Skip to content

L
linux
Switch branch/tag
  1. 24 Apr, 2009 26 commits
  3. 22 Apr, 2009 7 commits
    • Len Brown's avatar
      ACPI: delete obsolete "bus master activity" proc field · 92614610
      Len Brown authored 
      Linux-2.6.29 deleted the legacy ACPI idle handler, leaving
the CPU_IDLE handler, which does not track bus master activity.

So delete the unused bm_activity field -- it is confusing to
print an always zero value.

This patch could break programs that parse
/proc/acpi/processor/*/power, since it deletes this
line from that file:

bus master activity:     00000000

http://bugzilla.kernel.org/show_bug.cgi?id=13145
is not fixed by this patch, but provoked this patch.
Signed-off-by: default avatarLen Brown <len.brown@intel.com>
      92614610
    • Len Brown's avatar
      ACPI: idle: mark_tsc_unstable() at init-time, not run-time · a71e4917
      Len Brown authored 
      The c2 and c3 idle handlers check tsc_halts_in_c()
after every time they return from idle.  Um, when?:-)

Move this check to init-time to remove the unnecessary
run-time overhead, and also to have the check complete before
the first entry into the idle handler.

ff69f2bb
(acpi: fix of pmtimer overflow that make Cx states time incorrect)
replaced the hard-coded use of the PM-timer inside idle,
with ktime_get_readl(), which possibly uses the TSC --
so it is now especially prudent to detect a broken TSC
before entering idle.

http://bugzilla.kernel.org/show_bug.cgi?id=13087Signed-off-by: default avatarLen Brown <len.brown@intel.com>
      a71e4917
    • Linus Torvalds's avatar
      Linux 2.6.30-rc3 · 09106974
      Linus Torvalds authored
      09106974
    • Arjan van de Ven's avatar
      driver synchronization: make scsi_wait_scan more advanced · d4d5291c
      Arjan van de Ven authored 
      There is currently only one way for userspace to say "wait for my storage
device to get ready for the modules I just loaded": to load the
scsi_wait_scan module. Expectations of userspace are that once this
module is loaded, all the (storage) devices for which the drivers
were loaded before the module load are present.

Now, there are some issues with the implementation, and the async
stuff got caught in the middle of this: The existing code only
waits for the scsy async probing to finish, but it did not take
into account at all that probing might not have begun yet.
(Russell ran into this problem on his computer and the fix works for him)

This patch fixes this more thoroughly than the previous "fix", which
had some bad side effects (namely, for kernel code that wanted to wait for
the scsi scan it would also do an async sync, which would deadlock if you did
it from async context already.. there's a report about that on lkml):
The patch makes the module first wait for all device driver probes, and then it
will wait for the scsi parallel scan to finish.
Signed-off-by: default avatarArjan van de Ven <arjan@linux.intel.com>
Tested-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d4d5291c
    • Jonathan Corbet's avatar
      Trivial: fix a typo in slow-work.h · 5dd559f0
      Jonathan Corbet authored 
      Fix a comment typo in slow-work.h

...a trivial mistake, but it will mess up kerneldoc if nothing else.
Signed-off-by: default avatarJonathan Corbet <corbet@lwn.net>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5dd559f0
    • David Howells's avatar
      PERCPU: Collect the DECLARE/DEFINE declarations together · 5028eaa9
      David Howells authored 
      Collect the DECLARE/DEFINE declarations together in linux/percpu-defs.h so
that they're in one place, and give them descriptive comments, particularly
the SHARED_ALIGNED variant.

It would be nice to collect these in linux/percpu.h, but that's not possible
without sorting out the severe #include recursion between the x86 arch headers
and the general headers (and possibly other arches too).
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5028eaa9
    • David Howells's avatar
      FRV: Fix the section attribute on UP DECLARE_PER_CPU() · 9b8de747
      David Howells authored 
      In non-SMP mode, the variable section attribute specified by DECLARE_PER_CPU()
does not agree with that specified by DEFINE_PER_CPU().  This means that
architectures that have a small data section references relative to a base
register may throw up linkage errors due to too great a displacement between
where the base register points and the per-CPU variable.

On FRV, the .h declaration says that the variable is in the .sdata section, but
the .c definition says it's actually in the .data section.  The linker throws
up the following errors:

kernel/built-in.o: In function `release_task':
kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o
kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o

To fix this, DECLARE_PER_CPU() should simply apply the same section attribute
as does DEFINE_PER_CPU().  However, this is made slightly more complex by
virtue of the fact that there are several variants on DEFINE, so these need to
be matched by variants on DECLARE.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9b8de747
  5. 21 Apr, 2009 7 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7