- 26 Oct, 2021 40 commits
-
-
Filipe Manana authored
At replay_dir_deletes(), if find_dir_range() returns an error we break out of the main while loop and then assign a value of 0 (success) to the 'ret' variable, resulting in completely ignoring that an error happened. Fix that by jumping to the 'out' label when find_dir_range() returns an error (negative value). CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
The member btrfs_bio::logical is only initialized by two call sites: - btrfs_repair_one_sector() No corresponding site to utilize it. - btrfs_submit_direct() The corresponding site to utilize it is btrfs_check_read_dio_bio(). However for btrfs_check_read_dio_bio(), we can grab the file_offset from btrfs_dio_private::file_offset directly. Thus it turns out we don't really need that btrfs_bio::logical member at all. For btrfs_bio, the logical bytenr can be fetched from its bio->bi_iter.bi_sector directly. So let's just remove the member to save 8 bytes for structure btrfs_bio. Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
-
Qu Wenruo authored
The naming of "logical_offset" can be confused with logical bytenr of the dio range. In fact it's file offset, and the naming "file_offset" is already widely used in all other sites. Just do the rename to avoid confusion. Signed-off-by:
-
Christoph Hellwig authored
Using local kmaps slightly reduces the chances to stray writes, and the bvec interface cleans up the code a little bit. Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Anand Jain authored
btrfs_update_block_group() accounts for the number of bytes allocated or freed. Argument @alloc specifies whether the call is for alloc or free. Convert the argument @alloc type from int to bool. Reviewed-by:
Su Yue <l@damenly.su> Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Nikolay Borisov authored
Now that real_root is only used in ref-verify core gate it behind CONFIG_BTRFS_FS_REF_VERIFY ifdef. This shrinks the size of pending delayed refs by 8 bytes per ref, of which we can have many at any one time depending on intensity of the workload. Also change the comment about the member as it no longer deals with qgroups. Signed-off-by:
-
Nikolay Borisov authored
Instead of checking whether qgroup processing for a dealyed ref has to happen in the core of delayed ref, simply pull the check at init time of respective delayed ref structures. This eliminates the final use of real_root in delayed-ref core paving the way to making this member optional. Signed-off-by:
-
Nikolay Borisov authored
In order to make 'real_root' used only in ref-verify it's required to have the necessary context to perform the same checks that this member is used for. So add 'mod_root' which will contain the root on behalf of which a delayed ref was created and a 'skip_group' parameter which will contain callsite-specific override of skip_qgroup. Signed-off-by:
-
Nikolay Borisov authored
The real_root field is going to be used only by ref-verify tool so limit its use outside of it. Blocks belonging to the chunk root will always have it as an owner so the check is equivalent. Signed-off-by:
-
Nikolay Borisov authored
Both data and metadata delayed ref structures have fields named root/ref_root respectively. Those are somewhat cryptic and don't really convey the real meaning. In fact those roots are really the original owners of the respective block (i.e in case of a snapshot a data delayed ref will contain the original root that owns the given block). Rename those fields accordingly and adjust comments. Signed-off-by:
-
Josef Bacik authored
Error injection stressing uncovered a busy loop in our data reclaim loop. There are two cases here, one where we loop creating block groups until space_info->full is set, or in the main loop we will skip erroring out any tickets if space_info->full == 0. Unfortunately if we aborted the transaction then we will never allocate chunks or reclaim any space and thus never get ->full, and you'll see stack traces like this: watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [kworker/u4:4:139] CPU: 0 PID: 139 Comm: kworker/u4:4 Tainted: G W 5.13.0-rc1+ #328 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: events_unbound btrfs_async_reclaim_data_space RIP: 0010:btrfs_join_transaction+0x12/0x20 RSP: 0018:ffffb2b780b77de0 EFLAGS: 00000246 RAX: ffffb2b781863d58 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000801 RSI: ffff987952b57400 RDI: ffff987940aa3000 RBP: ffff987954d55000 R08: 0000000000000001 R09: ffff98795539e8f0 R10: 000000000000000f R11: 000000000000000f R12: ffffffffffffffff R13: ffff987952b574c8 R14: ffff987952b57400 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffff9879bbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0703da4000 CR3: 0000000113398004 CR4: 0000000000370ef0 Call Trace: flush_space+0x4a8/0x660 btrfs_async_reclaim_data_space+0x55/0x130 process_one_work+0x1e9/0x380 worker_thread+0x53/0x3e0 ? process_one_work+0x380/0x380 kthread+0x118/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x1f/0x30 Fix this by checking to see if we have a btrfs fs error in either of the reclaim loops, and if so fail the tickets and bail. In addition to this, fix maybe_fail_all_tickets() to not try to grant tickets if we've aborted, simply fail everything. Reviewed-by:
-
Josef Bacik authored
We have a few flags that are inconsistently used to describe the fs in different states of failure. As of 5963ffca ("btrfs: always abort the transaction if we abort a trans handle") we will always set BTRFS_FS_STATE_ERROR if we abort, so we don't have to check both ABORTED and ERROR to see if things have gone wrong. Add a helper to check BTRFS_FS_STATE_ERROR and then convert all checkers of FS_STATE_ERROR to use the helper. The TRANS_ABORTED bit check was added in af722733 ("Btrfs: clean up resources during umount after trans is aborted") but is not actually specific. Reviewed-by:
-
Josef Bacik authored
Currently we will abort the transaction if we get a random error (like -EIO) while trying to remove the directory entries from the root log during rename. However since these are simply log tree related errors, we can mark the trans as needing a full commit. Then if the error was truly catastrophic we'll hit it during the normal commit and abort as appropriate. Reviewed-by:
-
Josef Bacik authored
During inspection of the return path for replay I noticed that we don't actually abort the transaction if we get a failure during replay. This isn't a problem necessarily, as we properly return the error and will fail to mount. However we still leave this dangling transaction that could conceivably be committed without thinking there was an error. We were using btrfs_handle_fs_error() here, but that pre-dates the transaction abort code. Simply replace the btrfs_handle_fs_error() calls with transaction aborts, so we still know where exactly things went wrong, and add a few in some other un-handled error cases. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
-
Kai Song authored
Fix memdup.cocci warning: fs/btrfs/zoned.c:1198:23-30: WARNING opportunity for kmemdup Reviewed-by:
Kai Song <songkai01@inspur.com> Reviewed-by:
-
Qu Wenruo authored
For compressed write, we use a mechanism called async COW, which unlike regular run_delalloc_cow() or cow_file_range() will also unlock the first page. This mechanism allows us to continue handling next ranges, without waiting for the time consuming compression. But this has a problem for subpage case, as we could have the following delalloc range for a page: 0 32K 64K | |///////| |///////| \- A \- B In the above case, if we pass both ranges to cow_file_range_async(), both range A and range B will try to unlock the full page [0, 64K). And which one finishes later than the other one will try to do other page operations like end_page_writeback() on a unlocked page, triggering VM layer BUG_ON(). To make subpage compression work at least partially, here we add another restriction for it, only allow compression if the delalloc range is fully page aligned. By that, async extent is always ensured to unlock the first page exclusively, just like it used to be for regular sectorsize. In theory, we only need to make sure the delalloc range fully covers its first page, but the tail page will be locked anyway, blocking later writeback until the compression finishes. Thus here we choose to make sure the range is fully page aligned before doing the compression. In the future, we could optimize the situation by properly increasing subpage::writers number for the locked page, but that also means we need to change how we run delalloc range of page. (Instead of running each delalloc range we hit, we need to find and lock all delalloc ranges covering the page, then run each of them). Reviewed-by:
-
Qu Wenruo authored
[BUG] With experimental subpage compression enabled, a simple fsstress can lead to self deadlock on page 720896: mkfs.btrfs -f -s 4k $dev > /dev/null mount $dev -o compress $mnt $fsstress -p 1 -n 100 -w -d $mnt -v -s 1625511156 [CAUSE] If we have a file layout looks like below: 0 32K 64K 96K 128K |//| |///////////////| 4K Then we run delalloc range for the inode, it will: - Call find_lock_delalloc_range() with @delalloc_start = 0 Then we got a delalloc range [0, 4K). This range will be COWed. - Call find_lock_delalloc_range() again with @delalloc_start = 4K Since find_lock_delalloc_range() never cares whether the range is still inside page range [0, 64K), it will return range [64K, 128K). This range meets the condition for subpage compression, will go through async COW path. And async COW path will return @page_started. But that @page_started is now for range [64K, 128K), not for range [0, 64K). - writepage_dellloc() returned 1 for page [0, 64K) Thus page [0, 64K) will not be unlocked, nor its page dirty status will be cleared. Next time when we try to lock page [0, 64K) we will deadlock, as there is no one to release page [0, 64K). This problem will never happen for regular page size as one page only contains one sector. After the first find_lock_delalloc_range() call, the @delalloc_end will go beyond @page_end no matter if we found a delalloc range or not Thus this bug only happens for subpage, as now we need multiple runs to exhaust the delalloc range of a page. [FIX] Fix the problem by ensuring the delalloc range we ran at least started inside @locked_page. So that we will never get incorrect @page_started. And to prevent such problem from happening again: - Make find_lock_delalloc_range() return false if the found range is beyond @end value passed in. Since @end will be utilized now, add an ASSERT() to ensure we pass correct @end into find_lock_delalloc_range(). This also means, for selftests we needs to populate @end before calling find_lock_delalloc_range(). - New ASSERT() in find_lock_delalloc_range() Now we will make sure the @start/@end passed in at least covers part of the page. - New ASSERT() in run_delalloc_range() To make sure the range at least starts inside @locked page. - Use @delalloc_start as proper cursor, while @delalloc_end is always reset to @page_end. Signed-off-by: -
Qu Wenruo authored
There are several call sites of extent_clear_unlock_delalloc() which get @locked_page = NULL. So that extent_clear_unlock_delalloc() will try to call process_one_page() to unlock every page even the first page is not locked by btrfs_page_start_writer_lock(). This will trigger an ASSERT() in btrfs_subpage_end_and_test_writer() as previously we require every page passed to btrfs_subpage_end_and_test_writer() to be locked by btrfs_page_start_writer_lock(). But compression path doesn't go that way. Thankfully it's not hard to distinguish page locked by lock_page() and btrfs_page_start_writer_lock(). So do the check in btrfs_subpage_end_and_test_writer() so now it can handle both cases well. Signed-off-by:
-
Qu Wenruo authored
Pages passed to __extent_writepage() are always locked, but they may be locked by different functions. There are two types of locked page for __extent_writepage(): - Page locked by plain lock_page() It should not have any subpage::writers count. Can be unlocked by unlock_page(). This is the most common locked page for __extent_writepage() called inside extent_write_cache_pages() or extent_write_full_page(). Rarer cases include the @locked_page from extent_write_locked_range(). - Page locked by lock_delalloc_pages() There is only one caller, all pages except @locked_page for extent_write_locked_range(). In this case, we have to call subpage helper to handle the case. So here we introduce a helper, btrfs_page_unlock_writer(), to allow __extent_writepage() to unlock different locked pages. And since for all other callers of __extent_writepage() their pages are ensured to be locked by lock_page(), also add an extra check for epd::extent_locked to unlock such pages directly. Signed-off-by:
-
Qu Wenruo authored
There are several problems in lzo_compress_pages() preventing it from being subpage compatible: - No page offset is calculated when reading from inode pages For subpage case, we could have @start which is not aligned to PAGE_SIZE. Thus the destination where we read data from must take offset in page into consideration. - The padding for segment header is bound to PAGE_SIZE This means, for subpage case we can skip several corners where on x86 machines we need to add padding zeros. The rework will: - Update the comment to replace "page" with "sector" - Introduce a new helper, copy_compressed_data_to_page(), to do the copy So that we don't need to bother page switching for both input and output. Now in lzo_compress_pages() we only care about page switching for input, while in copy_compressed_data_to_page() we only care about the page switching for output. - Only one main cursor For lzo_compress_pages() we use @cur_in as main cursor. It will be the file offset we are currently at. All other helper variables will be only declared inside the loop. For copy_compressed_data_to_page() it's similar, we will have @cur_out at the main cursor, which records how many bytes are in the output. Signed-off-by:
-
Qu Wenruo authored
Introduce a new helper, submit_uncompressed_range(), for async cow cases where we fallback to COW. There are some new updates introduced to the helper: - Proper locked_page detection It's possible that the async_extent range doesn't cover the locked page. In that case we shouldn't unlock the locked page. In the new helper, we will ensure that we only unlock the locked page when: * The locked page covers part of the async_extent range * The locked page is not unlocked by cow_file_range() nor extent_write_locked_range() This also means extra comments are added focusing on the page locking. - Add extra comment on some rare parameter used. We use @unlock_page = 0 for cow_file_range(), where only two call sites doing the same thing, including the new helper. It's definitely worth some comments. Signed-off-by: -
Qu Wenruo authored
There are two sites are not subpage compatible yet for extent_write_locked_range(): - How @nr_pages are calculated For subpage we can have the following range with 64K page size: 0 32K 64K 96K 128K | |////|/////| | In that case, although 96K - 32K == 64K, thus it looks like one page is enough, but the range spans two pages, not one. Fix it by doing proper round_up() and round_down() to calculate @nr_pages. Also add some extra ASSERT()s to ensure the range passed in is already aligned. - How the page end is calculated Currently we just use cur + PAGE_SIZE - 1 to calculate the page end. Which can't handle the above range layout, and will trigger ASSERT() in btrfs_writepage_endio_finish_ordered(), as the range is no longer covered by the page range. Fix it by taking page end into consideration. Signed-off-by:
-
Qu Wenruo authored
In end_compressed_writeback() we just clear the full page writeback. For subpage case, if there are two delalloc ranges in the same page, the 2nd range will trigger a BUG_ON() as the page writeback is already cleared by previous range. Fix it by using btrfs_page_clamp_clear_writeback() helper. Signed-off-by:
-
Qu Wenruo authored
There is a WARN_ON() checking if @start is aligned to PAGE_SIZE, not sectorsize, which will cause false alert for subpage. Fix it to check against sectorsize. Furthermore: - Use ASSERT() to do the check So that in the future we may skip the check for production build - Also check alignment for @len Signed-off-by:
-
Qu Wenruo authored
In function compress_file_range(), when the compression is finished, the function just rounds up @total_in to PAGE_SIZE. This is fine for regular sectorsize == PAGE_SIZE case, but not for subpage. Just change the ALIGN(, PAGE_SIZE) to round_up(, sectorsize) so that both regular sectorsize and subpage sectorsize will be happy. Signed-off-by:
-
Qu Wenruo authored
There are several cleanups for extent_write_locked_range(), most of them are pure cleanups, but with some preparation for future subpage support. - Add a proper comment for which call sites are suitable Unlike regular synchronized extent write back, if async COW or zoned COW happens, we have all pages in the range still locked. Thus for those (only) two call sites, we need this function to submit page content into bios and submit them. - Remove @mode parameter All the existing two call sites pass WB_SYNC_ALL. No need for @mode parameter. - Better error handling Currently if we hit an error during the page iteration loop, we overwrite @ret, causing only the last error can be recorded. Here we add @found_error and @first_error variable to record if we hit any error, and the first error we hit. So the first error won't get lost. - Don't reuse @start as the cursor We reuse the parameter @start as the cursor to iterate the range, not a big problem, but since we're here, introduce a proper @cur as the cursor. - Remove impossible branch Since all pages are still locked after the ordered extent is inserted, there is no way that pages can get its dirty bit cleared. Remove the branch where page is not dirty and replace it with an ASSERT(). Signed-off-by:
-
Qu Wenruo authored
We have a big chunk of code inside a while() loop, with tons of strange jumps for error handling. It's definitely not to the code standard of today. Move the code into a new function, submit_one_async_extent(). Since we're here, also do the following changes: - Comment style change To follow the current scheme - Don't fallback to non-compressed write then hitting ENOSPC If we hit ENOSPC for compressed write, how could we reserve more space for non-compressed write? Thus we go error path directly. This removes the retry: label. - Add more comment for super long parameter list Explain which parameter is for, so we don't need to check the prototype. - Move the error handling to submit_one_async_extent() Thus no strange code like: out_free: ... goto again; Signed-off-by:
-
Qu Wenruo authored
As the last caller in compression.c has been removed, we don't need that function anymore. Signed-off-by:
-
Qu Wenruo authored
Currently btrfs_submit_compressed_write() will check btrfs_bio_fits_in_stripe() each time a new page is going to be added. Even if compressed extent is small, we don't really need to do that for every page. Align the behavior to extent_io.c, by determining the stripe boundary when allocating a bio. Unlike extent_io.c, in compressed.c we don't need to bother things like different bio flags, thus no need to re-use bio_ctrl. Here we just manually introduce new local variable, next_stripe_start, and use that value returned from alloc_compressed_bio() to calculate the stripe boundary. Then each time we add some page range into the bio, we check if we reached the boundary. And if reached, submit it. Also, since we have @cur_disk_bytenr to determine whether we're the last bio, we don't need a explicit last_bio: tag for error handling any more. And since we use @cur_disk_bytenr to wait, there is no need for pending_bios, also remove it to save some memory of compressed_bio. Signed-off-by:
-
Qu Wenruo authored
Currently btrfs_submit_compressed_read() will check btrfs_bio_fits_in_stripe() each time a new page is going to be added. Even if compressed extent is small, we don't really need to do that for every page. This patch will align the behavior to extent_io.c, by determining the stripe boundary when allocating a bio. Unlike extent_io.c, in compressed.c we don't need to bother things like different bio flags, thus no need to re-use bio_ctrl. Here we just manually introduce new local variable, next_stripe_start, and teach alloc_compressed_bio() to calculate the stripe boundary. Then each time we add some page range into the bio, we check if we reached the boundary. And if reached, submit it. Also, since we have @cur_disk_byte to determine whether we're the last bio, we don't need a explicit last_bio: tag for error handling any more. And we can use @cur_disk_byte to track which range has been added to bio, we can also use @cur_disk_byte to calculate the wait condition, no need for @pending_bios. Signed-off-by:
-
Qu Wenruo authored
Just aggregate the bio allocation code into one helper, so that we can replace 4 call sites. There is one special note for zoned write. Currently btrfs_submit_compressed_write() will only allocate the first bio using ZONE_APPEND. If we have to submit current bio due to stripe boundary, the new bio allocated will not use ZONE_APPEND. In theory this should be a bug, but considering zoned mode currently only support SINGLE profile, which doesn't have any stripe boundary limit, it should never be a problem and we have assertions in place. This function will provide a good entrance for any work which needs to be done at bio allocation time. Like determining the stripe boundary. Signed-off-by:
-
Qu Wenruo authored
The new helper, submit_compressed_bio(), will aggregate the following work: - Increase compressed_bio::pending_bios - Remap the endio function - Map and submit the bio This slightly reorders calls to btrfs_csum_one_bio or btrfs_lookup_bio_sums but but none of them does anything regarding IO submission so this is effectively no change. We mainly care about order of - atomic_inc - btrfs_bio_wq_end_io - btrfs_map_bio Signed-off-by:
-
Qu Wenruo authored
Just like btrfs_submit_compressed_read(), there are quite some BUG_ON()s inside btrfs_submit_compressed_write() for the bio submission path. Fix them using the same method: - For last bio, just endio the bio As in that case, one of the endio function of all these submitted bio will be able to free the compressed_bio - For half-submitted bio, wait and finish the compressed_bio manually In this case, as long as all other bio finish, we're the only one referring the compressed bio, and can manually finish it. Signed-off-by:
-
Qu Wenruo authored
There are quite some BUG_ON()s inside btrfs_submit_compressed_read(), namely all errors inside the for() loop relies on BUG_ON() to handle -ENOMEM. Handle these errors properly by: - Wait for submitted bios to finish first Using wake_var_event() APIs to wait without introducing extra memory overhead inside compressed_bio. This allows us to wait for any submitted bio to finish, while still keeps the compressed_bio from being freed. - Introduce finish_compressed_bio_read() to finish the compressed_bio - Properly end the bio and finish compressed_bio when error happens Now in btrfs_submit_compressed_read() even when the bio submission failed, we can properly handle the error without triggering BUG_ON(). Signed-off-by:
-
Qu Wenruo authored
Although in btrfs we have very limited usage of PageChecked flag, it's still some page flag not yet subpage compatible. Fix it by introducing btrfs_subpage::checked_offset to do the convert. For most call sites, especially for free-space cache, COW fixup and btrfs_invalidatepage(), they all work in full page mode anyway. For other call sites, they work as subpage compatible mode. Some call sites need extra modification: - btrfs_drop_pages() Needs extra parameter to get the real range we need to clear checked flag. Also since btrfs_drop_pages() will accept pages beyond the dirtied range, update btrfs_subpage_clamp_range() to handle such case by setting @len to 0 if the page is beyond target range. - btrfs_invalidatepage() We need to call subpage helper before calling __btrfs_releasepage(), or it will trigger ASSERT() as page->private will be cleared. - btrfs_verify_data_csum() In theory we don't need the io_bio->csum check anymore, but it's won't hurt. Just change the comment. Signed-off-by:
-
Qu Wenruo authored
For btrfs_submit_compressed_read() and btrfs_submit_compressed_write(), we have a pretty weird dance around compressed_bio::pending_bios: btrfs_submit_compressed_read/write() { cb = kmalloc() refcount_set(&cb->pending_bios, 0); bio = btrfs_alloc_bio(); /* NOTE here, we haven't yet submitted any bio */ refcount_set(&cb->pending_bios, 1); for (pg_index = 0; pg_index < cb->nr_pages; pg_index++) { if (submit) { /* Here we submit bio, but we always have one * extra pending_bios */ refcount_inc(&cb->pending_bios); ret = btrfs_map_bio(); } } /* Submit the last bio */ ret = btrfs_map_bio(); } There are two reasons why we do this: - compressed_bio::pending_bios is a refcount Thus if it's reduced to 0, it can not be increased again. - To ensure the compressed_bio is not freed by some submitted bios If the submitted bio is finished before the next bio submitted, we can free the compressed_bio completely. But the above code is sometimes confusing, and we can do it better by introducing a new member, compressed_bio::pending_sectors. Now we use compressed_bio::pending_sectors to indicate whether we have any pending sectors under IO or not yet submitted. If pending_sectors == 0, we're definitely the last bio of compressed_bio, and is OK to release the compressed bio. Now the workflow looks like this: btrfs_submit_compressed_read/write() { cb = kmalloc() atomic_set(&cb->pending_bios, 0); refcount_set(&cb->pending_sectors, compressed_len >> sectorsize_bits); bio = btrfs_alloc_bio(); for (pg_index = 0; pg_index < cb->nr_pages; pg_index++) { if (submit) { refcount_inc(&cb->pending_bios); ret = btrfs_map_bio(); } } /* Submit the last bio */ refcount_inc(&cb->pending_bios); ret = btrfs_map_bio(); } For now we still need pending_bios for later error handling, but will remove pending_bios eventually after properly handling the errors. Signed-off-by: -
Qu Wenruo authored
[BUG] If we remove the subpage limitation in add_ra_bio_pages(), then read a compressed extent which has part of its range in next page, like the following inode layout: 0 32K 64K 96K 128K |<--------------|-------------->| Btrfs will trigger ASSERT() in endio function: assertion failed: atomic_read(&subpage->readers) >= nbits ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.h:3431! Internal error: Oops - BUG: 0 [#1] SMP Workqueue: btrfs-endio btrfs_work_helper [btrfs] Call trace: assertfail.constprop.0+0x28/0x2c [btrfs] btrfs_subpage_end_reader+0x148/0x14c [btrfs] end_page_read+0x8c/0x100 [btrfs] end_bio_extent_readpage+0x320/0x6b0 [btrfs] bio_endio+0x15c/0x1dc end_workqueue_fn+0x44/0x64 [btrfs] btrfs_work_helper+0x74/0x250 [btrfs] process_one_work+0x1d4/0x47c worker_thread+0x180/0x400 kthread+0x11c/0x120 ret_from_fork+0x10/0x30 ---[ end trace c8b7b552d3bb408c ]--- [CAUSE] When we read the page range [0, 64K), we find it's a compressed extent, and we will try to add extra pages in add_ra_bio_pages() to avoid reading the same compressed extent. But when we add such page into the read bio, it doesn't follow the behavior of btrfs_do_readpage() to properly set subpage::readers. This means, for page [64K, 128K), its subpage::readers is still 0. And when endio is executed on both pages, since page [64K, 128K) has 0 subpage::readers, it triggers above ASSERT() [FIX] Function add_ra_bio_pages() is far from subpage compatible, it always assume PAGE_SIZE == sectorsize, thus when it skip to next range it always just skip PAGE_SIZE. Make it subpage compatible by: - Skip to next page properly when needed If we find there is already a page cache, we need to skip to next page. For that case, we shouldn't just skip PAGE_SIZE bytes, but use @pg_index to calculate the next bytenr and continue. - Only add the page range covered by current extent map We need to calculate which range is covered by current extent map and only add that part into the read bio. - Update subpage::readers before submitting the bio - Use proper cursor other than confusing @last_offset - Calculate the missed threshold based on sector size It's no longer using missed pages, as for 64K page size, we have at most 3 pages to skip. (If aligned only 2 pages) - Add ASSERT() to make sure our bytenr is always aligned - Add comment for the function Add a special note for subpage case, as the function won't really work well for subpage cases. Signed-off-by:
-
Qu Wenruo authored
Since async_extent holds the compressed page, it would trigger the new ASSERT() in btrfs_mark_ordered_io_finished() which checks that the range is inside the page. Now btrfs_writepage_endio_finish_ordered() can accept @page == NULL, just pass NULL to btrfs_writepage_endio_finish_ordered(). Signed-off-by:
-
Qu Wenruo authored
For structure async_chunk, we use a very strange member layout to grab structure async_cow who owns this async_chunk. At initialization, it goes like this: async_chunk[i].pending = &ctx->num_chunks; Then at async_cow_free() we do a super weird freeing: /* * Since the pointer to 'pending' is at the beginning of the array of * async_chunk's, freeing it ensures the whole array has been freed. */ if (atomic_dec_and_test(async_chunk->pending)) kvfree(async_chunk->pending); This is absolutely an abuse of kvfree(). Replace async_chunk::pending with async_chunk::async_cow, so that we can grab the async_cow structure directly, without this strange dancing. And with this change, there is no requirement for any specific member location. Reviewed-by:
-
Qu Wenruo authored
In function __extent_writepage() we always pass page start to @delalloc_start for writepage_delalloc(). Thus we don't really need @delalloc_start parameter as we can extract it from @page. Remove @delalloc_start parameter and make __extent_writepage() to declare @page_start and @page_end as const. Signed-off-by:
-
