- 13 Feb, 2012 24 commits
-
-
Mark Brown authored
commit f0e8ed85 upstream. Commit 873bd4cb (ASoC: Don't set invalid name string to snd_card->driver field) broke generation of a driver name for all ASoC cards relying on the automatic generation of one. Fix this by using the old default with spaces replaced by underscores. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chanho Min authored
commit cb297a3e upstream. This issue happens under the following conditions: 1. preemption is off 2. __ARCH_WANT_INTERRUPTS_ON_CTXSW is defined 3. RT scheduling class 4. SMP system Sequence is as follows: 1.suppose current task is A. start schedule() 2.task A is enqueued pushable task at the entry of schedule() __schedule prev = rq->curr; ... put_prev_task put_prev_task_rt enqueue_pushable_task 4.pick the task B as next task. next = pick_next_task(rq); 3.rq->curr set to task B and context_switch is started. rq->curr = next; 4.At the entry of context_swtich, release this cpu's rq->lock. context_switch prepare_task_switch prepare_lock_switch raw_spin_unlock_irq(&rq->lock); 5.Shortly after rq->lock is released, interrupt is occurred and start IRQ context 6.try_to_wake_up() which called by ISR acquires rq->lock try_to_wake_up ttwu_remote rq = __task_rq_lock(p) ttwu_do_wakeup(rq, p, wake_flags); task_woken_rt 7.push_rt_task picks the task A which is enqueued before. task_woken_rt push_rt_tasks(rq) next_task = pick_next_pushable_task(rq) 8.At find_lock_lowest_rq(), If double_lock_balance() returns 0, lowest_rq can be the remote rq. (But,If preemption is on, double_lock_balance always return 1 and it does't happen.) push_rt_task find_lock_lowest_rq if (double_lock_balance(rq, lowest_rq)).. 9.find_lock_lowest_rq return the available rq. task A is migrated to the remote cpu/rq. push_rt_task ... deactivate_task(rq, next_task, 0); set_task_cpu(next_task, lowest_rq->cpu); activate_task(lowest_rq, next_task, 0); 10. But, task A is on irq context at this cpu. So, task A is scheduled by two cpus at the same time until restore from IRQ. Task A's stack is corrupted. To fix it, don't migrate an RT task if it's still running. Signed-off-by:
Chanho Min <chanho.min@lge.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/CAOAMb1BHA=5fm7KTewYyke6u-8DP0iUuJMpgQw54vNeXFsGpoQ@mail.gmail.comSigned-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Seth Forshee authored
commit 86698c20 upstream. Polling the outputs when the device is suspended can result in erroneous status updates. Disable output polling during suspend to prevent this from happening. Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Ben Skeggs authored
commit 525895ba upstream. Due to a race it was possible for a fence to be destroyed while another thread was trying to synchronise with it. If this happened in the fallback non-semaphore path, it lead to the following oops due to fence->channel being NULL. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<fa9632ce>] nouveau_fence_update+0xe/0xe0 [nouveau] *pde = a649c067 SMP Modules linked in: fuse nouveau(O) ttm(O) drm_kms_helper(O) drm(O) mxm_wmi video wmi netconsole configfs lockd bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ip6table_filter ip6_tables snd_hda_codec_realtek snd_hda_intel snd_hda_cobinfmt_misc uinput ata_generic pata_acpi pata_aet2c_algo_bit i2c_core [last unloaded: wmi] Pid: 2255, comm: gnome-shell Tainted: G O 3.2.0-0.rc5.git0.1.fc17.i686 #1 System manufacturer System Product Name/M2A-VM EIP: 0060:[<fa9632ce>] EFLAGS: 00010296 CPU: 1 EIP is at nouveau_fence_update+0xe/0xe0 [nouveau] EAX: 00000000 EBX: ddfc6dd0 ECX: dd111580 EDX: 00000000 ESI: 00003e80 EDI: dd111580 EBP: dd121d00 ESP: dd121ce8 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process gnome-shell (pid: 2255, ti=dd120000 task=dd111580 task.ti=dd120000) Stack: 7dc86c76 00000000 00003e80 ddfc6dd0 00003e80 dd111580 dd121d0c fa96371f 00000000 dd121d3c fa963773 dd111580 01000246 000ec53d 00000000 ddfc6dd0 00001f40 00000000 ddfc6dd0 00000010 dc7df840 dd121d6c fa9639a0 00000000 Call Trace: [<fa96371f>] __nouveau_fence_signalled+0x1f/0x30 [nouveau] [<fa963773>] __nouveau_fence_wait+0x43/0xd0 [nouveau] [<fa9639a0>] nouveau_fence_sync+0x1a0/0x1c0 [nouveau] [<fa964046>] validate_list+0x176/0x300 [nouveau] [<f7d9c9c0>] ? ttm_bo_mem_put+0x30/0x30 [ttm] [<fa964b8a>] nouveau_gem_ioctl_pushbuf+0x48a/0xfd0 [nouveau] [<c0406481>] ? die+0x31/0x80 [<f7c93d98>] drm_ioctl+0x388/0x490 [drm] [<c0406481>] ? die+0x31/0x80 [<fa964700>] ? nouveau_gem_ioctl_new+0x150/0x150 [nouveau] [<c0635c7b>] ? file_has_perm+0xcb/0xe0 [<f7c93a10>] ? drm_copy_field+0x80/0x80 [drm] [<c0564f56>] do_vfs_ioctl+0x86/0x5b0 [<c0406481>] ? die+0x31/0x80 [<c0635f22>] ? selinux_file_ioctl+0x62/0x130 [<c0554f30>] ? fget_light+0x30/0x340 [<c05654ef>] sys_ioctl+0x6f/0x80 [<c099e3a4>] syscall_call+0x7/0xb [<c0406481>] ? die+0x31/0x80 [<c0406481>] ? die+0x31/0x80 Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Michel Dänzer authored
commit 1b619250 upstream. The value of this register is transferred to the V_COUNTER register at the beginning of vertical blank. V_COUNTER is the reference for VLINE waits and goes from VIEWPORT_Y_START to VIEWPORT_Y_START+VIEWPORT_HEIGHT during scanout, so if VIEWPORT_Y_START is not 0, V_COUNTER actually went backwards at the beginning of vertical blank, and VLINE waits excluding the whole scanout area could never finish (possibly only if VIEWPORT_Y_START is larger than the length of vertical blank in scanlines). Setting DESKTOP_HEIGHT to the framebuffer height should prevent this for any kind of VLINE wait. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=45329 . Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
-
Mel Gorman authored
mm: compaction: check pfn_valid when entering a new MAX_ORDER_NR_PAGES block during isolation for migration commit 0bf380bc upstream. When isolating for migration, migration starts at the start of a zone which is not necessarily pageblock aligned. Further, it stops isolating when COMPACT_CLUSTER_MAX pages are isolated so migrate_pfn is generally not aligned. This allows isolate_migratepages() to call pfn_to_page() on an invalid PFN which can result in a crash. This was originally reported against a 3.0-based kernel with the following trace in a crash dump. PID: 9902 TASK: d47aecd0 CPU: 0 COMMAND: "memcg_process_s" #0 [d72d3ad0] crash_kexec at c028cfdb #1 [d72d3b24] oops_end at c05c5322 #2 [d72d3b38] __bad_area_nosemaphore at c0227e60 #3 [d72d3bec] bad_area at c0227fb6 #4 [d72d3c00] do_page_fault at c05c72ec #5 [d72d3c80] error_code (via page_fault) at c05c47a4 EAX: 00000000 EBX: 000c0000 ECX: 00000001 EDX: 00000807 EBP: 000c0000 DS: 007b ESI: 00000001 ES: 007b EDI: f3000a80 GS: 6f50 CS: 0060 EIP: c030b15a ERR: ffffffff EFLAGS: 00010002 #6 [d72d3cb4] isolate_migratepages at c030b15a #7 [d72d3d14] zone_watermark_ok at c02d26cb #8 [d72d3d2c] compact_zone at c030b8de #9 [d72d3d68] compact_zone_order at c030bba1 #10 [d72d3db4] try_to_compact_pages at c030bc84 #11 [d72d3ddc] __alloc_pages_direct_compact at c02d61e7 #12 [d72d3e08] __alloc_pages_slowpath at c02d66c7 #13 [d72d3e78] __alloc_pages_nodemask at c02d6a97 #14 [d72d3eb8] alloc_pages_vma at c030a845 #15 [d72d3ed4] do_huge_pmd_anonymous_page at c03178eb #16 [d72d3f00] handle_mm_fault at c02f36c6 #17 [d72d3f30] do_page_fault at c05c70ed #18 [d72d3fb0] error_code (via page_fault) at c05c47a4 EAX: b71ff000 EBX: 00000001 ECX: 00001600 EDX: 00000431 DS: 007b ESI: 08048950 ES: 007b EDI: bfaa3788 SS: 007b ESP: bfaa36e0 EBP: bfaa3828 GS: 6f50 CS: 0073 EIP: 080487c8 ERR: ffffffff EFLAGS: 00010202 It was also reported by Herbert van den Bergh against 3.1-based kernel with the following snippet from the console log. BUG: unable to handle kernel paging request at 01c00008 IP: [<c0522399>] isolate_migratepages+0x119/0x390 *pdpt = 000000002f7ce001 *pde = 0000000000000000 It is expected that it also affects 3.2.x and current mainline. The problem is that pfn_valid is only called on the first PFN being checked and that PFN is not necessarily aligned. Lets say we have a case like this H = MAX_ORDER_NR_PAGES boundary | = pageblock boundary m = cc->migrate_pfn f = cc->free_pfn o = memory hole H------|------H------|----m-Hoooooo|ooooooH-f----|------H The migrate_pfn is just below a memory hole and the free scanner is beyond the hole. When isolate_migratepages started, it scans from migrate_pfn to migrate_pfn+pageblock_nr_pages which is now in a memory hole. It checks pfn_valid() on the first PFN but then scans into the hole where there are not necessarily valid struct pages. This patch ensures that isolate_migratepages calls pfn_valid when necessary. Reported-by:
Herbert van den Bergh <herbert.van.den.bergh@oracle.com> Tested-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Carsten Otte authored
commit 99f02ef1 upstream. Fix a race condition that shows in conjunction with xip_file_fault() when two threads of the same user process fault on the same memory page. In this case, the race winner will install the page table entry and the unlucky loser will cause an oops: xip_file_fault calls vm_insert_pfn (via vm_insert_mixed) which drops out at this check: retval = -EBUSY; if (!pte_none(*pte)) goto out_unlock; The resulting -EBUSY return value will trigger a BUG_ON() in xip_file_fault. This fix simply considers the fault as fixed in this case, because the race winner has successfully installed the pte. [akpm@linux-foundation.org: use conventional (and consistent) comment layout] Reported-by:
David Sadler <dsadler@us.ibm.com> Signed-off-by:
Carsten Otte <cotte@de.ibm.com> Reported-by:
Louis Alex Eisner <leisner@cs.ucsd.edu> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Nikolaus Voss authored
commit bda3a47c upstream. commit 46389470 deleted redundant chan_id and chancnt initialization in dma drivers as this is done in dma_async_device_register(). However, atc_enable_irq() relied on chan_id set before registering the device, what left only channel 0 functional for this driver. This patch introduces atc_enable/disable_chan_irq() as a variant of atc_enable/disable_irq() with the channel as explicit argument. Signed-off-by:
Nikolaus Voss <n.voss@weinmann.de> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by:
-
Jiang Liu authored
commit 55ca6140 upstream. In function pre_handler_kretprobe(), the allocated kretprobe_instance object will get leaked if the entry_handler callback returns non-zero. This may cause all the preallocated kretprobe_instance objects exhausted. This issue can be reproduced by changing samples/kprobes/kretprobe_example.c to probe "mutex_unlock". And the fix is straightforward: just put the allocated kretprobe_instance object back onto the free_instances list. [akpm@linux-foundation.org: use raw_spin_lock/unlock] Signed-off-by:
Jiang Liu <jiang.liu@huawei.com> Acked-by:
Jim Keniston <jkenisto@us.ibm.com> Acked-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Jack Morgenstein authored
commit a6f7feae upstream. In the current code, vendor-specific MADs (e.g with the FDR-10 attribute) are silently dropped by the driver, resulting in timeouts at the sending side and inability to query/configure the relevant feature. However, the ConnectX firmware is able to handle such MADs. For unsupported attributes, the firmware returns a GET_RESPONSE MAD containing an error status. For example, for a FDR-10 node with LID 11: # ibstat mlx4_0 1 CA: 'mlx4_0' Port 1: State: Active Physical state: LinkUp Rate: 40 (FDR10) Base lid: 11 LMC: 0 SM lid: 24 Capability mask: 0x02514868 Port GUID: 0x0002c903002e65d1 Link layer: InfiniBand Extended Port Query (EPI) vendor mad timeouts before the patch: # smpquery MEPI 11 -d ibwarn: [4196] smp_query_via: attr 0xff90 mod 0x0 route Lid 11 ibwarn: [4196] _do_madrpc: retry 1 (timeout 1000 ms) ibwarn: [4196] _do_madrpc: retry 2 (timeout 1000 ms) ibwarn: [4196] _do_madrpc: timeout after 3 retries, 3000 ms ibwarn: [4196] mad_rpc: _do_madrpc failed; dport (Lid 11) smpquery: iberror: [pid 4196] main: failed: operation EPI: ext port info query failed EPI query works OK with the patch: # smpquery MEPI 11 -d ibwarn: [6548] smp_query_via: attr 0xff90 mod 0x0 route Lid 11 ibwarn: [6548] mad_rpc: data offs 64 sz 64 mad data 0000 0000 0000 0001 0000 0001 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 # Ext Port info: Lid 11 port 0 StateChangeEnable:...............0x00 LinkSpeedSupported:..............0x01 LinkSpeedEnabled:................0x01 LinkSpeedActive:.................0x01 Signed-off-by:
Jack Morgenstein <jackm@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Acked-by:
Ira Weiny <weiny2@llnl.gov> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Stefan Richter authored
commit 320cfa6c upstream. The PCIe device FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd FireWire Host Controller [1180:e832] (prog-if 10 [OHCI]) is unable to access attached FireWire devices when MSI is enabled but works if MSI is disabled. http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg28251.html Hence add the "disable MSI" quirks flag for this device, or in fact for safety and simplicity for all current (R5U230, R5U231, R5U240) and future Ricoh PCIe 1394 controllers. Reported-by:
Stefan Thomas <kontrapunktstefan@googlemail.com> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Clemens Ladisch authored
commit d1bb399a upstream. The Audigy's SB1394 controller is actually from Texas Instruments and has the same bus reset packet generation bug, so it needs the same quirk entry. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Oleg Nesterov authored
commit 6d08f2c7 upstream. Once /proc/pid/mem is opened, the memory can't be released until mem_release() even if its owner exits. Change mem_open() to do atomic_inc(mm_count) + mmput(), this only pins mm_struct. Change mem_rw() to do atomic_inc_not_zero(mm_count) before access_remote_vm(), this verifies that this mm is still alive. I am not sure what should mem_rw() return if atomic_inc_not_zero() fails. With this patch it returns zero to match the "mm == NULL" case, may be it should return -EINVAL like it did before e268337d. Perhaps it makes sense to add the additional fatal_signal_pending() check into the main loop, to ensure we do not hold this memory if the target task was oom-killed. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
commit 572d34b9 upstream. No functional changes, cleanup and preparation. mem_read() and mem_write() are very similar. Move this code into the new common helper, mem_rw(), which takes the additional "int write" argument. Signed-off-by:
-
Oleg Nesterov authored
commit 71879d3c upstream. mem_release() can hit mm == NULL, add the necessary check. Signed-off-by:
-
Samuel Thibault authored
commit cbcb8346 upstream. KDFONTOP(GET) currently fails with EIO when being run in a 32bit userland with a 64bit kernel if the font width is not 8. This is because of the setting of the KD_FONT_FLAG_OLD flag, which makes con_font_get return EIO in such case. This flag should *not* be set for KDFONTOP, since it's actually the whole point of this flag (see comment in con_font_set for instance). Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Cc: Arthur Taylor <art@ified.ca> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Signed-off-by:
-
Yegor Yefremov authored
commit 8ef5d844 upstream. following statement can only change device size from 8-bit(0) to 16-bit(1), but not vice versa: regval |= GPMC_CONFIG1_DEVICESIZE(wval); so as this field has 1 reserved bit, that could be used in future, just clear both bits and then OR with the desired value Signed-off-by:
Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Will Deacon authored
commit 8130b9d7 upstream. If we are context switched whilst copying into a thread's vfp_hard_struct then the partial copy may be corrupted by the VFP context switching code (see "ARM: vfp: flush thread hwstate before restoring context from sigframe"). This patch updates the ptrace VFP set code so that the thread state is flushed before the copy, therefore disabling VFP and preventing corruption from occurring. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Dave Martin authored
commit 247f4993 upstream. In a preemptible kernel, vfp_set() can be preempted, causing the hardware VFP context to be switched while the thread vfp state is being read and modified. This leads to a race condition which can cause the thread vfp state to become corrupted if lazy VFP context save occurs due to preemption in between the time thread->vfpstate is read and the time the modified state is written back. This may occur if preemption occurs during the execution of a ptrace() call which modifies the VFP register state of a thread. Such instances should be very rare in most realistic scenarios -- none has been reported, so far as I am aware. Only uniprocessor systems should be affected, since VFP context save is not currently lazy in SMP kernels. The problem was introduced by my earlier patch migrating to use regsets to implement ptrace. This patch does a vfp_sync_hwstate() before reading thread->vfpstate, to make sure that the thread's VFP state is not live in the hardware registers while the registers are modified. Thanks to Will Deacon for spotting this. Signed-off-by:
Dave Martin <dave.martin@linaro.org> Signed-off-by:
-
Will Deacon authored
commit 2af276df upstream. Following execution of a signal handler, we currently restore the VFP context from the ucontext in the signal frame. This involves copying from the user stack into the current thread's vfp_hard_struct and then flushing the new data out to the hardware registers. This is problematic when using a preemptible kernel because we could be context switched whilst updating the vfp_hard_struct. If the current thread has made use of VFP since the last context switch, the VFP notifier will copy from the hardware registers into the vfp_hard_struct, overwriting any data that had been partially copied by the signal code. Disabling preemption across copy_from_user calls is a terrible idea, so instead we move the VFP thread flush *before* we update the vfp_hard_struct. Since the flushing is performed lazily, this has the effect of disabling VFP and clearing the CPU's VFP state pointer, therefore preventing the thread from being updated with stale data on the next context switch. Tested-by:
Peter Maydell <peter.maydell@linaro.org> Signed-off-by:
-
UK KIM authored
commit 114395c6 upstream. Signed-off-by:
UK KIM <w0806.kim@samsung.com> Signed-off-by:
-
Mark Brown authored
commit 77231abe upstream. For optimal performance the single ended line outputs require that the line output VMID buffer be enabled. Signed-off-by:
-
David Henningsson authored
commit 54c2a89f upstream. This typo caused the wrong codec's nid to be checked for wcaps type. As a result, sometimes speakers would duplicate the output sent to HDMI output. BugLink: https://bugs.launchpad.net/bugs/924320Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Shaohua Li authored
commit 3deaa719 upstream. Herbert Poetzl reported a performance regression since 2.6.39. The test is a simple dd read, but with big block size. The reason is: T1: ra (A, A+128k), (A+128k, A+256k) T2: lock_page for page A, submit the 256k T3: hit page A+128K, ra (A+256k, A+384). the range isn't submitted because of plug and there isn't any lock_page till we hit page A+256k because all pages from A to A+256k is in memory T4: hit page A+256k, ra (A+384, A+ 512). Because of plug, the range isn't submitted again. T5: lock_page A+256k, so (A+256k, A+512k) will be submitted. The task is waitting for (A+256k, A+512k) finish. There is no request to disk in T3 and T4, so readahead pipeline breaks. We really don't need block plug for generic_file_aio_read() for buffered I/O. The readahead already has plug and has fine grained control when I/O should be submitted. Deleting plug for buffered I/O fixes the regression. One side effect is plug makes the request size 256k, the size is 128k without it. This is because default ra size is 128k and not a reason we need plug here. Vivek said: : We submit some readahead IO to device request queue but because of nested : plug, queue never gets unplugged. When read logic reaches a page which is : not in page cache, it waits for page to be read from the disk : (lock_page_killable()) and that time we flush the plug list. : : So effectively read ahead logic is kind of broken in parts because of : nested plugging. Removing top level plug (generic_file_aio_read()) for : buffered reads, will allow unplugging queue earlier for readahead. Signed-off-by:
Shaohua Li <shaohua.li@intel.com> Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Reported-by:
Herbert Poetzl <herbert@13thfloor.at> Tested-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
- 06 Feb, 2012 2 commits
-
-
Greg Kroah-Hartman authored
-
Matthew Garrett authored
commit 3c076351 upstream. Right now we forcibly clear ASPM state on all devices if the BIOS indicates that the feature isn't supported. Based on the Microsoft presentation "PCI Express In Depth for Windows Vista and Beyond", I'm starting to think that this may be an error. The implication is that unless the platform grants full control via _OSC, Windows will not touch any PCIe features - including ASPM. In that case clearing ASPM state would be an error unless the platform has granted us that control. This patch reworks the ASPM disabling code such that the actual clearing of state is triggered by a successful handoff of PCIe control to the OS. The general ASPM code undergoes some changes in order to ensure that the ability to clear the bits isn't overridden by ASPM having already been disabled. Further, this theoretically now allows for situations where only a subset of PCIe roots hand over control, leaving the others in the BIOS state. It's difficult to know for sure that this is the right thing to do - there's zero public documentation on the interaction between all of these components. But enough vendors enable ASPM on platforms and then set this bit that it seems likely that they're expecting the OS to leave them alone. Measured to save around 5W on an idle Thinkpad X220. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
- 03 Feb, 2012 14 commits
-
-
Greg Kroah-Hartman authored
-
Johan Hovold authored
commit d1620ca9 upstream. Allow more baud rates to be set in [1M,2M] baud. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Signed-off-by:
-
Johan Hovold authored
commit cdc32fd6 upstream. The newer cp2104 devices require the baud rate to be initialised after power on. Make sure it is set when port is opened. Signed-off-by:
-
Johan Hovold authored
commit e5990874 upstream. Clean up and refactor speed handling. Document baud rate handling for CP210{1,2,4,5,10}. Signed-off-by:
-
Johan Hovold authored
commit 34b76fca upstream. [Based on a patch from Johan, mangled by gregkh to keep things in line] Fix up the variable usage in the set_termios call. Signed-off-by:
-
Johan Hovold authored
commit be125d9c upstream. We do not implement B0 hangup yet so map low baudrates to 300bps. Signed-off-by:
-
Preston Fick authored
commit 7f482fc8 upstream. This fix changes the way baudrates are set on the CP210x devices from Silicon Labs. The CP2101/2/3 will respond to both a GET/SET_BAUDDIV command, and GET/SET_BAUDRATE command, while CP2104 and higher devices only respond to GET/SET_BAUDRATE. The current cp210x.ko driver in kernel version 3.2.0 only implements the GET/SET_BAUDDIV command. This patch implements the two new codes for the GET/SET_BAUDRATE commands. Then there is a change in the way that the baudrate is assigned or retrieved. This is done according to the CP210x USB specification in AN571. This document can be found here: http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/AN571.pdf&src=DocumentationWebPart Sections 5.3/5.4 describe the USB packets for the old baudrate method. Sections 5.5/5.6 describe the USB packets for the new method. This patch also implements the new request scheme, and eliminates the unnecessary baudrate calculations since it uses the "actual baudrate" method. This patch solves the problem reported for the CP2104 in bug 42586, and also keeps support for all other devices (CP2101/2/3). This patchfile is also attached to the bug report on bugzilla.kernel.org. This patch has been developed and test on the 3.2.0 mainline kernel version under Ubuntu 10.11. Signed-off-by:
Preston Fick <preston.fick@silabs.com> [duplicate patch also sent by Johan - gregkh] Signed-off-by:
-
Johan Hovold authored
commit 55b2afbb upstream. Make sure port is fully initialised before calling generic open. Signed-off-by:
-
Renato Caldas authored
commit 791b7d7c upstream. This device is a Oscilloscope/Logic Analizer/Pattern Generator/TDR, using a Silabs CP2103 USB to UART Bridge. Signed-off-by:
Renato Caldas <rmsc@fe.up.pt> Signed-off-by:
-
shawnlu authored
[ Upstream commit 8a622e71 ] md5 key is added in socket through remote address. remote address should be used in finding md5 key when sending out reset packet. Signed-off-by:
shawnlu <shawn.lu@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit 5b35e1e6 ] This commit fixes tcp_trim_head() to recalculate the number of segments in the skb with the skb's existing MSS, so trimming the head causes the skb segment count to be monotonically non-increasing - it should stay the same or go down, but not increase. Previously tcp_trim_head() used the current MSS of the connection. But if there was a decrease in MSS between original transmission and ACK (e.g. due to PMTUD), this could cause tcp_trim_head() to counter-intuitively increase the segment count when trimming bytes off the head of an skb. This violated assumptions in tcp_tso_acked() that tcp_trim_head() only decreases the packet count, so that packets_acked in tcp_tso_acked() could underflow, leading tcp_clean_rtx_queue() to pass u32 pkts_acked values as large as 0xffffffff to ca_ops->pkts_acked(). As an aside, if tcp_trim_head() had really wanted the skb to reflect the current MSS, it should have called tcp_set_skb_tso_segs() unconditionally, since a decrease in MSS would mean that a single-packet skb should now be sliced into multiple segments. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Nandita Dukkipati <nanditad@google.com> Acked-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
David S. Miller authored
[ Upstream commit efc3dbc3 ] rds_sock_info() triggers locking warnings because we try to perform a local_bh_enable() (via sock_i_ino()) while hardware interrupts are disabled (via taking rds_sock_lock). There is no reason for rds_sock_lock to be a hardware IRQ disabling lock, none of these access paths run in hardware interrupt context. Therefore making it a BH disabling lock is safe and sufficient to fix this bug. Reported-by:
Kumar Sanghvi <kumaras@chelsio.com> Reported-by:
Josh Boyer <jwboyer@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d00a9dd2 ] Several problems fixed in this patch : 1) Target of the conditional jump in case a divide by 0 is performed by a bpf is wrong. 2) Must 'generate' the full function prologue/epilogue at pass=0, or else we can stop too early in pass=1 if the proglen doesnt change. (if the increase of prologue/epilogue equals decrease of all instructions length because some jumps are converted to near jumps) 3) Change the wrong length detection at the end of code generation to issue a more explicit message, no need for a full stack trace. Reported-by:
Phil Oester <kernel@linuxace.com> Signed-off-by:
-
James Chapman authored
[ Upstream commit 68315801 ] When a packet is received on an L2TP IP socket (L2TPv3 IP link encapsulation), the l2tpip socket's backlog_rcv function calls xfrm4_policy_check(). This is not necessary, since it was called before the skb was added to the backlog. With CONFIG_NET_NS enabled, xfrm4_policy_check() will oops if skb->dev is null, so this trivial patch removes the call. This bug has always been present, but only when CONFIG_NET_NS is enabled does it cause problems. Most users are probably using UDP encapsulation for L2TP, hence the problem has only recently surfaced. EIP: 0060:[<c12bb62b>] EFLAGS: 00210246 CPU: 0 EIP is at l2tp_ip_recvmsg+0xd4/0x2a7 EAX: 00000001 EBX: d77b5180 ECX: 00000000 EDX: 00200246 ESI: 00000000 EDI: d63cbd30 EBP: d63cbd18 ESP: d63cbcf4 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Call Trace: [<c1218568>] sock_common_recvmsg+0x31/0x46 [<c1215c92>] __sock_recvmsg_nosec+0x45/0x4d [<c12163a1>] __sock_recvmsg+0x31/0x3b [<c1216828>] sock_recvmsg+0x96/0xab [<c10b2693>] ? might_fault+0x47/0x81 [<c10b2693>] ? might_fault+0x47/0x81 [<c1167fd0>] ? _copy_from_user+0x31/0x115 [<c121e8c8>] ? copy_from_user+0x8/0xa [<c121ebd6>] ? verify_iovec+0x3e/0x78 [<c1216604>] __sys_recvmsg+0x10a/0x1aa [<c1216792>] ? sock_recvmsg+0x0/0xab [<c105a99b>] ? __lock_acquire+0xbdf/0xbee [<c12d5a99>] ? do_page_fault+0x193/0x375 [<c10d1200>] ? fcheck_files+0x9b/0xca [<c10d1259>] ? fget_light+0x2a/0x9c [<c1216bbb>] sys_recvmsg+0x2b/0x43 [<c1218145>] sys_socketcall+0x16d/0x1a5 [<c11679f0>] ? trace_hardirqs_on_thunk+0xc/0x10 [<c100305f>] sysenter_do_call+0x12/0x38 Code: c6 05 8c ea a8 c1 01 e8 0c d4 d9 ff 85 f6 74 07 3e ff 86 80 00 00 00 b9 17 b6 2b c1 ba 01 00 00 00 b8 78 ed 48 c1 e8 23 f6 d9 ff <ff> 76 0c 68 28 e3 30 c1 68 2d 44 41 c1 e8 89 57 01 00 83 c4 0c Signed-off-by:
James Chapman <jchapman@katalix.com> Acked-by:
-
