- 31 May, 2012 2 commits
-
-
Namhyung Kim authored
We faced segmentation fault on perf top -G at very high sampling rate due to a corrupted callchain. While the root cause was not revealed (I failed to figure it out), this patch tries to protect us from the segfault on such cases. Reported-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Namhyung Kim <namhyung.kim@lge.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sunjin Yang <fan4326@gmail.com> Link: http://lkml.kernel.org/r/1338443007-24857-2-git-send-email-namhyung.kim@lge.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
perf top -G has a race on callchain cursor between main thread and display thread. Since the callchain cursors are used locally make them thread-local data would solve the problem. Signed-off-by:
Namhyung Kim <namhyung.kim@lge.com> Reported-by:
Sunjin Yang <fan4326@gmail.com> Suggested-by:
Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sunjin Yang <fan4326@gmail.com> Link: http://lkml.kernel.org/r/1338443007-24857-1-git-send-email-namhyung.kim@lge.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 30 May, 2012 18 commits
-
-
Avik Sil authored
Some Distributions may lack "less" package being included by default, e.g., Linaro nano rootfs. In those cases use the portable "pager" command instead of "less". Signed-off-by:
Avik Sil <avik.sil@linaro.org> Acked-by:
Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338287725-26382-1-git-send-email-avik.sil@linaro.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
The patch series that introduced the top level tools/ makefile and the libtraceevent broke this feature where files needed to build in a detached tarball were not included in the MANIFEST file and thus not included in the tarball. Fix it by adding the relevant files to the MANIFEST. Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/n/tip-z3mjj74927xvqwhlmu18kj80@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
David Ahern authored
$ perf script -i /tmp/perf.data ... gcc 13623 544315.062858: context-switches: ffffffff815f65c9 __schedule ([kernel.kallsyms]) ffffffff81087cea __cond_resched ([kernel.kallsyms]) ffffffff815f6b92 _cond_resched ([kernel.kallsyms]) ffffffff815fb87a do_page_fault ([kernel.kallsyms]) ffffffff815f8465 page_fault ([kernel.kallsyms]) 2b7a71ea0303 _dl_lookup_symbol_x ([kernel.kallsyms]) 2b7a71ea1eb5 _dl_relocate_object ([kernel.kallsyms]) 2b7a71e99b2e dl_main ([kernel.kallsyms]) 2b7a71eab7f4 _dl_sysdep_start ([kernel.kallsyms]) All DSO's in a callchain are printed as [kernel.kallsyms]. git bisect chased it to: 547a92e0 is the first bad commit commit 547a92e0 Author: Akihiro Nagai <akihiro.nagai.hw@hitachi.com> Date: Mon Jan 30 13:42:57 2012 +0900 perf script: Unify the expressions indicating "unknown" The perf script command uses various expressions to indicate "unknown". It is unfriendly for user scripts to parse it. So, this patch unifies the expressions to "[unknown]". Looks like a copy-paste in that the other references use al.map but this one should be node->map. With this patch you get: $ perf script -i /tmp/perf.data ... gcc 13623 544315.062858: context-switches: ffffffff815f65c9 __schedule ([kernel.kallsyms]) ffffffff81087cea __cond_resched ([kernel.kallsyms]) ffffffff815f6b92 _cond_resched ([kernel.kallsyms]) ffffffff815fb87a do_page_fault ([kernel.kallsyms]) ffffffff815f8465 page_fault ([kernel.kallsyms]) 2b7a71ea0303 _dl_lookup_symbol_x (/lib64/ld-2.14.90.so) 2b7a71ea1eb5 _dl_relocate_object (/lib64/ld-2.14.90.so) 2b7a71e99b2e dl_main (/lib64/ld-2.14.90.so) 2b7a71eab7f4 _dl_sysdep_start (/lib64/ld-2.14.90.so) Signed-off-by:
David Ahern <dsahern@gmail.com> Cc: Akihiro Nagai <akihiro.nagai.hw@hitachi.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1338353906-60706-1-git-send-email-dsahern@gmail.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
When no event is specified the tools use perf_evlist__add_default(), that will call event_attr_init to initialize the KVM exclusion bits. When the change was made to the tools so that by default guest samples would be excluded, the changes were made just to the parsing routines and to perf_evlist__add_default(), not to perf_evlist__add_attrs, that is used so far just by perf stat to add multiple events, according to the level of detail specified. Recently the tools were changed to reconstruct the event name from all the details in perf_event_attr, not just from .type and .config, but taking into account all the feature bits (.exclude_{guest,host,user,kernel,etc}, .precise_ip, etc). That is when we noticed that the default for perf stat wasn't the one for the rest of the tools, i.e. the .exclude_guest bit wasn't being set. I.e. the default, that doesn't call event_attr_init was showing the :HG modifier: $ perf stat usleep 1 Performance counter stats for 'usleep 1': 0.942119 task-clock # 0.454 CPUs utilized 1 context-switches # 0.001 M/sec 0 CPU-migrations # 0.000 K/sec 126 page-faults # 0.134 M/sec 693,193 cycles:HG # 0.736 GHz [40.11%] 407,461 stalled-cycles-frontend:HG # 58.78% frontend cycles idle [72.29%] 365,403 stalled-cycles-backend:HG # 52.71% backend cycles idle 465,982 instructions:HG # 0.67 insns per cycle # 0.87 stalled cycles per insn 89,760 branches:HG # 95.275 M/sec 6,178 branch-misses:HG # 6.88% of all branches 0.002077228 seconds time elapsed While if one explicitely specifies the same events, which will make the parsing code to be called and thus event_attr_init is called: $ perf stat -e task-clock,context-switches,migrations,page-faults,cycles,stalled-cycles-frontend,stalled-cycles-backend,instructions,branches,branch-misses usleep 1 Performance counter stats for 'usleep 1': 1.040349 task-clock # 0.500 CPUs utilized 2 context-switches # 0.002 M/sec 0 CPU-migrations # 0.000 K/sec 127 page-faults # 0.122 M/sec 587,966 cycles # 0.565 GHz [13.18%] 459,167 stalled-cycles-frontend # 78.09% frontend cycles idle 390,249 stalled-cycles-backend # 66.37% backend cycles idle 504,006 instructions # 0.86 insns per cycle # 0.91 stalled cycles per insn 96,455 branches # 92.714 M/sec 6,522 branch-misses # 6.76% of all branches [96.12%] 0.002078681 seconds time elapsed Fix it by introducing a perf_evlist__add_default_attrs method that will call evlist_attr_init in all the perf_event_attr entries before adding the events. Reported-by:
Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-4eysr236r0pgiyum9epwxw7s@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Its 'H', not 'h'. The later is for getting to the help window. Reported-by:
Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-7zvwphhm815y2zczoxgstzuf@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
In non symbolic views, i.e. --sort without "symbol", as in: perf report --sort comm We're segfaulting in the --tui because we're testing the symbol resolved and then trying to use the symbol on the histogram entry where we're coalescing all hits for a COMM, and the first hist_entry for a comm may have a NULL symbol, i.e. the RIP didn't resolve to any symbol. In this case we're segfaulting, fix it by testing against the symbol in the histogram entry. Reported-by:
William Cohen <wcohen@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-8ylwubbcmu27ucc9ffrku3yv@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ingo Molnar authored
Merge back Linus's latest branch so that we pick up the uprobes changes. ( I tested this branch locally and while it's one from the middle of the merge window it's a good one to base further work off. ) Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Annotation fixes/improvements from Arnaldo Carvalho de Melo: . Make the annotatation toggles (hide_src_code, jump_arrows, use_offset, etc) global so that navigation doesn't resets them on new annotations. . Introduce an '[annotate]' config file section to allow permanent changes to the annotate browser defaults. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Fixes for perf/urgent from Arnaldo Carvalho de Melo: * Fix fallback to --stdio when TUI not supported, from Namhyung Kim. * Use right cast for pointers/long in libtraceevent, from Namhyung Kim. * Be consistent on using the right error reporting interface for fatal errors, from Namhyung Kim. * Fix fallback to --stdio when TUI not supported, from Namhyung Kim. * Use the right index in asm only view in the annotate browser. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 trampoline rework from H. Peter Anvin: "This code reworks all the "trampoline"/"realmode" code (various bits that need to live in the first megabyte of memory, most but not all of which runs in real mode at some point) in the kernel into a single object. The main reason for doing this is that it eliminates the last place in the kernel where we needed pages to be mapped RWX. This code separates all that code into proper R/RW/RX pages." Fix up conflicts in arch/x86/kernel/Makefile (mca removed next to reboot code), and arch/x86/kernel/reboot.c (reboot code moved around in one branch, modified in this one), and arch/x86/tools/relocs.c (mostly same code came in earlier due to working around the ld bugs just before the 3.4 release). Also remove stale x86-relocs entry from scripts/.gitignore as per Peter Anvin. * commit '61f54461': (36 commits) x86, realmode: Move end signature into header.S x86, relocs: When printing an error, say relative or absolute x86, relocs: More relocations which may end up as absolute x86, relocs: Workaround for binutils 2.22.52.0.1 section bug xen-acpi-processor: Add missing #include <xen/xen.h> acpi, bgrd: Add missing <linux/io.h> to drivers/acpi/bgrt.c x86, realmode: Change EFER to a single u64 field x86, realmode: Move kernel/realmode.c to realmode/init.c x86, realmode: Move not-common bits out of trampoline_common.S x86, realmode: Mask out EFER.LMA when saving trampoline EFER x86, realmode: Fix no cache bits test in reboot_32.S x86, realmode: Make sure all generated files are listed in targets x86, realmode: build fix: remove duplicate build x86, realmode: read cr4 and EFER from kernel for 64-bit trampoline x86, realmode: fixes compilation issue in tboot.c x86, realmode: move relocs from scripts/ to arch/x86/tools x86, realmode: header for trampoline code x86, realmode: flattened rm hierachy x86, realmode: don't copy real_mode_header x86, realmode: fix 64-bit wakeup sequence ...
-
Arnaldo Carvalho de Melo authored
Stop using this python/OOP convention, doesn't really helps. Will do more from time to time till we get it cleaned up in all of /perf. Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-5dyxyb8o0gf4yndk27kafbd1@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edacLinus Torvalds authored
Pull EDAC internal API changes from Mauro Carvalho Chehab: "This changeset is the first part of a series of patches that fixes the EDAC sybsystem. On this set, it changes the Kernel EDAC API in order to properly represent the Intel i3/i5/i7, Xeon 3xxx/5xxx/7xxx, and Intel E5-xxxx memory controllers. The EDAC core used to assume that: - the DRAM chip select pin is directly accessed by the memory controller - when multiple channels are used, they're all filled with the same type of memory. None of the above premises is true on Intel memory controllers since 2002, when RAMBUS and FB-DIMMs were introduced, and Advanced Memory Buffer or by some similar technologies hides the direct access to the DRAM pins. So, the existing drivers for those chipsets had to lie to the EDAC core, in general telling that just one channel is filled. That produces some hard to understand error messages like: EDAC MC0: CE row 3, channel 0, label "DIMM1": 1 Unknown error(s): memory read error on FATAL area : cpu=0 Err=0008:00c2 (ch=2), addr = 0xad1f73480 => socket=0, Channel=0(mask=2), rank=1 The location information there (row3 channel 0) is completely bogus: it has no physical meaning, and are just some random values that the driver uses to talk with the EDAC core. The error actually happened at CPU socket 0, channel 0, slot 1, but this is not reported anywhere, as the EDAC core doesn't know anything about the memory layout. So, only advanced users that know how the EDAC driver works and that tests their systems to see how DIMMs are mapped can actually benefit for such error logs. This patch series fixes the error report logic, in order to allow the EDAC to expose the memory architecture used by them to the EDAC core. So, as the EDAC core now understands how the memory is organized, it can provide an useful report: EDAC MC0: CE memory read error on DIMM1 (channel:0 slot:1 page:0x364b1b offset:0x600 grain:32 syndrome:0x0 - count:1 area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:4) The location of the DIMM where the error happened is reported by "MC0" (cpu socket #0), at "channel:0 slot:1" location, and matches the physical location of the DIMM. There are two remaining issues not covered by this patch series: - The EDAC sysfs API will still report bogus values. So, userspace tools like edac-utils will still use the bogus data; - Add a new tracepoint-based way to get the binary information about the errors. Those are on a second series of patches (also at -next), but will probably miss the train for 3.5, due to the slow review process." Fix up trivial conflict (due to spelling correction of removed code) in drivers/edac/edac_device.c * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (42 commits) i7core: fix ranks information at the per-channel struct i5000: Fix the fatal error handling i5100_edac: Fix a warning when compiled with 32 bits i82975x_edac: Test nr_pages earlier to save a few CPU cycles e752x_edac: provide more info about how DIMMS/ranks are mapped i5000_edac: Fix the logic that retrieves memory information i5400_edac: improve debug messages to better represent the filled memory edac: Cleanup the logs for i7core and sb edac drivers edac: Initialize the dimm label with the known information edac: Remove the legacy EDAC ABI x38_edac: convert driver to use the new edac ABI tile_edac: convert driver to use the new edac ABI sb_edac: convert driver to use the new edac ABI r82600_edac: convert driver to use the new edac ABI ppc4xx_edac: convert driver to use the new edac ABI pasemi_edac: convert driver to use the new edac ABI mv64x60_edac: convert driver to use the new edac ABI mpc85xx_edac: convert driver to use the new edac ABI i82975x_edac: convert driver to use the new edac ABI i82875p_edac: convert driver to use the new edac ABI ...
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "The whole series has been sitting in -next for quite a while with no complaints. The last change to the series was before the weekend the removal of an SPI patch which Grant - even though previously acked by himself - appeared to raise objections. So I removed it until the situation is clarified. Other than that all the patches have the acks from their respective maintainers, all MIPS and x86 defconfigs are building fine and I'm not aware of any problems introduced by this series. Among the key features for this patch series is a sizable patchset for Lantiq which among other things introduces support for Lantiq's flagship product, the FALCON SOC. It also means that the opensource developers behind this patchset have overtaken Lantiq's competing inhouse development team that was working behind closed doors. Less noteworthy the ath79 patchset which adds support for a few more chip variants, cleanups and fixes. Finally the usual dose of tweaking of generic code." Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where printk spelling fixes clashed with file move and eventual removal of the printk. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits) MIPS: lantiq: remove orphaned code MIPS: Remove all -Wall and almost all -Werror usage from arch/mips. MIPS: lantiq: implement support for FALCON soc MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc MTD: MIPS: lantiq: implement OF support watchdog: MIPS: lantiq: implement OF support and minor fixes SERIAL: MIPS: lantiq: implement OF support GPIO: MIPS: lantiq: convert gpio-stp-xway to OF GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder MIPS: pci: convert lantiq driver to OF MIPS: lantiq: convert dma to platform driver MIPS: lantiq: implement support for clkdev api MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq() OF: MIPS: lantiq: implement irq_domain support OF: MIPS: lantiq: implement OF support MIPS: lantiq: drop mips_machine support OF: PCI: const usage needed by MIPS MIPS: Cavium: Remove smp_reserve_lock. MIPS: Move cache setup to setup_arch(). ...
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull arm updates from Russell King: "This contains both some fixes found when trying to get the Assabet+neponset setup as a replacement firewall with a 3c589 PCMCIA card, and a bunch of changes from Al to fix up the ARM signal handling, particularly some of the restart behaviour." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: ARM: neponset: make sure neponset_ncr_frob() is exported ARM: fix out[bwl]() arm: don't open-code ptrace_report_syscall() arm: bury unused _TIF_RESTORE_SIGMASK arm: remove unused restart trampoline arm: new way of handling ERESTART_RESTARTBLOCK arm: if we get into work_pending while returning to kernel mode, just go away arm: don't call try_to_freeze() from do_signal() arm: if there's no handler we need to restore sigmask, syscall or no syscall arm: trim _TIF_WORK_MASK, get rid of useless test and branch... arm: missing checks of __get_user()/__put_user() return values
-
Arnaldo Carvalho de Melo authored
The defaults are: [annotate] hide_src_code = false use_offset = true jump_arrows = true show_nr_jumps = false Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-q4egci70rjgxh7bogbbfpcyf@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Linus Torvalds authored
Merge patches through Andrew Morton: "180 patches - err 181 - listed below: - most of MM. I held back the (large) "memcg: add hugetlb extension" series because a bunfight has recently broken out. - leds. After this, Bryan Wu will be handling drivers/leds/ - backlight - lib/ - rtc" * emailed from Andrew Morton <akpm@linux-foundation.org>: (181 patches) drivers/rtc/rtc-s3c.c: fix compiler warning drivers/rtc/rtc-tegra.c: clean up probe/remove routines drivers/rtc/rtc-pl031.c: remove RTC timer interrupt handling drivers/rtc/rtc-lpc32xx.c: add device tree support drivers/rtc/rtc-m41t93.c: don't let get_time() reset M41T93_FLAG_OF rtc: ds1307: add trickle charger support rtc: ds1307: remove superfluous initialization rtc: rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC drivers/rtc/Kconfig: place RTC_DRV_IMXDI and RTC_MXC under "on-CPU RTC drivers" drivers/rtc/rtc-pcf8563.c: add RTC_VL_READ/RTC_VL_CLR ioctl feature rtc: add ioctl to get/clear battery low voltage status drivers/rtc/rtc-ep93xx.c: convert to use module_platform_driver() rtc/spear: add Device Tree probing capability lib/vsprintf.c: "%#o",0 becomes '0' instead of '00' radix-tree: fix preload vector size spinlock_debug: print kallsyms name for lock vsprintf: fix %ps on non symbols when using kallsyms lib/bitmap.c: fix documentation for scnprintf() functions lib/string_helpers.c: make arrays static lib/test-kstrtox.c: mark const init data with __initconst instead of __initdata ...
-
Arnaldo Carvalho de Melo authored
For annotate I want to be able to have variables that are the same as the ones representing feature toggles. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-7rhhf6m0a72p2wja4tgv1itg@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
So that when navigating to another function from a call site or when going to another annotation browser thru the main report/top browser the options (hide source code, jump arrows, jumpy lines, etc) remains the last ones selected. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-0h0tah1zj59p01581snjufne@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 29 May, 2012 20 commits
-
-
Arnaldo Carvalho de Melo authored
When hide_src_view is true we can't use browser_disasm_line->idx, that takes into account also non asm lines, we must use browser_disasm_line->idx_asm instead, otherwise we may end up with an index after the number of entries, oops, fix it. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-o1szpyjh3z87yi0n6x0cr8uu@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Sachin Kamat authored
rtc-s3c.c:673:32: warning: `s3c_rtc_drv_data_array' defined but not used [-Wunused-variable] Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hannu Heikkinen authored
Use the devres managed resource functions in the probe routine. Also affects the remove routine where the previously used free and release functions are not needed. The devm_* functions eliminate the need for manual resource releasing and simplify error handling. Resources allocated by devm_* are freed automatically on driver detach. Signed-off-by:
Hannu Heikkinen <ext-hannu.m.heikkinen@nokia.com> Acked-by:
Stephen Warren <swarren@wwwdotorg.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rajkumar Kasirajan authored
Remove RTT interrupt handling, since PIE mode interrupts are now better emulated in generic code via an hrtimer we have no need for this, and there is no codepath in the driver that enables these periodic interrupts anyway. Signed-off-by:
Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Mattias Wallin <mattias.wallin@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Roland Stigge authored
Adds device tree support for rtc-lpc32xx.c Signed-off-by:
Roland Stigge <stigge@antcom.de> Acked-by:
Rob Herring <rob.herring@calxeda.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Nikolaus Voss authored
If the rtc reports the time might be invalid due to oscillator failure, M41T93_FLAG_OF flag must not be reset by get_time() as the read operation doesn't make the time valid. Without this patch, only the first get_time() reported an invalid time, the second get_time() reported a valid time althought the reported time is probably wrong due to oscillator failure. Instead of resetting in get_time(), with this patch M41T93_FLAG_OF is reset in set_time() when a valid time is to be written. Signed-off-by:
Nikolaus Voss <n.voss@weinmann.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Wolfram Sang authored
Some DS13XX devices have "trickle chargers". Its configuration register is at different locations, the setup is the same, though. Since the configuration is board specific, introduce a platform_data to this driver. Tested with a DS1339 on a custom board. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Wolfram Sang authored
ds1307 was kzalloced, so no need to zero members of the struct. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Acked-by:
Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Fabio Estevam authored
In order to keep consistency with other rtc drivers,rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> [akpm@linux-foundation.org: fix missed arch/arm/configs/imx_v6_v7_defconfig] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Fabio Estevam authored
RTC_DRV_IMXDI and RTC_MXC are on-chip RTC modules, so move them under "on-CPU RTC drivers" selection menu. While at it change the dependency of RTC_DRV_IMXDI from ARCH_MX25 to SOC_IMX25. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Stein authored
Changes are based on arch/cris/arch-v10/drivers/pcf8563.c [akpm@linux-foundation.org: fix sparse warning] Signed-off-by:
Alexander Stein <alexander.stein@systec-electronic.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Mikael Starvik <starvik@axis.com> Acked-by:
Jesper Nilsson <jesper.nilsson@axis.com> Cc: Wu Fengguang <wfg@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Stein authored
Currently there is no generic way to get the RTC battery status within an application. So add an ioctl to read the status bit. The idea is that the bit is set once a low voltage is detected. It stays there until it is reset using the RTC_VL_CLR ioctl. Signed-off-by:
Alexander Stein <alexander.stein@systec-electronic.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
H Hartley Sweeten authored
Use module_platform_driver() to remove the boilerplate code. Also, change the probe and remove functions to __devinit/__devexit. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Viresh Kumar authored
SPEAr platforms now support DT and so must convert all drivers support DT. This patch adds DT probing support for rtc and updates its documentation too. Signed-off-by:
Viresh Kumar <viresh.kumar@st.com> Cc: Stefan Roese <sr@denx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Rob Herring <robherring2@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Pierre Carrier authored
number()'s behaviour is slighly changed: 0 becomes "0" instead of "00" when using the flag SPECIAL and base 8. Before: Number\Format %o %#o %x %#x 0 0 00 0 0x0 1 1 01 1 0x1 16 20 020 10 0x10 After: Number\Format %o %#o %x %#x 0 0 0 0 0x0 1 1 01 1 0x1 16 20 020 10 0x10 Signed-off-by:
Pierre Carrier <pierre@spotify.com> Acked-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Nick Piggin authored
We are not preallocating a sufficient number of nodes. Signed-off-by:
Nick Piggin <npiggin@kernel.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Boyd authored
When a spinlock warning is printed we usually get BUG: spinlock bad magic on CPU#0, modprobe/111 lock: 0xdff09f38, .magic: 00000000, .owner: /0, .owner_cpu: 0 but it's nicer to print the symbol for the lock if we have it so that we can avoid 'grep dff09f38 /proc/kallsyms' to find out which lock it was. Use kallsyms to print the symbol name so we get something a bit easier to read BUG: spinlock bad magic on CPU#0, modprobe/112 lock: test_lock, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 If the lock is not in kallsyms %ps will fall back to printing the address directly. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Boyd authored
Using %ps in a printk format will sometimes fail silently and print the empty string if the address passed in does not match a symbol that kallsyms knows about. But using %pS will fall back to printing the full address if kallsyms can't find the symbol. Make %ps act the same as %pS by falling back to printing the address. While we're here also make %ps print the module that a symbol comes from so that it matches what %pS already does. Take this simple function for example (in a module): static void test_printk(void) { int test; pr_info("with pS: %pS\n", &test); pr_info("with ps: %ps\n", &test); } Before this patch: with pS: 0xdff7df44 with ps: After this patch: with pS: 0xdff7df44 with ps: 0xdff7df44 Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
The code comments for bscnl_emit() and bitmap_scnlistprintf() are describing snprintf() return semantics, but these functions use scnprintf() return semantics. Fix that, and document the bitmap_scnprintf() return value as well. Cc: Ryota Ozaki <ozaki.ryota@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Moving these arrays into static storage shrinks the kernel a bit: text data bss dec hex filename 723 112 64 899 383 lib/string_helpers.o 516 272 64 852 354 lib/string_helpers.o Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-