- 07 Jun, 2017 1 commit
-
-
Maarten Lankhorst authored
This fixes the following depmod error when building drm as a module: depmod: ERROR: Found 6 modules in dependency cycles! depmod: ERROR: Cycle detected: drm -> drm_kms_helper -> drm Fixes: 13dfc054 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.") Tested-by:
Lofstedt, Marta <marta.lofstedt@intel.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/3fd262cf-1db6-4335-320c-af92f9014502@linux.intel.com
-
- 05 Jun, 2017 7 commits
-
-
Eric Anholt authored
This cuts 135 lines of boilerplate, at the cost of losing the filtering of get_modes() using atmel_hlcdc_dc_mode_valid(). The atomic check will still check that we don't set an invalid mode, though. Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Eric Anholt authored
drm_encoder_cleanup() finishes with memsetting it to 0, already. Acked-by:
-
Eric Anholt authored
Another 100 lines of boilerplate gone, while allowing for bridges to be connected in the display chain. Reviewed-by:
-
Eric Anholt authored
The newer version of the RPi panel driver is going to be a combination of a bridge and a panel, but we should also support panels without a bridge, so the panel-bridge layer lets us do that cleanly. v2: Drop "dev" argument. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Eric Anholt authored
Many DRM drivers have common code to make a stub connector implementation that wraps a drm_panel. By wrapping the panel in a DRM bridge, all of the connector code (including calls during encoder enable/disable) goes away. v2: Fix build with CONFIG_DRM=m, drop "dev" argument that should just be the panel's dev, move kerneldoc up a level and document _remove(). v3: Fix another breakage with CONFIG_DRM=m, fix breakage with CONFIG_OF=n, move protos under CONFIG_DRM_PANEL_BRIDGE, wrap a line. Signed-off-by: -
Jose Abreu authored
Now that we have a callback to check if bridge supports a given mode we can use it in Synopsys Designware HDMI bridge so that we restrict the number of probbed modes to the ones we can actually display. Also, there is no need to use mode_fixup() callback as mode_valid() will handle the mode validation. NOTE: I also had to change the pdata declaration of mode_valid custom callback so that the passed modes are const. I also changed in the platforms I found. Not even compiled it though. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: David Airlie <airlied@linux.ie> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Benjamin Gaignard authored
Use devm_of_platform_populate() to be sure that of_platform_depopulate is called when removing the driver. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> CC: Shawn Guo <shawnguo@kernel.org> CC: David Airlie <airlied@linux.ie> CC: dri-devel@lists.freedesktop.org CC: linux-kernel@vger.kernel.org Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/1496072763-31209-4-git-send-email-benjamin.gaignard@linaro.org
-
- 02 Jun, 2017 3 commits
-
-
Eric Anholt authored
Failing to do so meant that we got a resume() callback on first use of the device, so we would leak the bin BO that we allocated during probe. Signed-off-by:
-
Corentin Labbe authored
Instead of rewriting write/readq, use linux/io-64-nonatomic-lo-hi.h which already have them. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170602112510.17544-1-clabbe.montjoie@gmail.com
-
Jose Abreu authored
Now that we have a callback to check if crtc supports a given mode we can use it in atmel-hlcdc so that we restrict the number of probbed modes to the ones we can actually display. Also, remove the mode_fixup() callback as this is no longer needed because mode_valid() will be called before. Signed-off-by:
-
- 01 Jun, 2017 4 commits
-
-
Daniel Vetter authored
Only in the load failure path, where the hardware is quiet anyway. Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-19-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
IRQs are properly shut down, so it almost works as race-free shutdown. Except the irq is stopped after the vblank stuff, so boom anyway. Proper way would be to call drm_atomic_helper_shutdown before any of the kms things gets stopped. So no harm in removing the drm_vblank_cleanup here really. Same story for both hdlcd and mali. v2: Move misplaced malidp hunk to this patch (Liviu). Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Daniel Vetter authored
Pull a (much shorter) overview into drm_irq.c, and instead put the callback documentation into in-line comments in drm_drv.h. v2: Move the include stanzas back to the split-up patch (Stefan). Cc: Stefan Agner <stefan@agner.ch> Reviewed-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Daniel Vetter authored
drm_irq.c contains both the irq helper library (optional) and the vblank support (optional, but part of the modeset uapi, and doesn't require the use of the irq helpers at all. Split this up for more clarity of the scope of the individual bits. v2: Move misplaced hunks to this patch (Stefan). Cc: Stefan Agner <stefan@agner.ch> Reviewed-by:
-
- 31 May, 2017 13 commits
-
-
Boris Brezillon authored
Fixes a copy&paste error. Signed-off-by:
-
Arnd Bergmann authored
The driver is written in a way to enable compile-testing without CONFIG_ARM_AMBA, but it just causes needless warnings: drivers/gpu/drm/pl111/pl111_drv.c:149:26: error: 'pl111_drm_driver' defined but not used [-Werror=unused-variable] drivers/gpu/drm/pl111/pl111_drv.c:81:12: error: 'pl111_modeset_init' defined but not used [-Werror=unused-function] This unhides the probe/remove functions again and just leaves the driver object as unused when CONFIG_ARM_AMBA is disabled, with a __maybe_unused annotation to shut up the warning. Fixes: bed41005 ("drm/pl111: Initial drm/kms driver for pl111") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Ville Syrjälä authored
drm_atomic_set_mode_for_crtc() doesn't modify the passed mode, so let's make it const. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170518193837.393-1-ville.syrjala@linux.intel.comReviewed-by:
-
Daniel Vetter authored
CRTC don't seem to get shut down in a controlled fashion, but no one bothers to stop interrupts either so this races no matter what. Might as well remove it. A call to drm_atomic_helper_shutdown would be pretty sweet somewhere (and maybe getting rid of the load/unload callbacks while at it). Cc: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
-
Daniel Vetter authored
Again almost correct, but since interrupts are shut down after vblank still a race. Proper cleanup would call drm_atomic_helper_shutdown to make sure this really is safe. v2: Remove misplace malidp hunk (Liviu). Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by:
-
Daniel Vetter authored
It's only done in the driver load error path, where vblanks don't need to be quiescent anyway. And that's all drm_vblank_cleanup does, since the core will release the vblank allocations on its own already. So drop it. Cc: Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
-
Daniel Vetter authored
Again seems just cargo-culted. Cc: Neil Armstrong <narmstrong@baylibre.com> Acked-by:
-
Daniel Vetter authored
Again seems just cargo-culted. Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Acked-by:
Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
-
Daniel Vetter authored
Again seems just cargo-culted ... It's not ordered against any irq/vblank/modeset shutdown. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Daniel Vetter authored
The kernel doc explained what needs to happen, but not how to most easily accomplish that using the functions. Fix that. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by:
-
Joe Perches authored
Using the extension saves a bit of code. Miscellanea: o Neaten and simplify dump_dp_payload_table o Removed trailing blank space from output $ size drivers/gpu/drm/drm_dp_mst_topology.o.* drivers/gpu/drm/tinydrm/*.o* text data bss dec hex filename 25848 0 16 25864 6508 drivers/gpu/drm/drm_dp_mst_topology.o.new 26091 0 16 26107 65fb drivers/gpu/drm/drm_dp_mst_topology.o.old 3362 2 0 3364 d24 drivers/gpu/drm/tinydrm/mipi-dbi.o.new 3376 2 0 3378 d32 drivers/gpu/drm/tinydrm/mipi-dbi.o.old Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Daniel Vetter authored
And document them lightly. Unfortunately kernel-doc isn't the most awesome for documenting #defines that don't look like functions, it makes functions out of them :-/ Signed-off-by:
-
Arnd Bergmann authored
When DRM_PANEL is disabled, we get a link error for pl111: drivers/gpu/built-in.o: In function `pl111_connector_destroy': pl111_connector.c:(.text+0x3487e6): undefined reference to `drm_panel_detach' For some reason this only appears in the latest linux-next although the driver appears to have used the symbol for a few weeks already. The solution however is simple enough, we just need to add a 'select' statement. Fixes: bed41005 ("drm/pl111: Initial drm/kms driver for pl111") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- 30 May, 2017 5 commits
-
-
Jose Abreu authored
Now that we have a callback to check if bridge supports a given mode we can use it in Analogix bridge so that we restrict the number of probbed modes to the ones we can actually display. Also, there is no need to use mode_fixup() callback as mode_valid() will handle the mode validation. Reviewed-by:
-
Jose Abreu authored
This patches makes use of the new mode_valid() callbacks introduced previously to validate the full video pipeline when modesetting. This calls the connector->mode_valid(), encoder->mode_valid(), bridge->mode_valid() and crtc->mode_valid() so that we can make sure that the mode will be accepted in every components. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Changes v1->v2: - Removed call to connector->mode_valid (Ville, Daniel) - Changed function name (Ville) - Use for_each_new_connector_in_state (Ville) - Do not validate if connector and mode didn't change (Ville) - Use new helpers to call mode_valid Signed-off-by:
-
Jose Abreu authored
This changes the connector probe helper function to use the new encoder->mode_valid(), bridge->mode_valid() and crtc->mode_valid() helper callbacks to validate the modes. The new callbacks are optional so the behaviour remains the same if they are not implemented. If they are, then the code loops through all the connector's encodersXbridgesXcrtcs and calls the callback. If at least a valid encoderXbridgeXcrtc combination is found which accepts the mode then the function returns MODE_OK. Signed-off-by:
-
Jose Abreu authored
Introduce a new helper function which calls mode_valid() callback for all bridges in an encoder chain. Signed-off-by:
-
Jose Abreu authored
Add a new helper to call crtc->mode_valid, connector->mode_valid and encoder->mode_valid callbacks. Suggested-by:
-
- 29 May, 2017 1 commit
-
-
Daniel Vetter authored
This is a leftover from the drm_bus days, where we've had a bus-specific device type for every bus type in drm_device. Except for pci (which we can't remove because dri1 drivers) this is all gone. And the virt driver also doesn't really need it, dev_to_virtio works perfectly fine. Cc: David Airlie <airlied@linux.ie> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Reviewed-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
- 26 May, 2017 6 commits
-
-
Gustavo Padovan authored
This is now completed. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Reviewed-by:
-
Gustavo Padovan authored
After converting all users to drm_for_each_connector_iter() we no longer need drm_for_each_connector() so we can go ahead and remove it. Signed-off-by:
-
Gustavo Padovan authored
Drop legacy drm_for_each_connector() in favor of the race-free drm_for_each_connector_iter(). v2: add missing drm_connector_list_iter_end(Daniel Vetter) Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
-
Gustavo Padovan authored
Drop legacy drm_for_each_connector() in favor of the race-free drm_for_each_connector_iter(). Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Gustavo Padovan authored
Drop legacy drm_for_each_connector() in favor of the race-free drm_for_each_connector_iter(). Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Gustavo Padovan authored
Drop legacy drm_for_each_connector() in favor of the race-free drm_for_each_connector_iter(). Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
-
