- 16 Sep, 2021 33 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.15-2021-09-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.15-2021-09-16: amdgpu: - UBSAN fix - Powerplay table update fix - Fix use after free in BO moves - Debugfs init fixes - vblank workqueue fixes for headless devices - FPU fixes - sysfs_emit fixes - SMU updates for cyan skillfish - Backlight fixes when DMCU is not initialized - DP MST fixes - HDCP compliance fix - Link training fix - Runtime pm fix - Panel orientation fixes - Display GPUVM fix for yellow carp - Add missing license amdkfd: - Drop PCI atomics requirement if proper firmware is available - Suspend/resume fixes for IOMMUv2 cases radeon: - AGP fix Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210916140611.59816-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2021-09-16' of ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes drm/i915 fixes for v5.15-rc2: - Propagate DP link training error returns - Use max link params for eDP 1.3 and earlier - Build warning fixes - Gem selftest fixes - Ensure wakeref is held before hardware access Signed-off-by:
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
Fixes a very annoying issue where the driver view of the MMU state gets out of sync with the actual hardware state across a runtime PM cycle, so we end up restarting the GPU with the wrong (potentially already freed) MMU context. Hilarity ensues. Signed-off-by:
-
Alex Deucher authored
Was missing. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Nicholas Kazlauskas authored
[Why] The "base_addr_is_mc_addr" field was added for dcn3.1 support but pa_config was never updated to set it to false. Uninitialized memory causes it to be set to true which results in address mistranslation and white screen. [How] Use memset to ensure all fields are initialized to 0 by default. Fixes: 64b1d0e8 ("drm/amd/display: Add DCN3.1 HWSEQ") Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
Aaron Liu <aaron.liu@amd.com> Reviewed-by:
-
Simon Ser authored
This patch allows panel orientation quirks from DRM core to be used. They attach a DRM connector property "panel orientation" which indicates in which direction the panel has been mounted. Some machines have the internal screen mounted with a rotation. Since the panel orientation quirks need the native mode from the EDID, check for it in amdgpu_dm_connector_ddc_get_modes. Signed-off-by:
Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
-
Paul Menzel authored
As the user cannot do anything about the unsupported Trusted Memory Zone (TMZ) feature, do not warn about it, but make it informational, so demote the log level from warning to info. Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Michel Dänzer authored
This was unusual; normally, inline functions are declared static as well, and defined in a header file if used by multiple compilation units. The latter would be more involved in this case, so just drop the inline declaration for now. Fixes compile failure building for ppc64le on RHEL 8: In file included from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h:32, from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:33: ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_recovery_init’: ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.h:90:17: error: inlining failed in call to ‘always_inline’ ‘amdgpu_ras_eeprom_max_record_count’: function body not available 90 | inline uint32_t amdgpu_ras_eeprom_max_record_count(void); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1985:34: note: called from here 1985 | max_eeprom_records_len = amdgpu_ras_eeprom_max_record_count(); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: c84d4670 "drm/amdgpu: validate bad page threshold in ras(v3)" Reviewed-by:Lyude Paul <lyude@redhat.com> Signed-off-by:
Michel Dänzer <mdaenzer@redhat.com> Signed-off-by:
-
Evan Quan authored
Current RUNPM mechanism relies on PMFW to master the timing for BACO in/exit. And that needs cooperation from sound driver for dstate change notification for function 1(audio). Otherwise(on sound driver missing), BACO cannot be kicked in correctly and hang will be observed on RUNPM exit. By switching back to legacy message way on sound driver missing, we are able to fix the runpm hang observed for the scenario below: amdgpu driver loaded -> runpm suspend kicked -> sound driver loaded Signed-off-by:
Evan Quan <evan.quan@amd.com> Reported-and-tested-by:
Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Nirmoy Das authored
Pass drm dev directly as rdev->ddev gets initialized later on at radeon_device_init(). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214375Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
James Zhu authored
Separate iommu_resume from kfd_resume, and move it before other amdgpu ip init/resume. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
James Zhu authored
Add amdgpu_amdkfd_resume_iommu for amdgpu. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277Signed-off-by:
-
James Zhu authored
Separate kfd_iommu_resume from kfd_resume for fine-tuning of amdgpu device init/resume/reset/recovery sequence. v2: squash in fix for !CONFIG_HSA_AMD Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277Signed-off-by:
-
Meenakshikumar Somasundaram authored
[Why] If link training is aborted, it shall be retried if sink is present. [How] Check hpd status to find out whether sink is present or not. If sink is present, then link training shall be tried again with same settings. Otherwise, link training shall be aborted. Reviewed-by:
Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by:
Mikita Lipski <mikita.lipski@amd.com> Signed-off-by:
Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Qingqing Zhuo authored
[Why] Intermittently, there presents two occurrences of 0 stream commits in a single HPD event. Current HDCP sequence does not consider such scenerio, and will thus disable HDCP. [How] Add condition check to include stream remove and re-enable case for HDCP enable. Reviewed-by:
Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by:
-
Hersen Wu authored
[Why] call stack of amdgpu dsc mst pbn, slot num calculation is as below: -compute_bpp_x16_from_target_bandwidth -decide_dsc_target_bpp_x16 -setup_dsc_config -dc_dsc_compute_bandwidth_range -compute_mst_dsc_configs_for_link -compute_mst_dsc_configs_for_state from pbn -> dsc target bpp_x16 bpp_x16 is calulated by compute_bpp_x16_from_target_bandwidth. Beside pixel clock and bpp, num_slices_h and bpp_increment_div will also affect bpp_x16. from dsc target bpp_x16 -> pbn within dm_update_mst_vcpi_slots_for_dsc, pbn = drm_dp_calc_pbn_mode(clock, bpp_x16, true); drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc) { return DIV_ROUND_UP_ULL(mul_u32_u32(clock * (bpp / 16), 64 * 1006), 8 * 54 * 1000 * 1000); } bpp / 16 trunc digits after decimal point. This will cause calculation delta. drm_dp_calc_pbn_mode does not have other informations, like num_slices_h, bpp_increment_div. therefore, it does not do revese calcuation properly from bpp_x16 to pbn. pbn from drm_dp_calc_pbn_mode is less than pbn from compute_mst_dsc_configs_for_state. This cause not enough mst slot allocated to display. display could not visually light up. [How] pass pbn from compute_mst_dsc_configs_for_state to dm_update_mst_vcpi_slots_for_dsc Cc: stable@vger.kernel.org Reviewed-by:Scott Foster <Scott.Foster@amd.com> Acked-by:
Hersen Wu <hersenwu@amd.com> Tested-by:
-
Harry Wentland authored
On Carrizo/Stoney systems we set backlight through panel_cntl, i.e. directly via the PWM registers, if DMCU is not initialized. We always read it back through ABM registers which leads to a mismatch and forces atomic_commit to program the backlight each time. Instead make sure we use the same logic for backlight readback, i.e. read it from panel_cntl if DMCU is not initialized. We also need to remove some extraneous and incorrect calculations at the end of dce_get_16_bit_backlight_from_pwm. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1666 Cc: stable@vger.kernel.org Reviewed-by:
Josip Pavic <josip.pavic@amd.com> Acked-by:
-
Felix Kuehling authored
On some GPUs the PCIe atomic requirement for KFD depends on the MEC firmware version. Add a firmware version check for this. The minimum firmware version that works without atomics can be updated in the device_info structure for each GPU type. Move PCIe atomic detection from kgd2kfd_probe into kgd2kfd_device_init because the MEC firmware is not loaded yet at the probe stage. Signed-off-by:
-
Lang Yu authored
Add manual sclk/vddc setting supoort via pp_od_clk_voltage sysfs to maintain consistency with other asics. As cyan skillfish doesn't support DPM, there is only a single frequency and voltage to adjust. v2: maintain consistency and add command guide. v3: adjust user settings storage and coding style. Command guide: echo vc point sclk vddc > pp_od_clk_voltage "vc" - sclk voltage curve "point" - must be 0 "sclk" - target value of sclk(MHz), should be in safe range "vddc" - target value of vddc(mV), a 6.25(mV) stepping is recommended and should be in safe range (the real vddc is an approximation of target value) echo c > pp_od_clk_voltage "c" - commit the changes of sclk and vddc, only after the commit command, the target values set by "vc" command will take effect echo r > pp_od_clk_voltage "r" - reset sclk and vddc to default value, a subsequent commit command is needed to take effect Example: 1) Check default sclk and vddc $ cat pp_od_clk_voltage OD_SCLK: 0: 1800Mhz * OD_VDDC: 0: 862mV * OD_RANGE: SCLK: 1000Mhz 2000Mhz VDDC: 700mV 1129mV 2) Set sclk to 1500MHz and vddc to 700mV $ echo vc 0 1500 700 > pp_od_clk_voltage $ echo c > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 1500Mhz * OD_VDDC: 0: 693mV * OD_RANGE: SCLK: 1000Mhz 2000Mhz VDDC: 700mV 1129mV 3) Reset sclk and vddc to default $ echo r > pp_od_clk_voltage $ echo c > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 1800Mhz * OD_VDDC: 0: 874mV * OD_RANGE: SCLK: 1000Mhz 2000Mhz VDDC: 700mV 1129mV NOTE: We don't specify an explicit safe range, you can set any values between min and max at your own risk. Enjoy! Signed-off-by:
Lang Yu <lang.yu@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Lang Yu authored
Add print_clk_levels and read_sensor pptable funcs for cyan skilfish. v2: keep consitency and add get_gpu_metrics callback. v3: use sysfs_emit_at() in sysfs show function. Signed-off-by:
-
Lang Yu authored
Add SmuMetrics_t definition for cyan skilfish. v2: update SmuMetrics_t definition. v3: cleanup and rearrange the order of fields. Signed-off-by:
-
Lang Yu authored
Add some PPSMC MSGs for cyan skilfish. Signed-off-by:
-
Lang Yu authored
sysfs_emit and sysfs_emit_at requrie a page boundary aligned buf address. Make them happy! v2: use an inline function. Warning Log: [ 492.545174] invalid sysfs_emit_at: buf:00000000f19bdfde at:0 [ 492.546416] WARNING: CPU: 7 PID: 1304 at fs/sysfs/file.c:765 sysfs_emit_at+0x4a/0xa0 [ 492.654805] Call Trace: [ 492.655353] ? smu_cmn_get_metrics_table+0x40/0x50 [amdgpu] [ 492.656780] vangogh_print_clk_levels+0x369/0x410 [amdgpu] [ 492.658245] vangogh_common_print_clk_levels+0x77/0x80 [amdgpu] [ 492.659733] ? preempt_schedule_common+0x18/0x30 [ 492.660713] smu_print_ppclk_levels+0x65/0x90 [amdgpu] [ 492.662107] amdgpu_get_pp_od_clk_voltage+0x13d/0x190 [amdgpu] [ 492.663620] dev_attr_show+0x1d/0x40 Signed-off-by:
-
Anson Jacob authored
Assert only when FPU is not enabled. Fixes: 0ea7ee82 ("drm/amd/display: Add DC_FP helper to check FPU state") Signed-off-by:
Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] If we're running a headless config with 0 links then the vblank workqueue will be NULL - causing a NULL pointer exception during any commit. [How] Guard access to the workqueue if it's NULL and don't queue or flush work if it is. Reported-by:
Mike Lothian <mike@fireburn.co.uk> BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1700 Fixes: 58aa1c50 ("drm/amd/display: Use vblank control events for PSR enable/disable") Signed-off-by:
-
Lucas Stach authored
When we forcefully evict a mapping from the the address space and thus the MMU context, the MMU context is leaked, as the mapping no longer points to it, so it doesn't get freed when the GEM object is destroyed. Add the mssing context put to fix the leak. Cc: stable@vger.kernel.org # 5.4 Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Tested-by:
Michael Walle <michael@walle.cc> Tested-by:
Marek Vasut <marex@denx.de> Reviewed-by:
Christian Gmeiner <christian.gmeiner@gmail.com>
-
Lucas Stach authored
Move the refcount manipulation of the MMU context to the point where the hardware state is programmed. At that point it is also known if a previous MMU state is still there, or the state needs to be reprogrammed with a potentially different context. Cc: stable@vger.kernel.org # 5.4 Signed-off-by:
-
Lucas Stach authored
After a reset the GPU is no longer using the MMU context and may be restarted with a different context. While the mmu_state proeprly was cleared, the context wasn't unreferenced, leading to a memory leak. Cc: stable@vger.kernel.org # 5.4 Reported-by:
-
Lucas Stach authored
When the GPU is reset both the current exec state, as well as all MMU state is lost. Move the driver side state tracking into the reset function to keep hardware and software state from diverging. Cc: stable@vger.kernel.org # 5.4 Signed-off-by:
-
Lucas Stach authored
The MMU state may be kept across a runtime suspend/resume cycle, as we avoid a full hardware reset to keep the latency of the runtime PM small. Don't pretend that the MMU state is lost in driver state. The MMU context is pushed out when new HW jobs with a different context are coming in. The only exception to this is when the GPU is unbound, in which case we need to make sure to also free the last active context. Cc: stable@vger.kernel.org # 5.4 Reported-by:
-
Lucas Stach authored
While the DMA frontend can only be active when the MMU context is set, the reverse isn't necessarily true, as the frontend can be stopped while the MMU state is kept. Stop treating mmu_context being set as a indication that the frontend is running and instead add a explicit property. Cc: stable@vger.kernel.org # 5.4 Signed-off-by:
-
Lucas Stach authored
The prev context is the MMU context at the time of the job queueing in hardware. As a job might be queued multiple times due to recovery after a GPU hang, we need to make sure to put the stale prev MMU context from a prior queuing, to avoid the reference and thus the MMU context leaking. Cc: stable@vger.kernel.org # 5.4 Signed-off-by:
-
Lucas Stach authored
Being able to have the refcount manipulation in an assignment makes it much easier to parse the code. Cc: stable@vger.kernel.org # 5.4 Signed-off-by:
-
- 14 Sep, 2021 7 commits
-
-
Nirmoy Das authored
debugfs APIs returns encoded error so use IS_ERR for checking return value. v2: return PTR_ERR(ent) References: https://gitlab.freedesktop.org/drm/amd/-/issues/1686Signed-off-by:
Shashank Sharma <shashank.sharma@amd.com> Signed-off-by:
-
Simon Ser authored
In amdgpu_dm_atomic_check, dc_validate_global_state is called. On failure this logs a warning to the kernel journal. However warnings shouldn't be used for atomic test-only commit failures: user-space might be perfoming a lot of atomic test-only commits to find the best hardware configuration. Downgrade the log to a regular DRM atomic message. While at it, use the new device-aware logging infrastructure. This fixes error messages in the kernel when running gamescope [1]. [1]: https://github.com/Plagman/gamescope/issues/245Reviewed-by:
-
Christian König authored
The memory backing old_mem is already freed at that point, move the check a bit more up. Signed-off-by:
-
Kenneth Feng authored
fix the issue of uploading powerplay table due to the dependancy of rlc. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Jack Gui <Jack.Gui@amd.com> Signed-off-by:
-
Ernst Sjöstrand authored
Seems like newer cards can have even more instances now. Found by UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:318:29 index 8 is out of range for type 'uint32_t *[8]' Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1697 Cc: stable@vger.kernel.org Signed-off-by:
Ernst Sjöstrand <ernstp@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
This warning helps catch uninitialized variables. It should have been enabled at the same time as commit b2423184 ("drm/i915: Enable -Wuninitialized") but I did not realize they were disabled separately. Enable it now that i915 is clean so that it stays that way. Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210824225427.2065517-4-nathan@kernel.org (cherry picked from commit 43192617) Signed-off-by:
-
Nathan Chancellor authored
Clang warns: drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:127:13: warning: variable 'err' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] } else if (PTR_ERR(import) != -EOPNOTSUPP) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:138:9: note: uninitialized use occurs here return err; ^~~ drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:127:9: note: remove the 'if' if its condition is always true } else if (PTR_ERR(import) != -EOPNOTSUPP) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:95:9: note: initialize the variable 'err' to silence this warning int err; ^ = 0 The test is expected to pass if i915_gem_prime_import() returns -EOPNOTSUPP so initialize err to zero in this case. Fixes: cdb35d1e ("drm/i915/gem: Migrate to system at dma-buf attach time (v7)") Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by:
-
