This argument is not used, let's remove it.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This argument is not used, let's remove it.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bond_compute_features is always called with RTNL held, so we can safely
drop the read bond->lock.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We're protected by RTNL so nothing can happen and we can safely drop the
read bond->lock.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can drop the use of bond->lock for mutual exclusion in
bond_3ad_update_lacp_rate and use RTNL in the sysfs store function
instead. This way we'll prevent races with mode change and interface
up/down as well as simplify update_lacp_rate by removing the check for
port->slave because it'll always be initialized (done while enslaving
with RTNL). This change will also help in the future removal of reader
bond->lock from bond_enslave.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We don't have to release all slaves when closing the bond dev, so remove
the outdated comment and the braces around the left single statement.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch aims to remove a use of the bond->lock for mutual exclusion
which will later allow easier migration to RCU of the users of this
functionality. We use RTNL as a synchronizing mechanism since it's
always held when send_peer_notif is set, and when it is decremented from
the notifier function. We can also drop some locking, and fix the
leakage of the send_peer_notif counter.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As Michael point out, We used to limit the max pending DMAs to get better cache
utilization. But it was not done correctly since it was one done when there's no
new buffers submitted from guest. Guest can easily exceeds the limitation by
keeping sending packets.

So this patch moves the check into main loop. Tests shows about 5%-10%
improvement on per cpu throughput for guest tx.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We used to poll vhost queue before making DMA is done, this is racy if vhost
thread were waked up before marking DMA is done which can result the signal to
be missed. Fix this by always polling the vhost thread before DMA is done.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, even if the packet length is smaller than VHOST_GOODCOPY_LEN, if
upend_idx != done_idx we still set zcopy_used to true and rollback this choice
later. This could be avoided by determining zerocopy once by checking all
conditions at one time before.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Let vhost_add_used() to use vhost_add_used_n() to reduce the code
duplication. To avoid the overhead brought by __copy_to_user(). We will use
put_user() when one used need to be added.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We tend to batch the used adding and signaling in vhost_zerocopy_callback()
which may result more than 100 used buffers to be updated in
vhost_zerocopy_signal_used() in some cases. So switch to use
vhost_add_used_and_signal_n() to avoid multiple calls to
vhost_add_used_and_signal(). Which means much less times of used index
updating and memory barriers.

2% performance improvement were seen on netperf TCP_RR test.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

None of its caller use its return value, so let it return void.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the wrapper functions for getting and setting the driver data
using pci_dev instead of using dev_{get,set}_drvdata() with
&pdev->dev, so we can directly pass a struct pci_dev. This is
a purely cosmetic change.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the wrapper functions for getting and setting the driver data
using pci_dev instead of using dev_{get,set}_drvdata() with
&pdev->dev, so we can directly pass a struct pci_dev. This is
a purely cosmetic change.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the wrapper functions for getting and setting the driver data
using platform_device instead of using dev_{get,set}_drvdata()
with &pdev->dev, so we can directly pass a struct platform_device.
This is a purely cosmetic change.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the wrapper functions for getting and setting the driver data
using platform_device instead of using dev_{get,set}_drvdata()
with &pdev->dev, so we can directly pass a struct platform_device.
This is a purely cosmetic change.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the wrapper functions for getting and setting the driver data
using platform_device instead of using dev_{get,set}_drvdata()
with &pdev->dev, so we can directly pass a struct platform_device.
This is a purely cosmetic change.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function is being removed, so remove the reference to it.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function is being removed, rename the reference.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert the llc_<foo> static inlines to the
equivalents from etherdevice.h and remove
the llc_<foo> static inline functions.

llc_mac_null -> is_zero_ether_addr
llc_mac_multicast -> is_multicast_ether_addr
llc_mac_match -> ether_addr_equal
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.

Done via cocci script: (and a little typing)

$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
-	!compare_ether_addr(a, b)
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	compare_ether_addr(a, b)
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) == 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) != 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) == 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) != 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!!ether_addr_equal(a, b)
+	ether_addr_equal(a, b)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Liu Junliang <liujunliang_ljl@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SkyHawk-R can support VEB or VEPA mode.
This patch will allow the user to set/query this switch setting.
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The name of the function in the comment is __skb_alloc_page() while we
are actually commenting __skb_alloc_pages(). Fix this typo and make it
a valid kernel doc comment.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the amount of sent bytes reported to BQL by reporting the
number of bytes on wire in the xmit routine, and recording that
value for each skb in order to be correctly confirmed on Tx
confirmation cleanup.

Reporting skb->len to BQL just before exiting xmit is not correct
due to possible insertions of TOE block and alignment bytes in the
skb->data, which are being stripped off by the controller before
transmission on wire.  This led to mismatch of (incorrectly)
reported bytes to BQL b/w xmit and Tx confirmation, resulting in
Tx timeout firing, for the h/w tx timestamping acceleration case.

There's no easy way to obtain the number of bytes on wire in the Tx
confirmation routine, so skb->cb is used to convey that information
from xmit to Tx confirmation, for now (as proposed by Eric). Revived
the currently unused GFAR_CB() construct for that purpose.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When my 'ifup eth' script was fired multiple times and ran concurrent on
my laptop, for some obscure /etc scripting reason, it was revealed
that the store_enabled() function in netconsole doesn't handle it nicely,
as recorded by the Oops below (a syslog paste, but not mangled too much
to prevent from discerning the traceback).

On Linux 3.10.4, this patch seeks to remedy the problem, and it has been
running stable on my laptop for a few days.

[52608.609325] BUG: unable to handle kernel NULL pointer dereference at 00000000000003e0
[52608.609331] IP: [<ffffffff81532a17>] __netpoll_cleanup+0x27/0xe0
[52608.609339] PGD 15e51a067 PUD 15433e067 PMD 0
[52608.609343] Oops: 0000 [#1] SMP re firewire_ohci firewire_core crc_itu_t [last unloaded: kvm_intel]
[52608.609347] Modules linked in: kvm_intel tun vfat fat ppdev parport_pc parport fuse ipt_MASQUERADE usb_storage nf_conntrack_netbios_ns nf_conn [..garbled..]
[52608.609433] RAX: 0000000000000000 RBX: ffff880210bbcc68 RCX: 0000000000000000
[52608.609435] RDX: 0000000000000000 RSI: ffff8801ba447da0 RDI: ffff880210bbcc68
[52608.609437] RBP: ffff8801ba447e18 R08: 0000000000000000 R09: 0000000000000001
[52608.609439] R10: 000000000000000a R11: f000000000000000 R12: ffff880210bbcc68
[52608.609441] R13: ffff88020bc41000 R14: 0000000000000002 R15: 000000000000000200000000000
[52608.609443] FS:  00007f38d7bff740(0000) GS:ffff88021dc40000(0000) knlGS:0000000000000000
[52608.609446] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003300000000001427e0
[52608.609448] CR2: 00000000000003e0 CR3: 0000000154103000 CR4: 00000000001427e0
[52608.609450] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[52608.609452] netpoll: netconsole: local port 6665ess 10.0.0.27
[52608.609454] netpoll: netconsole: local IPv4 address 10.0.0.27
[52608.609456] netpoll: netconsole: interface 'em1'
[52608.609457] netpoll: netconsole: remote port 514ress 10.0.0.15
[52608.609459] netpoll: netconsole: remote IPv4 address 10.0.0.15:65:a8:9a:c7
[52608.609461] netpoll: netconsole: remote ethernet address 1c:6f:65:a8:9a:c7
[52608.609463] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[52608.609464] Stack:801ba447e08 ffff880210bbcc68 ffffffffffffffea ffff88020bc41000
[52608.609466]  ffff8801ba447e08 ffff880210bbcc68 ffffffffffffffea ffff88020bc41000
[52608.609471]  0000000000000002 0000000000000002 ffff8801ba447e38 ffffffff81532af4
[52608.609475]  0000000000000000 ffff880210bbcc00 ffff8801ba447e78 ffffffff81420e7c
[52608.609479] Call Trace:
[52608.609484]  [<ffffffff81532af4>] netpoll_cleanup+0x24/0x50
[52608.609489]  [<ffffffff81420e7c>] store_enabled+0x5c/0xe0
[52608.609492]  [<ffffffff81420abe>] netconsole_target_attr_store+0x2e/0x40
[52608.609498]  [<ffffffff811ff2a2>] configfs_write_file+0xd2/0x130
[52608.609503]  [<ffffffff81188f95>] vfs_write+0xc5/0x1f0
[52608.609506]  [<ffffffff81189482>] SyS_write+0x52/0xa0/0x10
[52608.609511]  [<ffffffff81628c2e>] ? do_page_fault+0xe/0x10
[52608.609516]  [<ffffffff8162d402>] system_call_fastpath+0x16/0x1b
[52608.609517] Code: 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 30 4c 89 65 e0 48 89 5d d8 49 89 fc 4c 89 6d e8 4c 89 75 f0 4c 89 7d f8 48 8 [..garbled..]
[52608.609559] RIP  [<ffffffff81532a17>] __netpoll_cleanup+0x27/0xe0
[52608.609563]  RSP <ffff8801ba447de8>
[52608.609564] CR2: 00000000000003e0
[52608.609567] ---[ end trace d25ec343349b61d2 ]---
Signed-off-by: Dan Aloni <alonid@postram.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This corrects an oversight when r8a7790 support was added to sh_eth.
Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Store VID in ->vlan_id (if any), and remove the useless ->tag.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We're using it currently to verify if we have vlans before getting the tag
from the skb we're about to send. It's useless because the vlan_get_tag()
verifies if the skb has the tag (and returns an error if not), and we can
receive tagged skbs only if we *already* have vlans.

Plus, the current RCUed implementation is kind of useless anyway - the we
can remove the last vlan in the moment we return from the function.

So remove the only usage of it and the whole function.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Marc Kleine-Budde says:

====================
this is a pull request for net-next. There are two patches from Gerhard
Sittig, which improves the clock handling on mpc5121. Oliver Hartkopp
provides a patch that adds a per rule limitation of frame hops.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

John W. Linville says:

====================
Please accept this batch of updates intended for the 3.12 stream.

For the mac80211 bits, Johannes says this:

"This time I have various improvements all over the place: IBSS, mesh,
testmode, AP client powersave handling, one of the rare rfkill patches
and some code cleanup."

Also for mac80211:

"And I also have some more changes for -next, just a few small fixes and
improvements, nothing really stands out."

And for iwlwifi:

"This time I have some powersave work (notably uAPSD support), CQM
offloads, support for a new firmware API and various code cleanups."

Regarding the Bluetooth bits, Gustavo says:

"Patches to 3.12, here we have:

* implementation of a proper tty_port for RFCOMM devices, this fixes some
issues people were seeing lately in the kernel.
* Add voice_setting option for SCO, it is used for SCO Codec selection
* bugfixes, small improvements and clean ups"

For the NFC bits, Samuel says:

"With this one we have:

- A few pn533 improvements and minor fixes. Testing our pn533 driver
  against Google's NCI stack triggered a few issues that we fixed now.
  We also added Tx fragmentation support to this driver.

- More NFC secure element handling. We added a GET_SE netlink command
  for getting all the discovered secure elements, and we defined 2
  additional secure element netlink event (transaction and connectivity).
  We also fixed a couple of typos and copy-paste bugs from the secure
  element handling code.

- Firmware download support for the pn544 driver. This chipset can enter a
  special mode where it's waiting for firmware blobs to replace the
  already flashed one. We now support that mode."

With repect to the ath tree, Kalle says:

"New features in ath10k are rx/tx checsumming in hw and survey scan
implemented by Michal. Also he made fixes to different areas of the
driver, most notable being fixing the case when using two streams and
reducing the number of interface combinations to avoid firmware crashes.
Bartosz did a clean related to how we handle SoC power save in PCI
layer.

For ath6kl Mohammed and Vasanth sent each a patch to fix two infrequent
crashes."

I also pulled the wireless tree into wireless-next to support a
request from Johannes.  On top of all that, there are the usual
sort of driver updates.  The mwifiex, brcmfmac, brcmsmac, ath9k,
and rt2x00 drivers all get some attention, as does the bcma bus and
a few other random bits here and there.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a follow-up commit for commit b1dcdc68 ("net: tcp_probe:
allow more advanced ingress filtering by mark") that allows for
advanced SCTP probe module filtering based on skb mark (for a more
detailed description and advantages using mark, refer to b1dcdc68).
The current option to filter by a given port is still being preserved.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This config option is superfluous in that it only guards a call
to neigh_app_ns(). Enabling CONFIG_ARPD by default has no
change in behavior. There will now be call to __neigh_notify()
for each ARP resolution, which has no impact unless there is a
user space daemon waiting to receive the notification, i.e.,
the case for which CONFIG_ARPD was designed anyways.
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Gao feng <gaofeng@cn.fujitsu.com>
Cc: Joe Perches <joe@perches.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the VIRTIO_NET_F_GUEST_CSUM virtio feature is available, the guest
does not have to calculate the checksums on all received packets. This
is pretty much the same feature as RX checksum offloading on real
network cards, so the virtio-net driver should report this by setting
the NETIF_F_RXCSUM flag. When the user now runs "ethtool -k", he or she
can see whether the virtio-net interface has to calculate RX checksums
or not.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bjørn Mork says:

====================
net: set addr_assign_type when inheriting a dev_addr

Copying the dev_addr from a parent device is an operation
common to a number of drivers. The addr_assign_type should
be updated accordingly, either by reusing the value from
the source device or explicitly indicating that the address
is stolen by setting addr_assign_type to NET_ADDR_STOLEN.

This patch set adds a helper copying both the dev_addr and
the addr_assign_type, and use this helper in drivers which
don't currently set the addr_assign_type. Using NET_ADDR_STOLEN
might be more appropriate in some of these cases.  Please
let me know, and I'll update the patch accordingly.

Changes in v2:
 - assuming addr_len == ETH_ALEN to allow optimized memcpy
 - dropped the vt6656 patch due to addr_len being unset in that driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

A device inheriting a random or set address should reflect this in
its addr_assign_type.

Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

A device inheriting a random or set address should reflect this in
its addr_assign_type.
Acked-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

A device inheriting a random or set address should reflect this in
its addr_assign_type.

Cc: Jouni Malinen <j@w1.fi>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>