If the ring buffer is disabled and the irqsoff tracer records a trace it
will clear out its buffer and lose the data it had previously recorded.

Currently there's a callback when writing to the tracing_of file, but if
tracing is disabled via the function tracer trigger, it will not inform
the irqsoff tracer to stop recording.

By using the "mirror" flag (buffer_disabled) in the trace_array, that keeps
track of the status of the trace_array's buffer, it gives the irqsoff
tracer a fast way to know if it should record a new trace or not.
The flag may be a little behind the real state of the buffer, but it
should not affect the trace too much. It's more important for the irqsoff
tracer to be fast.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

I think that "ftrace_event_file *trace_probe[]" complicates the
code for no reason, turn it into list_head to simplify the code.
enable_trace_probe() no longer needs synchronize_sched().

This needs the extra sizeof(list_head) memory for every attached
ftrace_event_file, hopefully not a problem in this case.

Link: http://lkml.kernel.org/r/20130620173814.GA13165@redhat.comAcked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The comment on the soft disable 'disable' case of
__ftrace_event_enable_disable() states that the soft disable bit
should be cleared in that case, but currently only the soft mode bit
is actually cleared.

This essentially leaves the standard non-soft-enable enable/disable
paths as the only way to clear the soft disable flag, but the soft
disable bit should also be cleared when removing a trigger with '!'.

Also, the SOFT_DISABLED bit should never be set if SOFT_MODE is
cleared.

This fixes the above discrepancies.

Link: http://lkml.kernel.org/r/b9c68dd50bc07019e6c67d3f9b29be4ef1b2badb.1372479499.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add the missing syscall_metadata description for the enter_fields
struct member.

Link: http://lkml.kernel.org/r/74c3407cd1e5d37f2c5aaca637aa4d35f66f1aa2.1372479499.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Rather than enumerating each permutation, build the enable state
string up from the combination of states.  This also allows for the
simpler addition of more states.

Link: http://lkml.kernel.org/r/9aff5af6dee2f5a40ca30df41c39d5f33e998d7a.1372479499.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

enable_trace_probe() and disable_trace_probe() should not worry about
serialization, the caller (perf_trace_init or __ftrace_set_clr_event)
holds event_mutex.

They are also called by kprobe_trace_self_tests_init(), but this __init
function can't race with itself or trace_events.c

And note that this code depended on event_mutex even before 41a7dd42
which introduced probe_enable_lock. In fact it assumes that the caller
kprobe_register() can never race with itself. Otherwise, say, tp->flags
manipulations are racy.

Link: http://lkml.kernel.org/r/20130620173809.GA13158@redhat.comAcked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

perf_trace_buf_prepare() + perf_trace_buf_submit() make no sense
if this task/CPU has no active counters. Change kprobe_perf_func()
and kretprobe_perf_func() to check call->perf_events beforehand
and return if this list is empty.

For example, "perf record -e some_probe -p1". Only /sbin/init will
report, all other threads which hit the same probe will do
perf_trace_buf_prepare/perf_trace_buf_submit just to realize that
nobody wants perf_swevent_event().

Link: http://lkml.kernel.org/r/20130620173806.GA13151@redhat.comAcked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Running the following:

 # cd /sys/kernel/debug/tracing
 # echo p:i do_sys_open > kprobe_events
 # echo p:j schedule >> kprobe_events
 # cat kprobe_events
p:kprobes/i do_sys_open
p:kprobes/j schedule
 # echo p:i do_sys_open >> kprobe_events
 # cat kprobe_events
p:kprobes/j schedule
p:kprobes/i do_sys_open
 # ls /sys/kernel/debug/tracing/events/kprobes/
enable  filter  j

Notice that the 'i' is missing from the kprobes directory.

The console produces:

"Failed to create system directory kprobes"

This is because kprobes passes in a allocated name for the system
and the ftrace event subsystem saves off that name instead of creating
a duplicate for it. But the kprobes may free the system name making
the pointer to it invalid.

This bug was introduced by 92edca07 "tracing: Use direct field, type
and system names" which switched from using kstrdup() on the system name
in favor of just keeping apointer to it, as the internal ftrace event
system names are static and exist for the life of the computer being booted.

Instead of reverting back to duplicating system names again, we can use
core_kernel_data() to determine if the passed in name was allocated or
static. Then use the MSB of the ref_count to be a flag to keep track if
the name was allocated or not. Then we can still save from having to duplicate
strings that will always exist, but still copy the ones that may be freed.

Cc: stable@vger.kernel.org # 3.10
Reported-by: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com>
Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

When FUNCTION_GRAPH_TRACER is enabled, ftrace can profile kernel functions
and print basic statistics about them. Unfortunately, running stddev
calculation is wrong. This patch corrects it implementing Welford’s method:

        s^2 = 1 / (n * (n-1)) * (n * \Sum (x_i)^2 - (\Sum x_i)^2) .
Link: http://lkml.kernel.org/r/1371031398-24048-1-git-send-email-juri.lelli@gmail.com

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Since tp->flags assignment was moved into function enable_trace_probe(),
there is no need to use trace_probe_is_enabled to check flags
in the same function.

Remove the unnecessary checking.

Link: http://lkml.kernel.org/r/51BA7B9E.3040807@huawei.comAcked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add a traceoff_on_warning option in both the kernel command line as well
as a sysctl option. When set, any WARN*() function that is hit will cause
the tracing_on variable to be cleared, which disables writing to the
ring buffer.

This is useful especially when tracing a bug with function tracing. When
a warning is hit, the print caused by the warning can flood the trace with
the functions that producing the output for the warning. This can make the
resulting trace useless by either hiding where the bug happened, or worse,
by overflowing the buffer and losing the trace of the bug totally.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

b0f1a59a "tracing/filters: Use a different op for glob match" added
glob matching to tracepoint filter strings. It uses the ftrace function
tracing glob matching facility that allows for the wild card character (*)
to be used at the start and/or end of the matching string.

But the documentation still states that the filtering only allows for
exact string matches.

Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

There are some cases when filtering on a set flag of a field of a tracepoint
is useful. But currently the only filtering commands for numbered fields
is ==, !=, <, <=, >, >=. This does not help when you just want to trace if
a specific flag is set. For example:

 > # sudo trace-cmd record -e brcmfmac:brcmf_dbg -f 'level & 0x40000'
 > disable all
 > enable brcmfmac:brcmf_dbg
 > path = /sys/kernel/debug/tracing/events/brcmfmac/brcmf_dbg/enable
 > (level & 0x40000)
 > ^
 > parse_error: Invalid operator
 >

When trying to trace brcmf_dbg when level has its 1 << 18 bit set, the
filter fails to perform.

By allowing a binary '&' operation, this gives the user the ability to
test a bit.

Note, a binary '|' is not added, as it doesn't make sense as fields must
be compared to constants (for now), and ORing a constant will always return
true.

Link: http://lkml.kernel.org/r/1371057385.9844.261.camel@gandalf.local.homeSuggested-by: Arend van Spriel <arend@broadcom.com>
Tested-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

There's no point calling it when _alloc() failed.

Link: http://lkml.kernel.org/r/1370585268-29169-1-git-send-email-namhyung@kernel.orgSigned-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

This is a leftover after ftrace_regex_lseek() was renamed to
ftrace_filter_lseek() and then ftrace_filter_lseek() was moved
out side of CONFIG_DYNAMIC_FTRACE.

Link: http://lkml.kernel.org/r/51B1A1BD.40905@huawei.comSigned-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The function tracer uses preempt_disable/enable_notrace() for
synchronization between reading registered ftrace_ops and unregistering
them.

Most of the ftrace_ops are global permanent structures that do not
require this synchronization. That is, ops may be added and removed from
the hlist but are never freed, and wont hurt if a synchronization is
missed.

But this is not true for dynamically created ftrace_ops or control_ops,
which are used by the perf function tracing.

The problem here is that the function tracer can be used to trace
kernel/user context switches as well as going to and from idle.
Basically, it can be used to trace blind spots of the RCU subsystem.
This means that even though preempt_disable() is done, a
synchronize_sched() will ignore CPUs that haven't made it out of user
space or idle. These can include functions that are being traced just
before entering or exiting the kernel sections.

To implement the RCU synchronization, instead of using
synchronize_sched() the use of schedule_on_each_cpu() is performed. This
means that when a dynamically allocated ftrace_ops, or a control ops is
being unregistered, all CPUs must be touched and execute a ftrace_sync()
stub function via the work queues. This will rip CPUs out from idle or
in dynamic tick mode. This only happens when a user disables perf
function tracing or other dynamically allocated function tracers, but it
allows us to continue to debug RCU and context tracking with function
tracing.

Link: http://lkml.kernel.org/r/1369785676.15552.55.camel@gandalf.local.home

Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Commit 4f271a2a
(tracing: Add a proc file to stop tracing and free buffer)
implement a method to free up ring buffer in kernel memory
in the release code path of free_buffer's fd.

Then we don't need read/write support for free_buffer,
indeed we just have a dummy write fop, and don't implement read fop.

So the 0200 is more reasonable file mode for free_buffer than
the current file mode 0644.

Link: http://lkml.kernel.org/r/20130526085201.GA3183@udknightAcked-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Acked-by: David Sharp <dhsharp@google.com>
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Consolidate the checks for !enabled and !param to return -EINVAL
in event_enable_func().

Link: http://lkml.kernel.org/r/1369380137-12452-1-git-send-email-harsh@linux.vnet.ibm.comSigned-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add the "cpudump" command to have the current CPU ftrace buffer dumped
to console if a function is hit. This is useful when debugging a
tripple fault, where you have an idea of a function that is called
just before the tripple fault occurs, and can tell ftrace to dump its
content out to the console before it continues.

This differs from the "dump" command as it only dumps the content of
the ring buffer for the currently executing CPU, and does not show
the contents of the other CPUs.

Format is:

  <function>:cpudump

echo 'bad_address:cpudump' > /debug/tracing/set_ftrace_filter

To remove this:

echo '!bad_address:cpudump' > /debug/tracing/set_ftrace_filter
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add the "dump" command to have the ftrace buffer dumped to console if
a function is hit. This is useful when debugging a tripple fault,
where you have an idea of a function that is called just before the
tripple fault occurs, and can tell ftrace to dump its content out
to the console before it continues.

Format is:

  <function>:dump

echo 'bad_address:dump' > /debug/tracing/set_ftrace_filter

To remove this:

echo '!bad_address:dump' > /debug/tracing/set_ftrace_filter
Requested-by: Luis Claudio R. Goncalves <lclaudio@uudg.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

This patch fixes warnings due to missing lock on write error path.

  WARNING: at fs/hpfs/hpfs_fn.h:353 hpfs_truncate+0x75/0x80 [hpfs]()
  Hardware name: empty
  Pid: 26563, comm: dd Tainted: P           O 3.9.4 #12
  Call Trace:
    hpfs_truncate+0x75/0x80 [hpfs]
    hpfs_write_begin+0x84/0x90 [hpfs]
    _hpfs_bmap+0x10/0x10 [hpfs]
    generic_file_buffered_write+0x121/0x2c0
    __generic_file_aio_write+0x1c7/0x3f0
    generic_file_aio_write+0x7c/0x100
    do_sync_write+0x98/0xd0
    hpfs_file_write+0xd/0x50 [hpfs]
    vfs_write+0xa2/0x160
    sys_write+0x51/0xa0
    page_fault+0x22/0x30
    system_call_fastpath+0x1a/0x1f
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: stable@kernel.org  # 2.6.39+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull timer fixes from Thomas Gleixner:

 - Trivial: unused variable removal

 - Posix-timers: Add the clock ID to the new proc interface to make it
   useful.  The interface is new and should be functional when we reach
   the final 3.10 release.

 - Cure a false positive warning in the tick code introduced by the
   overhaul in 3.10

 - Fix for a persistent clock detection regression introduced in this
   cycle

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Correct run-time detection of persistent_clock.
  ntp: Remove unused variable flags in __hardpps
  posix-timers: Show clock ID in proc file
  tick: Cure broadcast false positive pending bit warning

Pull irqdomain bug fixes from Grant Likely:
 "This branch contains a set of straight forward bug fixes to the
  irqdomain code and to a couple of drivers that make use of it."

* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux:
  irqchip: Return -EPERM for reserved IRQs
  irqdomain: document the simple domain first_irq
  kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid.
  irqdomain: export irq_domain_add_simple

The irqdomain core will report a log message for any attempted map call
that fails unless the error code is -EPERM. This patch changes the
Versatile irq controller drivers to use -EPERM because it is normal for
a subset of the IRQ inputs to be marked as reserved on the various
Versatile platforms.
Signed-off-by: Grant Likely <grant.likely@linaro.org>

The first_irq needs to be zero to get a linear domain and that
comes with special semantics. We want to simplify this going
forward but some documentation never hurts.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@linaro.org>

Since irq_data may be NULL, if so, we WARN_ON(), and continue, 'hwirq'
which related with 'irq_data' has to initialize later, or it will cause
issue.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>

All other irq_domain_add_* functions are exported already, and apparently
this one got left out by mistake, which causes build errors for ARM
allmodconfig kernels:

ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-rcar.ko] undefined!
ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-em.ko] undefined!
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Grant Likely <grant.likely@linaro.org>

Pull ARM SoC fixes from Olof Johansson:
 "Another week, another batch of fixes for arm-soc platforms.

  Nothing controversial here, a handful of fixes for regressions and/or
  serious problems across several of the platforms.  Things are slowing
  down nicely on fix rates for 3.10"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: exynos: add debug_ll_io_init() call in exynos_init_io()
  ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is defined
  ARM: shmobile: sh73a0: Update CMT clockevent rating to 80
  sh-pfc: r8a7779: Don't group USB OVC and PENC pins
  ARM: mxs: icoll: Fix interrupts gpio bank 0
  ARM: imx: clk-imx6q: AXI clock select index is incorrect
  ARM: bcm2835: override the HW UART periphid
  ARM: mvebu: Fix bug in coherency fabric low level init function
  ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation
  ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3
  ARM: ux500: Only configure wake-up reasons on ux500 based platforms
  ARM: dts: imx: fix clocks for cspi
  ARM i.MX6q: fix for ldb_di_sels

Pull MIPS fixes from Ralf Baechle:
 "MIPS fixes across the field.  The only area that's standing out is the
  exception handling which received it's dose of breakage as part of the
  microMIPS patchset"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: ralink: add missing SZ_1M multiplier
  MIPS: Compat: Fix cputime_to_timeval() arguments in compat binfmt_elf.
  MIPS: OCTEON: Improve _machine_halt implementation.
  MIPS: rtlx: Fix implicit declaration of function set_vi_handler()
  MIPS: Trap exception handling fixes
  MIPS: Quit exposing Kconfig symbols in uapi headers.
  MIPS: Remove duplicate definition of check_for_high_segbits.

Pull m68knommu fix from Greg Ungerer:
 "A single fix for compilation breakage to many of the ColdFire CPU
  targets"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: only use local gpio_request_one if not using GPIOLIB

Pull drm fixes from Dave Airlie:
 "Regression fixers for the big 3:

   - nouveau: hdmi audio, dac load detect, s/r regressions fixed
   - radeon: long standing system hang fixed, hdmi audio and rs780 fast
     fb fixes
   - intel: one old regression, a WARN removal, and a stop X dying fix

  Otherwise one mgag200 fix, a couple of arm build fixes, and a core use
  after free fix."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nv50/kms: use dac loadval from vbios, where it's available
  drm/nv50/disp: force dac power state during load detect
  drm/nv50-nv84/fifo: fix resume regression introduced by playlist race fix
  drm/nv84/disp: Fix HDMI audio regression
  drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC.
  drm/radeon: don't allow audio on DCE6
  drm/radeon: Use direct mapping for fast fb access on RS780/RS880 (v2)
  radeon: Fix system hang issue when using KMS with older cards
  drm/i915: no lvds quirk for hp t5740
  drm/i915: Quirk the pipe A quirk in the modeset state checker
  drm/i915: Fix spurious -EIO/SIGBUS on wedged gpus
  drm/mgag200: Add missing write to index before accessing data register
  drm/nouveau: use mdelay instead of large udelay constants
  drm/tilcd: select BACKLIGHT_LCD_SUPPORT
  drm: fix a use-after-free when GPU acceleration disabled

Pull slave-dmaengine fixes from Vinod Koul:
 "Fix from Andy is for dmatest regression reported by Will and Rabin has
  fixed runtime ref counting for st_dma40"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmatest: do not allow to interrupt ongoing tests
  dmaengine: ste_dma40: fix pm runtime ref counting

Merge tag 'trace-fixes-v3.10-rc3-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "This contains 4 fixes.

  The first two fix the case where full RCU debugging is enabled,
  enabling function tracing causes a live lock of the system.  This is
  due to the added debug checks in rcu_dereference_raw() that is used by
  the function tracer.  These checks are also traced by the function
  tracer as well as cause enough overhead to the function tracer to slow
  down the system enough that the time to finish an interrupt can take
  longer than when the next interrupt is triggered, causing a live lock
  from the timer interrupt.

  Talking this over with Paul McKenney, we came up with a fix that adds
  a new rcu_dereference_raw_notrace() that does not perform these added
  checks, and let the function tracer use that.

  The third commit fixes a failed compile when branch tracing is
  enabled, due to the conversion of the trace_test_buffer() selftest
  that the branch trace wasn't converted for.

  The forth patch fixes a bug caught by the RCU lockdep code where a
  rcu_read_lock() is performed when rcu is disabled (either going to or
  from idle, or user space).  This happened on the irqsoff tracer as it
  calls task_uid().  The fix here was to use current_uid() when possible
  that doesn't use rcu locking.  Which luckily, is always used when
  irqsoff calls this code."

* tag 'trace-fixes-v3.10-rc3-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Use current_uid() for critical time tracing
  tracing: Fix bad parameter passed in branch selftest
  ftrace: Use the rcu _notrace variants for rcu_dereference_raw() and friends
  rcu: Add _notrace variation of rcu_dereference_raw() and hlist_for_each_entry_rcu()

Commit 9f29ab11 ("ACPI / scan: do not match drivers against objects
having scan handlers") introduced a boot regression on Tony's ia64 HP
rx2600.  Tony says:

  "It panics with the message:

   Kernel panic - not syncing: Unable to find SBA IOMMU: Try a generic or DIG kernel

   [...] my problem comes from arch/ia64/hp/common/sba_iommu.c
   where the code in sba_init() says:

        acpi_bus_register_driver(&acpi_sba_ioc_driver);
        if (!ioc_list) {

   but because of this change we never managed to call ioc_init()
   so ioc_list doesn't get set up, and we die."

Revert it to avoid this breakage and we'll fix the problem it attempted
to address later.
Reported-by: Tony Luck <tony.luck@gmail.com>
Cc: 3.9+ <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

From Shawn Guo, mxs fixes for 3.10:

- Since the time we move to MULTI_IRQ_HANDLER, the 0x7f polling for no
  interrupt in icoll_handle_irq() becomes insane, because 0x7f is an
  valid interrupt number, the irq of gpio bank 0.  That unnecessary
  polling results in the driver not detecting when irq 0x7f is active
  which makes the machine effectively dead lock.  The fix removes the
  interrupt poll loop and allows usage of gpio0 interrupt without an
  infinite loop.

* tag 'mxs-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mxs: icoll: Fix interrupts gpio bank 0
Signed-off-by: Olof Johansson <olof@lixom.net>

From Shawn Guo, imx fixes for 3.10, take 2:

- One device tree fix for all spi node to have per clock added.
  The clock is needed by spi driver to calculate bit rate divisor.
  The spi node in the current device trees either does not have the
  clock or is defined as dummy clock, in which case the driver probe
  will fail or spi will run at a wrong bit rate.

- Two imx6q clock fixes, which correct axi_sels and ldb_di_sels.

* tag 'imx-fixes-3.10-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx: clk-imx6q: AXI clock select index is incorrect
  ARM: dts: imx: fix clocks for cspi
  ARM i.MX6q: fix for ldb_di_sels
Signed-off-by: Olof Johansson <olof@lixom.net>

If the early MMU mapping of the UART happens to get booted out of the
TLB between the start of paging_init() and when we finally re-add the
UART at the very end of s3c_init_cpu(), we'll get a hang at bootup if
we've got early_printk enabled.  Avoid this hang by calling
debug_ll_io_init() early.

Without this patch, you can reliably reproduce a hang when early
printk is enabled by adding flush_tlb_all() at the start of
exynos_init_io().  After this patch the hang goes away.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-fixes-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

From Simon Horman, Renesas ARM based SoC fixes for v3.10:
- Correction to USB OVC and PENC pin groupings on r8a7779 SoC.
  This avoids conflicts when the USB_OVCn pins are used by another function.
  This has been observed to be a problem in v3.10-rc1.
- Update CMT clock rating for sh73a0 SoC to resolve boot failure
  on kzm9g-reference. This resolves a regression between v3.9 and v3.10-rc1.

* tag 'renesas-fixes-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: sh73a0: Update CMT clockevent rating to 80
  sh-pfc: r8a7779: Don't group USB OVC and PENC pins
Signed-off-by: Olof Johansson <olof@lixom.net>

Printing low-level debug messages make an assumption that the specified
UART port has been preconfigured by the bootloader. Incorrectly
specified UART port results in system getting stalled while printing the
message "Uncompressing Linux... done, booting the kernel"
This UART port number is specified through S3C_LOWLEVEL_UART_PORT. Since
the UART port might different for different board, it is not possible to
specify it correctly for every board that use a common defconfig file.

Calling this print subroutine only when DEBUG_LL fixes the problem. By
disabling DEBUG_LL in default config file, we would be able to boot
multiple boards with different default UART ports.

With this current approach, we miss the print "Uncompressing Linux...
done, booting the kernel." when DEBUG_LL is not defined.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>