The typical XDP memory scheme is one packet per page. Change the AF_XDP
frame size in libbpf to 4096, which is the page size on x86, to allow
libbpf to be used with the drivers with the packet-per-page scheme.

Add a command line option -f to xdpsock to allow to specify a custom
frame size.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Query XDP_OPTIONS in libbpf to determine if the zero-copy mode is active
or not.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Make it possible for the application to determine whether the AF_XDP
socket is running in zero-copy mode. To achieve this, add a new
getsockopt option XDP_OPTIONS that returns flags. The only flag
supported for now is the zero-copy mode indicator.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add a function that checks whether the Fill Ring has the specified
amount of descriptors available. It will be useful for mlx5e that wants
to check in advance, whether it can allocate a bulk of RX descriptors,
to get the best performance.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When an XDP program is set, a full reopen of all channels happens in two
cases:

1. When there was no program set, and a new one is being set.

2. When there was a program set, but it's being unset.

The full reopen is necessary, because the channel parameters may change
if XDP is enabled or disabled. However, it's performed in an unsafe way:
if the new channels fail to open, the old ones are already closed, and
the interface goes down. Use the safe way to switch channels instead.
The same way is already used for other configuration changes.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Since commit 4bfc0bb2 ("bpf: decouple the lifetime of cgroup_bpf
from cgroup itself"), cgroup_bpf release occurs asynchronously
(from a worker context), and before the release of the cgroup itself.

This introduced a previously non-existing race between the release
and update paths. E.g. if a leaf's cgroup_bpf is released and a new
bpf program is attached to the one of ancestor cgroups at the same
time. The race may result in double-free and other memory corruptions.

To fix the problem, let's protect the body of cgroup_bpf_release()
with cgroup_mutex, as it was effectively previously, when all this
code was called from the cgroup release path with cgroup mutex held.

Also let's skip cgroups, which have no chances to invoke a bpf
program, on the update path. If the cgroup bpf refcnt reached 0,
it means that the cgroup is offline (no attached processes), and
there are no associated sockets left. It means there is no point
in updating effective progs array! And it can lead to a leak,
if it happens after the release. So, let's skip such cgroups.

Big thanks for Tejun Heo for discovering and debugging of this problem!

Fixes: 4bfc0bb2 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Fix sparse warning:

net/core/xdp.c:88:6: warning:
 symbol '__mem_id_disconnect' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Currently, each xdp samples are inconsistent in the use.
Most of the samples fetch the interface with it's name.
(ex. xdp1, xdp2skb, xdp_redirect_cpu, xdp_sample_pkts, etc.)

But some of the xdp samples are fetching the interface with
ifindex by command argument.

This commit enables xdp samples to fetch interface with it's name
without changing the original index interface fetching.
(<ifname|ifindex> fetching in the same way as xdp_sample_pkts_user.c does.)
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

With CONFIG_MODULES=n, the following compiler warning occurs:
  /data/users/yhs/work/net-next/kernel/trace/bpf_trace.c:605:13: warning:
      ‘do_bpf_send_signal’ defined but not used [-Wunused-function]
  static void do_bpf_send_signal(struct irq_work *entry)

The __init function send_signal_irq_work_init(), which calls
do_bpf_send_signal(), is defined under CONFIG_MODULES. Hence,
when CONFIG_MODULES=n, nobody calls static function do_bpf_send_signal(),
hence the warning.

The init function send_signal_irq_work_init() should work without
CONFIG_MODULES. Moving it out of CONFIG_MODULES
code section fixed the compiler warning, and also make bpf_send_signal()
helper work without CONFIG_MODULES.

Fixes: 8b401f9e ("bpf: implement bpf_send_signal() helper")
Reported-By: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Non-BPF (user land) part of selftests is built without debug info making
occasional debugging with gdb terrible. Build with debug info always.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

It fixes build error for 32bit caused by type mismatch
size_t/unsigned long.

Fixes: bf829271 ("libbpf: refactor map initialization")
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

XDP_TX is similar to XDP_REDIRECT as it essentially redirects packets to
the device itself. XDP_REDIRECT has bulk transmit mechanism to avoid the
heavy cost of indirect call but it also reduces lock acquisition on the
destination device that needs locks like veth and tun.

XDP_TX does not use indirect calls but drivers which require locks can
benefit from the bulk transmit for XDP_TX as well.

This patch introduces bulk transmit mechanism in veth using bulk queue
on stack, and improves XDP_TX performance by about 9%.

Here are single-core/single-flow XDP_TX test results. CPU consumptions
are taken from "perf report --no-child".

- Before:

  7.26 Mpps

  _raw_spin_lock  7.83%
  veth_xdp_xmit  12.23%

- After:

  7.94 Mpps

  _raw_spin_lock  1.08%
  veth_xdp_xmit   6.10%

v2:
- Use stack for bulk queue instead of a global variable.
Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This is introduced for admins to check what is happening on XDP_TX when
bulk XDP_TX is in use, which will be first introduced in veth in next
commit.

v3:
- Add act field to be in line with other XDP tracepoints.
Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add a test case for veth native XDP. It checks if XDP_PASS, XDP_TX and
XDP_REDIRECT work properly.

  $ cd tools/testing/selftests/bpf
  $ make \
  	TEST_CUSTOM_PROGS= \
  	TEST_GEN_PROGS= \
  	TEST_GEN_PROGS_EXTENDED= \
  	TEST_PROGS_EXTENDED= \
  	TEST_PROGS="test_xdp_veth.sh" \
  	run_tests
  TAP version 13
  1..1
  # selftests: bpf: test_xdp_veth.sh
  # PING 10.1.1.33 (10.1.1.33) 56(84) bytes of data.
  # 64 bytes from 10.1.1.33: icmp_seq=1 ttl=64 time=0.073 ms
  #
  # --- 10.1.1.33 ping statistics ---
  # 1 packets transmitted, 1 received, 0% packet loss, time 0ms
  # rtt min/avg/max/mdev = 0.073/0.073/0.073/0.000 ms
  # selftests: xdp_veth [PASS]
  ok 1 selftests: bpf: test_xdp_veth.sh
Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Fix documentation that mention xdpsock_kern.c which has been
replaced by code embedded in libbpf.
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

There are several spelling mistakes in pr_warning messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

ibumad example was implementing the bpf_debug macro which is exactly the
same as the bpf_printk macro available in bpf_helpers.h. This change
makes use of bpf_printk instead of bpf_debug.
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Wei Wang says:

====================
ipv6: avoid taking refcnt on dst during route lookup

Ipv6 route lookup code always grabs refcnt on the dst for the caller.
But for certain cases, grabbing refcnt is not always necessary if the
call path is rcu protected and the caller does not cache the dst.
Another issue in the route lookup logic is:
When there are multiple custom rules, we have to do the lookup into
each table associated to each rule individually. And when we can't
find the route in one table, we grab and release refcnt on
net->ipv6.ip6_null_entry before going to the next table.
This operation is completely redundant, and causes false issue because
net->ipv6.ip6_null_entry is a shared object.

This patch set introduces a new flag RT6_LOOKUP_F_DST_NOREF for route
lookup callers to set, to avoid any manipulation on the dst refcnt. And
it converts the major input and output path to use it.

The performance gain is noticable.
I ran synflood tests between 2 hosts under the same switch. Both hosts
have 20G mlx NIC, and 8 tx/rx queues.
Sender sends pure SYN flood with random src IPs and ports using trafgen.
Receiver has a simple TCP listener on the target port.
Both hosts have multiple custom rules:
- For incoming packets, only local table is traversed.
- For outgoing packets, 3 tables are traversed to find the route.
The packet processing rate on the receiver is as follows:
- Before the fix: 3.78Mpps
- After the fix:  5.50Mpps

v2->v3:
- Handled fib6_rule_lookup() when CONFIG_IPV6_MULTIPLE_TABLES is not
  configured in patch 03 (suggested by David Ahern)
- Removed the renaming of l3mdev_link_scope_lookup() in patch 05
  (suggested by David Ahern)
- Moved definition of ip6_route_output_flags() from an inline function
  in /net/ipv6/route.c to net/ipv6/route.c in order to address kbuild
  error in patch 05

v1->v2:
- Added a helper ip6_rt_put_flags() in patch 3 suggested by David Miller
====================
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For tx path, in most cases, we still have to take refcnt on the dst
cause the caller is caching the dst somewhere. But it still is
beneficial to make use of RT6_LOOKUP_F_DST_NOREF flag while doing the
route lookup. It is cause this flag prevents manipulating refcnt on
net->ipv6.ip6_null_entry when doing fib6_rule_lookup() to traverse each
routing table. The null_entry is a shared object and constant updates on
it cause false sharing.

We converted the current major lookup function ip6_route_output_flags()
to make use of RT6_LOOKUP_F_DST_NOREF.

Together with the change in the rx path, we see noticable performance
boost:
I ran synflood tests between 2 hosts under the same switch. Both hosts
have 20G mlx NIC, and 8 tx/rx queues.
Sender sends pure SYN flood with random src IPs and ports using trafgen.
Receiver has a simple TCP listener on the target port.
Both hosts have multiple custom rules:
- For incoming packets, only local table is traversed.
- For outgoing packets, 3 tables are traversed to find the route.
The packet processing rate on the receiver is as follows:
- Before the fix: 3.78Mpps
- After the fix:  5.50Mpps
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_route_input() is the key function to do the route lookup in the
rx data path. All the callers to this function are already holding rcu
lock. So it is fairly easy to convert it to not take refcnt on the dst:
We pass in flag RT6_LOOKUP_F_DST_NOREF and do skb_dst_set_noref().
This saves a few atomic inc or dec operations and should boost
performance overall.
This also makes the logic more aligned with v4.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch specifically converts the rule lookup logic to honor this
flag and not release refcnt when traversing each rule and calling
lookup() on each routing table.
Similar to previous patch, we also need some special handling of dst
entries in uncached list because there is always 1 refcnt taken for them
even if RT6_LOOKUP_F_DST_NOREF flag is set.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initialize rt6->rt6i_uncached on the following pre-allocated dsts:
net->ipv6.ip6_null_entry
net->ipv6.ip6_prohibit_entry
net->ipv6.ip6_blk_hole_entry

This is a preparation patch for later commits to be able to distinguish
dst entries in uncached list by doing:
!list_empty(rt6->rt6i_uncached)
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This new flag is to instruct the route lookup function to not take
refcnt on the dst entry. The user which does route lookup with this flag
must properly use rcu protection.
ip6_pol_route() is the major route lookup function for both tx and rx
path.
In this function:
Do not take refcnt on dst if RT6_LOOKUP_F_DST_NOREF flag is set, and
directly return the route entry. The caller should be holding rcu lock
when using this flag, and decide whether to take refcnt or not.

One note on the dst cache in the uncached_list:
As uncached_list does not consume refcnt, one refcnt is always returned
back to the caller even if RT6_LOOKUP_F_DST_NOREF flag is set.
Uncached dst is only possible in the output path. So in such call path,
caller MUST check if the dst is in the uncached_list before assuming
that there is no refcnt taken on the returned dst.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There seems to be some confusion surrounding three PHY interface modes,
specifically 1000BASE-X, 2500BASE-X and SGMII.  Add some documentation
to phylib detailing precisely what these interface modes refer to.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The linux-next commit "inet: fix various use-after-free in defrags
units" [1] introduced compilation warnings,

./include/net/inet_frag.h:117:1: warning: 'inline' is not at beginning
of declaration [-Wold-style-declaration]
 static void inline fqdir_pre_exit(struct fqdir *fqdir)
 ^~~~~~
In file included from ./include/net/netns/ipv4.h:10,
                 from ./include/net/net_namespace.h:20,
                 from ./include/linux/netdevice.h:38,
                 from ./include/linux/icmpv6.h:13,
                 from ./include/linux/ipv6.h:86,
                 from ./include/net/ipv6.h:12,
                 from ./include/rdma/ib_verbs.h:51,
                 from ./include/linux/mlx5/device.h:37,
                 from ./include/linux/mlx5/driver.h:51,
                 from
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:37:

[1] https://lore.kernel.org/netdev/20190618180900.88939-3-edumazet@google.com/Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a no-op that simply moves all locking and unlocking of
->reg_lock into trivial helpers. I did that to be able to easily add
some ad hoc instrumentation to those helpers to get some information
on contention and hold times of the mutex. Perhaps others want to do
something similar at some point, so this frees them from doing the
'sed -i' yoga, and have a much smaller 'git diff' while fiddling.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current code of create_queues_with_size_backoff() allows the ring size
to become as small as ENA_MIN_RING_SIZE/2. This is a bug since we don't
want the queue ring to be smaller than ENA_MIN_RING_SIZE

In this commit we change the loop's termination condition to look at the
queue size of the next iteration instead of that of the current one,
so that the minimal queue size again becomes ENA_MIN_RING_SIZE.

Fixes: eece4d2a ("net: ena: add ethtool function for changing io queue sizes")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently pointer hwdev is dereferenced when assigning hwif before
hwdev is null checked.  Fix this by only derefencing hwdev after the
null check.

Addresses-Coverity: ("Dereference before null check")
Fixes: 4fdc51bb ("hinic: add support for rss parameters with ethtool")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

René van Dorst says:

====================
net: mediatek: Add MT7621 TRGMII mode support

Like many other mediatek SOCs, the MT7621 SOC and the internal MT7530
switch both supports TRGMII mode. MT7621 TRGMII speed is fix 1200MBit.

v1->v2:
 - Fix breakage on non MT7621 SOC
 - Support 25MHz and 40MHz XTAL as MT7530 clocksource
====================
Tested-by: "Frank Wunderlich" <frank-w@public-files.de>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch add support TRGMII mode for MT7621 internal MT7530 switch.
MT7621 TRGMII has only one fix speed mode of 1200MBit.

Also adding support for mt7530 25MHz and 40MHz crystal clocksource.
Values are based on Banana Pi R2 bsp [1].

Don't change MT7623 registers on a MT7621 device.

[1] https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/master/linux-mt/drivers/net/ethernet/mediatek/gsw_mt7623.c#L769Signed-off-by: René van Dorst <opensource@vdorst.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

MT7621 SOC also supports TRGMII.
TRGMII speed is 1200MBit.
Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ops has been iterated to first element when call pre_exit, and
it needs to restore from save_ops, not save ops to save_ops

Fixes: d7d99872 ("netns: add pre_exit method to struct pernet_operations")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When user space sends invalid information in RTA_MULTIPATH, the nexthop
list in ip6_route_multipath_add() is empty and 'rt_notif' is set to
NULL.

The code that emits the in-kernel notifications does not check for this
condition, which results in a NULL pointer dereference [1].

Fix this by bailing earlier in the function if the parsed nexthop list
is empty. This is consistent with the corresponding IPv4 code.

v2:
* Check if parsed nexthop list is empty and bail with extack set

[1]
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 9190 Comm: syz-executor149 Not tainted 5.2.0-rc5+ #38
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:call_fib6_multipath_entry_notifiers+0xd1/0x1a0
net/ipv6/ip6_fib.c:396
Code: 8b b5 30 ff ff ff 48 c7 85 68 ff ff ff 00 00 00 00 48 c7 85 70 ff ff
ff 00 00 00 00 89 45 88 4c 89 e0 48 c1 e8 03 4c 89 65 80 <42> 80 3c 28 00
0f 85 9a 00 00 00 48 b8 00 00 00 00 00 fc ff df 4d
RSP: 0018:ffff88809788f2c0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff11012f11e59 RCX: 00000000ffffffff
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88809788f390 R08: ffff88809788f8c0 R09: 000000000000000c
R10: ffff88809788f5d8 R11: ffff88809788f527 R12: 0000000000000000
R13: dffffc0000000000 R14: ffff88809788f8c0 R15: ffffffff89541d80
FS:  000055555632c880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000080 CR3: 000000009ba7c000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  ip6_route_multipath_add+0xc55/0x1490 net/ipv6/route.c:5094
  inet6_rtm_newroute+0xed/0x180 net/ipv6/route.c:5208
  rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5219
  netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
  rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5237
  netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
  netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
  netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1917
  sock_sendmsg_nosec net/socket.c:646 [inline]
  sock_sendmsg+0xd7/0x130 net/socket.c:665
  ___sys_sendmsg+0x803/0x920 net/socket.c:2286
  __sys_sendmsg+0x105/0x1d0 net/socket.c:2324
  __do_sys_sendmsg net/socket.c:2333 [inline]
  __se_sys_sendmsg net/socket.c:2331 [inline]
  __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2331
  do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4401f9
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc09fd0028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401f9
RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a80
R13: 0000000000401b10 R14: 0000000000000000 R15: 0000000000000000

Reported-by: syzbot+382566d339d52cd1a204@syzkaller.appspotmail.com
Fixes: ebee3cad ("ipv6: Add IPv6 multipath notifications for add / replace")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Yangtao Li <tiny.windzz@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some changes to the TCP fastopen code to make it more robust
against future changes in the choice of key/cookie size, etc.

- Instead of keeping the SipHash key in an untyped u8[] buffer
  and casting it to the right type upon use, use the correct
  type directly. This ensures that the key will appear at the
  correct alignment if we ever change the way these data
  structures are allocated. (Currently, they are only allocated
  via kmalloc so they always appear at the correct alignment)

- Use DIV_ROUND_UP when sizing the u64[] array to hold the
  cookie, so it is always of sufficient size, even if
  TCP_FASTOPEN_COOKIE_MAX is no longer a multiple of 8.

- Drop the 'len' parameter from the tcp_fastopen_reset_cipher()
  function, which is no longer used.

- Add endian swabbing when setting the keys and calculating the hash,
  to ensure that cookie values are the same for a given key and
  source/destination address pair regardless of the endianness of
  the server.

Note that none of these are functional changes wrt the current
state of the code, with the exception of the swabbing, which only
affects big endian systems.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Minor SPDX change conflict.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume
    Nault.

 2) Don't access the DDM interface unless the transceiver implements it
    in bnx2x, from Mauro S. M. Rodrigues.

 3) Don't double fetch 'len' from userspace in sock_getsockopt(), from
    JingYi Hou.

 4) Sign extension overflow in lio_core, from Colin Ian King.

 5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski.

 6) Fix epollout hang in hvsock, from Sunil Muthuswamy.

 7) Fix regression in default fib6_type, from David Ahern.

 8) Handle memory limits in tcp_fragment more appropriately, from Eric
    Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
  tcp: refine memory limit test in tcp_fragment()
  inet: clear num_timeout reqsk_alloc()
  net: mvpp2: debugfs: Add pmap to fs dump
  ipv6: Default fib6_type to RTN_UNICAST when not set
  net: hns3: Fix inconsistent indenting
  net/af_iucv: always register net_device notifier
  net/af_iucv: build proper skbs for HiperTransport
  net/af_iucv: remove GFP_DMA restriction for HiperTransport
  net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()
  hvsock: fix epollout hang from race condition
  net/udp_gso: Allow TX timestamp with UDP GSO
  net: netem: fix use after free and double free with packet corruption
  net: netem: fix backlog accounting for corrupted GSO frames
  net: lio_core: fix potential sign-extension overflow on large shift
  tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb
  ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL
  ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL
  tun: wake up waitqueues after IFF_UP is set
  net: remove duplicate fetch in sock_getsockopt
  tipc: fix issues with early FAILOVER_MSG from peer
  ...

Heiner Kallweit says:

====================
PCI: let pci_disable_link_state propagate errors

Drivers like r8169 rely on pci_disable_link_state() having disabled
certain ASPM link states. If OS can't control ASPM then
pci_disable_link_state() turns into a no-op w/o informing the caller.
The driver therefore may falsely assume the respective ASPM link
states are disabled. Let pci_disable_link_state() propagate errors
to the caller, enabling the caller to react accordingly.

I'd propose to let this series go through the netdev tree if the PCI
core extension is acked by the PCI people.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Certain chip version / board combinations have massive problems if
ASPM is active. If BIOS enables ASPM and doesn't let OS control it,
then we may have a problem with the current code. Therefore check the
return code of pci_disable_link_state() and don't enable ASPM in the
network chip if OS can't control ASPM.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drivers may rely on pci_disable_link_state() having disabled certain
ASPM link states. If OS can't control ASPM then pci_disable_link_state()
turns into a no-op w/o informing the caller. The driver therefore may
falsely assume the respective ASPM link states are disabled.
Let pci_disable_link_state() propagate errors to the caller, enabling
the caller to react accordingly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>