We should only care about checking the attributes if the page cache
is marked as dubious (using NFS_INO_REVAL_PAGECACHE) and the
NFS_INO_REVAL_FORCED flag is set.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Add the ability to send an array of layoutstats entries as part of
layoutreturn.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Need to lock while reading in order to ensure 64-bit reads are correct.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Add the layout error payload to the flexfiles layoutreturn private
data, and set up the encoding mechanisms. This is a refactoring in
preparation for adding the layout iostats payload.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Add a callback to allow the flexfiles layout driver to initialise the
layout private payload.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Cleanup to allow layout drivers to attach private data to layoutreturn,
and manage the data.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

If there have been no reads or writes to a given mirror since the last
layoutstats update, then don't resend the same data.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

If the list of mirrors is empty, then don't send an RPC call.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

If the use called stat() on an 'ls -l' workload, and the attribute
cache was successfully revalidate by READDIRPLUS, then we want to
report that back so that the readdir code continues to use
readdirplus.
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

There is little point in setting NFS_INO_ADVISE_RDPLUS in nfs_lookup and
nfs_lookup_revalidate() unless a process is actually doing readdir on the
parent directory.
Furthermore, there is little point in using readdirplus if we're trying
to revalidate a negative dentry.
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Ben Coddington reports that commit 311324ad, by adding the function
nfs_dir_mapping_need_revalidate() that checks page cache validity on
each call to nfs_readdir() causes a performance regression when
the directory is being modified.

If the directory is changing while we're iterating through the directory,
POSIX does not require us to invalidate the page cache unless the user
calls rewinddir(). However, we still do want to ensure that we use
readdirplus in order to avoid a load of stat() calls when the user
is doing an 'ls -l' workload.

The fix should be to invalidate the page cache immediately when we're
setting the NFS_INO_ADVISE_RDPLUS bit.
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: 311324ad ("NFS: Be more aggressive in using readdirplus...")
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Fix typo in parameter description.

Fixes: 5405fc44 ("NFSv4.x: Add kernel parameter to control the
callback server")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

It now has only one field and is only used in one structure.
So replaced it in that structure by the field it contains.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

A process can have two possible lock owner for a given open file:
a per-process Posix lock owner and a per-open-file flock owner
Use both of these when searching for a suitable stateid to use.

With this patch, READ/WRITE requests will use the correct stateid
if a flock lock is active.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

The only time that a lock_context is not immediately available is in
setattr, and now that it has an open_context, it can easily find one
with nfs_get_lock_context.
This removes the need for the on-stack nfs_lockowner.

This change is preparation for correctly support flock stateids.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

The open_context can always lead directly to the state, and is always easily
available, so this is a straightforward change.
Doing this makes more information available to _nfs4_do_setattr() for use
in the next patch.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

An open file description (struct file) in a given process can be
associated with two different lock owners.

It can have a Posix lock owner which will be different in each process
that has a fd on the file.
It can have a Flock owner which will be the same in all processes.

When searching for a lock stateid to use, we need to consider both of these
owners

So add a new "flock_owner" to the "nfs_open_context" (of which there
is one for each open file description).

This flock_owner does not need to be reference-counted as there is a
1-1 relation between 'struct file' and nfs open contexts,
and it will never be part of a list of contexts.  So there is no need
for a 'flock_context' - just the owner is enough.

The io_count included in the (Posix) lock_context provides no
guarantee that all read-aheads that could use the state have
completed, so not supporting it for flock locks in not a serious
problem.  Synchronization between flock and read-ahead can be added
later if needed.

When creating an open_context for a non-openning create call, we don't have
a 'struct file' to pass in, so the lock context gets initialized with
a NULL owner, but this will never be used.

The flock_owner is not used at all in this patch, that will come later.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

this field is not used in any important way and probably should
have been removed by

Commit: 8003d3c4 ("nfs4: treat lock owners as opaque values")

which removed the pid argument from nfs4_get_lock_state.

Except in unusual and uninteresting cases, two threads with the same
->tgid will have the same ->files pointer, so keeping them both
for comparison brings no benefit.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

This parameter hasn't been used since 2a009ec9 (Linux 3.13-rc3), so
let's remove it from this function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

This parameter hasn't been used since f8407299 (Linux 3.11-rc2), so
let's remove it from this function and callers.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

It's possible that two different servers can return the same (clientid,
verifier) pair purely by coincidence.  Both are 64-bit values, but
depending on the server implementation, they can be highly predictable
and collisions may be quite likely, especially when there are lots of
servers.

So, check for this case.  If the clientid and verifier both match, then
we actually know they *can't* be the same server, since a new
SETCLIENTID to an already-known server should have changed the verifier.

This helps fix a bug that could cause the client to mount a filesystem
from the wrong server.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Tested-by: Yongcheng Yang <yoyang@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

xs_connect() contains an exponential backoff mechanism so the repeated
connection attempts are delayed by longer and longer amounts.

This is appropriate when the connection failed due to a timeout, but
it not appropriate when a definitive "no" answer is received.  In such
cases, call_connect_status() imposes a minimum 3-second back-off, so
not having the exponetial back-off will never result in immediate
retries.

The current situation is a problem when the NFS server tries to
register with rpcbind but rpcbind isn't running.  All connection
attempts are made on the same "xprt" and as the connection is never
"closed", the exponential back delays successive attempts to register,
or de-register, different protocols.  This results in a multi-minute
delay with no benefit.

So, when call_connect_status() receives a definitive "no", use
xprt_conditional_disconnect() to cancel the previous connection attempt.
This will set XPRT_CLOSE_WAIT so that xprt->ops->close() calls xs_close()
which resets the reestablish_timeout.

To ensure xprt_conditional_disconnect() does the right thing, we
ensure that rq_connect_cookie is set before a connection attempt, and
allow xprt_conditional_disconnect() to complete even when the
transport is not fully connected.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

If the layout stateid is already invalid, we have no work to do.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Address another memory leak.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Ensure that the layout state bits are synced when we cache a layout
segment for layoutreturn using an appropriate call to
pnfs_set_plh_return_info.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

We need to honour the NFS_LAYOUT_RETURN_REQUESTED bit regardless of
whether or not there are layout segments pending.
Furthermore, we should ensure that we leave the plh_return_segs list
empty.

This patch fixes a memory leak of the layout segments on plh_return_segs.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

When the layout state is invalidated, then so is the layout segment
state, and hence we do need to clean up the state bits.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

If we cannot grab the inode or superblock, then we cannot pin the
layout header, and so we cannot send a layoutreturn as part of an
async delegreturn call. In this case, we currently end up sending
an extra layoutreturn after the delegreturn. Since the layout was
implicitly returned by the delegreturn, that just gets a BAD_STATEID.

The fix is to simply complete the return-on-close immediately.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Amend the pnfs return on close helper functions to enable sending the
layoutreturn op in CLOSE/DELEGRETURN. This closes a potential race between
CLOSE/DELEGRETURN and parallel OPEN calls to the same file, and allows the
client and the server to agree on whether or not there is an outstanding
layout.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Add XDR encoding for the layoutreturn op, and storage for the layoutreturn
arguments to the DELEGRETURN compound.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Add XDR encoding for the layoutreturn op, and storage for the layoutreturn
arguments to the CLOSE compound.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

We need to account for the reply to the PUTFH operation in the
DELEGRETURN compound.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

The layoutreturn call will take care of invalidating the layout segments
once the call is successful.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

The parameter is already present in the "args" structure.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>