- 23 Feb, 2011 7 commits
-
-
Luis R. Rodriguez authored
This updates the TODO file to reflect new changes on development. Cc: Joe Perches <joe@perches.com> Cc: Naveen Singh <nsingh@atheros.com> Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
Lots of little ones all through the driver, mostly all in a cut-and-paste header comment. Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: -
Greg Kroah-Hartman authored
The mod.c file should not be part of the repo. Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: -
Alan Cox authored
This is an initial staging driver for the GMA500. It's been stripped out of the PVR drivers and crunched together from various bits of code and different kernels. Currently it's unaccelerated but still pretty snappy even compositing with the frame buffer X server. Lots of work is needed to rework the ttm and bo interfaces from being ripped out and then 2D acceleration wants putting back for framebuffer and somehow eventually via DRM. There is no support for the parts without open source userspace (video accelerators, 3D) as per kernel policy. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Joe Perches authored
Allow more const declarations. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Haiyang Zhang authored
In a previous commit, 7a09876d, ASSERT was changed to WARN_ON, but the condition wasn't updated. This patch fixed this error. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Hank Janssen <hjanssen@microsoft.com> Signed-off-by:
-
Haiyang Zhang authored
These fields have been assigned in netvsc_drv_init() before calling netvsc_initialize(), so there is no need to check them. The ASSERTs were already commented out, and this patch removes them. Signed-off-by:
-
- 18 Feb, 2011 33 commits
-
-
Uwe Kleine-König authored
Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Vipin Mehta authored
When jiffies wrap-over, all the BSS in the cache is removed. Wrap-over of jiffies is not handled in the correct way. This cause the scan list to go empty during this time for a small duration Signed-off-by:
Vipin Mehta <vmehta@atheros.com> Signed-off-by:
-
Vipin Mehta authored
Fixing the code to avoid overwriting of the first index in the probed ssid list maintained by the hardware. This index is used to store broadcast SSID. Signed-off-by:
-
Vipin Mehta authored
Adding state in driver to track the sme state. The connect/disconnect events from the driver were messing up the state maintained within the cfg80211 module. Signed-off-by:
-
Vipin Mehta authored
Fixing the cached copy of the BSS filter set by user. Signed-off-by:
-
Vipin Mehta authored
The patch fixes a mismatch in the allocation and free of scatter HIF bus requests in the suspend/resume path. Signed-off-by:
-
Vipin Mehta authored
Adding host side interface to configure the excessive TX retry threshold. It is used by the target to determine disconnection triggers. Additionally, some definitions have been added to header file wmi.h to bridge the gap for the newly added command. Signed-off-by:
-
Vipin Mehta authored
Fix for a memory leak discovered during suspend/resume testing. Signed-off-by:
-
Vipin Mehta authored
Virtual Scatter Gather Lists not getting freed during the HTCStop(). The patch adds some clean up code in the code path. Signed-off-by:
-
Vipin Mehta authored
Adding compile time support for enabling/disabling txop bursting. Signed-off-by:
-
Vipin Mehta authored
Move all the wmi configuration commands done after wmi_ready to a single function. Signed-off-by:
-
Vipin Mehta authored
Fixing the driver initialization for manufacturing mode that involves downloading a firmware binary meant for RF tests on the factory floor. Signed-off-by:
-
Vipin Mehta authored
Firmware design requires a WMI_DISCONNECT_CMD for every WMI_CONNECT_CMD to clear the firmware previous profile state. There is one case in linux host driver where two WMI_CONNECT_CMD are given without a WMI_DISCONNECT_CMD. This causes firmware state to mismatch causing an ASSERT. Use the driver state variable arConnectPending to track whether a WMI_CONNECT_CMD is issued to firmware. Signed-off-by:
-
Vipin Mehta authored
Return correct scan complete status to the cfg80211 module based on the value returned from the hardware. Signed-off-by:
-
Vipin Mehta authored
A bug was observed during the reconnection phase in the WPA/WPA2-PSK scenario where the EAPOL frames were going encrypted during an auto reconnection attempt. The initial 4-way handshake would go fine but then the driver was getting a command to set default keys sometime later. Setting of an incorrect flag (TX_USAGE) in the hadrware was causing the EAPOL frames during the subsequent 4-way handshake attempts to go encrypted causing the AP to reject the station. Signed-off-by:
-
Vipin Mehta authored
The driver was dereferencing a NULL pointer because of the device instance being registered via the set_wiphy_dev() function. The function ar6000_avail_ev() was passing the argument as NULL instead of using the one returned by the MMC stack through the probe callback. Signed-off-by:
-
Jerome Marchand authored
Currently the device is initialized when first write is done to the device. Any read attempt before the first write would fail, including "hidden" read the user may not know about (as for example if he tries to write a partial block). This patch initializes the device on first request, whether read or write. Signed-off-by:
Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by:
-
Vasiliy Kulikov authored
obj is not freed if __get_free_page() failed. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Signed-off-by:
-
Jonathan Cameron authored
Get rid of unused stubs for trigger and buffer support. Fix line length issues. Signed-off-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Removed stubs related to buffering and triggering. Put them back when they are actually needed. Fixed line length issues. Made a number of functions static as no longer in header. Signed-off-by:
-
Jonathan Cameron authored
General cleanup and use of standard functions to simplfy some spi reads as well. Also added a device id table to the spi version. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Jonathan Cameron authored
General cleanup and use of standard functions to simplfy some spi reads as well. Signed-off-by:
-
