- 01 Dec, 2022 9 commits
-
-
Chris Morgan authored
The RGB565 format with padding over 24 bits (MEDIA_BUS_FMT_RGB565_1X24_CPADHI) is supported by the vc4 DPI controller. This is what the Geekworm MZP280 DPI display uses, so let's add support for it in the DPI controller driver. Reviewed-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-4-eb76e26a772d@cerno.techSigned-off-by:
Maxime Ripard <maxime@cerno.tech>
-
Joerg Quinten authored
Add the BGR666 format MEDIA_BUS_FMT_BGR666_1X24_CPADHI supported by the RaspberryPi. Signed-off-by:
Joerg Quinten <aBUGSworstnightmare@gmail.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-3-eb76e26a772d@cerno.techSigned-off-by:
-
Joerg Quinten authored
Add the BGR666 format MEDIA_BUS_FMT_BGR666_1X18 supported by the RaspberryPi. Signed-off-by:
-
Chris Morgan authored
Add the MEDIA_BUS_FMT_RGB565_1X24_CPADHI format used by the Geekworm MZP280 panel for the Raspberry Pi. Signed-off-by:
-
Maxime Ripard authored
The len variable is used while uninitialized. Initialize it. Fixes: 1e4a91db ("drm/probe-helper: Provide a TV get_modes helper") Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20221201090736.290935-1-maxime@cerno.techSigned-off-by:
-
Maxime Ripard authored
The mode name in struct drm_cmdline_mode can hold 32 characters at most, which can easily get overrun. Switch to strscpy() to prevent such a thing. Reported-by:
coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1527354 ("Security best practices violations") Fixes: a7ab1553 ("drm/modes: Switch to named mode descriptors") Reviewed-by:
-
Maxime Ripard authored
The underline length for the new Analog TV properties section doesn't match the title length, resulting in a warning. Fixes: 7d63cd85 ("drm/connector: Add TV standard property") Reported-by:
-
Matti Vaittinen authored
Simplify using the devm_regulator_get_enable_optional(). Also drop the now unused struct member 'hdmi_supply'. Signed-off-by:
Matti Vaittinen <mazziesaccount@gmail.com> Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/df0096b5aea2a18d1540cde379c5abf589ccd7c4.1669799805.git.mazziesaccount@gmail.com
-
Matti Vaittinen authored
Simplify using devm_regulator_bulk_get_enable() Signed-off-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
- 29 Nov, 2022 11 commits
-
-
Alaa Emad authored
Change min cursor size of vkms driver from 20 to 10, to increase the IGT test coverage of vkms by enabling 32x10 cursor size subtests in kms_cursor_crc Signed-off-by:
Alaa Emad <aemad@igalia.com> Reviewed-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221109113945.20938-1-aemad@igalia.com
-
Yuan Can authored
A null-ptr-deref is triggered when it tries to destroy the workqueue in vkms->output.composer_workq in vkms_release(). KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] CPU: 5 PID: 17193 Comm: modprobe Not tainted 6.0.0-11331-gd465bff1 #24 RIP: 0010:destroy_workqueue+0x2f/0x710 ... Call Trace: <TASK> ? vkms_config_debugfs_init+0x50/0x50 [vkms] __devm_drm_dev_alloc+0x15a/0x1c0 [drm] vkms_init+0x245/0x1000 [vkms] do_one_initcall+0xd0/0x4f0 do_init_module+0x1a4/0x680 load_module+0x6249/0x7110 __do_sys_finit_module+0x140/0x200 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The reason is that an OOM happened which triggers the destroy of the workqueue, however, the workqueue is alloced in the later process, thus a null-ptr-deref happened. A simple call graph is shown as below: vkms_init() vkms_create() devm_drm_dev_alloc() __devm_drm_dev_alloc() devm_drm_dev_init() devm_add_action_or_reset() devm_add_action() # an error happened devm_drm_dev_init_release() drm_dev_put() kref_put() drm_dev_release() vkms_release() destroy_workqueue() # null-ptr-deref happened vkms_modeset_init() vkms_output_init() vkms_crtc_init() # where the workqueue get allocated Fix this by checking if composer_workq is NULL before passing it to the destroy_workqueue() in vkms_release(). Fixes: 6c234fe3 ("drm/vkms: Implement CRC debugfs API") Signed-off-by:
Yuan Can <yuancan@huawei.com> Reviewed-by:
-
Yuan Can authored
A memory leak was reported after the vkms module install failed. unreferenced object 0xffff88810bc28520 (size 16): comm "modprobe", pid 9662, jiffies 4298009455 (age 42.590s) hex dump (first 16 bytes): 01 01 00 64 81 88 ff ff 00 00 dc 0a 81 88 ff ff ...d............ backtrace: [<00000000e7561ff8>] kmalloc_trace+0x27/0x60 [<000000000b1954a0>] 0xffffffffc45200a9 [<00000000abbf1da0>] do_one_initcall+0xd0/0x4f0 [<000000001505ee87>] do_init_module+0x1a4/0x680 [<00000000958079ad>] load_module+0x6249/0x7110 [<00000000117e4696>] __do_sys_finit_module+0x140/0x200 [<00000000f74b12d2>] do_syscall_64+0x35/0x80 [<000000008fc6fcde>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 The reason is that the vkms_init() returns without checking the return value of vkms_create(), and if the vkms_create() failed, the config allocated at the beginning of vkms_init() is leaked. vkms_init() config = kmalloc(...) # config allocated ... return vkms_create() # vkms_create failed and config is leaked Fix this problem by checking return value of vkms_create() and free the config if error happened. Fixes: 2df7af93 ("drm/vkms: Add vkms_config type") Signed-off-by: -
Drew Davenport authored
Avoid the panel oscillating on and off during boot. In some cases it will be more than 1000ms between powering the panel to read the EDID early during boot, and enabling the panel for display. Extending the autosuspend delay avoids autosuspending during this interval. Signed-off-by:
Drew Davenport <ddavenport@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Drew Davenport authored
Same change as done for panel-samsung-atna33xc20. Extend the autosuspend delay to avoid oscillating between power status during boot. Signed-off-by:
-
Drew Davenport authored
ktime_get_boottime continues while the device is suspended. This change ensures that the resume path will not be delayed if the power off delay has already been met while the device is suspended Signed-off-by:
-
Drew Davenport authored
ktime_get_boottime continues while the device is suspended. This change ensures that the resume path will not be delayed if the power off delay has already been met while the device is suspended Signed-off-by:
-
Drew Davenport authored
ktime_get is based on CLOCK_MONOTONIC which stops on suspend. On suspend, the time that the panel was powerd off is recorded with ktime_get, and on resume this time is compared to the current ktime_get time to determine if the driver should wait for the panel to power down completely before re-enabling it. Because we're using ktime_get, this delay doesn't account for the time that the device is suspended, during which the power down delay may have already elapsed. Change to use ktime_get_boottime throughout, which uses CLOCK_BOOTTIME which does not stop when suspended. This ensures that the resume path will not be delayed if the power off delay has already been met while the device is suspended. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
-
Yuan Can authored
A problem about insmod megachips-stdpxxxx-ge-b850v3-fw.ko failed is triggered with the following log given: [ 4497.981497] Error: Driver 'stdp4028-ge-b850v3-fw' is already registered, aborting... insmod: ERROR: could not insert module megachips-stdpxxxx-ge-b850v3-fw.ko: Device or resource busy The reason is that stdpxxxx_ge_b850v3_init() returns i2c_add_driver() directly without checking its return value, if i2c_add_driver() failed, it returns without calling i2c_del_driver() on the previous i2c driver, resulting the megachips-stdpxxxx-ge-b850v3-fw can never be installed later. A simple call graph is shown as below: stdpxxxx_ge_b850v3_init() i2c_add_driver(&stdp4028_ge_b850v3_fw_driver) i2c_add_driver(&stdp2690_ge_b850v3_fw_driver) i2c_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without delete stdp4028_ge_b850v3_fw_driver Fix by calling i2c_del_driver() on stdp4028_ge_b850v3_fw_driver when i2c_add_driver() returns error. Fixes: fcfa0ddc ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)") Signed-off-by:Andrzej Hajda <andrzej.hajda@intel.com> Tested-by:
Ian Ray <ian.ray@ge.com> Signed-off-by:
-
Jani Nikula authored
The file uses bool and struct completion, include the relevant headers. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221123130932.3863985-1-jani.nikula@intel.com
-
- 28 Nov, 2022 11 commits
-
-
Maxime Ripard authored
drm_kunit_device_init() is a public function meant to be used by other tests, but isn't exported. This leads to modpost errors when the other tests are compiled as module. Reported-by:
Maíra Canal <mairacanal@riseup.net> Signed-off-by:
-
Shang XiaoJing authored
Commit f0601ef8 ("drm/vc4: vec: Protect device resources after removal") add fail path for vc4_vec_encoder_enable(), and will put usage_counter only when pm_runtime_get_sync() succeeds. However, pm_runtime_get_sync() will increment usage_counter even it failed. Fix it by replacing it with pm_runtime_resume_and_get() to keep usage counter balanced. Fixes: e4b81f8c ("drm/vc4: Add support for the VEC (Video Encoder) IP") Signed-off-by:
Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20221124015113.18540-1-shangxiaojing@huawei.comSigned-off-by:
-
Maxime Ripard authored
It's fairly hard to figure out the instance of the CRTC affected by an atomic change using the default name. Since we can provide our own to the CRTC initialization functions, let's do so to make the debugging sessions easier. Reviewed-by:
-
Maxime Ripard authored
Both users of vc4_crtc_init need the same extra initialization to set the pointer to the platform_device and the CRTC data. Since it's mandatory, let's make them both arguments of vc4_crtc_init(). Reviewed-by:
-
Maxime Ripard authored
It makes more sense to register the CRTC before the encoder and connectors, so let's move our call around. Reviewed-by:
-
Maxime Ripard authored
The TXP is integrated as a separate CRTC/Encoder/Connector combo, but for some reason doesn't rely on the vc4_encoder type and it's associated type. Let's create a type to make it consistent with the other encoders. Reviewed-by:
-
Maxime Ripard authored
The current order of variable assignments is unneccessarily complex, let's make it simpler. Reviewed-by:
-
Maxime Ripard authored
On the vc4 devices (and later), the blending is done by a single device called the HVS. The HVS has three FIFO that can operate in parallel, and route their output to 6 CRTCs and 7 encoders on the BCM2711. Each of these CRTCs and encoders have some constraints on which FIFO they can feed from, so we need some code to take all those constraints into account and assign FIFOs to CRTCs. The problem can be simplified by assigning those FIFOs to CRTCs by ascending output index number. We had a comment mentioning it already, but we were never actually enforcing it. It was working still in most situations because the probe order is roughly equivalent, except for the (optional, and fairly rarely used on the Pi4) VEC which was last in the probe order sequence, but one of the earliest device to assign. This resulted in configurations that were rejected by our code but were still valid with a different assignment. We can fix this by making sure we assign CRTCs to FIFOs by ordering them by ascending HVS output index. Fixes: 87ebcd42 ("drm/vc4: crtc: Assign output to channel automatically") Reviewed-by:
-
Maxime Ripard authored
The vc4_hvs_get_(old|new)_global_state functions don't modify the drm_atomic_state passed as an argument, so let's make it const. Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v1-13-051a0bb60a16@cerno.techReviewed-by:
-
Maxime Ripard authored
None of our wrappers around container_of to access our objects from the DRM object pointer actually modify the latter. Let's make them const. Reviewed-by:
-
Maxime Ripard authored
The drm_atomic_get_(old|new)_*_state don't modify the passed drm_atomic_state, so we can make it const. Reviewed-by:
-
- 25 Nov, 2022 2 commits
-
-
Geert Uytterhoeven authored
Freescale/NXP i.MX LCDIF and eLCDIF LCD controllers are only present on Freescale/NXP i.MX SoCs. Hence add a dependency on ARCH_MXS || ARCH_MXC, to prevent asking the user about this driver when configuring a kernel without Freescale/NXP i.MX support. Fixes: 45d59d70 ("drm: Add new driver for MXSFB controller") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Geert Uytterhoeven authored
The Freescale/NXP i.MX LCDIFv3 LCD controller is only present on Freescale/NXP i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the user about this driver when configuring a kernel without Freescale/NXP i.MX support. Fixes: 9db35bb3 ("drm: lcdif: Add support for i.MX8MP LCDIF variant") Signed-off-by:
-
- 24 Nov, 2022 7 commits
-
-
Thomas Zimmermann authored
If no preferred value for bits-per-pixel has been given, fall back to 32. Never use the preferred depth. The color depth is the number of color/alpha bits per pixel, while bpp is the overall number of bits in most cases. Most noteworthy, XRGB8888 has a depth of 24 and a bpp value of 32. Using depth for bpp would make the value 24 as well and format selection in fbdev helpers fails. Unfortunately XRGB8888 is the most common format and the old heuristic therefore fails for most of the drivers (unless they implement the 24-bit RGB888 format). Picking a bpp of 32 will later on result in a default depth of 24 and the format XRGB8888. As XRGB8888 is the default format for most of the current and legacy graphics stack, all drivers must support it. So it is the safe choice. v2: * fix commit-message typo (Javier) Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20221123115348.2521-8-tzimmermann@suse.de
-
Thomas Zimmermann authored
Set the preferred color depth to 24 bits and the fbdev bpp to 32 bits. This will signal XRGB8888 as default format to clients. Signed-off-by:
-
Thomas Zimmermann authored
Set the preferred depth from the format of the scanout buffer. The value cannot be hardcoded, as the scanout buffer is only known at runtime. Also derive the fbdev emulation's bpp value from the scanout format. v2: * fix commit-message typo Signed-off-by:
-
Thomas Zimmermann authored
Set the preferred depth from the format of the scanout buffer. The value cannot be hardcoded, as the scanout buffer is only known at runtime. Keeping the existing switch statement just duplicates the driver's existing logic for format detection. Also remove the FIXME comment from the call to drm_fbdev_generic_setup() as the driver now handles color depth and bpp values correctly. v2: * fix commit-message typo Signed-off-by:
-
Thomas Zimmermann authored
Cirrus has a preferred color depth of 16 bit; also use it as fbdev bpp value. Don't use the color depth directly. It has a different meaning than bpp and both cannot be used interchangeably. Signed-off-by:
-
Thomas Zimmermann authored
Logicvc can have different values for the preferred color depth. Set the fbdev bpp value depending on the runtime value. v2: * remove unused color depth of 15 from switch (Javier) Signed-off-by:
-
Thomas Zimmermann authored
Set the preferred color depth to 24 bits and the fbdev bpp to 32 bits. This will signal XRGB8888 as default format to clients. Signed-off-by:
-
