Our ABI for write() uses a s32 for FDs and a u32 for IDRs, but internally
we ended up implicitly casting these ABI values into an 'int'. For ioctl()
we use a s64 for FDs and a u64 for IDRs, again casting to an int.

The various casts to int are all missing range checks which can cause
userspace values that should be considered invalid to be accepted.

Fix this by making the generic lookup routine accept a s64, which does not
truncate the write API's u32/s32 or the ioctl API's s64. Then push the
detailed range checking down to the actual type implementations to be
shared by both interfaces.

Finally, change the copy of the uobj->id to sign extend into a s64, so eg,
if we ever wish to return a negative value for a FD it is carried
properly.

This ensures that userspace values are never weirdly interpreted due to
the various trunctations and everything that is really out of range gets
an EINVAL.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

If the method fails after calling rdma_explicit_destroy (eg if
copy_to_user faults) then it will trigger a kernel oops:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 800000000548d067 P4D 800000000548d067 PUD 54a0067 PMD 0
SMP PTI
CPU: 0 PID: 359 Comm: ibv_rc_pingpong Not tainted 4.18.0-rc1+ #28
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
RIP: 0010:          (null)
Code: Bad RIP value.
RSP: 0018:ffffc900001a3bf0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88000603bd00 RCX: 0000000000000003
RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff88000603bd00
RBP: 0000000000000001 R08: ffffc900001a3cf8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffc900001a3cf0
R13: 0000000000000000 R14: ffffc900001a3cf0 R15: 0000000000000000
FS:  00007fb00dda8700(0000) GS:ffff880007c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000000548e004 CR4: 00000000003606b0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ? rdma_lookup_put_uobject+0x22/0x50 [ib_uverbs]
 ? uverbs_finalize_object+0x3b/0x60 [ib_uverbs]
 ? uverbs_finalize_attrs+0x128/0x140 [ib_uverbs]
 ? ib_uverbs_cmd_verbs+0x698/0x7c0 [ib_uverbs]
 ? find_held_lock+0x2d/0x90
 ? __might_fault+0x39/0x90
 ? ib_uverbs_ioctl+0x111/0x1f0 [ib_uverbs]
 ? do_vfs_ioctl+0xa0/0x6d0
 ? trace_hardirqs_on_caller+0xed/0x180
 ? _raw_spin_unlock_irq+0x24/0x40
 ? syscall_trace_enter+0x138/0x1d0
 ? ksys_ioctl+0x35/0x60
 ? __x64_sys_ioctl+0x11/0x20
 ? do_syscall_64+0x5b/0x1c0
 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe

This is because the type was replaced with the null_type during explicit
destroy that cannot complete the destruction.

One of the side effects of replacing the type is to make the object
handle totally unreachable - so no other command could attempt to use
it, even though it remains on the uboject list.

We can get the same end result by just fully destroying the object inside
rdma_explicit_destroy and leaving the caller the residual kref for the
uobj with no attached HW object, and no presence in the ubojects list.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>

Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Remove a WARN_ON() statement that verifies something that is guaranteed
by the RDMA API, namely that the failed_wr pointer is not touched if an
ib_post_send() call succeeds and that it points at the failed wr if an
ib_post_send() call fails.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Remove two WARN_ON() statements that verify something that is guaranteed
by the RDMA API, namely that the failed_wr pointer is not touched if an
ib_post_send() call succeeds and that it points at the failed wr if an
ib_post_send() call fails.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch does not change the behavior of the modified functions.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

According to "Annex A16: RDMA over Converged Ethernet (RoCE)":

A16.4.3 MANAGEMENT INTERFACES

As defined in the base specification, a special Queue Pair, QP0 is defined
solely for communication between subnet manager(s) and subnet management
agents. Since such an IB-defined subnet management architecture is outside
the scope of this annex, it follows that there is also no requirement that
a port which conforms to this annex be associated with a QP0. Thus, for
end nodes designed to conform to this annex, the concept of QP0 is
undefined and unused for any port connected to an Ethernet network.

CA16-8: A packet arriving at a RoCE port containing a BTH with the
destination QP field set to QP0 shall be silently dropped.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Fix to return a negative error code from the ipoib_neigh_hash_init()
error handling case instead of 0, as done elsewhere in this function.

Fixes: 515ed4f3 ("IB/IPoIB: Separate control and data related initializations")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Expose the mlx5 flow steering parsing trees, exposing the functionality to
user space.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Add support to set a destination that is a flow table, this can come from
the DEVX destination.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Add support to set a public flow steering rule when its destination is a
TIR by using raw specification data.

The logic follows the verbs API but instead of using ib_spec(s) the raw,
device specific, description is used.

This allows supporting specialty matchers without having to define new
matches in the verbs struct based language.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Introduce driver create and destroy flow methods on the uverbs flow
object.

This allows the driver to get its specific device attributes to match the
underlay specification while still using the generic ib_flow object for
cleanup and code sharing.

The IB object's attributes are set via the ib_set_flow() helper function.

The specific implementation for the given specification is added in
downstream patches.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch considers the case that ib_flow is created by some device
driver with its specific parameters using the KABI infrastructure.

In that case both QP and ib_uflow_resources might not be applicable.
Downstream patches from this series use the above functionality.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Introduce flow steering matcher object and its create and destroy methods.

This matcher object holds some mlx5 specific driver properties that
matches the underlay device specification when an mlx5 flow steering group
is created.

It will be used in downstream patches to be part of mlx5 specific create
flow method.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git

This is required to resolve dependencies of the next series of RDMA
patches.

* branch 'mellanox/mlx5-next':
  net/mlx5: Add support for flow table destination number
  net/mlx5: Add forward compatible support for the FTE match data
  net/mlx5: Fix tristate and description for MLX5 module
  net/mlx5: Better return types for CQE API
  net/mlx5: Use ERR_CAST() instead of coding it
  net/mlx5: Add missing SET_DRIVER_VERSION command translation
  net/mlx5: Add XRQ commands definitions
  net/mlx5: Add core support for double vlan push/pop steering action
  net/mlx5: Expose MPEGC (Management PCIe General Configuration) structures
  net/mlx5: FW tracer, add hardware structures
  net/mlx5: fix uaccess beyond "count" in debugfs read/write handlers
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Add support to set a destination from a flow table number.
This functionality will be used in downstream patches from this
series by the DEVX stuff.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Use the PRM size including the reserved when working with the FTE
match data.

This comes to support forward compatibility for cases that current
reserved data will be exposed by the firmware by an application that
uses the DEVX API without changing the kernel.

Also drop some driver checks around the match criteria leaving the work
for firmware to enable forward compatibility for future bits there.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

These constants are used in the ioctl interface so they are part of the
uapi, place them in the correct header for clarity.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>

The e-mail address dgoodell@exch.cisco.com no longer exists. Additionally,
according to https://www.linkedin.com/in/goodell/ Dave is an Amazon
employee since December 2017. Hence remove his Cisco e-mail address from
the usnic maintainer list.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch avoids that gcc reports the following warning when building
with W=1:

drivers/infiniband/hw/bnxt_re/ib_verbs.c:2404:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Remove "uctx" and "pa" variables that were set but not used.

Fixes: a8b92ca1 ("IB/mlx5: Introduce DEVX")
Fixes: 8f062287 ("RDMA/mlx5: Remove debug prints of VMA pointers")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This table by default takes 32KiB which is 3rd memory order. Meanwhile,
this memory is not aimed for DMA operation and could be safely allocated
by vmalloc.
Signed-off-by: Jan Dakinevich <jan.dakinevich@virtuozzo.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Current description did not include new devices. Fix that by proving the
correct generic description.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Reduce sizes of return types.
Use bool for binary indication.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

This makes it more readable that rule is being used to return an err.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

When translating command opcodes to a string, SET_DRIVER_VERSION
command was missing.

Fixes: 42ca502e ('net/mlx5_core: Use a macro in mlx5_command_str()')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Update mlx5 command list and error return function to handle XRQ
commands.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

As newer firmware supports double push/pop in a single FTE, we add
core bits and extend vlan action logic for it.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>