In one of the error paths of the for_each_child_of_node loop in
tlc591xx_probe, add missing call to of_node_put.

Fixes: 1ab4531a ("leds: tlc591xx: simplify driver by using the managed led API")
Signed-off-by: Tobias Jordan <kernel@cdqe.de>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.

Previously if the `label` DT property was not present, the code composed
name for the LED in the form
  "pca963x:%d:%.2x:%u"
For backwards compatibility we therefore set init_data->default_label
to this value so that the LED will not get a different name if `label`
property is not present, nor are `color` and `function`.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Peter Meerwald <p.meerwald@bct-electronic.com>
Cc: Ricardo Ribalda <ribalda@kernel.org>
Cc: Zahari Petkov <zahari@balena.io>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Register LEDs immediately after parsing their properties.
This allows us to get rid of platdata, and since no one in tree uses
header linux/platform_data/leds-pca963x.h, remove it.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Peter Meerwald <p.meerwald@bct-electronic.com>
Cc: Ricardo Ribalda <ribalda@kernel.org>
Cc: Zahari Petkov <zahari@balena.io>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Remove the binding comment at the beginning. The information for
platdata is now obsolete and DT binding is documented in device-tree
bindings.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: NeilBrown <neilb@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Use helper variable dev instead of always writing &client->dev.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: NeilBrown <neilb@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Do not set GPIO names. Let gpiolib determine GPIO names from the DT
property `gpio-line-names`.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: NeilBrown <neilb@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

This converts the tca6507 LED binding to yaml.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: NeilBrown <neilb@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Some machines have thousands of CPUs... and trigger mechanisms was not
really meant for thousands of triggers. I doubt anyone uses this
trigger on many-CPU machine; but if they do, they'll need to do it
properly.
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Help welcome :-).
Signed-off-by: Pavel Machek <pavel@ucw.cz>

While the two pca9532 pwms can be configured in the platform data
struct, there was no corresponding dt binding. Users need to configure
the pwm if some leds should blink or continue blinking during boot.
Signed-off-by: Markus Moll <mmoll@de.pepperl-fuchs.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Each led setting occupies two bits in a corresponding led register.
Accessing these bits requires shifting and masking, which was
implemented incorrectly in pca9532_getled. Two new helper macros
concentrate the computation of those masks in one place.
Signed-off-by: Markus Moll <mmoll@de.pepperl-fuchs.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Fix warnings for undefined parameters when building with W=1.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Fix warnings for undefined parameters when W=1 is used.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Instead of doing two allocations, allocate only once, by utilizing
flexible array members.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Peter Meerwald <p.meerwald@bct-electronic.com>
Cc: Ricardo Ribalda <ribalda@kernel.org>
Cc: Zahari Petkov <zahari@balena.io>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Rename variable of type struct pca963x_led from pca963x to simple led.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Peter Meerwald <p.meerwald@bct-electronic.com>
Cc: Ricardo Ribalda <ribalda@kernel.org>
Cc: Zahari Petkov <zahari@balena.io>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Rename variables chip and pca963x_chip to chipdef and chip,
respectively, so that their names correspond to the names of their
types.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Peter Meerwald <p.meerwald@bct-electronic.com>
Cc: Ricardo Ribalda <ribalda@kernel.org>
Cc: Zahari Petkov <zahari@balena.io>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

By using devres version of LED registering function we can remove the
.remove method from this driver. The probe method also gets simpler.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Peter Meerwald <p.meerwald@bct-electronic.com>
Cc: Ricardo Ribalda <ribalda@kernel.org>
Cc: Zahari Petkov <zahari@balena.io>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Use helper variables: instead of writing &client->dev at many places,
write only dev. The same with pca963x->chip->chipdef,
pca963x->chip->client).

Use helper variable u8 val for i2c_smbus_write_byte_data, for better
indentation.

Indent better on various places.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Peter Meerwald <p.meerwald@bct-electronic.com>
Cc: Ricardo Ribalda <ribalda@kernel.org>
Cc: Zahari Petkov <zahari@balena.io>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Fix potential ERR_PTR(0).
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: d78b10f5713d9 ("leds: tca6507: use fwnode API instead of OF")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Robot complains about:

All warnings (new ones prefixed by >>):

>> drivers/leds/leds-tca6507.c:750:34: warning: unused variable
   'of_tca6507_leds_match'    [-Wunused-const-variable]
      static const struct of_device_id of_tca6507_leds_match[] = {

Fix it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Convert to use fwnode API instead of OF. It is more generic and if
someone wants to use this driver without device-tree yet still, they
will be able to via swnode fwnodes.

Remove the gpio setup function from platdata.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: NeilBrown <neilb@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

The only in-tree usage of this driver is via device-tree. No on else
includes linux/leds-tca6507.h, so absorb the definition of platdata
structure.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: NeilBrown <neilb@suse.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Do the parsing of `linux,default-trigger` DT property to LED core.
Currently it is done in many different drivers and the code is repeated.

This patch removes the parsing from 23 drivers:
  an30259a, aw2013, bcm6328, bcm6358, cr0014114, el15203000, gpio,
  is31fl32xx, lm3532, lm36274, lm3692x, lm3697, lp50xx, lp8860, lt3593,
  max77650, mt6323, ns2, pm8058, pwm, syscon, tlc591xx and turris-omnia.

There is one driver in drivers/input which parses this property on it's
own. I shall send a separate patch there after this is applied.

There are still 8 drivers that parse this property on their own because
they do not pass the led_init_data structure to the registering
function. I will try to refactor those in the future.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

This driver uses extended LED registration, so we do not need to parse
the `label` DT property on our own.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Now that the potential use-after-free issue is resolved we can use
devres for LED registration in this driver.

By using devres version of LED registering function we can remove the
.remove method from this driver.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Tested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Instead of registering LED under the MFD device, this driver sets the
parent of the LED it is registering to the parent of the MFD device (the
I2C client device).

Because of this we cannot use devres for LED registration, since it can
result in use-after-free, see commit
a0972fff ("leds: lm36274: fix use-after-free on unbind").

The only other in-tree driver that also registers under the MFD device
(drivers/regulator/lm363x-regulator.c) sets the parent to the MFD
device.

Set the parent of this LED to the MFD device, instead of the I2C client
device.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Tested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

These settings are not parsed from DT and therefore semantically should
not be set in function with a name lm36274_parse_dt.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Tested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.

Previously if the `label` DT property was not present, the code composed
name for the LED in the form
  "parent_name::"
For backwards compatibility we therefore set
  init_data->default_label = ":";
so that the LED will not get a different name if `label` property is not
present, nor are `color` and `function`.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Tested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Do not use device_for_each_child_node. Since this driver works only with
once child node present, use device_get_next_child_node instead.
This also saves one level of indentation.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Tested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Rename this variable so that it is easier to read and easier to write in
80 columns. Also rename variable of this type in lm36274_brightness_set
from led to chip, to be consistent.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Tested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Acer Iconia Tab A500 is an Android tablet device which has two LEDs
embedded into the Power Button. Orange LED indicates "battery charging"
status and white LED indicates "wake-up/charge-done" status. The new LED
driver provides control over both LEDs to userspace.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Simplify the return expression.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

No need to use variable found, we can determine whether the mode was
found by comparing iterator variable to its limit.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Register each LED immediately after parsing OF properties. This
simplifies the driver.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Use helper variable dev instead of always writing &pdev->dev.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Return directly instead of setting result and breaking.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Rename variable led_dat to led in various functions.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Rename structures:
  ns2_led      -> ns2_led_of_one
  ns2_led_data -> ns2_led.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>