- 25 May, 2018 1 commit
-
-
Inki Dae authored
drivers/gpu/drm/exynos/exynos_drm_scaler.c:402 scaler_task_done() warn: signedness bug returning '(-22)' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
- 24 May, 2018 6 commits
-
-
Marek Szyprowski authored
The default zpos property for all planes in Exynos DRM was fixed as zero. Fix this by providing proper value provided by hardware drivers, which typically matches hardware window number. Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com> Fixes: e47726a1 ("drm/exynos: use generic code for managing zpos plane property") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Marek Szyprowski authored
EPERM is not the correct error value when the driver is not able to get its resources. Change it to ENODEV. Reported-by: Russell King - ARM Linux <linux@armlinux.org.uk> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
DSI driver is not really interested in this interrupt. It causes only unnecessary code execution of interrupt handler and could possibly cause FIFO overflow - as it triggers DSI interrupt handler to process next DSI transfer. With this patch we will get rid of about 30 IRQ handler calls per second. Fixes: e6f988a4 ("drm/exynos: dsi: add support for Exynos5433") Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Marek Szyprowski authored
Enable support for 2 more hardware windows. This require enabling a few more clocks and set proper plane type for all windows. In the new configuration primary plane uses hardware window no 3 and cursor uses window no 5. The remaining hardware windows are used for overlays. This gives us an overlay plane both below and above primary plane for both Decon and DeconTV (which uses hardware window nr 0 for background). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Marek Szyprowski authored
Proper support for Decon's hardware window no 4 and 5 require enabling a few more clocks ("aclk_smmu_decon1x", "aclk_xiu_decon1x", "pclk_smmu_decon1x"). Add those clocks to required clocks list in Decon's dt bindings. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Inki Dae authored
Merge tag 'exynos-drm-next-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next - Add S5PV210 FIMD variant support. - Add IPP v2 framework. . it is a rewritten version of the Exynos mem-to-mem image processing framework which supprts color space conversion, image up/down-scaling and rotation. This new version replaces existing userspace API with new easy-to-use and simple ones so we have already applied the use of these API to real user, Tizen Platform[1], and also makes existing Scaler, FIMC, GScaler and Rotator drivers to use IPP v2 core API. And below are patch lists we have applied to a real user, https://git.tizen.org/cgit/platform/adaptation/samsung_exynos/libtdm-exynos/log/?h=tizen&qt=grep&q=ipp https://git.tizen.org/cgit/platform/adaptation/samsung_exynos/libtdm-exynos/commit/?h=tizen&id=b59be207365d10efd489e6f71c8a045b558c44fe https://git.tizen.org/cgit/platform/kernel/linux-exynos/log/?h=tizen&qt=grep&q=ipp TDM(Tizen Display Manager) is a Display HAL for Tizen platform. Ps. Only real user using IPP API is Tizen. [1] https://www.tizen.org/ - Two cleanups . One is to just remove mode_set callback from MIPI-DSI driver because drm_display_mode data is already available from crtc atomic state. . And other is to just use new return type, vm_fault_t for page fault handler.
-
- 13 May, 2018 1 commit
-
-
Andrzej Hajda authored
The callback was used only to copy provided mode to context for later usage. Since the mode is always available from crtc atomic state this code can be removed. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
- 09 May, 2018 10 commits
-
-
Andrzej Pietrasiewicz authored
Exynos Scaler is a hardware module, which processes graphic data fetched from memory and transfers the resultant dato another memory buffer. Graphics data can be up/down-scaled, rotated, flipped and converted color space. Scaler hardware modules are a part of Exynos5420 and newer Exynos SoCs. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Marek Szyprowski authored
This patch adapts Exynos DRM FIMC driver to new IPP v2 core API. The side effect of this conversion is a switch to driver component API to register properly in the Exynos DRM core. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Merge conflict so merged manually. Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Marek Szyprowski authored
This patch adapts Exynos DRM GScaler driver to new IPP v2 core API. The side effect of this conversion is a switch to driver component API to register properly in the Exynos DRM core. During the conversion driver has been adapted to support more specific compatible strings to distinguish between Exynos5250 and Exynos5420 (different hardware limits). Support for Exynos5433 variant has been added too (different limits table, removed dependency on ARCH_EXYNOS5). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Marek Szyprowski authored
This patch adapts Exynos DRM rotator driver to new IPP v2 core API. The side effect of this conversion is a switch to driver component API to register properly in the Exynos DRM core. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Marek Szyprowski authored
This patch adds Exynos IPP v2 subsystem and userspace API. New userspace API is focused ONLY on memory-to-memory image processing. The two remainging operation modes of obsolete IPP v1 API (framebuffer writeback and local-path output with image processing) can be implemented using standard DRM features: writeback connectors and additional DRM planes with scaling features. V2 IPP userspace API is based on stateless approach, which much better fits to memory-to-memory image processing model. It also provides support for all image formats, which are both already defined in DRM API and supported by the existing IPP hardware modules. The API consists of the following ioctls: - DRM_IOCTL_EXYNOS_IPP_GET_RESOURCES: to enumerate all available image processing modules, - DRM_IOCTL_EXYNOS_IPP_GET_CAPS: to query capabilities and supported image formats of given IPP module, - DRM_IOCTL_EXYNOS_IPP_GET_LIMITS: to query hardware limitiations for selected image format of given IPP module, - DRM_IOCTL_EXYNOS_IPP_COMMIT: to perform operation described by the provided structures (source and destination buffers, operation rectangle, transformation, etc). The proposed userspace API is extensible. In the future more advanced image processing operations can be defined to support for example blending. Userspace API is fully functional also on DRM render nodes, so it is not limited to the root/privileged client. Internal driver API also has been completely rewritten. New IPP core performs all possible input validation, checks and object life-time control. The drivers can focus only on writing configuration to hardware registers. Stateless nature of DRM_IOCTL_EXYNOS_IPP_COMMIT ioctl simplifies the driver API. Minimal driver needs to provide a single callback for starting processing and an array with supported image formats. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Merge conflict so merged manually. Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Paweł Chmiel authored
This patch brings back possibility to use drivers depending on DRM_EXYNOS, on Samsung S5PV210/S5PC110 series based systems. Fixes: dbbc925b ("drm/exynos: depend on ARCH_EXYNOS for DRM_EXYNOS") Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Tomasz Figa authored
This patch adds support for FIMD variant found on S5PV210 SoC. Except CLKSEL bit availability, it is identical to Exynos4210. Tested-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Souptick Joarder authored
Use new return type vm_fault_t for fault handler in struct vm_operations_struct. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Inki Dae authored
Merge tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next Fixup pagefault issue of mixer driver - it makes sure to check shadow register for interlace scan. - it corrects chroma_addr[1], height and vertical position values. And trivial cleanup - it just removes duplicated drm_bridge_attach.
-
Peter Rosin authored
drm_bridge_attach takes care of these assignments, so there is no need to open-code them a second time. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
- 04 May, 2018 3 commits
-
-
Tobias Jakobi authored
If an interlaced video mode is selected, a IOMMU pagefault is triggered by vp_video_buffer(). Fix the most apparent bugs: - pitch value for chroma plane - divide by two of height and vpos of source and destination Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [ a.hajda: Halved also destination height and vpos, updated commit message ] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
In case of interlace mode video processor registers and mixer config register must be check to ensure internal state is in sync with shadow registers. This patch fixes page-faults in interlaced mode. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
Two fixes for now, one for a long standing problem uncovered by a commit in the 4.17 merge window, one for a regression introduced by a previous bugfix, Cc'd stable. * 'vmwgfx-fixes-4.17' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix a buffer object leak drm/vmwgfx: Clean up fbdev modeset locking
-
- 03 May, 2018 2 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
vc4: Fix bo refcounts during async commits (Boris) vga-dac: Fix edid memory leak (Sean) Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Sean Paul <seanpaul@chromium.org> * tag 'drm-misc-fixes-2018-05-02' of git://anongit.freedesktop.org/drm/drm-misc: drm/bridge: vga-dac: Fix edid memory leak drm/vc4: Make sure vc4_bo_{inc,dec}_usecnt() calls are balanced
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2018-05-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Add DMC firmware for Geminilake. * tag 'drm-intel-fixes-2018-05-02' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/glk: Add MODULE_FIRMWARE for Geminilake
-
- 02 May, 2018 1 commit
-
-
Sean Paul authored
edid should be freed once it's finished being used. Fixes: 56fe8b6f ("drm/bridge: Add RGB to VGA bridge support") Cc: Rob Herring <robh@kernel.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: <stable@vger.kernel.org> # v4.9+ Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180420190007.1572-1-seanpaul@chromium.org
-
- 30 Apr, 2018 2 commits
-
-
Boris Brezillon authored
Commit b9f19259 ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl") introduced a mechanism to mark some BOs as purgeable to allow the driver to drop them under memory pressure. In order to implement this feature we had to add a mechanism to mark BOs as currently used by a piece of hardware which materialized through the ->usecnt counter. Plane code is supposed to increment usecnt when it attaches a BO to a plane and decrement it when it's done with this BO, which was done in the ->prepare_fb() and ->cleanup_fb() hooks. The problem is, async page flip logic does not go through the regular atomic update path, and ->prepare_fb() and ->cleanup_fb() are not called in this case. Fix that by manually calling vc4_bo_{inc,dec}_usecnt() in the async-page-flip path. Note that all this should go away as soon as we get generic async page flip support in the core, in the meantime, this fix should do the trick. Fixes: b9f19259 ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl") Reported-by: Peter Robinson <pbrobinson@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180430133232.32457-1-boris.brezillon@bootlin.com Link: https://patchwork.freedesktop.org/patch/msgid/20180430133232.32457-1-boris.brezillon@bootlin.com
-
Ian W MORRISON authored
As the Geminilake firmware is now merged to linux-firmware.git use MODUE_FIRMWARE to load the firmware. This removes the error message in the dmesg log: i915 0000:00:02.0: Direct firmware load for i915/glk_dmc_ver1_04.bin failed with error -2 i915 0000:00:02.0: Failed to load DMC firmware i915/glk_dmc_ver1_04.bin. Disabling runtime power management. i915 0000:00:02.0: DMC firmware homepage: https://01.org/linuxgraphics/downloads/firmware and now shows that the firmware has correctly loaded: [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4) Signed-off-by: Ian W MORRISON <ianwmorrison@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180411044213.383-1-ianwmorrison@gmail.com (cherry picked from commit f6d3e06f) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
- 29 Apr, 2018 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Another set of x86 related updates: - Fix the long broken x32 version of the IPC user space headers which was noticed by Arnd Bergman in course of his ongoing y2038 work. GLIBC seems to have non broken private copies of these headers so this went unnoticed. - Two microcode fixlets which address some more fallout from the recent modifications in that area: - Unconditionally save the microcode patch, which was only saved when CPU_HOTPLUG was enabled causing failures in the late loading mechanism - Make the later loader synchronization finally work under all circumstances. It was exiting early and causing timeout failures due to a missing synchronization point. - Do not use mwait_play_dead() on AMD systems to prevent excessive power consumption as the CPU cannot go into deep power states from there. - Address an annoying sparse warning due to lost type qualifiers of the vmemmap and vmalloc base address constants. - Prevent reserving crash kernel region on Xen PV as this leads to the wrong perception that crash kernels actually work there which is not the case. Xen PV has its own crash mechanism handled by the hypervisor. - Add missing TLB cpuid values to the table to make the printout on certain machines correct. - Enumerate the new CLDEMOTE instruction - Fix an incorrect SPDX identifier - Remove stale macros" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ipc: Fix x32 version of shmid64_ds and msqid64_ds x86/setup: Do not reserve a crash kernel region if booted on Xen PV x86/cpu/intel: Add missing TLB cpuid values x86/smpboot: Don't use mwait_play_dead() on AMD systems x86/mm: Make vmemmap and vmalloc base address constants unsigned long x86/vector: Remove the unused macro FPU_IRQ x86/vector: Remove the macro VECTOR_OFFSET_START x86/cpufeatures: Enumerate cldemote instruction x86/microcode: Do not exit early from __reload_late() x86/microcode/intel: Save microcode patch unconditionally x86/jailhouse: Fix incorrect SPDX identifier
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 pti fixes from Thomas Gleixner: "A set of updates for the x86/pti related code: - Preserve r8-r11 in int $0x80. r8-r11 need to be preserved, but the int$80 entry code removed that quite some time ago. Make it correct again. - A set of fixes for the Global Bit work which went into 4.17 and caused a bunch of interesting regressions: - Triggering a BUG in the page attribute code due to a missing check for early boot stage - Warnings in the page attribute code about holes in the kernel text mapping which are caused by the freeing of the init code. Handle such holes gracefully. - Reduce the amount of kernel memory which is set global to the actual text and do not incidentally overlap with data. - Disable the global bit when RANDSTRUCT is enabled as it partially defeats the hardening. - Make the page protection setup correct for vma->page_prot population again. The adjustment of the protections fell through the crack during the Global bit rework and triggers warnings on machines which do not support certain features, e.g. NX" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64/compat: Preserve r8-r11 in int $0x80 x86/pti: Filter at vma->vm_page_prot population x86/pti: Disallow global kernel text with RANDSTRUCT x86/pti: Reduce amount of kernel text allowed to be Global x86/pti: Fix boot warning from Global-bit setting x86/pti: Fix boot problems from Global-bit setting
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "Two fixes from the timer departement: - Fix a long standing issue in the NOHZ tick code which causes RB tree corruption, delayed timers and other malfunctions. The cause for this is code which modifies the expiry time of an enqueued hrtimer. - Revert the CLOCK_MONOTONIC/CLOCK_BOOTTIME unification due to regression reports. Seems userspace _is_ relying on the documented behaviour despite our hope that it wont" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME tick/sched: Do not mess with an enqueued hrtimer
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "The perf update contains the following bits: x86: - Prevent setting freeze_on_smi on PerfMon V1 CPUs to avoid #GP perf stat: - Keep the '/' event modifier separator in fallback, for example when fallbacking from 'cpu/cpu-cycles/' to user level only, where it should become 'cpu/cpu-cycles/u' and not 'cpu/cpu-cycles/:u' (Jiri Olsa) - Fix PMU events parsing rule, improving error reporting for invalid events (Jiri Olsa) - Disable write_backward and other event attributes for !group events in a group, fixing, for instance this group: '{cycles,msr/aperf/}:S' that has leader sampling (:S) and where just the 'cycles', the leader event, should have the write_backward attribute set, in this case it all fails because the PMU where 'msr/aperf/' lives doesn't accepts write_backward style sampling (Jiri Olsa) - Only fall back group read for leader (Kan Liang) - Fix core PMU alias list for x86 platform (Kan Liang) - Print out hint for mixed PMU group error (Kan Liang) - Fix duplicate PMU name for interval print (Kan Liang) Core: - Set main kernel end address properly when reading kernel and module maps (Namhyung Kim) perf mem: - Fix incorrect entries and add missing man options (Sangwon Hong) s/390: - Remove s390 specific strcmp_cpuid_cmp function (Thomas Richter) - Adapt 'perf test' case record+probe_libc_inet_pton.sh for s390 - Fix s390 undefined record__auxtrace_init() return value in 'perf record' (Thomas Richter)" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Don't enable freeze-on-smi for PerfMon V1 perf stat: Fix duplicate PMU name for interval print perf evsel: Only fall back group read for leader perf stat: Print out hint for mixed PMU group error perf pmu: Fix core PMU alias list for X86 platform perf record: Fix s390 undefined record__auxtrace_init() return value perf mem: Document incorrect and missing options perf evsel: Disable write_backward for leader sampling group events perf pmu: Fix pmu events parsing rule perf stat: Keep the / modifier separator in fallback perf test: Adapt test case record+probe_libc_inet_pton.sh for s390 perf list: Remove s390 specific strcmp_cpuid_cmp function perf machine: Set main kernel end address properly
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Fix misc bugs and a regression for ext4" * tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: add MODULE_SOFTDEP to ensure crc32c is included in the initramfs ext4: fix bitmap position validation ext4: set h_journal if there is a failure starting a reserved handle ext4: prevent right-shifting extents beyond EXT_MAX_BLOCKS
-
- 28 Apr, 2018 6 commits
-
-
Amir Goldstein authored
The comment claims that this helper will try not to loose bits, but for 64bit long it looses the high bits before hashing 64bit long into 32bit int. Use the helper hash_long() to do the right thing for 64bit long. For 32bit long, there is no change. All the callers of end_name_hash() either assign the result to qstr->hash, which is u32 or return the result as an int value (e.g. full_name_hash()). Change the helper return type to int to conform to its users. [ It took me a while to apply this, because my initial reaction to it was - incorrectly - that it could make for slower code. After having looked more at it, I take back all my complaints about the patch, Amir was right and I was mis-reading things or just being stupid. I also don't worry too much about the possible performance impact of this on 64-bit, since most architectures that actually care about performance end up not using this very much (the dcache code is the most performance-critical, but the word-at-a-time case uses its own hashing anyway). So this ends up being mostly used for filesystems that do their own degraded hashing (usually because they want a case-insensitive comparison function). A _tiny_ worry remains, in that not everybody uses DCACHE_WORD_ACCESS, and then this potentially makes things more expensive on 64-bit architectures with slow or lacking multipliers even for the normal case. That said, realistically the only such architecture I can think of is PA-RISC. Nobody really cares about performance on that, it's more of a "look ma, I've got warts^W an odd machine" platform. So the patch is fine, and all my initial worries were just misplaced from not looking at this properly. - Linus ] Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Sterba authored
The AFFS filesystem is still in use by m68k community (Link #2), but as there was no code activity and no maintainer, the filesystem appeared on the list of candidates for staging/removal (Link #1). I volunteer to act as a maintainer of AFFS to collect any fixes that might show up and to guard fs/affs/ against another spring cleaning. Link: https://lkml.kernel.org/r/20180425154602.GA8546@bombadil.infradead.org Link: https://lkml.kernel.org/r/1613268.lKBQxPXt8J@merkaba CC: Martin Steigerwald <martin@lichtvoll.de> CC: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: - two driver fixes - better parameter check for the core - Documentation updates - part of a tree-wide HAS_DMA cleanup * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: sprd: Fix the i2c count issue i2c: sprd: Prevent i2c accesses after suspend is called i2c: dev: prevent ZERO_SIZE_PTR deref in i2cdev_ioctl_rdwr() Documentation/i2c: adopt kernel commenting style in examples Documentation/i2c: sync docs with current state of i2c-tools Documentation/i2c: whitespace cleanup i2c: Remove depends on HAS_DMA in case of platform dependency
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: - crypto API regression that may cause sporadic alloc failures - double-free bug in drbg * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: drbg - set freed buffers to NULL crypto: api - fix finding algorithm currently being tested
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "A few security related fixes for SMB3, most importantly for SMB3.11 encryption" * tag '4.17-rc2-smb3' of git://git.samba.org/sfrench/cifs-2.6: cifs: smbd: Avoid allocating iov on the stack cifs: smbd: Don't use RDMA read/write when signing is used SMB311: Fix reconnect SMB3: Fix 3.11 encryption to Windows and handle encrypted smb3 tcon CIFS: set *resp_buf_type to NO_BUFFER on error
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "A bunch of fixes, mostly for existing code and going to stable. Our memory hot-unplug path wasn't flushing the cache before removing memory. That is a problem now that we are doing memory hotplug on bare metal. Three fixes for the NPU code that supports devices connected via NVLink (ie. GPUs). The main one tweaks the TLB flush algorithm to avoid soft lockups for large flushes. A fix for our memory error handling where we would loop infinitely, returning back to the bad access and hard lockup the CPU. Fixes for the OPAL RTC driver, which wasn't handling some error cases correctly. A fix for a hardlockup in the powernv cpufreq driver. And finally two fixes to our smp_send_stop(), required due to a recent change to use it on shutdown. Thanks to: Alistair Popple, Balbir Singh, Laurentiu Tudor, Mahesh Salgaonkar, Mark Hairgrove, Nicholas Piggin, Rashmica Gupta, Shilpasri G Bhat" * tag 'powerpc-4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kvm/booke: Fix altivec related build break powerpc: Fix deadlock with multiple calls to smp_send_stop cpufreq: powernv: Fix hardlockup due to synchronous smp_call in timer interrupt powerpc: Fix smp_send_stop NMI IPI handling rtc: opal: Fix OPAL RTC driver OPAL_BUSY loops powerpc/mce: Fix a bug where mce loops on memory UE. powerpc/powernv/npu: Do a PID GPU TLB flush when invalidating a large address range powerpc/powernv/npu: Prevent overwriting of pnv_npu2_init_contex() callback parameters powerpc/powernv/npu: Add lock to prevent race in concurrent context init/destroy powerpc/powernv/memtrace: Let the arch hotunplug code flush cache powerpc/mm: Flush cache on memory hot(un)plug
-
- 27 Apr, 2018 2 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "ARM: - PSCI selection API, a leftover from 4.16 (for stable) - Kick vcpu on active interrupt affinity change - Plug a VMID allocation race on oversubscribed systems - Silence debug messages - Update Christoffer's email address (linaro -> arm) x86: - Expose userspace-relevant bits of a newly added feature - Fix TLB flushing on VMX with VPID, but without EPT" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: x86/headers/UAPI: Move DISABLE_EXITS KVM capability bits to the UAPI kvm: apic: Flush TLB after APIC mode/address change if VPIDs are in use arm/arm64: KVM: Add PSCI version selection API KVM: arm/arm64: vgic: Kick new VCPU on interrupt migration arm64: KVM: Demote SVE and LORegion warnings to debug only MAINTAINERS: Update e-mail address for Christoffer Dall KVM: arm/arm64: Close VMID generation race
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "Nothing too bad, but the spectre updates to smatch identified a few places that may need sanitising so we've got those covered. Details: - Close some potential spectre-v1 vulnerabilities found by smatch - Add missing list sentinel for CPUs that don't require KPTI - Removal of unused 'addr' parameter for I/D cache coherency - Removal of redundant set_fs(KERNEL_DS) calls in ptrace - Fix single-stepping state machine handling in response to kernel traps - Clang support for 128-bit integers - Avoid instrumenting our out-of-line atomics in preparation for enabling LSE atomics by default in 4.18" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: avoid instrumenting atomic_ll_sc.o KVM: arm/arm64: vgic: fix possible spectre-v1 in vgic_mmio_read_apr() KVM: arm/arm64: vgic: fix possible spectre-v1 in vgic_get_irq() arm64: fix possible spectre-v1 in ptrace_hbp_get_event() arm64: support __int128 with clang arm64: only advance singlestep for user instruction traps arm64/kernel: rename module_emit_adrp_veneer->module_emit_veneer_for_adrp arm64: ptrace: remove addr_limit manipulation arm64: mm: drop addr parameter from sync icache and dcache arm64: add sentinel to kpti_safe_list
-