- 04 Jul, 2008 36 commits
-
-
Jan Kara authored
When write in reiserfs_quota_write() fails, we have to properly release i_mutex. One error path has been missing the unlock... Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Kara authored
When write in ext4_quota_write() fails, we have to properly release i_mutex. One error path has been missing the unlock... Signed-off-by:
-
Jan Kara authored
When write in ext3_quota_write() fails, we have to properly release i_mutex. One error path has been missing the unlock... Signed-off-by:
-
Miguel Ojeda authored
Signed-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
-
Tejun Heo authored
It seems VT3336 can't do msi either as with its bro 3351. Disable it. Reported in the following SUSE bug. https://bugzilla.novell.com/show_bug.cgi?id=300001Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Huacai Chen authored
When writing /proc/acpi/alarm in adjust mode, e.g. echo "+0000-00-00 00:00:15" >/proc/acpi/alarm The "century" field should be read and added to "year" field before writing, otherwise the CMOS time will go back to 2000 years ago, e.g. # cat /proc/acpi/alarm 0008-06-21 11:38:46 Then the system time may be reset to the date of manufacture after rebooting. This patch fixed this issue. Signed-off-by:
Huacai Chen <huacai.chen@intel.com> Acked-by:
Pavel Machek <pavel@suse.cz> Acked-by:
Zhao Yakui <yakui.zhao@intel.com> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Acked-by:
Len Brown <lenb@kernel.org> Signed-off-by:
-
Michael Hamel authored
I have discovered that the current version of rtc-x1205.c does not work correctly when asked to set the alarm time by the RTC_WKALM_SET ioctl() call. This happens because the alarm registers do not behave like the current-time registers. They are non-volatile. Two things go wrong: - the X1205 requires a 10 msec delay after any attempt to write to the non-volatile registers. The x1205_set_datetime() routine does the write as 8 single-byte writes without any delay. Only the first write succeeds. The second is NAKed because the chip is busy. - the X1205 resets the RWEL bit after any write to the non-volatile registers. This would lock out any further writes after the first even with a 10msec delay. I fix this by doing a single 8-byte write and then waiting 10msec for the chip to be ready. A side effect of this change is that it will speed up x1205_rtc_set_time() which uses the same code. I have also implemented the 'enable' bit in the rtc_wkalm structure, which the existing driver does not attempt to do. I have modified both x1205_rtc_set_alarm() to set the AL0E bit, and x1205_rtc_read_alarm() to return it. I have tested this patch on a LinkSys NSLU2 under OpenWRT, but on no other hardware. On the NSLU2 the X1205 correctly asserts its IRQ pin when the alarm time matches the current time. [akpm@linux-foundation.org: clean up over-parenthesisation] Signed-off-by:
Michael Hamel <mhamel@adi.co.nz> Signed-off-by:
-
Oleg Nesterov authored
get_user_pages() must not return the error when i != 0. When pages != NULL we have i get_page()'ed pages. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Acked-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Guennadi Liakhovetski authored
As reported by Vipul Gandhi, the current serial_match_port() doesn't work for tty-devices using dynamic major number allocation. Fix it. It oopses if you suspend a serial port with _dynamic_ major number. ATM, I think, there's only the drivers/serial/jsm/jsm_driver.c driver, that does it in-tree. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by:
Vipul Gandhi <vcgandhi1@aol.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by:
-
James Bottomley authored
> the build (.config attached) failed, make ends with : > ... > UPD include/linux/compile.h > CC init/version.o > LD init/built-in.o > LD vmlinux > drivers/built-in.o: In function `sas_request_addr': > (.text+0x33bab): undefined reference to `request_firmware' > drivers/built-in.o: In function `sas_request_addr': > (.text+0x33c3f): undefined reference to `release_firmware' > make: *** [vmlinux] Error 1 There's a slight fault in the stub logic. It fails for FW_LOADER=m and the user =y. This should fix it. This patch fixes the following 2.6.26-rc regression: http://bugzilla.kernel.org/show_bug.cgi?id=10730Reviewed-by:
Toralf Foerster <toralf.foerster@gmx.de> Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
David Brownell authored
While 0e36a9a4 ("rtc: fix readback from /sys/class/rtc/rtc?/wakealarm") made sure that active alarms were never returned with invalid "wildcard" fields (negative), it can still report (wrongly) that the alarm triggers in the past. Example, if it's now 10am, an alarm firing at 5am will be triggered TOMORROW not today. (Which may also be next month or next year...) This updates that alarm handling in three ways: * Handle alarm rollover in the common cases of RTCs that don't support matching on all date fields. * Skip the invalid-field logic when it's not needed. * Minor bugfix ... tm_isdst should be ignored, it's one of the fields Linux doesn't maintain. A warning is emitted for some of the unhandled rollover cases, but the possible combinations are a bit too numerous to handle every bit of potential hardware and firmware braindamage. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Mark Lord <lkml@rtr.ca> Acked-by:
-
Peter Zijlstra authored
Dirty page accounting accurately measures the amound of dirty pages in writable shared mappings by mapping the pages RO (as indicated by vma_wants_writenotify). We then trap on first write and call set_page_dirty() on the page, after which we map the page RW and continue execution. When we launder dirty pages, we call clear_page_dirty_for_io() which clears both the dirty flag, and maps the page RO again before we start writeout so that the story can repeat itself. vma_wants_writenotify() excludes VM_PFNMAP on the basis that we cannot do the regular dirty page stuff on raw PFNs and the memory isn't going anywhere anyway. The recently introduced VM_MIXEDMAP mixes both !pfn_valid() and pfn_valid() pages in a single mapping. We can't do dirty page accounting on !pfn_valid() pages as stated above, and mapping them RO causes them to be COW'ed on write, which breaks VM_SHARED semantics. Excluding VM_MIXEDMAP in vma_wants_writenotify() would mean we don't do the regular dirty page accounting for the pfn_valid() pages, which would bring back all the head-aches from inaccurate dirty page accounting. So instead, we let the !pfn_valid() pages get mapped RO, but fix them up unconditionally in the fault path. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by:
Hugh Dickins <hugh@veritas.com> Cc: "Jared Hulbert" <jaredeh@gmail.com> Signed-off-by:
-
Christoph Lameter authored
Remove all clameter@sgi.com addresses from the kernel tree since they will become invalid on June 27th. Change my maintainer email address for the slab allocators to cl@linux-foundation.org (which will be the new email address for the future). Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_mv: safer logic for limit_warnings libata-sff: improve HSM violation reporting ahci: always clear all bits in irq_stat sata_sil24: add DID for another adaptec flavor sata_uli: hardreset is broken
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix bug in atomic_sub_if_positive.
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: Do not use 192 byte sized cache if minimum alignment is 128 byte
-
Paul Mackerras authored
This updates the MAINTAINERS entries for powerpc. It adds Ben H to the overall Linux for PowerPC entry and makes it clear this covers both 32-bit and 64-bit machines. It removes the separate entry we had for Linux on 64-bit PowerPC where Anton and I were listed as maintainers - Anton hasn't been involved in the day-to-day maintenance of the code for several years. Finally, it removes the entry for the Linux for PowerPC boot code where Tom Rini was listed as the maintainer. That code got completely rewritten when we merged 32-bit and 64-bit, and I and the various platform maintainers have been maintaining that code since. Signed-off-by:
Paul Mackerras <paulus@samba.org> Acked-by:
Tom Rini <trini@kernel.crashing.org> Signed-off-by:
-
Mark Lord authored
There is a miniscule chance that two separate host controllers might be in sata_mv at the same time and manage to decrement the static limit_warnings variable below zero. Fix the comparison to deal with it. Signed-off-by:
Mark Lord <mlord@pobox.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Tejun Heo authored
Improve SFF HSM violation reporting such that each HSM violation can be distinguished using ehi_desc. Signed-off-by:
-
Tejun Heo authored
Some AHCI controllers (ICH7 was reported) set pending bit in HOST_IRQ_STAT for non-existent ports and when it's not cleared falls into IRQ storm. Always clear full irq_stat instead of only the bits that are handled. As nothing changes for recognized ports, the risk of breaking things is pretty low. Reported and verified by Philipp Thomas in the following suse bugzilla. https://bugzilla.novell.com/attachment.cgi?id=215692Signed-off-by:
-
Tejun Heo authored
There's another DID used for Adaptec card. Add it. Reported by Travis Read. Signed-off-by:
-
Ralf Baechle authored
The branch optimization fixes in 2.6.21 introduced a bug in atomic_sub_if_positive that causes it to return even when the sc instruction fails. The result is that e.g. down_trylock becomes unreliable as the semaphore counter is not always decremented. Original MUA-shredded patch from Morten Larsen <mlarsen@broadcom.com>. Signed-off-by:Ralf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: adding comment for ipaq forcing number of ports USB: fix Oops on loading ipaq module since 2.6.26 USB: add a pl2303 device id USB: another option device id USB: don't lose disconnections during suspend USB: fix interrupt disabling for HCDs with shared interrupt handlers USB: New device ID for ftdi_sio driver sisusbvga: Fix oops on disconnect. USB: mass storage: new id for US_SC_CYP_ATACB USB: ohci - record data toggle after unlink USB: ehci - fix timer regression USB: fix cdc-acm resume() OHCI: Fix problem if SM501 and another platform driver is selected
-
Oliver Neukum authored
The reason for forcing a number of ports should be documented. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Oliver Neukum authored
Fixes bugzilla.kernel.org #10868 Signed-off-by:
-
Greg Kroah-Hartman authored
As reported by Ken A Scott <kscott9@sent.com> Cc: Ken A Scott <kscott9@sent.com> Signed-off-by: -
Greg Kroah-Hartman authored
Thanks to umesh b <umesh.kollam@gmail.com> for the information here. Cc: umesh b <umesh.kollam@gmail.com> Signed-off-by: -
Alan Stern authored
This patch (as1111) fixes a bug in the hub driver. When a hub resumes, disconnections that occurred while the hub was suspended are lost. A completely different fix for this problem has already been accepted for 2.6.27; however the problem still needs to be handled in 2.6.26. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
Lukas Hejtmanek <xhejtman@ics.muni.cz> Signed-off-by:
-
Stefan Becker authored
USB: fix interrupt disabling for HCDs with shared interrupt handlers As has been discussed several times on LKML, IRQF_SHARED | IRQF_DISABLED doesn't work reliably, i.e. a shared interrupt handler CAN'T be certain to be called with interrupts disabled. Most USB HCD handlers use IRQF_DISABLED and therefore havoc can break out if they share their interrupt with a handler that doesn't use it. On my test machine the yenta_socket interrupt handler (no IRQF_DISABLED) was registered before ehci_hcd and one uhci_hcd instance. Therefore all usb_hcd_irq() invocations for ehci_hcd and for one uhci_hcd instance happened with interrupts enabled. That led to random lockups as USB core HCD functions that acquire the same spinlock could be called twice from interrupt handlers. This patch updates usb_hcd_irq() to always disable/restore interrupts. usb_add_hcd() will silently remove any IRQF_DISABLED requested from HCD code. Signed-off-by:
Stefan Becker <stefan.becker@nokia.com> Cc: stable <stable@kernel.org> Acked-by:
David Brownell <david-b@pacbell.net> Acked-by:
-
Jon K Hellan authored
Here's a new device ID for the ftdio_sio driver. The diff is with linus's tree as of this morning. The device is the RigExpert Tiny USB Soundcard Transceiver Interface for ham radio. (I didn't actually test this. A fellow ham couldn't get the device to work, and I suggested binding the device ID using sysfs - see "http://jk.ufisa.uninett.no/usb/". However, he had had moved on to other things by then. I guess adding the device ID to the kernel "on spec" won't hurt. The relevant part of cat /proc/bus/usb/devices shows: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=ed22 Rev= 5.00 S: Manufacturer=FTDI S: Product=MixW RigExpert Tiny S: SerialNumber=00000000 C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ) From: Jon K Hellan <hellan@acm.org> Signed-off-by:
-
Will Newton authored
Remove dev_info call on disconnect. The sisusb_dev pointer may have been set to zero by sisusb_delete at this point causing an oops. The message does not provide any extra information over the standard USB subsystem output so removing it does not affect functionality. Signed-off-by:
Will Newton <will.newton@gmail.com> Signed-off-by:
-
matthieu castet authored
CY7C68310 chip also support cypress atacb "ATA command" pass_thru. Signed-off-by:
Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by:
-
David Brownell authored
This patch fixes a problem with OHCI where canceling bulk or interrupt URBs may lose track of the right data toggle. This seems to be a longstanding bug, possibly dating back to the Linux 2.4 kernel, which stayed hidden because (a) about half the time the data toggle bit was correct; (b) canceling such URBs is unusual; and (c) the few drivers which cancel these URBs either [1] do it only as part of shutting down, or [2] have fault recovery logic, which recovers. For those transfer types, the toggle is normally written back into the ED when each TD is retired. But canceling bypasses the mechanism used to retire TDs ... so on average, half the time the toggle bit will be invalid after cancelation. The fix is simple: the toggle state of any canceled TDs are propagated back to the ED in the finish_unlinks function. (Issue found by leonidv11@gmail.com ...) Signed-off-by: -
David Brownell authored
This patch fixes a regression in the EHCI driver's TIMER_IO_WATCHDOG behavior. The patch "USB: EHCI: add separate IAA watchdog timer" changed how that timer is handled, so that short timeouts on the remaining timer (unfortunately, overloaded) would never be used. This takes a more direct approach, reorganizing the code slightly to be explicit about only the I/O watchdog role now being overridable. It also replaces a now-obsolete comment describing older timer behavior. Signed-off-by:
-
Oliver Neukum authored
cdc-acm has - a memory leak in resume() - will fail to reactivate the read code path if this is needed. his corrects it by deleting the useless relict code. Signed-off-by:
-
Ben Dooks authored
If the SM501 and another platform driver, such as the SM501 then we end up defining PLATFORM_DRIVER twice. This patch seperated the SM501 onto a seperate define of SM501_OHCI_DRIVER so that it can be selected without overwriting the original definition. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Acked-by:
-
- 03 Jul, 2008 4 commits
-
-
J. Bruce Fields authored
To return garbage_args, the accept_stat must be 0, and we must have a verifier. So we shouldn't be resetting the write pointer as we reject the call. Also, we must add the two placeholder words here regardless of success of the unwrap, to ensure the output buffer is left in a consistent state for svcauth_gss_release(). This fixes a BUG() in svcauth_gss.c:svcauth_gss_release(). Thanks to Aime Le Rouzic for bug report, debugging help, and testing. Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Tested-by:
Aime Le Rouzic <aime.le-rouzic@bull.net> Signed-off-by:
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] cevt-txx9: Reset timer counter on initialization [MIPS] IP22: Fix crashes due to wrong L1_CACHE_BYTES [MIPS] IP32: Fix unexpected irq 71
-
Steven Rostedt authored
Due to a possible deadlock, the waking of the softirq was pushed outside of the hrtimer base locks. See commit 0c96c597 Unfortunately this allows the task to migrate after setting up the softirq and raising it. Since softirqs run a queue that is per-cpu we may raise the softirq on the wrong CPU and this will keep the queued softirq task from running. To solve this issue, this patch disables preemption around the releasing of the hrtimer lock and raising of the softirq. Signed-off-by:
Steven Rostedt <srostedt@redhat.com> Signed-off-by:
-
Atsushi Nemoto authored
The txx9_tmr_init() will not clear a timer counter register in a certain case. The counter register is cleared on 1->0 transition of TCE bit if CRE=1. So just clearing the TCE bit is not enough. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
