Skip to content

L
linux
Switch branch/tag
  1. 13 Dec, 2011 16 commits
    • Tejun Heo's avatar
      block, cfq: kill cic->key · 1238033c
      Tejun Heo authored 
      Now that lazy paths are removed, cfqd_dead_key() is meaningless and
cic->q can be used whereever cic->key is used.  Kill cic->key.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      1238033c
    • Tejun Heo's avatar
      block, cfq: kill ioc_gone · b50b636b
      Tejun Heo authored 
      Now that cic's are immediately unlinked under both locks, there's no
need to count and drain cic's before module unload.  RCU callback
completion is waited with rcu_barrier().

While at it, remove residual RCU operations on cic_list.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      b50b636b
    • Tejun Heo's avatar
      block, cfq: remove delayed unlink · b9a19208
      Tejun Heo authored 
      Now that all cic's are immediately unlinked from both ioc and queue,
lazy dropping from lookup path and trimming on elevator unregister are
unnecessary.  Kill them and remove now unused elevator_ops->trim().

This also leaves call_for_each_cic() without any user.  Removed.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      b9a19208
    • Tejun Heo's avatar
      block, cfq: unlink cfq_io_context's immediately · b2efa052
      Tejun Heo authored 
      cic is association between io_context and request_queue.  A cic is
linked from both ioc and q and should be destroyed when either one
goes away.  As ioc and q both have their own locks, locking becomes a
bit complex - both orders work for removal from one but not from the
other.

Currently, cfq tries to circumvent this locking order issue with RCU.
ioc->lock nests inside queue_lock but the radix tree and cic's are
also protected by RCU allowing either side to walk their lists without
grabbing lock.

This rather unconventional use of RCU quickly devolves into extremely
fragile convolution.  e.g. The following is from cfqd going away too
soon after ioc and q exits raced.

 general protection fault: 0000 [#1] PREEMPT SMP
 CPU 2
 Modules linked in:
 [   88.503444]
 Pid: 599, comm: hexdump Not tainted 3.1.0-rc10-work+ #158 Bochs Bochs
 RIP: 0010:[<ffffffff81397628>]  [<ffffffff81397628>] cfq_exit_single_io_context+0x58/0xf0
 ...
 Call Trace:
  [<ffffffff81395a4a>] call_for_each_cic+0x5a/0x90
  [<ffffffff81395ab5>] cfq_exit_io_context+0x15/0x20
  [<ffffffff81389130>] exit_io_context+0x100/0x140
  [<ffffffff81098a29>] do_exit+0x579/0x850
  [<ffffffff81098d5b>] do_group_exit+0x5b/0xd0
  [<ffffffff81098de7>] sys_exit_group+0x17/0x20
  [<ffffffff81b02f2b>] system_call_fastpath+0x16/0x1b

The only real hot path here is cic lookup during request
initialization and avoiding extra locking requires very confined use
of RCU.  This patch makes cic removal from both ioc and request_queue
perform double-locking and unlink immediately.

* From q side, the change is almost trivial as ioc->lock nests inside
  queue_lock.  It just needs to grab each ioc->lock as it walks
  cic_list and unlink it.

* From ioc side, it's a bit more difficult because of inversed lock
  order.  ioc needs its lock to walk its cic_list but can't grab the
  matching queue_lock and needs to perform unlock-relock dancing.

  Unlinking is now wholly done from put_io_context() and fast path is
  optimized by using the queue_lock the caller already holds, which is
  by far the most common case.  If the ioc accessed multiple devices,
  it tries with trylock.  In unlikely cases of fast path failure, it
  falls back to full double-locking dance from workqueue.

Double-locking isn't the prettiest thing in the world but it's *far*
simpler and more understandable than RCU trick without adding any
meaningful overhead.

This still leaves a lot of now unnecessary RCU logics.  Future patches
will trim them.

-v2: Vivek pointed out that cic->q was being dereferenced after
     cic->release() was called.  Updated to use local variable @this_q
     instead.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      b2efa052
    • Tejun Heo's avatar
      block, cfq: fix cic lookup locking · f1a4f4d3
      Tejun Heo authored 
      * cfq_cic_lookup() may be called without queue_lock and multiple tasks
  can execute it simultaneously for the same shared ioc.  Nothing
  prevents them racing each other and trying to drop the same dead cic
  entry multiple times.

* smp_wmb() in cfq_exit_cic() doesn't really do anything and nothing
  prevents cfq_cic_lookup() seeing stale cic->key.  This usually
  doesn't blow up because by the time cic is exited, all requests have
  been drained and new requests are terminated before going through
  elevator.  However, it can still be triggered by plug merge path
  which doesn't grab queue_lock and thus can't check DEAD state
  reliably.

This patch updates lookup locking such that,

* Lookup is always performed under queue_lock.  This doesn't add any
  more locking.  The only issue is cfq_allow_merge() which can be
  called from plug merge path without holding any lock.  For now, this
  is worked around by using cic of the request to merge into, which is
  guaranteed to have the same ioc.  For longer term, I think it would
  be best to separate out plug merge method from regular one.

* Spurious ioc->lock locking around cic lookup hint assignment
  dropped.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      f1a4f4d3
    • Tejun Heo's avatar
      block, cfq: fix race condition in cic creation path and tighten locking · 216284c3
      Tejun Heo authored 
      cfq_get_io_context() would fail if multiple tasks race to insert cic's
for the same association.  This patch restructures
cfq_get_io_context() such that slow path insertion race is handled
properly.

Note that the restructuring also makes cfq_get_io_context() called
under queue_lock and performs both ioc and cfqd insertions while
holding both ioc and queue locks.  This is part of on-going locking
tightening and will be used to simplify synchronization rules.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      216284c3
    • Tejun Heo's avatar
      block, cfq: move ioc ioprio/cgroup changed handling to cic · dc86900e
      Tejun Heo authored 
      ioprio/cgroup change was handled by marking the changed state in ioc
and, on the following access to the ioc, performing RCU-protected
iteration through all cic's grabbing the matching queue_lock.

This patch moves the changed state to each cic.  When ioprio or cgroup
changes, the respective bit is set on all cic's of the ioc and when
each of those cic (not ioc) is accessed, change is applied for that
specific ioc-queue pair.

This also fixes the following two race conditions between setting and
clearing of changed states.

* Missing barrier between assign/load of ioprio and ioprio_changed
  allowed applying old ioprio.

* Change requests could happen between application of change and
  clearing of changed variables.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      dc86900e
    • Tejun Heo's avatar
      block, cfq: misc updates to cfq_io_context · 283287a5
      Tejun Heo authored 
      Make the following changes to prepare for ioc/cic management cleanup.

* Add cic->q so that ioc can determine the associated queue without
  querying cfq.  This will eventually replace ->key.

* Factor out cfq_release_cic() from cic_free_func().  This function
  assumes that the caller handled locking.

* Rename __cfq_exit_single_io_context() to cfq_exit_cic() and make it
  take only @cic.

* Restructure cfq_cic_link() for future updates.

This patch doesn't introduce any functional changes.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      283287a5
    • Tejun Heo's avatar
      block: misc updates to blk_get_queue() · 09ac46c4
      Tejun Heo authored 
      * blk_get_queue() is peculiar in that it returns 0 on success and 1 on
  failure instead of 0 / -errno or boolean.  Update it such that it
  returns %true on success and %false on failure.

* Make sure the caller checks for the return value.

* Separate out __blk_get_queue() which doesn't check whether @q is
  dead and put it in blk.h.  This will be used later.

This patch doesn't introduce any functional changes.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      09ac46c4
    • Tejun Heo's avatar
      block: make ioc get/put interface more conventional and fix race on alloction · 6e736be7
      Tejun Heo authored 
      Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio().  The former is
always called from local task while the latter can be called from
different task.  The synchornization between them are peculiar and
dubious.

* current_io_context() doesn't grab task_lock() and assumes that if it
  saw %NULL ->io_context, it would stay that way until allocation and
  assignment is complete.  It has smp_wmb() between alloc/init and
  assignment.

* set_task_ioprio() grabs task_lock() for assignment and does
  smp_read_barrier_depends() between "ioc = task->io_context" and "if
  (ioc)".  Unfortunately, this doesn't achieve anything - the latter
  is not a dependent load of the former.  ie, if ioc itself were being
  dereferenced "ioc->xxx", it would mean something (not sure what tho)
  but as the code currently stands, the dependent read barrier is
  noop.

As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.

Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.

ioc get/put doesn't have any reason to be complex.  The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive.  All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.

This patch updates ioc get/put so that it becomes more conventional.

* alloc_io_context() is replaced with get_task_io_context().  This is
  the only interface which can acquire access to ioc of another task.
  On return, the caller has an explicit reference to the object which
  should be put using put_io_context() afterwards.

* The functionality of current_io_context() remains the same but when
  creating a new ioc, it shares the code path with
  get_task_io_context() and always goes through task_lock().

* get_io_context() now means incrementing ref on an ioc which the
  caller already has access to (be that an explicit refcnt or implicit
  %current one).

* PF_EXITING inhibits creation of new io_context and once
  exit_io_context() is finished, it's guaranteed that both ioc
  acquisition functions return %NULL.

* All users are updated.  Most are trivial but
  smp_read_barrier_depends() removal from cfq_get_io_context() needs a
  bit of explanation.  I suppose the original intention was to ensure
  ioc->ioprio is visible when set_task_ioprio() allocates new
  io_context and installs it; however, this wouldn't have worked
  because set_task_ioprio() doesn't have wmb between init and install.
  There are other problems with this which will be fixed in another
  patch.

* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
  specification.

-v2: Vivek spotted contamination from debug patch.  Removed.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      6e736be7
    • Tejun Heo's avatar
      block: misc ioc cleanups · 42ec57a8
      Tejun Heo authored 
      * int return from put_io_context() wasn't used by anybody.  Make it
  return void like other put functions and docbook-fy the function
  comment.

* Reorder dummy declarations for !CONFIG_BLOCK case a bit.

* Make alloc_ioc_context() use __GFP_ZERO allocation, take init out of
  if block and drop 0'ing.

* Docbook-fy current_io_context() comment.

This patch doesn't introduce any functional change.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      42ec57a8
    • Tejun Heo's avatar
      block, cfq: move cfqd->cic_index to q->id · a73f730d
      Tejun Heo authored 
      cfq allocates per-queue id using ida and uses it to index cic radix
tree from io_context.  Move it to q->id and allocate on queue init and
free on queue release.  This simplifies cfq a bit and will allow for
further improvements of io context life-cycle management.

This patch doesn't introduce any functional difference.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      a73f730d
    • Tejun Heo's avatar
      block: add missing blk_queue_dead() checks · 8ba61435
      Tejun Heo authored 
      blk_insert_cloned_request(), blk_execute_rq_nowait() and
blk_flush_plug_list() either didn't check whether the queue was dead
or did it without holding queue_lock.  Update them so that dead state
is checked while holding queue_lock.

AFAICS, this plugs all holes (requeue doesn't matter as the request is
transitioning atomically from in_flight to queued).
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      8ba61435
    • Tejun Heo's avatar
      block: fix drain_all condition in blk_drain_queue() · 481a7d64
      Tejun Heo authored 
      When trying to drain all requests, blk_drain_queue() checked only
q->rq.count[]; however, this only tracks REQ_ALLOCED requests.  This
patch updates blk_drain_queue() such that it looks at all the counters
and queues so that request_queue is actually empty on completion.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      481a7d64
    • Tejun Heo's avatar
      block: add blk_queue_dead() · 34f6055c
      Tejun Heo authored 
      There are a number of QUEUE_FLAG_DEAD tests.  Add blk_queue_dead()
macro and use it.

This patch doesn't introduce any functional difference.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      34f6055c
    • Tejun Heo's avatar
      block, sx8: kill blk_insert_request() · 1ba64ede
      Tejun Heo authored 
      The only user left for blk_insert_request() is sx8 and it can be
trivially switched to use blk_execute_rq_nowait() - special requests
aren't included in io stat and sx8 doesn't use block layer tagging.
Switch sx8 and kill blk_insert_requeset().

This patch doesn't introduce any functional difference.

Only compile tested.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Acked-by: default avatarJeff Garzik <jgarzik@pobox.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      1ba64ede
  3. 09 Dec, 2011 24 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7