Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240424-apcs-mboxes-v1-5-6556c47cb501@z3ntu.xyzSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240424-apcs-mboxes-v1-4-6556c47cb501@z3ntu.xyzSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240424-apcs-mboxes-v1-3-6556c47cb501@z3ntu.xyzSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Device nodes should have generic names. Use 'clock-controller@' as a GCC
node name instead of a non-generic 'gcc@'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-14-69c63d0ae1e7@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Device nodes should have generic names. Use 'clock-controller@' as a GCC
node name instead of a non-generic 'gcc@'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-13-69c63d0ae1e7@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

On IPQ9574 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-12-69c63d0ae1e7@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

On IPQ5332 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-11-69c63d0ae1e7@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

On IPQ5018 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-10-69c63d0ae1e7@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The commit 65931e59 ("arm64: dts: qcom: sm8650: move USB graph to
the SoC dtsi") and commit fbb22a18 ("arm64: dts: qcom: sm8650: move
PHY's orientation-switch to SoC dtsi") have moved some of the properties
from the board DT files to the sm8650.dtsi. As the patch for sm8650 HDK
predates those commits, it still had those properties inside.

Drop these duplicate proerties from the sm8650-hdk.dts.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240530-sm8650-hdk-redundant-v1-1-c39c2ae65f3b@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Configure the Type-C and VBUS regulator on PM7250B and wire it up to the
USB PHY, so that USB role and orientation switching works.

For now USB Power Delivery properties are skipped / disabled, so that
the (presumably) bootloader-configured charger doesn't get messed with
and we can charge the phone with at least some amount of power.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240530-fp4-tcpm-v3-3-612d4bbd5e09@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Type-C port management functionality lives inside of the PMIC block on
pm7250b.

The Type-C port management logic controls orientation detection,
vbus/vconn sense and to send/receive Type-C Power Domain messages.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240530-fp4-tcpm-v3-2-612d4bbd5e09@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the required DTS node for the USB VBUS output regulator, which is
available on PM7250B. This will provide the VBUS source to connected
peripherals.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240530-fp4-tcpm-v3-1-612d4bbd5e09@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

On both the CRD and QCP, on PCIe 6a sits the NVMe. Add the 3.3V
gpio-controlled regulator and the clkreq, perst and wake gpios as
resources for the PCIe 6a.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-pcie6a-v1-3-ee17a9939ba5@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The actual PHY regulator is L1d instead of L3j, so fix it accordingly.

Fixes: f9a9c114 ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org      # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-pcie6a-v1-2-ee17a9939ba5@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The actual PHY regulator is L1d instead of L3j, so fix it accordingly.

Fixes: d7e03cce ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org      # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-pcie6a-v1-1-ee17a9939ba5@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J.
Also add the missing supplies to QMP PHYs.

Fixes: f9a9c114 ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org      # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-fix-usb-phy-supplies-v1-2-6eb72a546227@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J.
Also add the missing supplies to QMP PHYs.

Fixes: d7e03cce ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org      # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-fix-usb-phy-supplies-v1-1-6eb72a546227@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

OTG is default usb dr_mode, so this property can be removed.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20240531090422.158813-3-quic_tengfan@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The usb-role-switch is SM8550 SoC property, so move it from board dts
to SM8550 SoC dtsi.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240531090422.158813-2-quic_tengfan@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add a simple-mfd representing IMEM on SA8775p and define the PIL
relocation info region, so that post mortem tools will be able
to locate the loaded remoteprocs.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240531093531.238075-3-quic_tengfan@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add qcom,sa8775p-imem compatible name support.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240531093531.238075-2-quic_tengfan@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

It looks like "cdsp_mem" was pasted in the license header by accident.
Fix the typo by removing it.
Signed-off-by: David Wronek <david@mainlining.org>
Fixes: ba2c082a ("arm64: dts: qcom: sm8550: Add support for Samsung Galaxy Z Fold5")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240531-fix-typo-q5q-v1-1-95f10a8eff9b@mainlining.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Chipsets before SM8450 have only one broadcast register (Broadcast_OR)
which is used to broadcast writes and check for status bit 0 only in
all channels.
>From SM8450 onwards, a new Broadcast_AND region was added which checks
for status bit 1. This hasn't been updated and Broadcast_OR region
was wrongly being used to check for status bit 1 all along.
Hence mapping Broadcast_AND region's address space to LLCC in SM8650.
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Link: https://lore.kernel.org/r/3a8804b35f44485637398faa9c0bda76813fe4d7.1717014052.git.quic_uchalich@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Chipsets before SM8450 have only one broadcast register (Broadcast_OR)
which is used to broadcast writes and check for status bit 0 only in
all channels.
>From SM8450 onwards, a new Broadcast_AND region was added
which checks for status bit 1. This hasn't been updated and Broadcast_OR
region was wrongly being used to check for status bit 1 all along.
Hence mapping Broadcast_AND region's address space to LLCC in SM8550.
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Link: https://lore.kernel.org/r/9bb6e086adec4d3b2134462d504822fb79b009e7.1717014052.git.quic_uchalich@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Chipsets before SM8450 have only one broadcast register (Broadcast_OR)
which is used to broadcast writes and check for status bit 0 only in
all channels.
>From SM8450 onwards, a new Broadcast_AND region was added which checks
for status bit 1. This hasn't been updated and Broadcast_OR region
was wrongly being used to check for status bit 1 all along.
Hence mapping Broadcast_AND region's address space to LLCC in SM8450.
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Link: https://lore.kernel.org/r/bfc817da4188abdf5b543bedafb9cb0eb82806c2.1717014052.git.quic_uchalich@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add llcc support for the SA8775p platform.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20240529101534.3166507-4-quic_tengfan@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The SHIFTphone 8 is an upcoming QCM6490 smartphone, it has the following
features:

* 12GB of RAM, 512GB UFS storage
* 1080p display.
* Hardware kill switches for cameras and microphones
* UART access via type-c SBU pins (enabled by an internal switch)

Initial support includes:

* Framebuffer display
* UFS and sdcard storage
* Battery monitoring and USB role switching via pmic glink
* Bluetooth
* Thermals
* Wifi
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240530-otter-bringup-v3-2-79e7a28c1b08@linaro.org
[bjorn: Fixed indent of block comments]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

The SHIFTphone 8 (codename otter) is a smartphone based on the QCM6490
SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Link: https://lore.kernel.org/r/20240530-otter-bringup-v3-1-79e7a28c1b08@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

During the initial bringup, all of the peripherals on non-SMB PMICs
were either not used, or were not necessary to accomplish certain
goals. This however, left a hole in the hardware description.

Add the missing ones.

Note that the PM8010 errors out on reads on the CRD (works fine on the
QCP) for reasons unknown, but that shall be ironed out in the future..
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240529-topic-x1e_pmic-v1-2-9de0506179eb@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add support for Samsung Galaxy Z Fold5 (q5q) foldable phone based on sm8550

Currently working features:
- Framebuffer
- UFS
- i2c
- Buttons
Signed-off-by: Alexandru Marc Serdeliuc <serdeliuk@yahoo.com>
Link: https://lore.kernel.org/r/20240411-samsung-galaxy-zfold5-q5q-v6-2-8142297515aa@yahoo.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

This documents Samsung Galaxy Z Fold5 (samsung,q5q)
which is a foldable phone by Samsung based on the sm8550 SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandru Marc Serdeliuc <serdeliuk@yahoo.com>
Link: https://lore.kernel.org/r/20240411-samsung-galaxy-zfold5-q5q-v6-1-8142297515aa@yahoo.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the device-tree nodes for the TBUs (translation buffer units) that
are present on the sc7280 platforms. The TBUs can be used debug the
kernel and provide additional information when a context faults occur.

Describe all the registers, clocks, interconnects and power-domain
resources that are needed for each of the TBUs.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-8-quic_c_gdjako@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the device-tree nodes for the TBUs (translation buffer units) that
are present on the sdm845 platforms. The TBUs can be used debug the
kernel and provide additional information when a context faults occur.

Describe the all registers, clocks, interconnects and power-domain
resources that are needed for each of the TBUs.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-6-quic_c_gdjako@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

PCIe host controller driver needs to choose the appropriate performance
state of RPMh power domain and interconnect bandwidth based on the PCIe
data rate.

Hence, add the OPP table support to specify RPMh performance states and
interconnect peak bandwidth.

It should be noted that the different link configurations may share the
same aggregate bandwidth, e.g., a 2.5 GT/s x2 link and a 5.0 GT/s x1
link have the same bandwidth and share the same OPP entry.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Link: https://lore.kernel.org/r/20240518-opp_support-v13-4-78c73edf50de@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add PCIe-MEM & CPU-PCIe interconnect path to the PCIe nodes.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Link: https://lore.kernel.org/r/20240518-opp_support-v13-1-78c73edf50de@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Ethernet devices are cache coherent, mark it as such in the dtsi.

Fixes: ff499a0f ("arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface")
Fixes: e952348a ("arm64: dts: qcom: sa8775p: add a node for EMAC1")
Signed-off-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com>
Link: https://lore.kernel.org/r/20240514-mark_ethernet_devices_dma_coherent-v4-1-04e1198858c5@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The ath10k driver waits for an "MSA_READY" indicator
to complete initialization. If the indicator is not
received, then the device remains unusable.

cf. ath10k_qmi_driver_event_work()

Several msm8998-based devices are affected by this issue.
Oddly, it seems safe to NOT wait for the indicator, and
proceed immediately when QMI_EVENT_SERVER_ARRIVE.

Jeff Johnson wrote:

  The feedback I received was "it might be ok to change all ath10k qmi
  to skip waiting for msa_ready", and it was pointed out that ath11k
  (and ath12k) do not wait for it.

  However with so many deployed devices, "might be ok" isn't a strong
  argument for changing the default behavior.

cf. also
https://wiki.postmarketos.org/wiki/Qualcomm_Snapdragon_835_(MSM8998)#WLANSigned-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/0914f96e-fcfd-4088-924a-fc1991bce75f@freebox.frSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable the vibrator on the PMI632 which is used on this phone.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240418-fp3-vibra-v1-2-b636b8b3ff32@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add a node for the vibrator module found inside the PMI632.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240418-fp3-vibra-v1-1-b636b8b3ff32@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Arm heterogeneous configurations should have separate PMU nodes for each
CPU uarch as the uarch specific events can be different. The
"arm,armv8-pmuv3" compatible is also intended for s/w models rather than
specific uarch implementations.

All the kryo CPUs are missing PMU compatibles, so they can't be fixed.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20240417204247.3216703-1-robh@kernel.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>