- 13 Jan, 2015 3 commits
-
-
Rajkumar Manoharan authored
Add WMI support for sending addba response manually. This command is used for debugging purpose. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Rajkumar Manoharan authored
Add WMI support for sending addba request. This command is meant for debugging purpose. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Rajkumar Manoharan authored
Add WMI support for clearing addba response before switching aggregation mode (auto/manual) for debugging purpose. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
- 12 Jan, 2015 2 commits
-
-
Sujith Manoharan authored
This feature allows the FW to batch RX indications, reducing the rate of host interrupt generation, which in turn reduces CPU load. Currently, this is enabled only for the 10.2 firmware. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Sujith Manoharan authored
A value of zero indicates that 128B is the maximum DMA request size for read/writes. But PCI cards based on AR9880 can support 256B, so enable this for the 10.2 firmware. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
- 09 Jan, 2015 27 commits
-
-
Kalle Valo authored
Major changes in ath10k: * Device tree support * Major restructuring how to handle different WMI interface versions * Add WMI TLV interface in preparation for new firmware interface support * Support new firmware branch 10.2.4 * Add thermal cooling interface * Add hwmon interface to read temparture from the device And of course lots of small fixes and cleanups.
-
Kalle Valo authored
kbuild reported a linking error: ERROR: "devm_hwmon_device_register_with_groups" [drivers/net/wireless/ath/ath10k/ath10k_core.ko] undefined! Fix it by returning early and letting the compiler to optimise out the function call. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Larry Finger authored
Several of the drivers still were defining their own copies of various macros. These are all moved into the core. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Larry Finger authored
Convert driver to use routine rtl_dm_diginit(). Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Larry Finger authored
Convert driver rtl8723be to use routine rtl_dm_diginit(). Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Larry Finger authored
Convert driver rtl8723ae to use common routine rtl_dm_diginit(). Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Larry Finger authored
Convert driver rtl8192ee to use the common routine to initialize dm_digtable. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Larry Finger authored
This patch converts driver rtl8192de to use the common routine to initialize dm_digtable. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Larry Finger authored
These changes convert both rtl8192ce and rtl8192cu to use the new routine. Some additional definitions are needed in the core, thus several of the headers for other drivers are affected, but no other executable code is changed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Larry Finger authored
The previous patch created a routine in rtlwifi to initialize dm_digtable. Driver rtl8188ee is converted to use that routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Larry Finger authored
Each of the drivers contains a routine that initializes the dm_digtable member of the driver's private area. As a first step toward reducing the size of the drivers, a copy of this driver is created in rtlwifi, and the definitions of the parameters are moved there. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Larry Finger authored
The description of the power-save variables for this driver is not as clear as for the others. The wording is changed to match the others. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Larry Finger authored
Some drivers refer to a particular quantity in the driver's private are by one name, while others use a different name. These differences are removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Arend van Spriel authored
Instead of defining SDIO device identifier in brcm80211 code use the defintions in linux/mmc/sdio_ids.h directly. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Eliad Peller authored
After having all the dfs infrastructure in place, declare radar_detect_widths support for the ap interfaces combination. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Guy Mishol authored
Add dfs region to the reg domain channel update command. Signed-off-by: Guy Mishol <guym@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Eliad Peller authored
Since we are going to support dfs channels, there is no reason to mark them as NO_IR (having the DFS flag is enough anyway). Additionally, when setting the regdomain configuration, enable usable dfs channels. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Eliad Peller authored
call wlcore_cmd_dfs_master_restart when starting the ap on a new channel (after csa is done). Add a new WLVIF_FLAG_BEACON_DISABLED flag to indicate that dfs_master_restart command is required. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Eliad Peller authored
Support ap csa support by implementing the channel_switch_beacon() mac80211 op. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Eliad Peller authored
Add debugfs file to emulate radar detection through a special fw cmd (which in turn will generate radar event) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Eliad Peller authored
Add support for CAC start/stop commands, and pass radar detection events from the fw to mac80211. Bump fw name (to wl18xx-fw-4.bin) and min fw version (to 8.9.*.*.11), and align event mailbox accordingly. Signed-off-by: Guy Mishol <guym@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kobi L authored
Enable ELP authorization in AP mode and enable the use of the wakeup bit in the ELP register. Introduce AP role sleep configuration which is disabled by default. When configured, it allows the AP to sleep when ELP is authorized for it. Signed-off-by: Kobi Leibovitch <kobi.lev100@gmail.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Eliad Peller authored
configure wowlan when host is suspended in AP mode, since the FW can now wake the host up on Rx. Signed-off-by: Kobi Leibovitch <kobi.lev100@gmail.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Ram Amrani authored
Add the ability to mask FW interrupts on RX BA activity, PSM entry/exit and fast-link notifications. This is used when the host is suspended in order to decrease redundant wake ups. Signed-off-by: Ram Amrani <ramrani@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Eliad Peller authored
sta_rc_update runs in atomic context. thus, a new work should be scheduled in order to configure the fw with the required configuration. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Eliad Peller authored
Use kstrtoul_from_user() for reading the user value, and fix the following sparse warning: drivers/net/wireless/ti/wlcore/debugfs.c:937:15: error: incompatible types in comparison expression (different type sizes) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Eliad Peller authored
The attribute type is binary data (with max length). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
- 07 Jan, 2015 8 commits
-
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-