- 11 Jun, 2018 1 commit
-
-
Damien Le Moal authored
commit 4b433924 upstream. Rework sd_zbc_check_zone_size() to avoid a memory leak due to an early return if sd_zbc_report_zones() fails. Reported-by:
David.butterfield <david.butterfield@wdc.com> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Cc: stable@vger.kernel.org Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 05 Jun, 2018 39 commits
-
-
Greg Kroah-Hartman authored
-
Christophe Leroy authored
commit aa0ab02b upstream. On the 8xx, the page size is set in the PMD entry and applies to all pages of the page table pointed by the said PMD entry. When an app has some regular pages allocated (e.g. see below) and tries to mmap() a huge page at a hint address covered by the same PMD entry, the kernel accepts the hint allthough the 8xx cannot handle different page sizes in the same PMD entry. 10000000-10001000 r-xp 00000000 00:0f 2597 /root/malloc 10010000-10011000 rwxp 00000000 00:0f 2597 /root/malloc mmap(0x10080000, 524288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|0x40000, -1, 0) = 0x10080000 This results the app remaining forever in do_page_fault()/hugetlb_fault() and when interrupting that app, we get the following warning: [162980.035629] WARNING: CPU: 0 PID: 2777 at arch/powerpc/mm/hugetlbpage.c:354 hugetlb_free_pgd_range+0xc8/0x1e4 [162980.035699] CPU: 0 PID: 2777 Comm: malloc Tainted: G W 4.14.6 #85 [162980.035744] task: c67e2c00 task.stack: c668e000 [162980.035783] NIP: c000fe18 LR: c00e1eec CTR: c00f90c0 [162980.035830] REGS: c668fc20 TRAP: 0700 Tainted: G W (4.14.6) [162980.035854] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 24044224 XER: 20000000 [162980.036003] [162980.036003] GPR00: c00e1eec c668fcd0 c67e2c00 00000010 c6869410 10080000 00000000 77fb4000 [162980.036003] GPR08: ffff0001 0683c001 00000000 ffffff80 44028228 10018a34 00004008 418004fc [162980.036003] GPR16: c668e000 00040100 c668e000 c06c0000 c668fe78 c668e000 c6835ba0 c668fd48 [162980.036003] GPR24: 00000000 73ffffff 74000000 00000001 77fb4000 100fffff 10100000 10100000 [162980.036743] NIP [c000fe18] hugetlb_free_pgd_range+0xc8/0x1e4 [162980.036839] LR [c00e1eec] free_pgtables+0x12c/0x150 [162980.036861] Call Trace: [162980.036939] [c668fcd0] [c00f0774] unlink_anon_vmas+0x1c4/0x214 (unreliable) [162980.037040] [c668fd10] [c00e1eec] free_pgtables+0x12c/0x150 [162980.037118] [c668fd40] [c00eabac] exit_mmap+0xe8/0x1b4 [162980.037210] [c668fda0] [c0019710] mmput.part.9+0x20/0xd8 [162980.037301] [c668fdb0] [c001ecb0] do_exit+0x1f0/0x93c [162980.037386] [c668fe00] [c001f478] do_group_exit+0x40/0xcc [162980.037479] [c668fe10] [c002a76c] get_signal+0x47c/0x614 [162980.037570] [c668fe70] [c0007840] do_signal+0x54/0x244 [162980.037654] [c668ff30] [c0007ae8] do_notify_resume+0x34/0x88 [162980.037744] [c668ff40] [c000dae8] do_user_signal+0x74/0xc4 [162980.037781] Instruction dump: [162980.037821] 7fdff378 81370000 54a3463a 80890020 7d24182e 7c841a14 712a0004 4082ff94 [162980.038014] 2f890000 419e0010 712a0ff0 408200e0 <0fe00000> 54a9000a 7f984840 419d0094 [162980.038216] ---[ end trace c0ceeca8e7a5800a ]--- [162980.038754] BUG: non-zero nr_ptes on freeing mm: 1 [162985.363322] BUG: non-zero nr_ptes on freeing mm: -1 In order to fix this, this patch uses the address space "slices" implemented for BOOK3S/64 and enhanced to support PPC32 by the preceding patch. This patch modifies the context.id on the 8xx to be in the range [1:16] instead of [0:15] in order to identify context.id == 0 as not initialised contexts as done on BOOK3S This patch activates CONFIG_PPC_MM_SLICES when CONFIG_HUGETLB_PAGE is selected for the 8xx Alltough we could in theory have as many slices as PMD entries, the current slices implementation limits the number of low slices to 16. This limitation is not preventing us to fix the initial issue allthough it is suboptimal. It will be cured in a subsequent patch. Fixes: 4b914286 ("powerpc/8xx: Implement support of hugepages") Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Christophe Leroy authored
commit db3a528d upstream. In preparation for the following patch which will fix an issue on the 8xx by re-using the 'slices', this patch enhances the 'slices' implementation to support 32 bits CPUs. On PPC32, the address space is limited to 4Gbytes, hence only the low slices will be used. The high slices use bitmaps. As bitmap functions are not prepared to handle bitmaps of size 0, this patch ensures that bitmap functions are called only when SLICE_NUM_HIGH is not nul. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Christophe Leroy authored
commit a3286f05 upstream. In preparation for the following patch which will enhance 'slices' for supporting PPC32 in order to fix an issue on hugepages on 8xx, this patch takes out of page*.h all bits related to 'slices' and put them into newly created slice.h header files. While common parts go into asm/slice.h, subarch specific parts go into respective books3s/64/slice.c and nohash/64/slice.c 'slices' Signed-off-by:
-
Christophe Leroy authored
commit 326691ad upstream. bitmap_or() and bitmap_andnot() can work properly with dst identical to src1 or src2. There is no need of an intermediate result bitmap that is copied back to dst in a second step. Signed-off-by:
-
Ondrej Zary authored
commit b3fb2273 upstream. Radiant P845 does not have LVDS, only VGA. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105468Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180309222204.4771-1-linux@rainbow-software.org (cherry picked from commit 7f7105f9) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
commit b9eb9c92 upstream. Delay registering ourselves with the acpi lid notification mechanism until we are registering the connectors after initialisation is complete. This prevents a possibility of trying to handle the lid notification before we are ready with the danger of chasing uninitialised function pointers. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 IP: (null) PGD 0 P4D 0 Oops: 0010 [#1] PREEMPT SMP PTI Modules linked in: arc4(+) iwldvm(+) i915(+) mac80211 i2c_algo_bit coretemp mei_wdt iwlwifi drm_kms_helper kvm_intel wmi_bmof iTCO_wdt iTCO_vendor_support kvm snd_hda_codec_conexant snd_hda_codec_generic drm psmouse cfg80211 irqbypass input_leds pcspkr i2c_i801 snd_hda_intel snd_hda_codec thinkpad_acpi snd_hda_core mei_me lpc_ich snd_hwdep e1000e wmi nvram snd_pcm mei snd_timer shpchp ptp pps_core rfkill syscopyarea snd intel_agp sysfillrect intel_gtt soundcore sysimgblt battery led_class fb_sys_fops ac rtc_cmos agpgart evdev mac_hid acpi_cpufreq ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto crypto_simd glue_helper cryptd aes_x86_64 xts algif_skcipher af_alg dm_crypt dm_mod sd_mod uas usb_storage serio_raw atkbd libps2 ahci libahci uhci_hcd libata scsi_mod ehci_pci ehci_hcd usbcore usb_common i8042 serio CPU: 1 PID: 378 Comm: systemd-logind Not tainted 4.16.8-1-ARCH #1 Hardware name: LENOVO 7454CTO/7454CTO, BIOS 6DET72WW (3.22 ) 10/25/2012 RIP: 0010: (null) RSP: 0018:ffffaf4580c33a18 EFLAGS: 00010287 RAX: 0000000000000000 RBX: ffff947533558000 RCX: 000000000000003e RDX: ffffffffc0aa80c0 RSI: ffffaf4580c33a3c RDI: ffff947534e4c000 RBP: ffff947533558338 R08: ffff947534598930 R09: ffffffffc0a928b1 R10: ffffd8f181d5fd40 R11: 0000000000000000 R12: ffffffffc0a928b1 R13: ffff947533558368 R14: ffffffffc0a928a9 R15: ffff947534e4c000 FS: 00007f3dc4ddb940(0000) GS:ffff947539280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000006e214000 CR4: 00000000000406e0 Call Trace: ? intel_modeset_setup_hw_state+0x385/0xf60 [i915] ? __intel_display_resume+0x1e/0xc0 [i915] ? intel_display_resume+0xcc/0x120 [i915] ? intel_lid_notify+0xbc/0xc0 [i915] ? notifier_call_chain+0x47/0x70 ? blocking_notifier_call_chain+0x3e/0x60 ? acpi_lid_notify_state+0x8f/0x1d0 ? acpi_lid_update_state+0x49/0x70 ? acpi_lid_input_open+0x60/0x90 ? input_open_device+0x5d/0xa0 ? evdev_open+0x1ba/0x1e0 [evdev] ? chrdev_open+0xa3/0x1b0 ? cdev_put.part.0+0x20/0x20 ? do_dentry_open+0x14c/0x300 ? path_openat+0x30c/0x1240 ? current_time+0x16/0x60 ? do_filp_open+0x93/0x100 ? __check_object_size+0xfb/0x180 ? do_sys_open+0x186/0x210 ? do_syscall_64+0x74/0x190 ? entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Code: Bad RIP value. RIP: (null) RSP: ffffaf4580c33a18 CR2: 0000000000000000 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106559 Fixes: c1c7af60 ("drm/i915: force mode set at lid open time") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180518074840.16194-1-chris@chris-wilson.co.uk Cc: stable@vger.kernel.org (cherry picked from commit e578a570) Signed-off-by:
-
Dhinakaran Pandiyan authored
commit bdcc02cf upstream. Entry corresponding to 220 us setup time was missing. I am not aware of any specific bug this fixes, but this could potentially result in enabling PSR on a panel with a higher setup time requirement than supported by the hardware. I verified the value is present in eDP spec versions 1.3, 1.4 and 1.4a. Fixes: 6608804b ("drm/dp: Add drm_dp_psr_setup_time()") Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jose Roberto de Souza <jose.souza@intel.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Tarun Vyas <tarun.vyas@intel.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Alexander Shishkin authored
commit 0ed2424b upstream. Commit d5c435df ("intel_th: msu: Use the real device in case of IOMMU domain allocation") changes dma buffer allocation to use the actual underlying device, but forgets to change the deallocation path, which leads to (if you've got CAP_SYS_RAWIO): > # echo 0,0 > /sys/bus/intel_th/devices/0-msc0/nr_pages > ------------[ cut here ]------------ > kernel BUG at ../linux/drivers/iommu/intel-iommu.c:3670! > CPU: 3 PID: 231 Comm: sh Not tainted 4.17.0-rc1+ #2729 > RIP: 0010:intel_unmap+0x11e/0x130 ... > Call Trace: > intel_free_coherent+0x3e/0x60 > msc_buffer_win_free+0x100/0x160 [intel_th_msu] This patch fixes the buffer deallocation code to use the correct device. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: d5c435df ("intel_th: msu: Use the real device in case of IOMMU domain allocation") Reported-by:
Baofeng Tian <baofeng.tian@intel.com> CC: stable@vger.kernel.org # v4.14+ Signed-off-by:
-
Stanislaw Gruszka authored
commit 52a19236 upstream. This reverts commit fb47ada8. In some situations when we set TXOP_BACKOFF, the probe frame is not sent at all. What it worse then sending probe frame as part of AMPDU and can degrade 11n performance to 11g rates. Cc: stable@vger.kernel.org Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Hugh Dickins authored
commit 2d077d4b upstream. Swapping load on huge=always tmpfs (with khugepaged tuned up to be very eager, but I'm not sure that is relevant) soon hung uninterruptibly, waiting for page lock in shmem_getpage_gfp()'s find_lock_entry(), most often when "cp -a" was trying to write to a smallish file. Debug showed that the page in question was not locked, and page->mapping NULL by now, but page->index consistent with having been in a huge page before. Reproduced in minutes on a 4.15 kernel, even with 4.17's 605ca5ed ("mm/huge_memory.c: reorder operations in __split_huge_page_tail()") added in; but took hours to reproduce on a 4.17 kernel (no idea why). The culprit proved to be the __ClearPageDirty() on tails beyond i_size in __split_huge_page(): the non-atomic __bitoperation may have been safe when 4.8's baa355fd ("thp: file pages support for split_huge_page()") introduced it, but liable to erase PageWaiters after 4.10's 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit"). Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805291841070.3197@eggly.anvils Fixes: 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit") Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Parav Pandit authored
commit a840c93c upstream. When a GID entry is invalid EAGAIN is returned. This is an incorrect error code, there is nothing that will make this GID entry valid again in bounded time. Some user space tools fail incorrectly if EAGAIN is returned here, and this represents a small ABI change from earlier kernels. The first patch in the Fixes list makes entries that were valid before to become invalid, allowing this code to trigger, while the second patch in the Fixes list introduced the wrong EAGAIN. Therefore revert the return result to EINVAL which matches the historical expectations of the ibv_query_gid_type() API of the libibverbs user space library. Cc: <stable@vger.kernel.org> Fixes: 598ff6ba ("IB/core: Refactor GID modify code for RoCE") Fixes: 03db3a2d ("IB/core: Add RoCE GID table management") Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 806e3087 upstream. Commit b5e2ced9 ("stm class: Use vmalloc for the master map") caused a build error on some arches as vmalloc.h was not explicitly included. Fix that by adding it to the list of includes. Fixes: b5e2ced9 ("stm class: Use vmalloc for the master map") Reported-by:
kbuild test robot <lkp@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Alexander Shishkin authored
commit b5e2ced9 upstream. Fengguang is running into a warning from the buddy allocator: > swapper/0: page allocation failure: order:9, mode:0x14040c0(GFP_KERNEL|__GFP_COMP), nodemask=(null) > CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.17.0-rc1 #262 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 > Call Trace: ... > __kmalloc+0x14b/0x180: ____cache_alloc at mm/slab.c:3127 > stm_register_device+0xf3/0x5c0: stm_register_device at drivers/hwtracing/stm/core.c:695 ... Which is basically a result of the stm class trying to allocate ~512kB for the dummy_stm with its default parameters. There's no reason, however, for it not to be vmalloc()ed instead, which is what this patch does. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Bart Van Assche authored
commit c9ddf734 upstream. Since an SRP remote port is attached as a child to shost->shost_gendev and as the only child, the translation from the shost pointer into an rport pointer must happen by looking up the shost child that is an rport. This patch fixes the following KASAN complaint: BUG: KASAN: slab-out-of-bounds in srp_timed_out+0x57/0x110 [scsi_transport_srp] Read of size 4 at addr ffff880035d3fcc0 by task kworker/1:0H/19 CPU: 1 PID: 19 Comm: kworker/1:0H Not tainted 4.16.0-rc3-dbg+ #1 Workqueue: kblockd blk_mq_timeout_work Call Trace: dump_stack+0x85/0xc7 print_address_description+0x65/0x270 kasan_report+0x231/0x350 srp_timed_out+0x57/0x110 [scsi_transport_srp] scsi_times_out+0xc7/0x3f0 [scsi_mod] blk_mq_terminate_expired+0xc2/0x140 bt_iter+0xbc/0xd0 blk_mq_queue_tag_busy_iter+0x1c7/0x350 blk_mq_timeout_work+0x325/0x3f0 process_one_work+0x441/0xa50 worker_thread+0x76/0x6c0 kthread+0x1b2/0x1d0 ret_from_fork+0x24/0x30 Fixes: e68ca752 ("scsi_transport_srp: Reduce failover time") Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Maciej W. Rozycki authored
commit 28e4213d upstream. Having PR_FP_MODE_FRE (i.e. Config5.FRE) set without PR_FP_MODE_FR (i.e. Status.FR) is not supported as the lone purpose of Config5.FRE is to emulate Status.FR=0 handling on FPU hardware that has Status.FR=1 hardwired[1][2]. Also we do not handle this case elsewhere, and assume throughout our code that TIF_HYBRID_FPREGS and TIF_32BIT_FPREGS cannot be set both at once for a task, leading to inconsistent behaviour if this does happen. Return unsuccessfully then from prctl(2) PR_SET_FP_MODE calls requesting PR_FP_MODE_FRE to be set with PR_FP_MODE_FR clear. This corresponds to modes allowed by `mips_set_personality_fp'. References: [1] "MIPS Architecture For Programmers, Vol. III: MIPS32 / microMIPS32 Privileged Resource Architecture", Imagination Technologies, Document Number: MD00090, Revision 6.02, July 10, 2015, Table 9.69 "Config5 Register Field Descriptions", p. 262 [2] "MIPS Architecture For Programmers, Volume III: MIPS64 / microMIPS64 Privileged Resource Architecture", Imagination Technologies, Document Number: MD00091, Revision 6.03, December 22, 2015, Table 9.72 "Config5 Register Field Descriptions", p. 288 Fixes: 9791554b ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS") Signed-off-by:
Maciej W. Rozycki <macro@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.0+ Patchwork: https://patchwork.linux-mips.org/patch/19327/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Maciej W. Rozycki authored
commit c7e81462 upstream. Use 64-bit accesses for 64-bit floating-point general registers with PTRACE_PEEKUSR, removing the truncation of their upper halves in the FR=1 mode, caused by commit bbd426f5 ("MIPS: Simplify FP context access"), which inadvertently switched them to using 32-bit accesses. The PTRACE_POKEUSR side is fine as it's never been broken and continues using 64-bit accesses. Fixes: bbd426f5 ("MIPS: Simplify FP context access") Signed-off-by:
-
Mathias Kresin authored
commit 32795631 upstream. While doing a global software reset, these bits are not cleared and let some bootloader fail to initialise the GPHYs. The bootloader don't expect the GPHYs in reset, as they aren't during power on. The asserts were a workaround for a wrong syscon-reboot mask. With a mask set which includes the GPHY resets, these resets aren't required any more. Fixes: 12653414 ("MIPS: lantiq: Add a GPHY driver which uses the RCU syscon-mfd") Signed-off-by:
Mathias Kresin <dev@kresin.me> Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.14+ Patchwork: https://patchwork.linux-mips.org/patch/19003/ [jhogan@kernel.org: Fix build warnings] Signed-off-by:
-
Eugen Hristev authored
commit 76974ef9 upstream. We need to select the buffer code, otherwise we get build errors with undefined functions on the trigger and buffer, if we select just IIO and then AT91_SAMA5D2_ADC from menuconfig This adds a Kconfig 'select' statement like other ADC drivers have it already. Fixes: 5e1a1da0 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support") Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Martin Kelly authored
commit 3d13de4b upstream. Currently, the following causes a kernel OOPS in memcpy: echo 1073741825 > buffer/length echo 1 > buffer/enable Note that using 1073741824 instead of 1073741825 causes "write error: Cannot allocate memory" but no OOPS. This is because 1073741824 == 2^30 and 1073741825 == 2^30+1. Since kfifo rounds up to the nearest power of 2, it will actually call kmalloc with roundup_pow_of_two(length) * bytes_per_datum. Using length == 1073741825 and bytes_per_datum == 2, we get: kmalloc(roundup_pow_of_two(1073741825) * 2 or kmalloc(2147483648 * 2) or kmalloc(4294967296) or kmalloc(UINT_MAX + 1) so this overflows to 0, causing kmalloc to return ZERO_SIZE_PTR and subsequent memcpy to fail once the device is enabled. Fix this by checking for overflow prior to allocating a kfifo. With this check added, the above code returns -EINVAL when enabling the buffer, rather than causing an OOPS. Signed-off-by:
Martin Kelly <mkelly@xevo.com> cc: <Stable@vger.kernel.org> Signed-off-by:
-
Martin Kelly authored
commit c043ec1c upstream. Currently, we use int for buffer length and bytes_per_datum. However, kfifo uses unsigned int for length and size_t for element size. We need to make sure these matches or we will have bugs related to overflow (in the range between INT_MAX and UINT_MAX for length, for example). In addition, set_bytes_per_datum uses size_t while bytes_per_datum is an int, which would cause bugs for large values of bytes_per_datum. Change buffer length to use unsigned int and bytes_per_datum to use size_t. Signed-off-by:
-
Michael Nosthoff authored
commit 490fba90 upstream. This commit is a follow-up to changes made to ad_sigma_delta.h in staging: iio: ad7192: implement IIO_CHAN_INFO_SAMP_FREQ which broke ad7793 as it was not altered to match those changes. This driver predates the availability of IIO_CHAN_INFO_SAMP_FREQ attribute wherein usage has some advantages like it can be accessed by in-kernel consumers as well as reduces the code size. Therefore, use IIO_CHAN_INFO_SAMP_FREQ to implement the sampling_frequency attribute instead of using IIO_DEV_ATTR_SAMP_FREQ() macro. Move code from the functions associated with IIO_DEV_ATTR_SAMP_FREQ() into respective read and write hooks with the mask set to IIO_CHAN_INFO_SAMP_FREQ. Fixes: a13e831f ("staging: iio: ad7192: implement IIO_CHAN_INFO_SAMP_FREQ") Signed-off-by:
Michael Nosthoff <committed@heine.so> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Eric Dumazet authored
commit 607065ba upstream. When using large tcp_rmem[2] values (I did tests with 500 MB), I noticed overflows while computing rcvwin. Lets fix this before the following patch. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Wei Wang <weiwan@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [Backport: sysctl_tcp_rmem is not Namespace-ify'd in older kernels] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Sodagudi Prasad authored
commit 0a5f4176 upstream. Currently, GCC disables -Wunused-const-variable, but not -Wunused-variable, so warns unused variables if they are non-constant. While, Clang does not warn unused variables at all regardless of the const qualifier because -Wno-unused-const-variable is implied by the stronger option -Wno-unused-variable. Disable -Wunused-const-variable instead of -Wunused-variable so that GCC and Clang work in the same way. Signed-off-by:
Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Colin Ian King authored
commit d3b56c56 upstream. Pointer request is being assigned but never used, so remove it. Cleans up the clang warning: drivers/platform/chrome/cros_ec_lpc.c:68:2: warning: Value stored to 'request' is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Colin Ian King authored
commit 271ef65b upstream. The pointer dma_dev_name is assigned but never read, it is redundant and can therefore be removed. Cleans up clang warning: sound/soc/intel/common/sst-firmware.c:288:3: warning: Value stored to 'dma_dev_name' is never read Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Matthias Kaehlcke authored
commit fb239c12 upstream. In _rtl92c_get_txpower_writeval_by_regulatory() the variable writeVal is assigned to itself in an if ... else statement, apparently only to document that the branch condition is handled and that a previously read value should be returned unmodified. The self-assignment causes clang to raise the following warning: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c:304:13: error: explicitly assigning value of variable of type 'u32' (aka 'unsigned int') to itself [-Werror,-Wself-assign] writeVal = writeVal; Delete the branch with the self-assignment. Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
-
Matthias Kaehlcke authored
commit 42b5122e upstream. In several locations the driver uses AMD_CG_STATE_UNGATE (type enum amd_clockgating_state) instead of AMD_PG_STATE_UNGATE (type enum amd_powergating_stat) and vice versa. Both constants have the same value, so this doesn't cause any problems, but we still want to pass the correct type. Fixing the mismatch resolves multiple warnings like this when building with clang: drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/cz_clockpowergating.c:169:7: error: implicit conversion from enumeration type 'enum amd_powergating_state' to different enumeration type 'enum amd_clockgating_state' [-Werror,-Wenum-conversion] AMD_PG_STATE_UNGATE); Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Colin Ian King authored
commit 531beb06 upstream. sg_table is being initialized and is never read before it is updated again later on, hence making the initialization redundant. Remove the initialization. Detected by clang scan-build: "warning: Value stored to 'sg_table' during its initialization is never read" Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170914230516.6056-1-colin.king@canonical.com Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Chris Wilson authored
commit cad9946c upstream. When we do a locked idle we know that afterwards all requests have been completed and the engines have been cleared of tasks. For whatever reason, this doesn't always happen and we may go into a suspend with ELSP still full, and this causes an issue upon resume as we get very, very confused. If the engines refuse to idle, mark the device as wedged. In the process we get rid of the maybe unused open-coded version of wait_for_engines reported by Nick Desaulniers and Matthias Kaehlcke. v2: Suppress the -EIO before suspend, but keep it for seqno wrap. References: https://bugs.freedesktop.org/show_bug.cgi?id=101891 References: https://bugs.freedesktop.org/show_bug.cgi?id=102456Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Nick Desaulniers authored
commit df16aaac upstream. When compiling with `make CC=clang HOSTCC=clang`, I was seeing warnings that clang did not recognize -fno-delete-null-pointer-checks for HOSTCC targets. These were added in commit 61163efa ("kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang"). Clang does not support -fno-delete-null-pointer-checks, so adding it to HOSTCFLAGS if HOSTCC is clang does not make sense. It's not clear why the other warnings were disabled, and just for HOSTCFLAGS, but I can remove them, add -Werror to HOSTCFLAGS and compile with clang just fine. Suggested-by:
Nick Desaulniers <nick.desaulniers@gmail.com> Signed-off-by:
-
Eric Biggers authored
commit 81459649 upstream. wiphy names were recently limited to 128 bytes by commit a7cfebcb ("cfg80211: limit wiphy names to 128 bytes"). As it turns out though, this isn't sufficient because dev_vprintk_emit() needs the syslog header string "SUBSYSTEM=ieee80211\0DEVICE=+ieee80211:$devname" to fit into 128 bytes. This triggered the "device/subsystem name too long" WARN when the device name was >= 90 bytes. As before, this was reproduced by syzbot by sending an HWSIM_CMD_NEW_RADIO command to the MAC80211_HWSIM generic netlink family. Fix it by further limiting wiphy names to 64 bytes. Reported-by: syzbot+e64565577af34b3768dc@syzkaller.appspotmail.com Fixes: a7cfebcb ("cfg80211: limit wiphy names to 128 bytes") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Sachin Grover authored
commit efe3de79 upstream. Call trace: [<ffffff9203a8d7a8>] dump_backtrace+0x0/0x428 [<ffffff9203a8dbf8>] show_stack+0x28/0x38 [<ffffff920409bfb8>] dump_stack+0xd4/0x124 [<ffffff9203d187e8>] print_address_description+0x68/0x258 [<ffffff9203d18c00>] kasan_report.part.2+0x228/0x2f0 [<ffffff9203d1927c>] kasan_report+0x5c/0x70 [<ffffff9203d1776c>] check_memory_region+0x12c/0x1c0 [<ffffff9203d17cdc>] memcpy+0x34/0x68 [<ffffff9203d75348>] xattr_getsecurity+0xe0/0x160 [<ffffff9203d75490>] vfs_getxattr+0xc8/0x120 [<ffffff9203d75d68>] getxattr+0x100/0x2c8 [<ffffff9203d76fb4>] SyS_fgetxattr+0x64/0xa0 [<ffffff9203a83f70>] el0_svc_naked+0x24/0x28 If user get root access and calls security.selinux setxattr() with an embedded NUL on a file and then if some process performs a getxattr() on that file with a length greater than the actual length of the string, it would result in a panic. To fix this, add the actual length of the string to the security context instead of the length passed by the userspace process. Signed-off-by:
Sachin Grover <sgrover@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 2824f503 upstream. The snapshot trigger currently only affects the main ring buffer, even when it is used by the instances. This can be confusing as the snapshot trigger is listed in the instance. > # cd /sys/kernel/tracing > # mkdir instances/foo > # echo snapshot > instances/foo/events/syscalls/sys_enter_fchownat/trigger > # echo top buffer > trace_marker > # echo foo buffer > instances/foo/trace_marker > # touch /tmp/bar > # chown rostedt /tmp/bar > # cat instances/foo/snapshot # tracer: nop # # # * Snapshot is freed * # # Snapshot commands: # echo 0 > snapshot : Clears and frees snapshot buffer # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated. # Takes a snapshot of the main buffer. # echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free) # (Doesn't have to be '2' works with any number that # is not a '0' or '1') > # cat snapshot # tracer: nop # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | bash-1189 [000] .... 111.488323: tracing_mark_write: top buffer Not only did the snapshot occur in the top level buffer, but the instance snapshot buffer should have been allocated, and it is still free. Cc: stable@vger.kernel.org Fixes: 85f2b082 ("tracing: Add basic event trigger framework") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 86b389ff upstream. If a instance has an event trigger enabled when it is freed, it could cause an access of free memory. Here's the case that crashes: # cd /sys/kernel/tracing # mkdir instances/foo # echo snapshot > instances/foo/events/initcall/initcall_start/trigger # rmdir instances/foo Would produce: general protection fault: 0000 [#1] PREEMPT SMP PTI Modules linked in: tun bridge ... CPU: 5 PID: 6203 Comm: rmdir Tainted: G W 4.17.0-rc4-test+ #933 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:clear_event_triggers+0x3b/0x70 RSP: 0018:ffffc90003783de0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b2b RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800c7130ba0 RBP: ffffc90003783e00 R08: ffff8801131993f8 R09: 0000000100230016 R10: ffffc90003783d80 R11: 0000000000000000 R12: ffff8800c7130ba0 R13: ffff8800c7130bd8 R14: ffff8800cc093768 R15: 00000000ffffff9c FS: 00007f6f4aa86700(0000) GS:ffff88011eb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6f4a5aed60 CR3: 00000000cd552001 CR4: 00000000001606e0 Call Trace: event_trace_del_tracer+0x2a/0xc5 instance_rmdir+0x15c/0x200 tracefs_syscall_rmdir+0x52/0x90 vfs_rmdir+0xdb/0x160 do_rmdir+0x16d/0x1c0 __x64_sys_rmdir+0x17/0x20 do_syscall_64+0x55/0x1a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe This was due to the call the clears out the triggers when an instance is being deleted not removing the trigger from the link list. Cc: stable@vger.kernel.org Fixes: 85f2b082 ("tracing: Add basic event trigger framework") Signed-off-by:
-
Benjamin Tissoires authored
commit 40f7090b upstream. New ICs (like the one on the Lenovo T480s) answer to ETP_SMBUS_IAP_VERSION_CMD 4 bytes instead of 3. This corrupts the stack as i2c_smbus_read_block_data() uses the values returned by the i2c device to know how many data it need to return. i2c_smbus_read_block_data() can read up to 32 bytes (I2C_SMBUS_BLOCK_MAX) and there is no safeguard on how many bytes are provided in the return value. Ensure we always have enough space for any future firmware. Also 0-initialize the values to prevent any access to uninitialized memory. Cc: <stable@vger.kernel.org> # v4.4.x, v4.9.x, v4.14.x, v4.15.x, v4.16.x Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by:
KT Liao <kt.liao@emc.com.tw> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Benjamin Tissoires authored
commit ad8fb554 upstream. This time, Lenovo decided to go with different pieces in its latest series of Thinkpads. For those we have been able to test: - the T480 is using Synaptics with an IBM trackpoint -> it behaves properly with or without intertouch, there is no point not using RMI4 - the X1 Carbon 6th gen is using Synaptics with an IBM trackpoint -> the touchpad doesn't behave properly under PS/2 so we have to switch it to RMI4 if we do not want to have disappointed users - the X280 is using Synaptics with an ALPS trackpoint -> the recent fixes in the trackpoint handling fixed it so upstream now works fine with or without RMI4, and there is no point not using RMI4 - the T480s is using an Elan touchpad, so that's a different story Cc: <stable@vger.kernel.org> # v4.14.x, v4.15.x, v4.16.x Signed-off-by:
-
Aaron Ma authored
commit 5717a09a upstream. Synaptics devices reported it has Intertouch support, and it fails via PS/2 as following logs: psmouse serio2: Failed to reset mouse on synaptics-pt/serio0 psmouse serio2: Failed to enable mouse on synaptics-pt/serio0 Set these new devices to use SMBus to fix this issue, then they report SMBus version 3 is using, patch: https://patchwork.kernel.org/patch/9989547/ enabled SMBus ver 3 and makes synaptics devices work fine on SMBus mode. Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Edvard Holst authored
commit 15e2cffe upstream. Lenovo use two different trackpoints in the fifth generation Thinkpad X1 Carbon. Both are accessible over SMBUS/RMI but the pnpIDs are missing. This patch is for the Elantech trackpoint specifically which also reports SMB version 3 so rmi_smbus needs to be updated in order to handle it. For the record, I was not the first one to come up with this patch as it has been floating around the internet for a while now. However, I have spent significant time with testing and my efforts to find the original author of the patch have been unsuccessful. Signed-off-by:
Edvard Holst <edvard.holst@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
