- 01 Dec, 2010 2 commits
-
-
Pekka Enberg authored
The _USE_FALLBACK_RATE_ macro parametrizes DEFAULT_RATE_RETRY_LIMIT. It's only used in Mxx_initial() in reg.c where _USE_FALLBACK_RATE_ is always defined because the reg.c file includes sysdef.h at the top. It's therefore safe to remove the _USE_FALLBACK_RATE_ macro. Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Pekka Enberg authored
This patch removes all the defines in sysdef.h that are not used at all. Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
- 29 Nov, 2010 38 commits
-
-
Marek Belisko authored
Fix goto error logic which could lead to kernel panics because kthread_stop() is called in not correct error conditions. Seen it sometimes when dsp_reload() fails then I got kernel panic. Signed-off-by:
Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by:
-
Marek Belisko authored
Remove exec_mknod() and rm_mknod() helpers which was used for device nodes creating/removing in kernel space. Signed-off-by:
-
Al Cho authored
fix keucr init.c other coding style but not from checkpatch.pl. replace ternary conditional "?:" with if/else. Signed-off-by:
Al Cho <acho@novell.com> Signed-off-by:
-
Al Cho authored
fix keucr init.c init.h coding style. only fix coding style check by checkpatch.pl. Signed-off-by:
-
Vasiliy Kulikov authored
Driver init() function should return error code. Also fix tvenc_clk leak. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Signed-off-by:
-
Randy Dunlap authored
SND_INTELMID selects 3 SND_* kconfig symbols, but that is useless if the SOUND & SND symbols in their hierarchy are not enabled, so make this symbol depend on SOUND & SND. ERROR: "snd_pcm_period_elapsed" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_card_create" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_pcm_hw_constraint_integer" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_device_new" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_pcm_set_ops" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_jack_new" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_pcm_lib_free_pages" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_pcm_lib_ioctl" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_pcm_lib_malloc_pages" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_ctl_new1" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_pcm_lib_preallocate_pages_for_all" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_card_free" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_card_register" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_jack_report" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_pcm_new" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! ERROR: "snd_ctl_add" [drivers/staging/intel_sst/snd-intelmid.ko] undefined! Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Brett Rudley authored
BUSTYPE isn't used in this configuration. Signed-off-by:
Brett Rudley <brudley@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
The variable dhd_ops_virt was used before although its use was rather limited as can be found in previous commit: | commit 4fd68ae1 | Author: Julia Lawall <julia@diku.dk> | Date: Tue Oct 26 12:25:33 2010 +0200 | | drivers/staging/brcm80211/brcmfmac/dhd_linux.c: delete double assignment | Reviewed-by:
Roland Vossen <rvossen@broadcom.com> Reviewed-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
macros PKTHEADROOM and PKTTAILROOM have been replaced by native skbuff functions and macros PKTALLOCED and PKTUNALLOC have been removed. Reviewed-by:
-
Arend van Spriel authored
With the packet storage type changed from void pointer to struct sk_buff pointer there is no need for macros for accessing these fields through casting. These can now be accessed directly. Reviewed-by:
-
Arend van Spriel authored
The packet queues now store struct sk_buff pointer and subsequently all driver code handling packets now use struct sk_buff as package storage type. Next step will be getting rid of packet macros. Reviewed-by:
-
Arend van Spriel authored
The prototype for function pktsegcnt in bmcutils.h is not defined nor used anywhere in the driver so it can be removed. Reviewed-by:
-
Arend van Spriel authored
Source wl_iw.c uses semaphore definitions and as such should include <linux/semaphore.h>. Signed-off-by:
-
Brett Rudley authored
Replace OSL layer PCI READ/WRITE macros with native calls. Signed-off-by:
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
The Kconfig file should not have 'y' as the default, especially as the driver will crash a machine if it is loaded and the hardware is not present. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mark Allyn <mark.a.allyn@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
The Kconfig file should not have 'y' as the default, especially as the driver will crash a machine if it is loaded and the hardware is not present. Cc: Mark Allyn <mark.a.allyn@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: -
Alan Cox authored
The existing code works mostly by luck. The PCI probe is done by the register and completes before the register returns thus allowing the other init code to run in time. Without a SEP or if unlucky this doesn't occur and you get an OOPS which for some reason causes grumpiness. As the season of good b^Hcheer is supposed to be approaching we should probably fix it. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Cox authored
Another copy_user case and some formatting of dbg Signed-off-by:
-
Alan Cox authored
So use can't instead. Signed-off-by:
-
Alan Cox authored
SEP is initials so make it consistent in the driver, ditto DMA and DCB Consistent capitalisation of comment leads Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Alan Cox authored
Various assignments are done but not used dev_dbg formatting is a bit weird and wraps when not needed Take out some of the blank lines and reformat a bit to reduce view size Remove some comments that are obvious Fix else formatting Remove some user triggerable dev_warns Fix copy_from_user error return cases (-EFAULT not bytes copied) Signed-off-by:
-
Alan Cox authored
The long blurb goes at the end Signed-off-by:
-
Alan Cox authored
This is called on a kmalloc/memset object. Remove everything that isn't a set to zero Oh look 8) Signed-off-by:
-
Alan Cox authored
Kill unused stuff Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Alan Cox authored
SEP isn't the only driver that may need to handle both cases easily Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Vinod Koul authored
This patch adds two new ioctls to intel_sst_ctrl device. This i/f can be used by application to send algorithm parameters Signed-off-by:
Vinod Koul <vinod.koul@intel.com> [This will need further discussion in the context of the final ALSA interface but is fine for staging, ie anyone who relies on it should expect changes Also fixed a missing kmalloc fail check] Signed-off-by:
-
Vinod Koul authored
The firmware name for each platform is appended by PCI id of device. This patch makes use of pci id to construct the string rather than hardcode the string. Signed-off-by:
-
Vinod Koul authored
This adds runtime PM support for audio driver. This also fixes LPA audio mode for moorestown platform Signed-off-by:
-
Sven Eckelmann authored
linux/etherdevice.h already provides functions to classify different ethernet addresses. These inlineable functions should be used instead of custom functions. The check for multicast together with multicast can also be replaced with a single test for multicast because for every ethernet address x following is always true: is_broadcast_ether_addr(x) => is_multicast_ether_addr(x) or when looking more at the implementation: (FF:FF:FF:FF:FF:FF == x) => [(01:00:00:00:00:00 & x) != 00:00:00:00:00:00] Reported-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by:
-
Sven Eckelmann authored
The kernel headers already provide different versions of a min/max macro which should be used by all modules according to Documentation/CodingStyle. Signed-off-by:
-
Marek Lindner authored
Some additional checks will be needed in case of extension headers like the fragmentation or hop-by-hop (for jumbo frames for example) headers or ipsec stuff. But this patch should do for most people for now, the rest can be added with a later one. Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Acked-by:
Linus Lüssing <linus.luessing@web.de> Signed-off-by:
-
Marek Lindner authored
The DHCP filter inspects packets to determine whether or not to send them via ethernet unicast. This patch adds 802.1Q (vlan) support for this check. Signed-off-by:
-
Marek Lindner authored
If the gateway client mode is active batman-adv will send the broadcasted DHCP requests via unicast to the currently selected best gateway. Therefore attached clients can profit from batman's knowledge about the network topology. Signed-off-by:
-
Marek Lindner authored
Via the /sys filesystem you can change the gateway mode of a node using gw_mode. Adjustments to it can be done using gw_bandwidth for server mode and gw_sel_class for client mode. Signed-off-by:
-
