On Clevo NH77HJ, NH77HP, and their 15" variants, there is a headset
microphone input attached to 0x19 that does not have a jack detect. In
order to get it working, the pin configuration needs to be set
correctly, and a new ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE fixup is
applied. This is similar to the existing System76 quirk for ALC293, but
for ALC256.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211102172104.10610-1-tcrawford@system76.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

When the timer instance was add into ack_list but was not currently in
process, the user could stop it via snd_timer_stop1() without delete it
from the ack_list. Then the user could free the timer instance and when
it was actually processed UAF occurred.

This issue could be reproduced via testcase snd_timer01 in ltp - running
several instances of that testcase at the same time.

What I actually met was that the ack_list of the timer broken and the
kernel went into deadloop with irqoff. That could be detected by
hardlockup detector on board or when we run it on qemu, we could use gdb
to dump the ack_list when the console has no response.

To fix this issue, we delete the timer instance from ack_list and
active_list unconditionally in snd_timer_stop1().
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211103033517.80531-1-wangwensheng4@huawei.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Audient iD14 (2708:0002) may get a control message error that
interferes the operation e.g. with alsactl.  Add the quirk to ignore
such errors like other devices.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191247
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211102161859.19301-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Apply the PB51ED PCI quirk to the Clevo PC70HS. Fixes audio output from
the internal speakers.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211101162134.5336-1-tcrawford@system76.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v5.16' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.16

This is an unusually large set of updates, mostly a large crop of
unusually big drivers coupled with extensive overhauls of existing code.
There's a SH change here for the DAI format terminology, the change is
straightforward and the SH maintainers don't seem very active.

 - A new version of the audio graph card which supports a wider range of
   systems.
 - Move of the Cirrus DSP framework into drivers/firmware to allow for
   future use by non-audio DSPs.
 - Several conversions to YAML DT bindings.
 - Continuing cleanups to the SOF and Intel code.
 - A very big overhaul of the cs42l42 driver, correcting many problems.
 - Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
   MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
   Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
   RT5682S, and RT9120 and Rockchip RV1126 and RK3568

Adding the Line6 HX-Stomp XL USB_ID as it needs this fixed frequency
quirk as well.

The device is basically just the HX-Stomp with some more buttons on
the face.  I've done some recording with it after adding it, and it
seems to function properly with this fix.  The Midi features appear to
be working as well.

[ a coding style fix and patch reformat by tiwai ]
Signed-off-by: Jason Ormes <skryking@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211030200405.1358678-1-skryking@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add another device ID for JBL Quantum 400. It requires the same quirk as
other JBL Quantum devices.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211030174308.1011825-1-alexander@tsoy.meSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge 5.16-devel branch for upstreaming
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Support multiple headphone drivers in same machine driver. In this
case, both rt5682 and rt5682s are supported and enumerated by different
ACPI HID "10EC5682" and "RTL5682".

V2 Changes:
- remove useless 'NULL', 'false' in if-condition
- can use 'comp_ids' field alone to enumerate driver
- add comma to the end of entry in structure initialization
- keep the table of byt/cht/cml/icl untouched

V3 Changes:
- upstreamd from SOF github, PR#3200
- use new compatiable IDs to shrink the enumerate table of BYT and CHT
- add 'const' to snd_soc_acpi_codecs structures

V4 Changes:
- add signoff to patch 4~6

V5 Changes:
- none, just rebase for patch 3 conflict

Brent Lu (3):
  ASoC: soc-acpi: add comp_ids field for machine driver matching
  ASoC: Intel: sof_rt5682: detect codec variant in probe function
  ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s

Pierre-Louis Bossart (3):
  ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs
  ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs
  ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs

 include/sound/soc-acpi.h                      |  3 +
 sound/soc/intel/boards/sof_rt5682.c           | 34 ++-------
 .../intel/common/soc-acpi-intel-adl-match.c   | 11 ++-
 .../intel/common/soc-acpi-intel-bxt-match.c   |  2 +-
 .../intel/common/soc-acpi-intel-byt-match.c   | 68 +++++++-----------
 .../intel/common/soc-acpi-intel-cht-match.c   | 69 +++++++------------
 .../intel/common/soc-acpi-intel-cml-match.c   |  8 +--
 .../intel/common/soc-acpi-intel-glk-match.c   |  2 +-
 .../intel/common/soc-acpi-intel-jsl-match.c   | 43 ++++--------
 .../intel/common/soc-acpi-intel-kbl-match.c   | 12 ++--
 .../intel/common/soc-acpi-intel-skl-match.c   |  2 +-
 .../intel/common/soc-acpi-intel-tgl-match.c   | 11 ++-
 sound/soc/soc-acpi.c                          | 24 ++++++-
 13 files changed, 119 insertions(+), 170 deletions(-)

--
2.25.1

Merge series "ASoC: Sanity checks and soc-topology updates" from Cezary Rojewski <cezary.rojewski@intel.com>:

Couple of soc-topology related changes and a use-after-free fix. Said fix
and two sanity checks for soc-topology lead the way. While the
use-after-free is quite obvious, the sanity checks are here to cover for
cases where user malformed the topology file -or- access to filesystem
somehow got interrupted during copy operation. We shouldn't be reading
outside the file boundary.

Afterward a change to soc_tplg_add_kcontrol(): device being passed to
soc_tplg_add_dcontrol() from comp->dev to tplg->dev which corrects
dev_xxx() invoked later on.
Also, device used for topology memory allocations from component->dev to
component->card->dev so memory gets freed each time card device (usually
platform device) is removed rather than the component device what may
happen less frequently.

Dummy component gets smarter and no longer overrides hw_params if
there are other components accociated with related struct
snd_soc_pcm_runtime instance.

Amadeusz Sławiński (5):
  ASoC: core: Remove invalid snd_soc_component_set_jack call
  ASoC: topology: Check for dapm widget completeness
  ASoC: topology: Use correct device for prints
  ASoC: topology: Change topology device to card device
  ASoC: Stop dummy from overriding hwparams

Cezary Rojewski (1):
  ASoC: topology: Add header payload_size verification

 sound/soc/soc-core.c     |  3 ---
 sound/soc/soc-topology.c | 34 ++++++++++++++++++++++++++++++----
 sound/soc/soc-utils.c    | 13 +++++++++++++
 3 files changed, 43 insertions(+), 7 deletions(-)

--
2.25.1

If we return before the end of the 'for_each_child_of_node()' iterator, the
reference taken on 'np' must be released.

Add the missing 'of_node_put()' call.

Fixes: c413983e ("ASoC: rsnd: adjust disabled module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/4c0e893cbfa21dc76c1ede0b6f4f8cff42209299.1634586167.git.christophe.jaillet@wanadoo.frSigned-off-by: Mark Brown <broonie@kernel.org>

Up to now aic3x_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.

Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211019074125.3812513-1-u.kleine-koenig@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

'const' qualifiers are missing on some platforms, add as needed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-7-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We have multiple entries for the same codecs, use the new compatible
IDs to have a single entry.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-6-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We have multiple entries for the same codecs, use the new compatible
IDs to have a single entry.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-5-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use comp_ids field to enumerate rt5682/rt5682s headphone codec for
JSL/TGL/ADL devices and remove redundant entries in tables.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-4-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Detect whether the headphone codec is ALC5682I-VS or not in probe
function so we don't need to duplicate all board configs for this new
variant.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-3-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

A machine driver needs to be enumerated by more than one ACPI HID if
it supports second headphone driver (i.e. rt5682 and rt5682s).
However, the id field in snd_soc_acpi_mach structure could contain
only one HID. By adding a 'comp_ids' field which can contain several
HIDs, we can enumerate a machine driver by multiple ACPI HIDs.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-2-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds document for mt8195 board with mt6359, rt1011 and rt5682
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20211020071428.14297-3-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds support for mt8195 board with mt6359, rt1011 and rt5682.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20211020071428.14297-2-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

In case that there are other components assigned to runtime device,
depending on order dummy component can override their params with its
own, which shouldn't happen. Check if there are any other components
assigned to rtd and if so, skip setting hwparams.

Occurs when using topology where 'snd-soc-dummy' gets assigned by
default as codec and platform component.

Alternative approach would be to copy whole dummy handling and rename it
to "snd-soc-null" or something similar. And remove hwparams assignment
to make it really do nothing.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-7-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Topology needs device for prints and resource allocation. So far,
component->dev is used. However, this may lead to high memory use in
model where card is an independent driver which can be reloaded and
topology is loaded from component's probe() method. Every time machine
driver is reloaded topology is being loaded anew, each time allocating
new memory. Said memory will only be freed when component itself is
being freed.

Address the problem by tying topology to component->card->dev instead,
so memory occupied by the topology is freed whenever related machine
device gets removed.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-6-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

soc_tplg_add_dcontrol() passes device as argument which is later used to
print messages. Align it with all other prints in file to use tplg->dev.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-5-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add sanity checks to make sure the data is read within file boundary.
Helps in situations where file is only partially copied or malformed.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-4-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add sanity check to make sure the data is read within file boundary.
Helps in situations where file is only partially copied or malformed.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-3-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

If snd_soc_component_set_jack() is called after
snd_soc_component_remove() it may operate on memory which is freed in
->remove handler.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-2-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

TFA9897 has an internal 'rcv' switch so that it can manage both
loudspeaker and earpiece modes with the same physical speaker.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20211024085840.1536438-3-vincent.knecht@mailoo.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The acp-platform driver now needs the ACPI helpers:

ld.lld: error: undefined symbol: snd_soc_acpi_find_machine
>>> referenced by acp-platform.c
>>>               soc/amd/acp/acp-platform.o:(acp_machine_select) in archive sound/built-in.a

ld.lld: error: undefined symbol: snd_soc_acpi_codec_list
>>> referenced by acp-renoir.c
>>>               soc/amd/acp/acp-renoir.o:(snd_soc_acpi_amd_acp_machines) in archive sound/built-in.a

Other drivers using this interface, select SND_SOC_ACPI, so do the
same thing here.

Fixes: e646b51f ("ASoC: amd: acp: Add callback for machine driver on ACP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211029113714.966823-1-arnd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: cs42l42: Fix definition and handling of jack switch invert" from Richard Fitzgerald <rf@opensource.cirrus.com>:

Summary: The driver applied the opposite of the DT setting to the
wrong register bit.

The jack plug detect hardware in cs42l42 is somewhat confusing,
compounded by an unclear description in the datasheet. This is most
likely the reason that the driver implemented a DT property for the
wrong register bit, that had the opposite effect of what was
described in the binding.

Changing the meaning of the property values isn't feasible; the
driver dates from 2016 and the risk of breaking out-of-tree configs
is too high (the property is also available to ACPI systems).

So the fix is to make the binding doc match the actual behaviour and
then fix the driver to apply it to the correct register bit.

As a bonus, patch #3 converts the binding to yaml.

Richard Fitzgerald (3):
  ASoC: dt-bindings: cs42l42: Correct description of ts-inv
  ASoC: cs42l42: Correct configuring of switch inversion from ts-inv
  ASoC: dt-bindings: cs42l42: Convert binding to yaml

 .../devicetree/bindings/sound/cirrus,cs42l42.yaml  | 225 +++++++++++++++++++++
 .../devicetree/bindings/sound/cs42l42.txt          | 114 -----------
 MAINTAINERS                                        |   1 +
 sound/soc/codecs/cs42l42.c                         |   9 +-
 4 files changed, 230 insertions(+), 119 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml
 delete mode 100644 Documentation/devicetree/bindings/sound/cs42l42.txt

--
2.11.0

Detect the codec variant in probe function and update DAI link
accordingly. Also add an new entry in enumeration table for machine
driver enumeration.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211028140909.496022-1-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When SND_SOC_MT8192_MT6359_RT1015_RT5682,
SND_SOC_MT8192_MT6359_RT1015_RT5682,
SND_SOC_MT8183_DA7219_MAX98357A, or
SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A is selected,
and GPIOLIB is not selected, Kbuild gives the following
warnings, respectively:

WARNING: unmet direct dependencies detected for SND_SOC_DMIC
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
  Selected by [y]:
  - SND_SOC_MT8192_MT6359_RT1015_RT5682 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8192 [=y] && MTK_PMIC_WRAP [=y]

WARNING: unmet direct dependencies detected for SND_SOC_RT1015P
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
  Selected by [y]:
  - SND_SOC_MT8192_MT6359_RT1015_RT5682 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8192 [=y] && MTK_PMIC_WRAP [=y]

WARNING: unmet direct dependencies detected for SND_SOC_RT1015P
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
  Selected by [y]:
  - SND_SOC_MT8183_DA7219_MAX98357A [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_MT8183 [=y] && I2C [=y]

WARNING: unmet direct dependencies detected for SND_SOC_RT1015P
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
  Selected by [y]:
  - SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8183 [=y]

This is because these config options select SND_SOC_RT1015P
without selecting or depending on GPIOLIB, despite
SND_SOC_RT1015P depending on GPIOLIB.

These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20211029001225.27218-1-julianbraha@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The same codec seems to have different personalities. ESSX8316 was
used for Baytrail/CherryTrail, ESSX8336 seems to be used for AppoloLake,
GeminiLake, JasperLake and TigerLake devices.

BugLink: https://github.com/thesofproject/linux/issues/2955
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>-e
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211029011109.23633-1-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The setting from the cirrus,ts-inv property should be applied to the
TIP_SENSE_INV bit, as this is the one that actually affects the jack
detect block. The TS_INV bit only swaps the meaning of the PLUG and
UNPLUG interrupts and should always be 1 for the interrupts to have
the normal meaning.

Due to some misunderstanding the driver had been implemented to
configure the TS_INV bit based on the jack switch polarity. This made
the interrupts behave the correct way around, but left the jack detect
block, button detect and analogue circuits always interpreting an open
switch as unplugged.

The signal chain inside the codec is:

SENSE pin -> TIP_SENSE_INV -> TS_INV -> (invert) -> interrupts
                  |
                  v
             Jack detect,
          button detect and
            analog control

As the TIP_SENSE_INV already performs the necessary inversion the
TS_INV bit never needs to change. It must always be 1 to yield the
expected interrupt behaviour.

Some extra confusion has arisen because of the additional invert in the
interrupt path, meaning that a value applied to the TS_INV bit produces
the opposite effect of applying it to the TIP_SENSE_INV bit. The ts-inv
property has therefore always had the opposite effect to what might be
expected (0 = inverted, 1 = not inverted). To maintain the meaning of
the ts-inv property it must be inverted when applied to TIP_SENSE_INV.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2c394ca7 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/20211028140902.11786-3-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

This swaps the descriptions of the 0 and 1 values to match
what the driver actually does with this property.

The background here is somewhat confusing. The codec has two
invert bits for the tip sense. The DT property should have been
for the TIP_SENSE_INV bit, which is the one that controls the
detect block. Due to some misunderstanding of the hardware the
driver actually implemented setting of the TS_INV bit, which is
only for swapping the sense of the interrupt bits. The description
was taken from the datasheet and refers to TIP_SENSE_INV but
unfortunately TS_INV has a different purpose and the net effect
of changing it is the reverse of what was intended (this is not
clearly described in the datasheet). So the ts-inv settings have
always done the exact opposite of what the description said.

Given the age of the driver, it's too late now to swap the meanings
of the values, so the description is changed to match the behaviour.
They have been annotated with the terminology used in the datasheet
to avoid the confusion of which one corresponds to what the datasheet
calls "inverted tip sense".
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: da16c557 ("ASoC: cs42l42: Add devicetree bindings for CS42L42")
Link: https://lore.kernel.org/r/20211028140902.11786-2-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Now UAPI of ALSA firewire stack got enough functions to interact with
userspace for protocol of MOTU FireWire series. Let's remove the relevant
TODO.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211029012847.11839-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

A user reports functional regression for Mackie Onyx 1640i that the device
generates slow sound with ALSA oxfw driver which supports media clock
recovery. Although the device is based on OXFW971 ASIC, it does not
transfer isochronous packet with own event frequency as expected. The
device seems to adjust event frequency according to events in received
isochronous packets in the beginning of packet streaming. This is
unknown quirk.

This commit fixes the regression to turn the recovery off in driver
side. As a result, nominal frequency is used in duplex packet streaming
between device and driver. For stability of sampling rate in events of
transferred isochronous packet, 4,000 isochronous packets are skipped
in the beginning of packet streaming.

Reference: https://github.com/takaswie/snd-firewire-improve/issues/38
Fixes: 029ffc42 ("ALSA: oxfw: perform sequence replay for media clock recovery")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211028130325.45772-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

Clang warns:

sound/soc/qcom/qdsp6/topology.c:465:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
                default:
                ^
sound/soc/qcom/qdsp6/topology.c:465:3: note: insert 'break;' to avoid fall-through
                default:
                ^
                break;
1 warning generated.

Clang is a little more pedantic than GCC, which permits implicit
fallthroughs to cases that contain just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to fix
the warning.

Link: https://github.com/ClangBuiltLinux/linux/issues/1495Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211027190823.4057382-1-nathan@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

When SND_SOC_AMD_RENOIR_MACH or SND_SOC_AMD_RV_RT5682_MACH
are selected, and GPIOLIB is not selected, Kbuild gives
the following warnings, respectively:

WARNING: unmet direct dependencies detected for SND_SOC_DMIC
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
  Selected by [y]:
  - SND_SOC_AMD_RENOIR_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_RENOIR [=y]

and

WARNING: unmet direct dependencies detected for SND_SOC_MAX98357A
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
  Selected by [y]:
  - SND_SOC_AMD_RV_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP3x [=y] && I2C [=y] && CROS_EC [=y]

This is because SND_SOC_DMIC and SND_SOC_MAX98357A are
selected by SND_SOC_AMD_RV_RT5682_MACH and SND_SOC_AMD_RENOIR_MACH,
respectively. However, neither of the selectors depend on or select GPIOLIB,
despite their selectees depending on GPIOLIB.

These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://lore.kernel.org/r/20211027184835.112916-1-julianbraha@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>