On 64-bit, the startup_64_setup_env() function added in

  866b556e ("x86/head/64: Install startup GDT")

has stack protection enabled because of set_bringup_idt_handler().
This happens when CONFIG_STACKPROTECTOR_STRONG is enabled. It
also currently needs CONFIG_AMD_MEM_ENCRYPT enabled because then
set_bringup_idt_handler() is not an empty stub but that might change in
the future, when the other vendor adds their similar technology.

At this point, %gs is not yet initialized, and this doesn't cause a
crash only because the #PF handler from the decompressor stub is still
installed and handles the page fault.

Disable stack protection for the whole file, and do it on 32-bit as
well to avoid surprises.

 [ bp: Extend commit message with the exact explanation how it happens. ]
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20201008191623.2881677-6-nivedita@alum.mit.edu

Commit

  ca0e22d4 ("x86/boot/compressed/64: Always switch to own page table")

started using a new set of pagetables even without KASLR.

After that commit, initialize_identity_maps() is called before the
5-level paging variables are setup in choose_random_location(), which
will not work if 5-level paging is actually enabled.

Fix this by moving the initialization of __pgtable_l5_enabled,
pgdir_shift and ptrs_per_p4d into cleanup_trampoline(), which is called
immediately after the finalization of whether the kernel is executing
with 4- or 5-level paging. This will be earlier than anything that might
require those variables, and keeps the 4- vs 5-level paging code all in
one place.

Fixes: ca0e22d4 ("x86/boot/compressed/64: Always switch to own page table")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/20201010191110.4060905-1-nivedita@alum.mit.edu

Pull x86 SEV-ES support from Borislav Petkov:
 "SEV-ES enhances the current guest memory encryption support called SEV
  by also encrypting the guest register state, making the registers
  inaccessible to the hypervisor by en-/decrypting them on world
  switches. Thus, it adds additional protection to Linux guests against
  exfiltration, control flow and rollback attacks.

  With SEV-ES, the guest is in full control of what registers the
  hypervisor can access. This is provided by a guest-host exchange
  mechanism based on a new exception vector called VMM Communication
  Exception (#VC), a new instruction called VMGEXIT and a shared
  Guest-Host Communication Block which is a decrypted page shared
  between the guest and the hypervisor.

  Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest
  so in order for that exception mechanism to work, the early x86 init
  code needed to be made able to handle exceptions, which, in itself,
  brings a bunch of very nice cleanups and improvements to the early
  boot code like an early page fault handler, allowing for on-demand
  building of the identity mapping. With that, !KASLR configurations do
  not use the EFI page table anymore but switch to a kernel-controlled
  one.

  The main part of this series adds the support for that new exchange
  mechanism. The goal has been to keep this as much as possibly separate
  from the core x86 code by concentrating the machinery in two
  SEV-ES-specific files:

    arch/x86/kernel/sev-es-shared.c
    arch/x86/kernel/sev-es.c

  Other interaction with core x86 code has been kept at minimum and
  behind static keys to minimize the performance impact on !SEV-ES
  setups.

  Work by Joerg Roedel and Thomas Lendacky and others"

* tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
  x86/sev-es: Use GHCB accessor for setting the MMIO scratch buffer
  x86/sev-es: Check required CPU features for SEV-ES
  x86/efi: Add GHCB mappings when SEV-ES is active
  x86/sev-es: Handle NMI State
  x86/sev-es: Support CPU offline/online
  x86/head/64: Don't call verify_cpu() on starting APs
  x86/smpboot: Load TSS and getcpu GDT entry before loading IDT
  x86/realmode: Setup AP jump table
  x86/realmode: Add SEV-ES specific trampoline entry point
  x86/vmware: Add VMware-specific handling for VMMCALL under SEV-ES
  x86/kvm: Add KVM-specific VMMCALL handling under SEV-ES
  x86/paravirt: Allow hypervisor-specific VMMCALL handling under SEV-ES
  x86/sev-es: Handle #DB Events
  x86/sev-es: Handle #AC Events
  x86/sev-es: Handle VMMCALL Events
  x86/sev-es: Handle MWAIT/MWAITX Events
  x86/sev-es: Handle MONITOR/MONITORX Events
  x86/sev-es: Handle INVD Events
  x86/sev-es: Handle RDPMC Events
  x86/sev-es: Handle RDTSC(P) Events
  ...

Pull objtool updates from Ingo Molnar:
 "Most of the changes are cleanups and reorganization to make the
  objtool code more arch-agnostic. This is in preparation for non-x86
  support.

  Other changes:

   - KASAN fixes

   - Handle unreachable trap after call to noreturn functions better

   - Ignore unreachable fake jumps

   - Misc smaller fixes & cleanups"

* tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  perf build: Allow nested externs to enable BUILD_BUG() usage
  objtool: Allow nested externs to enable BUILD_BUG()
  objtool: Permit __kasan_check_{read,write} under UACCESS
  objtool: Ignore unreachable trap after call to noreturn functions
  objtool: Handle calling non-function symbols in other sections
  objtool: Ignore unreachable fake jumps
  objtool: Remove useless tests before save_reg()
  objtool: Decode unwind hint register depending on architecture
  objtool: Make unwind hint definitions available to other architectures
  objtool: Only include valid definitions depending on source file type
  objtool: Rename frame.h -> objtool.h
  objtool: Refactor jump table code to support other architectures
  objtool: Make relocation in alternative handling arch dependent
  objtool: Abstract alternative special case handling
  objtool: Move macros describing structures to arch-dependent code
  objtool: Make sync-check consider the target architecture
  objtool: Group headers to check in a single list
  objtool: Define 'struct orc_entry' only when needed
  objtool: Skip ORC entry creation for non-text sections
  objtool: Move ORC logic out of check()
  ...

Merge misc updates from Andrew Morton:
 "181 patches.

  Subsystems affected by this patch series: kbuild, scripts, ntfs,
  ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise,
  gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma,
  memory-failure, vmallo and migration)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (181 commits)
  mm/migrate: remove obsolete comment about device public
  mm/migrate: remove cpages-- in migrate_vma_finalize()
  mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary
  memblock: use separate iterators for memory and reserved regions
  memblock: implement for_each_reserved_mem_region() using __next_mem_region()
  memblock: remove unused memblock_mem_size()
  x86/setup: simplify reserve_crashkernel()
  x86/setup: simplify initrd relocation and reservation
  arch, drivers: replace for_each_membock() with for_each_mem_range()
  arch, mm: replace for_each_memblock() with for_each_mem_pfn_range()
  memblock: reduce number of parameters in for_each_mem_range()
  memblock: make memblock_debug and related functionality private
  memblock: make for_each_memblock_type() iterator private
  mircoblaze: drop unneeded NUMA and sparsemem initializations
  riscv: drop unneeded node initialization
  h8300, nds32, openrisc: simplify detection of memory extents
  arm64: numa: simplify dummy_numa_init()
  arm, xtensa: simplify initialization of high memory pages
  dma-contiguous: simplify cma_early_percent_memory()
  KVM: PPC: Book3S HV: simplify kvm_cma_reserve()
  ...

Device public memory never had an in tree consumer and was removed in
commit 25b2995a ("mm: remove MEMORY_DEVICE_PUBLIC support").  Delete
the obsolete comment.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20200827190735.12752-2-rcampbell@nvidia.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The variable struct migrate_vma->cpages is only used in
migrate_vma_setup().  There is no need to decrement it in
migrate_vma_finalize() since it is never checked.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20200827190735.12752-1-rcampbell@nvidia.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently __set_oom_adj loops through all processes in the system to keep
oom_score_adj and oom_score_adj_min in sync between processes sharing
their mm.  This is done for any task with more that one mm_users, which
includes processes with multiple threads (sharing mm and signals).
However for such processes the loop is unnecessary because their signal
structure is shared as well.

Android updates oom_score_adj whenever a tasks changes its role
(background/foreground/...) or binds to/unbinds from a service, making it
more/less important.  Such operation can happen frequently.  We noticed
that updates to oom_score_adj became more expensive and after further
investigation found out that the patch mentioned in "Fixes" introduced a
regression.  Using Pixel 4 with a typical Android workload, write time to
oom_score_adj increased from ~3.57us to ~362us.  Moreover this regression
linearly depends on the number of multi-threaded processes running on the
system.

Mark the mm with a new MMF_MULTIPROCESS flag bit when task is created with
(CLONE_VM && !CLONE_THREAD && !CLONE_VFORK).  Change __set_oom_adj to use
MMF_MULTIPROCESS instead of mm_users to decide whether oom_score_adj
update should be synchronized between multiple processes.  To prevent
races between clone() and __set_oom_adj(), when oom_score_adj of the
process being cloned might be modified from userspace, we use
oom_adj_mutex.  Its scope is changed to global.

The combination of (CLONE_VM && !CLONE_THREAD) is rarely used except for
the case of vfork().  To prevent performance regressions of vfork(), we
skip taking oom_adj_mutex and setting MMF_MULTIPROCESS when CLONE_VFORK is
specified.  Clearing the MMF_MULTIPROCESS flag (when the last process
sharing the mm exits) is left out of this patch to keep it simple and
because it is believed that this threading model is rare.  Should there
ever be a need for optimizing that case as well, it can be done by hooking
into the exit path, likely following the mm_update_next_owner pattern.

With the combination of (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK) being
quite rare, the regression is gone after the change is applied.

[surenb@google.com: v3]
  Link: https://lkml.kernel.org/r/20200902012558.2335613-1-surenb@google.com

Fixes: 44a70ade ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj")
Reported-by: Tim Murray <timmurray@google.com>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Christian Kellner <christian@kellner.me>
Cc: Adrian Reber <areber@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: https://lkml.kernel.org/r/20200824153036.3201505-1-surenb@google.comDebugged-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

for_each_memblock() is used to iterate over memblock.memory in a few
places that use data from memblock_region rather than the memory ranges.

Introduce separate for_each_mem_region() and
for_each_reserved_mem_region() to improve encapsulation of memblock
internals from its users.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>			[x86]
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>	[MIPS]
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>	[.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-18-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Iteration over memblock.reserved with for_each_reserved_mem_region() used
__next_reserved_mem_region() that implemented a subset of
__next_mem_region().

Use __for_each_mem_range() and, essentially, __next_mem_region() with
appropriate parameters to reduce code duplication.

While on it, rename for_each_reserved_mem_region() to
for_each_reserved_mem_range() for consistency.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>	[.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-17-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The only user of memblock_mem_size() was x86 setup code, it is gone now
and memblock_mem_size() funciton can be removed.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-16-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* Replace magic numbers with defines
* Replace memblock_find_in_range() + memblock_reserve() with
  memblock_phys_alloc_range()
* Stop checking for low memory size in reserve_crashkernel_low(). The
  allocation from limited range will anyway fail if there is no enough
  memory, so there is no need for extra traversal of memblock.memory
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-15-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, initrd image is reserved very early during setup and then it
might be relocated and re-reserved after the initial physical memory
mapping is created.  The "late" reservation of memblock verifies that
mapped memory size exceeds the size of initrd, then checks whether the
relocation required and, if yes, relocates inirtd to a new memory
allocated from memblock and frees the old location.

The check for memory size is excessive as memblock allocation will anyway
fail if there is not enough memory.  Besides, there is no point to
allocate memory from memblock using memblock_find_in_range() +
memblock_reserve() when there exists memblock_phys_alloc_range() with
required functionality.

Remove the redundant check and simplify memblock allocation.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-14-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are several occurrences of the following pattern:

	for_each_memblock(memory, reg) {
		start = __pfn_to_phys(memblock_region_memory_base_pfn(reg);
		end = __pfn_to_phys(memblock_region_memory_end_pfn(reg));

		/* do something with start and end */
	}

Using for_each_mem_range() iterator is more appropriate in such cases and
allows simpler and cleaner code.

[akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build]
[rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring]
  Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.comSigned-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are several occurrences of the following pattern:

	for_each_memblock(memory, reg) {
		start_pfn = memblock_region_memory_base_pfn(reg);
		end_pfn = memblock_region_memory_end_pfn(reg);

		/* do something with start_pfn and end_pfn */
	}

Rather than iterate over all memblock.memory regions and each time query
for their start and end PFNs, use for_each_mem_pfn_range() iterator to get
simpler and clearer code.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>	[.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-12-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently for_each_mem_range() and for_each_mem_range_rev() iterators are
the most generic way to traverse memblock regions.  As such, they have 8
parameters and they are hardly convenient to users.  Most users choose to
utilize one of their wrappers and the only user that actually needs most
of the parameters is memblock itself.

To avoid yet another naming for memblock iterators, rename the existing
for_each_mem_range[_rev]() to __for_each_mem_range[_rev]() and add a new
for_each_mem_range[_rev]() wrappers with only index, start and end
parameters.

The new wrapper nicely fits into init_unavailable_mem() and will be used
in upcoming changes to simplify memblock traversals.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>	[MIPS]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-11-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The only user of memblock_dbg() outside memblock was s390 setup code and
it is converted to use pr_debug() instead.  This allows to stop exposing
memblock_debug and memblock_dbg() to the rest of the kernel.

[akpm@linux-foundation.org: make memblock_dbg() safer and neater]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-10-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

for_each_memblock_type() is not used outside mm/memblock.c, move it there
from include/linux/memblock.h
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-9-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

microblaze does not support neither NUMA not SPARSMEM, so there is no
point to call memblock_set_node() and
sparse_memory_present_with_active_regions() functions during microblaze
memory initialization.

Remove these calls and the surrounding code.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-8-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RISC-V does not (yet) support NUMA and for UMA architectures node 0 is
used implicitly during early memory initialization.

There is no need to call memblock_set_node(), remove this call and the
surrounding code.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-7-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Instead of traversing memblock.memory regions to find memory_start and
memory_end, simply query memblock_{start,end}_of_DRAM().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Stafford Horne <shorne@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-6-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dummy_numa_init() loops over memblock.memory and passes nid=0 to
numa_add_memblk() which essentially wraps memblock_set_node().  However,
memblock_set_node() can cope with entire memory span itself, so the loop
over memblock.memory regions is redundant.

Using a single call to memblock_set_node() rather than a loop also fixes
an issue with a buggy ACPI firmware in which the SRAT table covers some
but not all of the memory in the EFI memory map.

Jonathan Cameron says:

  This issue can be easily triggered by having an SRAT table which fails
  to cover all elements of the EFI memory map.

  This firmware error is detected and a warning printed. e.g.
  "NUMA: Warning: invalid memblk node 64 [mem 0x240000000-0x27fffffff]"
  At that point we fall back to dummy_numa_init().

  However, the failed ACPI init has left us with our memblocks all broken
  up as we split them when trying to assign them to NUMA nodes.

  We then iterate over the memblocks and add them to node 0.

  numa_add_memblk() calls memblock_set_node() which merges regions that
  were previously split up during the earlier attempt to add them to
  different nodes during parsing of SRAT.

  This means elements are moved in the memblock array and we can end up
  in a different memblock after the call to numa_add_memblk().
  Result is:

  Unable to handle kernel paging request at virtual address 0000000000003a40
  Mem abort info:
    ESR = 0x96000004
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000004
    CM = 0, WnR = 0
  [0000000000003a40] user address but active_mm is swapper
  Internal error: Oops: 96000004 [#1] PREEMPT SMP

  ...

  Call trace:
    sparse_init_nid+0x5c/0x2b0
    sparse_init+0x138/0x170
    bootmem_init+0x80/0xe0
    setup_arch+0x2a0/0x5fc
    start_kernel+0x8c/0x648

Replace the loop with a single call to memblock_set_node() to the entire
memory.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-5-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

free_highpages() in both arm and xtensa essentially open-code
for_each_free_mem_range() loop to detect high memory pages that were not
reserved and that should be initialized and passed to the buddy allocator.

Replace open-coded implementation of for_each_free_mem_range() with usage
of memblock API to simplify the code.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>	[xtensa]
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>	[xtensa]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-4-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The memory size calculation in cma_early_percent_memory() traverses
memblock.memory rather than simply call memblock_phys_mem_size().  The
comment in that function suggests that at some point there should have
been call to memblock_analyze() before memblock_phys_mem_size() could be
used.  As of now, there is no memblock_analyze() at all and
memblock_phys_mem_size() can be used as soon as cold-plug memory is
registered with memblock.

Replace loop over memblock.memory with a call to memblock_phys_mem_size().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-3-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "memblock: seasonal cleaning^w cleanup", v3.

These patches simplify several uses of memblock iterators and hide some of
the memblock implementation details from the rest of the system.

This patch (of 17):

The memory size calculation in kvm_cma_reserve() traverses memblock.memory
rather than simply call memblock_phys_mem_size().  The comment in that
function suggests that at some point there should have been call to
memblock_analyze() before memblock_phys_mem_size() could be used.  As of
now, there is no memblock_analyze() at all and memblock_phys_mem_size()
can be used as soon as cold-plug memory is registered with memblock.

Replace loop over memblock.memory with a call to memblock_phys_mem_size().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lkml.kernel.org/r/20200818151634.14343-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20200818151634.14343-2-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add else to split mutually exclusive case and avoid some unnecessary check.
It doesn't seem to change code generation (compiler is smart), but I think
it helps readability.

[akpm@linux-foundation.org: fix comment location]
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200924111641.28922-1-linmiaohe@huawei.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

No one use this macro anymore.

Also fix code style of policy_node().
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200921021401.84508-1-richard.weiyang@linux.alibaba.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It is not necessary to hold the lock of current when setting nodemask of
a new policy.
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200921040416.86185-1-richard.weiyang@linux.alibaba.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch reduces the running time for compaction_test from about 27 sec,
to 3.3 sec, which is about an 8x speedup.

These numbers are for an Intel x86_64 system with 32 GB of DRAM.

The compaction_test.c program was spending most of its time doing mmap(),
1 MB at a time, on about 25 GB of memory.

Instead, do the mmaps 100 MB at a time.  (Going past 100 MB doesn't make
things go much faster, because other parts of the program are using the
remaining time.)
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sri Jayaramappa <sjayaram@akamai.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Link: https://lkml.kernel.org/r/20201002080621.551044-2-jhubbard@nvidia.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The enum value 'COMPACT_INACTIVE' is never used so can be removed.
Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200917110750.12015-1-mateusznosek0@gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The same code can work both for 'zone->compact_considered > defer_limit'
and 'zone->compact_considered >= defer_limit'.  In the latter there is one
branch less which is more effective considering performance.
Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Link: https://lkml.kernel.org/r/20200913190448.28649-1-mateusznosek0@gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zhdr is already initialized in the front of the function, so remove
redundant initialization here.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Link: https://lkml.kernel.org/r/1600419885-191907-1-git-send-email-chenxiang66@hisilicon.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alloc_slots() allocates memory for slots using kmem_cache_alloc(), then
memsets it.  We can just use kmem_cache_zalloc().
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200926100834.GA184671@rlkSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix comments for isolate_lru_page():
s/fundamentnal/fundamental
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200927173923.GA8058@rlkSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We have observed that drop_caches can take a considerable amount of
time (<put data here>).  Especially when there are many memcgs involved
because they are adding an additional overhead.

It is quite unfortunate that the operation cannot be interrupted by a
signal currently.  Add a check for fatal signals into the main loop so
that userspace can control early bailout.

There are two reasons:

1. We have too many memcgs, even though one object freed in one memcg,
   the sum of object is bigger than 10.

2. We spend a lot of time in traverse memcg once.  So, the memcg who
   traversed at the first have been freed many objects.  Traverse memcg
   next time, the freed count bigger than 10 again.

We can get the following info through 'ps':

  root:~# ps -aux | grep drop
  root  357956 ... R    Aug25 21119854:55 echo 3 > /proc/sys/vm/drop_caches
  root 1771385 ... R    Aug16 21146421:17 echo 3 > /proc/sys/vm/drop_caches
  root 1986319 ... R    18:56 117:27 echo 3 > /proc/sys/vm/drop_caches
  root 2002148 ... R    Aug24 5720:39 echo 3 > /proc/sys/vm/drop_caches
  root 2564666 ... R    18:59 113:58 echo 3 > /proc/sys/vm/drop_caches
  root 2639347 ... R    Sep03 2383:39 echo 3 > /proc/sys/vm/drop_caches
  root 3904747 ... R    03:35 993:31 echo 3 > /proc/sys/vm/drop_caches
  root 4016780 ... R    Aug21 7882:18 echo 3 > /proc/sys/vm/drop_caches

Use bpftrace follow 'freed' value in drop_slab_node:

  root:~# bpftrace -e 'kprobe:drop_slab_node+70 {@ret=hist(reg("bp")); }'
  Attaching 1 probe...
  ^B^C

  @ret:
  [64, 128)        1 |                                                    |
  [128, 256)      28 |                                                    |
  [256, 512)     107 |@                                                   |
  [512, 1K)      298 |@@@                                                 |
  [1K, 2K)       613 |@@@@@@@                                             |
  [2K, 4K)      4435 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
  [4K, 8K)       442 |@@@@@                                               |
  [8K, 16K)      299 |@@@                                                 |
  [16K, 32K)     100 |@                                                   |
  [32K, 64K)     139 |@                                                   |
  [64K, 128K)     56 |                                                    |
  [128K, 256K)    26 |                                                    |
  [256K, 512K)     2 |                                                    |

In the while loop, we can check whether the TASK_KILLABLE signal is set,
if so, we should break the loop.
Signed-off-by: Chunxin Zang <zangchunxin@bytedance.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Link: https://lkml.kernel.org/r/20200909152047.27905-1-zangchunxin@bytedance.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As a debugging aid, huge_pmd_share should make sure i_mmap_rwsem is held
if necessary.  To clarify the 'if necessary', expand the comment block at
the beginning of huge_pmd_share.

No functional change.  The added i_mmap_assert_locked() call is only
enabled if CONFIG_LOCKDEP.

Ideally, this should have been included with commit 34ae204f
("hugetlbfs: remove call to huge_pte_alloc without i_mmap_rwsem").
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lkml.kernel.org/r/20200911201248.88537-1-mike.kravetz@oracle.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Function dequeue_huge_page_node_exact() iterates the free list and return
the first valid free hpage.

Instead of break and check the loop variant, we could return in the loop
directly.  This could reduce some redundant check.

[mike.kravetz@oracle.com: points out a logic error]
[richard.weiyang@linux.alibaba.com: v4]
  Link: https://lkml.kernel.org/r/20200901014636.29737-8-richard.weiyang@linux.alibaba.comSigned-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lkml.kernel.org/r/20200831022351.20916-8-richard.weiyang@linux.alibaba.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

set_hugetlb_cgroup_[rsvd] just manipulate page local data, which is not
necessary to be protected by hugetlb_lock.

Let's take this out.
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lkml.kernel.org/r/20200831022351.20916-7-richard.weiyang@linux.alibaba.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The page allocated from buddy is not on any list, so just use list_add()
is enough.
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lkml.kernel.org/r/20200831022351.20916-6-richard.weiyang@linux.alibaba.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are only two cases of function add_reservation_in_range()

    * count file_region and return the number in regions_needed
    * do the real list operation without counting

This means it is not necessary to have two parameters to classify these
two cases.

Just use regions_needed to separate them.
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lkml.kernel.org/r/20200831022351.20916-5-richard.weiyang@linux.alibaba.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>