- 28 Sep, 2022 40 commits
-
-
Chris Morgan authored
Add support for the Rockchip rk817 battery charger integrated into the rk817 PMIC. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Signed-off-by:
Maya Matuszczyk <maccraft123mc@gmail.com> Acked-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220827021623.23829-4-macroalpha82@gmail.com
-
ChiYuan Huang authored
Fix the indentation in the binding example. There're two redudant space charactors need to be removed. Fixes: 76f52f815f1a ("dt-bindings: mfd: Add MediaTek MT6370") Signed-off-by:ChiYuan Huang <cy_huang@richtek.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Jens Hillenstedt authored
In da9062_i2c_probe() regmap_clear_bits() tries to access CONFIG_J register. As CONFIG_J is not present in da9061_aa_writeable_ranges[] probe of da9061 fails: da9062 2-0058: Entering I2C mode! da9062 2-0058: Failed to set Two-Wire Bus Mode. da9062: probe of 2-0058 failed with error -5 Add CONFIG_J register to da9061_aa_writeable_ranges[]. Fixes: 5c6f0f45 ("mfd: da9062: Support SMBus and I2C mode") Signed-off-by:
Jens Hillenstedt <jens.hillenstedt@ise.de> Reviewed-by:
Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> Signed-off-by:
-
Peng Wu authored
The gpiochip_request_own_desc() function returns error pointers on error, it doesn't return NULL. Fixes: 0ef5164a81fbf ("mfd/omap1: htc-i2cpld: Convert to a pure GPIO driver") Signed-off-by:Peng Wu <wupeng58@huawei.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Commit 7677ed11 ("dt-bindings: mfd: qcom,tcsr: Convert to dtschema") converted bindings to DT schema literally - including the qcom,tcsr-ipq6018 expecting syscon and simple-mfd. Such configuration is not used in DTS and there is no actual need of it. The TCSR block is purely configuration block and should not have children. Any child device should be simply moved outside of TCSR syscon block. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by:
-
Jiasheng Jiang authored
As platform_driver_register() can return error numbers, it should be better to check platform_driver_register() and deal with the exception. Fixes: b6d6454f ("[PATCH] mfd: SM501 core driver") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by:
-
Allen-KH Cheng authored
Add a new scpsys compatible for mt8186 SoC. Signed-off-by:
Allen-KH Cheng <allen-kh.cheng@mediatek.com> Acked-by:
-
Andy Shevchenko authored
With compile testing on non-OMAP platforms compiler might be not happy: In function ‘twl4030_sih_setup’: error: implicit declaration of function ‘dev_err’ [-Werror=implicit-function-declaration] error: implicit declaration of function ‘dev_info’ [-Werror=implicit-function-declaration] In function ‘twl4030_init_irq’: error: invalid use of undefined type ‘struct device’ Add missed header. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Conor Dooley authored
Commit 5621d3977e29 ("dt-bindings: mfd: Add missing (unevaluated| additional)Properties on child nodes") exposed a flaw in the original binding, where "merged" versions of some regulators were missing, leading to warnings on the HiFive Unmatched Devicetree. Add the missing patterns (and merge some of the trivial ones). Signed-off-by:Conor Dooley <conor.dooley@microchip.com> Acked-by:
-
Chunyan Zhang authored
Add bindings for Unisoc system global register which provide register map for clocks. Signed-off-by:
Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by:
Cixi Geng <cixi.geng1@unisoc.com> Reviewed-by:
-
Andy Shevchenko authored
Letting the compiler remove these functions when the kernel is built without CONFIG_PM_SLEEP support is simpler and less heavier for builds than the use of __maybe_unused attributes. Signed-off-by:
-
Sebastian Reichel authored
Document rk3588 compatible for QoS registers. Acked-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Dmitry Torokhov authored
This patch switches the driver away from legacy gpio/of_gpio API to gpiod API, and removes use of of_get_named_gpio_flags() which I want to make private to gpiolib. We also need to patch relevant DTS files, as the original code relied on the fact that of_get_named_gpio_flags() would fetch any data encoded in GPIO flags, even if it does not reflect valid flags for a GPIO. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by:
-
Luca Weiss authored
Document the compatible for pm7250b that is used with e.g. sm6350. Also while we're at it, sort the compatibles alphabetically. Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Acked-by:
-
Rob Herring authored
In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically). Signed-off-by:
Alistair Francis <alistair@alistair23.me> Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by:
-
Linus Walleij authored
Instead of passing GPIO numbers pertaining to ourselves through platform data, just request GPIO descriptors from our own GPIO chips and use them, and cut down on the unnecessary complexity. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Cory Maccarrone <darkstar6262@gmail.com> Cc: linux-omap@vger.kernel.org Signed-off-by:
-
Russ Weight authored
Add the D5005 BMC secure update driver to the MAX10 BMC driver for D5005 devices. Signed-off-by:
Russ Weight <russell.h.weight@intel.com> Signed-off-by:
-
Krzysztof Kozlowski authored
reg-io-width is a standard property, so no need for defining its type Signed-off-by:
-
Chris Morgan authored
Create dt-binding documentation to document rk817 battery and charger usage. New device-tree properties have been added. - rockchip,resistor-sense-micro-ohms: The value in microohms of the sample resistor. - rockchip,sleep-enter-current-microamp: The value in microamps of the sleep enter current. - rockchip,sleep-filter-current: The value in microamps of the sleep filter current. Signed-off-by: -
Krzysztof Kozlowski authored
Emails to Robert Jones bounce ("550 5.2.1 The email account that you tried to reach is disabled"). Signed-off-by:Tim Harvey <tharvey@gateworks.com> Signed-off-by:
-
Robert Marko authored
Add support for PMP8074 PMIC which is a companion PMIC for the Qualcomm IPQ8074 SoC-s. It shares the same subtype identifier as PM8901. Signed-off-by:
Robert Marko <robimarko@gmail.com> Signed-off-by:
-
Robert Marko authored
Document compatible for the PMP8074 PMIC. Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Dan Carpenter authored
The mx25_tsadc_remove() function assumes all non-zero returns are success but the platform_get_irq() function returns negative on error and positive non-zero values on success. It never returns zero, but if it did then treat that as a success. Fixes: 18f77393 ("mfd: fsl-imx25: Clean up irq settings during removal") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Martin Kaiser <martin@kaiser.cx> Signed-off-by:
-
Krzysztof Kozlowski authored
Document existing (MSM8996, SC7280) and new compatibles for TCSR syscon registers (QCS404, SC7180, SDM630, SDM845, SM8150, MSM8998). Signed-off-by:
-
Krzysztof Kozlowski authored
There are two bindings for Qualcomm SPMI PMIC Thermal Monitoring ADC: one for ADC HC and one for ADC TM5 and TM7. PM8998 uses the former one, so fix matching of child schema: qcom/msm8998-asus-novago-tp370ql.dtb: pmic@0: adc-tm@3400:compatible:0: 'qcom,spmi-adc-tm-hc' is not one of ['qcom,spmi-adc-tm5', 'qcom,spmi-adc-tm5-gen2', 'qcom,adc-tm7'] Fixes: 3f5117be ("dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC") Signed-off-by:
-
Krzysztof Kozlowski authored
The regulators node of Qualcomm SPMI PMIC represents sub-device, so it has its own compatible, multiple regulators and uses dedicated bindings. Fixes: 3f5117be ("dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC") Signed-off-by:
-
Krzysztof Kozlowski authored
Add a more complete example with PM6150 to provide better validation of the bindings. Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
The syscon bindings require a device specific compatible, beside the "syscon". However schema counts "simple-mfd" as such, which allows simple-mfd+syscon to sneak in. Adjust the match to be sure simple-mfd also comes with a device specific compatible. Signed-off-by:
-
Krzysztof Kozlowski authored
Conversion from TXT to DT schema lost several compatibles. Fixes: 3f5117be ("dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC") Signed-off-by:
David Heidelberg <david@ixit.cz> Acked-by:
-
Tinghan Shen authored
The System Control Processor System (SCPSYS) has several power management related tasks in the system. Add the bindings for it. Signed-off-by:
Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-by:
-
Rob Herring authored
Convert the aspeed,ast2[456]00-scu binding to DT schema format. The original binding was missing '#address-cells', '#size-cells', 'ranges', and child nodes, so add them. Signed-off-by:
-
ChiYuan Huang authored
Add Richtek RT5120 PMIC devicetree document. Reviewed-by:
-
ChiYuan Huang authored
Add Richtek RT5120 PMIC I2C driver. Signed-off-by:
-
Michal Oleszczyk authored
When we consider MFD which implements hotplug (e.g. USB hotplug driver based on product and vendor IDs) functionality it turns out that its sub-devices are correctly matched with corresponding device tree nodes only at the first time. When physical device reboots or is replugged (and MFD driver is disconnected and probed back again) all sub-devices fails in mfd_add_device() with error 'Failed to locate of_node'. The reason of that behavior is that when any MFD sub-device is created for the first time (and matched with device tree node) it is added to the mfd_of_node_list. It looks like this list is never cleaned even if devices added there are intentionally removed from the system. So when MFD device is replugged and all sub-devices are matched with their device tree nodes again they fail as matched nodes already exist in mfd_of_node_list. In other words current implementation does not support MFD with hotplug feature. This commit extends MFD core for hotplugging support by removing appropriate OF node entry from mfd_of_node_list when corresponding device is removed from the system. Thanks to that when device is added once again it can be matched with its device tree node successfully. Signed-off-by:
Michal Oleszczyk <oleszczyk.m@gmail.com> Signed-off-by:
-
Jason Wang authored
The double `to' is duplicated in the comment, remove one. Signed-off-by:
Jason Wang <wangborong@cdjrlc.com> Signed-off-by:
-
Christophe JAILLET authored
In lp8788_irq_init(), if an error occurs after a successful irq_domain_add_linear() call, it must be undone by a corresponding irq_domain_remove() call. irq_domain_remove() should also be called in lp8788_irq_exit() for the same reason. Fixes: eea6b7cc ("mfd: Add lp8788 mfd driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
Should an error occurs in mfd_add_devices(), some resources need to be released, as already done in the .remove() function. Add an error handling path and a lp8788_irq_exit() call to undo a previous lp8788_irq_init(). Fixes: eea6b7cc ("mfd: Add lp8788 mfd driver") Signed-off-by:
-
Christophe JAILLET authored
If devm_of_platform_populate() fails, some resources need to be released. Introduce a mx25_tsadc_unset_irq() function that undoes mx25_tsadc_setup_irq() and call it both from the new error handling path of the probe and in the remove function. Fixes: a55196ef ("mfd: fsl-imx25: Use devm_of_platform_populate()") Signed-off-by:
-
Samuel Holland authored
AXP228 is a PMIC used on boards such as the Clockwork ClockworkPi and DevTerm. Its register map appears to be identical to the AXP221 variant. The only known difference is in the default values for regulator on/off states and voltages. Signed-off-by:
Samuel Holland <samuel@sholland.org> Acked-by:
-
