch flushes the eCryptfs file in the vm_ops->close() path. https://launchpad.net/bugs/870326Signed-off-by:
-
Tyler Hicks authored
commit b59db43a upstream. The file creation path prematurely called d_instantiate() and unlock_new_inode() before the eCryptfs inode info was fully allocated and initialized and before the eCryptfs metadata was written to the lower file. This could result in race conditions in subsequent file and inode operations leading to unexpected error conditions or a null pointer dereference while attempting to use the unallocated memory. https://launchpad.net/bugs/813146Signed-off-by:
-
- 28 Nov, 2011 2 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit f0cc710a. Cc: Matthieu Castet <matthieu.castet@parrot.com> Cc: Thomas Poussevin <thomas.poussevin@parrot.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
- 26 Nov, 2011 11 commits
-
-
Greg Kroah-Hartman authored
-
Mikulas Patocka authored
commit 09f363c7 upstream. The callback must not return -1 when nr_to_scan is zero. Fix the bug in fs/super.c and add this requirement to the callback specification. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Antonio Quartulli authored
commit 93840ac4 upstream. Function tt_response_fill_table() actually uses a tt_local_entry pointer to iterate either over the local or the global table entries (it depends on the what hash table is passed as argument). To iterate over such entries the hlist_for_each_entry_rcu() macro has to access their "hash_entry" field which MUST be at the same position in both the tt_global/local_entry structures. Reported-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
Antonio Quartulli <ordex@autistici.org> Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
-
Simon Wunderlich authored
commit 6e801494 upstream. After removing the batman-adv module, the hash may be already gone when tt_global_del_orig() tries to clean the hash. This patch adds a sanity check to avoid this. Signed-off-by:
Alexey Fisher <bug-track@fisher-privat.net> Signed-off-by:
-
Simon Wunderlich authored
commit 531027fc upstream. struct tt_global_entry holds a reference to an orig_node which must be decremented before deallocating the structure. Signed-off-by:
-
Antonio Quartulli authored
commit 9d852393 upstream. In the TT_RESPONSE packet, the number of carried entries is not correctly set. This leads to a wrong interpretation of the packet payload on the receiver side causing random entries to be added to the global translation table. Therefore the latter gets always corrupted, triggering a table recovery all the time. Signed-off-by:
-
Antonio Quartulli authored
commit 31901264 upstream. Currently the counter of tt_local_entry structures (tt_local_num) is incremented each time the tt_local_reset_flags() is invoked causing the node to send wrong TT_REPONSE packets containing a copy of non-initialised memory thus corrupting other nodes global translation table and making higher level communication impossible. Reported-by:
Junkeun Song <jun361@gmail.com> Signed-off-by:
-
Jesse Barnes authored
commit c4f9c4c2 upstream. It's needed for 3 pipe support as well as just regular functionality (e.g. DisplayPort). Signed-off-by:
Adam Jackson <ajax@redhat.com> Tested-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Robert Hooker <robert.hooker@canonical.com> Signed-off-by:
-
Jesse Barnes authored
commit 65a21cd6 upstream. The cursor regs have moved around, add the offsets and new macros for getting at them. Signed-off-by:
-
sordna authored
commit 0d145d7d upstream. The following patch contains additional affected webcam models, on top of the patches commited to linux-next 2394d67e and 5b253d88Signed-off-by:
sordna <sordna@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Josh Boyer authored
commit 60c71ca9 upstream. We've had another report of the "chipmunk" sound on a Logitech C600 webcam. This patch resolves the issue. Signed-off-by:
Josh Boyer <jwboyer@redhat.com> Signed-off-by:
-
