- 28 May, 2020 1 commit
-
-
Sven Schnelle authored
This will be used with the upcoming entry.S changes to signal that there's a machine check pending that cannot be handled in the Machine check handler itself. Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com>
-
- 20 May, 2020 11 commits
-
-
Niklas Schnelle authored
Let's use the same signature and parameter names as in the generic ioremap() definition making the physical address' type explicit. Add a check against address wrap around as in the generic lib/ioremap.c:ioremap_prot() code. Finally use free_vm_area() instead of vunmap() as in the generic code. Besides being clearer free_vm_area() can also skip a few additional checks compared with vunmap(). Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
-
Harald Freudenberger authored
Provide a new interface function to be used by the ap drivers: struct ap_queue *ap_get_qdev(ap_qid_t qid); Returns ptr to the struct ap_queue device or NULL if there was no ap_queue device with this qid found. When something is found, the reference count of the embedded device is increased. So the caller has to decrease the reference count after use with a call to put_device(&aq->ap_dev.device). With this patch also the ap_card_list is removed from the ap core code and a new hashtable is introduced which stores hnodes of all the ap queues known to the ap bus. The hashtable approach and a first implementation of this interface comes from a previous patch from Anthony Krowiak and an idea from Halil Pasic. Signed-off-by:
Harald Freudenberger <freude@linux.ibm.com> Suggested-by:
Tony Krowiak <akrowiak@linux.ibm.com> Suggested-by:
Halil Pasic <pasic@linux.ibm.com> Reviewed-by:
-
Gerald Schaefer authored
s390 documentation now lives in IBM Knowledge Center, so update the link in the zfcpdump documentation. Also, remove the old developerWorks links from the appldata source code. Those were not really documentation related, but rather a reminder to the developer that some documentation has to be adjusted when changing the record layout, which should still be pretty obvious from the remaining comment. Signed-off-by:
-
David Hildenbrand authored
Assume we have a crashkernel area of 256MB reserved: root@vm0:~# cat /proc/iomem 00000000-6fffffff : System RAM 0f258000-0fcfffff : Kernel code 0fd00000-101d10e3 : Kernel data 105b3000-1068dfff : Kernel bss 70000000-7fffffff : Crash kernel This exactly corresponds to memory block 7 (memory block size is 256MB). Trying to offline that memory block results in: root@vm0:~# echo "offline" > /sys/devices/system/memory/memory7/state -bash: echo: write error: Device or resource busy [ 128.458762] page:000003d081c00000 refcount:1 mapcount:0 mapping:00000000d01cecd4 index:0x0 [ 128.458773] flags: 0x1ffff00000001000(reserved) [ 128.458781] raw: 1ffff00000001000 000003d081c00008 000003d081c00008 0000000000000000 [ 128.458781] raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000 [ 128.458783] page dumped because: unmovable page The craskernel area is marked reserved in the bootmem allocator. This results in the memmap getting initialized (refcount=1, PG_reserved), but the pages are never freed to the page allocator. So these pages look like allocated pages that are unmovable (esp. PG_reserved), and therefore, memory offlining fails early, when trying to isolate the page range. We only have to care about the exchange area, make that clear. Signed-off-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
-
Niklas Schnelle authored
On s390 PCI Virtual Functions (VFs) are scanned by firmware and are made available to Linux via the hot-plug interface. As such the common code path of doing the scan directly using the parent Physical Function (PF) is not used and fenced off with the no_vf_scan attribute. Even if the partition created the VFs itself e.g. using the sriov_numvfs attribute of a PF, the PF/VF links thus need to be established after the fact. To do this when a VF is plugged we scan through all functions on the same zbus and test whether they are the parent PF in which case we establish the necessary links. With these links established there is now no more need to fence off pci_iov_remove_virtfn() for pdev->no_vf_scan as the common code now works fine. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Pierre Morel <pmorel@linux.ibm.com> Link: https://lore.kernel.org/r/20200506154139.90609-3-schnelle@linux.ibm.comSigned-off-by:
-
Niklas Schnelle authored
Currently pci_iov_add_virtfn() scans the SR-IOV BARs, adds the VF to the bus and also creates the sysfs links between the newly added VF and its parent PF. With pdev->no_vf_scan fencing off the entire pci_iov_add_virtfn() call s390 as the sole pdev->no_vf_scan user thus ends up missing these sysfs links which are required for example by QEMU/libvirt. Instead of duplicating the code refactor pci_iov_add_virtfn() to make sysfs link creation callable separately. Signed-off-by:
-
Julian Wiedmann authored
SBALs in PRIMED or ERROR state represent new work on the Input Queue. But while inbound_primed() does all sorts of ACK management for new PRIMED work, the same handling is currently missing for ERROR work. In particular the path for ERROR work doesn't clear up _old_ ACKs. Treat ERROR work the same as PRIMED work, but consider that the QEBSM auto-ACK feature doesn't apply here. So we need to set the ACK manually, as if it was a non-QEBSM device. Note that this doesn't aspire to actually improve performance, the main goal is to just unify the code paths and have consistent behaviour. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
inbound_primed() currently has two code paths - one for QEBSM that knows how to deal with multiple ACKs, and a non-QEBSM path that strictly assumes a single ACK on the queue. In preparation for a subsequent patch, slightly adjust the non-QEBSM path so that it can manage a queue with multiple ACKs. Signed-off-by:
-
Julian Wiedmann authored
Refilling the Input Queue requires additional checks, as the refilled SBALs can overlap with the ACKs that qdio maintains on the queue. This code path is way too complex, and does a whole bunch of wrap-around checks that the modulo arithmetic in sub_buf() takes care of by itself. So shrink down all that code into a few lines of equivalent functionality. Signed-off-by:
-
YueHaibing authored
commit 8ebd51a7 ("s390/cio: idset.c: remove some unused functions") left behind this, remove it Link: https://lkml.kernel.org/r/20200508140643.30540-1-yuehaibing@huawei.comSigned-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Vineeth Vijayan <vneethv@linux.ibm.com> [vneethv@linux.ibm.com: Slight modification in the title] Signed-off-by:
-
YueHaibing authored
commit 657480d9 ("s390: support KPROBES_ON_FTRACE") left behind this, remove it. Signed-off-by:
-
- 06 May, 2020 5 commits
-
-
Jason J. Herne authored
Populate sysfs and structs with reipl entries for nvme ipl type. This allows specifying a target nvme device when rebooting/reipling. Signed-off-by:
Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by:
-
Jason J. Herne authored
Recognize IPL Block's Ipl Type of "nvme". Populate related structs and sysfs entries. Signed-off-by:
-
Pierre Morel authored
Clarify the documentation. Signed-off-by:
-
Pierre Morel authored
The assignment of the PCI device multifunction attribute is set during the PCI device probe. There is no need to set it here. Let's do it right and remove this assignment. Signed-off-by:
-
Masahiro Yamada authored
s390 uses the UTS_MACHINE defined arch/s390/Makefile as follows: UTS_MACHINE := s390x We do not need to pass the fixed string from the command line. Hard-code user_regset_view::name, like many other architectures do. Link: https://lkml.kernel.org/r/20200413013113.8529-1-masahiroy@kernel.orgSigned-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
- 28 Apr, 2020 19 commits
-
-
Julian Wiedmann authored
buf_in_between() gets passed q->u.in.ack_start as 'bufnr' parameter. The ack_start always ranges between 0 and QDIO_MAX_BUFFERS_PER_Q - 1, so the subsequent check will always return true. Remove it. Signed-off-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Except for some initial thinint-only steps, the processing is identical to the non-thinint case. So re-use the existing helper. Signed-off-by:
-
Julian Wiedmann authored
Knowing how many queues we initially allocated allows us to 1) sanity-check a subsequent qdio_establish() request, and 2) walk the queue arrays without further checks. Apply this while cleanly splitting qdio_free_queues() into two separate helpers. Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Reviewed-by:
-
Julian Wiedmann authored
When qdio_allocate_qs() fails, have it deal with its previous allocations. This way qdio_allocate() doesn't need to clean up afterwards. Signed-off-by:
-
Julian Wiedmann authored
Instead of having a catch-all qdio_release_memory() helper, free the individual allocations from the respective error path. Signed-off-by:
-
Julian Wiedmann authored
Wrap the init/exit steps for thinint into a single helper that follows the established naming scheme. Signed-off-by:
-
Julian Wiedmann authored
qdio_establish() calls qdio_setup_thinint() via qdio_setup_irq(). If the subsequent qdio_establish_thinint() fails, we miss to put the DSCI again. Thus the DSCI isn't available for re-use. Given enough of such errors, we could end up with having only the shared DSCI available. Merge qdio_setup_thinint() into qdio_establish_thinint(), and deal with such an error internally. Fixes: 779e6e1c ("[S390] qdio: new qdio driver.") Signed-off-by:
-
Julian Wiedmann authored
qdio_establish() calls qdio_establish_thinint(), but later has an error exit path that doesn't roll this call back. Fix it. Fixes: 779e6e1c ("[S390] qdio: new qdio driver.") Signed-off-by:
-
Julian Wiedmann authored
For rolling back after an error, qdio_establish() calls qdio_shutdown(). If the error occurs early enough, then the qdio_irq's state still is QDIO_IRQ_STATE_INACTIVE and qdio_shutdown() does nothing. But at _any_ point where qdio_establish() bails out in this way, qdio_setup_irq() will have already replaced the IRQ handler. This then won't be restored after an early error, and the device can end up being returned to the device driver with qdio's IRQ handler still installed. Slightly reorder qdio_setup_irq() so we can be 100% sure that the IRQ handler was replaced. Then fix the bug in qdio_establish() by calling a helper that rolls back only the IRQ handler modification. Also use the new helper in qdio_shutdown() to keep things in sync, and slightly clean up the locking while doing so. This makes minor semantical changes, but holding setup_mutex gives us sufficient leeway to eg. pull qdio_shutdown_thinint() outside of the ccwdev lock's scope. Fixes: 779e6e1c ("[S390] qdio: new qdio driver.") Signed-off-by:
-
Pierre Morel authored
There are changes in the usage of PCI for the user: - new kernel parameter - modification of the way functions are enumerated Let's document these. Signed-off-by:
-
Pierre Morel authored
The Physical function should not be disabled until no virtual functions depends on it. Let's force the user to first use echo 0 > sriov_numfs before allowing to disable the PF with echo 0 > power. Signed-off-by:
-
Pierre Morel authored
We allow multiple functions on a single bus. We suppress the ZPCI_DEVFN definition and replace its occurences with zpci->devfn. We verify the number of device during the registration. There can never be more domains in use than existing devices, so we do not need to verify the count of domain after having verified the count of devices. Signed-off-by:
-
Pierre Morel authored
The current PCI implementation do not provide a bus resource. This leads to a notice being print at boot. Let's do it more nicely and provide the bus resource. Signed-off-by:
-
Pierre Morel authored
Simplify the event handling. Set the zpci state explicitly. Signed-off-by:
-
Pierre Morel authored
The zPCI bus is in charge to handle common zPCI resources for zPCI devices. Creating the zPCI bus, the PCI bus, the zPCI devices and the PCI devices and hotplug slots done in a specific order: - PCI hotplug slot creation needs a PCI bus - PCI bus needs a PCI domain which is reported by the pci_domain_nr() when setting up the host bridge - PCI domain is set from the zPCI with devfn 0 this is necessary to have a reproducible enumeration Therefore we can not create devices or hotplug slots for any PCI device associated with a zPCI device before having discovered the function zero of the bus. The discovery and initialization of devices can be done at several points in the code: - On Events, serialized in a thread context - On initialization, in the kernel init thread context - When powering on the hotplug slot, in a user thread context The removal of devices and their parent bus may also be done on events or for devices when powering down the slot. To guarantee the existence of the bus and devices until they are no more needed we use kref in zPCI bus and introduce a reference count in the zPCI devices. In this patch the zPCI bus still only accept a device with a devfn 0. Signed-off-by:
-
Pierre Morel authored
Firmware provides the bus/devfn part of the PCI addresses of a zPCI function inside the new field RID of the CLP query PCI function with a bit to know if this field is available to use. Let's add these fields to the clp_rsp_query_pci structure, add corresponding fields to zdev and initialize them. Signed-off-by:
-
Pierre Morel authored
Using PCI multifunctions in S390 is a new feature we may want to ignore to continue provide the same topology as in the past to userland even if the configuration supports exposing the topology of a multi-Function device. A new boolean parameters allows to overwrite the kernel pci configuration: - pci=norid when on, disallow the use a new firmware field, RID, which provides the PCI <bus>:<device>.<function> part of the PCI address. To be used in the following patches and satisfy the checkpatch.pl the variable is exposed in pci.h Signed-off-by:
-
Pierre Morel authored
In the future the bus sysdata may not directly point to the zpci_dev. In preparation of upcoming patches let us abstract the access to the zpci_dev from the device inside the pci device. Signed-off-by:
-
Alexander Schmidt authored
Add SysFS attribute that provides the port number for PCI functions representing a single port of a multi-port device. Signed-off-by:
Alexander Schmidt <alexs@linux.ibm.com> Signed-off-by:
-
- 19 Apr, 2020 4 commits
-
-
Linus Torvalds authored
-
Brian Geffon authored
When remapping a mapping where a portion of a VMA is remapped into another portion of the VMA it can cause the VMA to become split. During the copy_vma operation the VMA can actually be remerged if it's an anonymous VMA whose pages have not yet been faulted. This isn't normally a problem because at the end of the remap the original portion is unmapped causing it to become split again. However, MREMAP_DONTUNMAP leaves that original portion in place which means that the VMA which was split and then remerged is not actually split at the end of the mremap. This patch fixes a bug where we don't detect that the VMAs got remerged and we end up putting back VM_ACCOUNT on the next mapping which is completely unreleated. When that next mapping is unmapped it results in incorrectly unaccounting for the memory which was never accounted, and eventually we will underflow on the memory comittment. There is also another issue which is similar, we're currently accouting for the number of pages in the new_vma but that's wrong. We need to account for the length of the remap operation as that's all that is being added. If there was a mapping already at that location its comittment would have been adjusted as part of the munmap at the start of the mremap. A really simple repro can be seen in: https://gist.github.com/bgaff/e101ce99da7d9a8c60acc641d07f312c Fixes: e346b381 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Brian Geffon <bgeffon@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "Two build fixes for a couple clk drivers and a fix for the Unisoc serial clk where we want to keep it on for earlycon" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sprd: don't gate uart console clock clk: mmp2: fix link error without mmp2 clk: asm9260: fix __clk_hw_register_fixed_rate_with_accuracy typo
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 and objtool fixes from Thomas Gleixner: "A set of fixes for x86 and objtool: objtool: - Ignore the double UD2 which is emitted in BUG() when CONFIG_UBSAN_TRAP is enabled. - Support clang non-section symbols in objtool ORC dump - Fix switch table detection in .text.unlikely - Make the BP scratch register warning more robust. x86: - Increase microcode maximum patch size for AMD to cope with new CPUs which have a larger patch size. - Fix a crash in the resource control filesystem when the removal of the default resource group is attempted. - Preserve Code and Data Prioritization enabled state accross CPU hotplug. - Update split lock cpu matching to use the new X86_MATCH macros. - Change the split lock enumeration as Intel finaly decided that the IA32_CORE_CAPABILITIES bits are not architectural contrary to what the SDM claims. !@#%$^! - Add Tremont CPU models to the split lock detection cpu match. - Add a missing static attribute to make sparse happy" * tag 'x86-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/split_lock: Add Tremont family CPU models x86/split_lock: Bits in IA32_CORE_CAPABILITIES are not architectural x86/resctrl: Preserve CDP enable over CPU hotplug x86/resctrl: Fix invalid attempt at removing the default resource group x86/split_lock: Update to use X86_MATCH_INTEL_FAM6_MODEL() x86/umip: Make umip_insns static x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE objtool: Make BP scratch register warning more robust objtool: Fix switch table detection in .text.unlikely objtool: Support Clang non-section symbols in ORC generation objtool: Support Clang non-section symbols in ORC dump objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings
-
