- 17 Aug, 2012 1 commit
-
-
Tiejun Chen authored
Fix some booke wdt ioctls return value error. Signed-off-by:
Tiejun Chen <tiejun.chen@windriver.com> Acked-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
- 10 Aug, 2012 2 commits
-
-
Shengzhou Liu authored
Add the missing usb controller version info and port0, which is required during setup usb phy. Signed-off-by:
Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Zhao Chenhui authored
Signed-off-by:
Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
- 03 Aug, 2012 1 commit
-
-
Jia Hongtao authored
We change fsl_add_bridge to return -ENODEV if the controller is working in agent mode. Then check the return value of fsl_add_bridge to guarantee that only successfully added host bus will be scanned. Signed-off-by:
Jia Hongtao <B38951@freescale.com> Signed-off-by:
Li Yang <leoli@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
- 02 Aug, 2012 17 commits
-
-
Linus Torvalds authored
-
git://dev.laptop.org/users/dilinger/linux-olpcLinus Torvalds authored
Pull OLPC platform updates from Andres Salomon: "These move the OLPC Embedded Controller driver out of arch/x86/platform and into drivers/platform/olpc. OLPC machines are now ARM-based (which means lots of x86 and ARM changes), but are typically pretty self-contained.. so it makes more sense to go through a separate OLPC tree after getting the appropriate review/ACKs." * 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc: x86: OLPC: move s/r-related EC cmds to EC driver Platform: OLPC: move global variables into priv struct Platform: OLPC: move debugfs support from x86 EC driver x86: OLPC: switch over to using new EC driver on x86 Platform: OLPC: add a suspended flag to the EC driver Platform: OLPC: turn EC driver into a platform_driver Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call it drivers: OLPC: update various drivers to include olpc-ec.h Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull arm-soc Marvell Orion device-tree updates from Olof Johansson: "This contains a set of device-tree conversions for Marvell Orion platforms that were staged early but took a few tries to get the branch into a format where it was suitable for us to pick up. Given that most people working on these platforms are hobbyists with limited time, we were a bit more flexible with merging it even though it came in late." * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ... Conflicts: drivers/watchdog/orion_wdt.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull arm-soc cpuidle enablement for OMAP from Olof Johansson: "Coupled cpuidle was meant to merge for 3.5 through Len Brown's tree, but didn't go in because the pull request ended up rejected. So it just got merged, and we got this staged branch that enables the coupled cpuidle code on OMAP. With a stable git workflow from the other maintainer we could have staged this earlier, but that wasn't the case so we have had to merge it late. The alternative is to hold it off until 3.7 but given that the code is well-isolated to OMAP and they are eager to see it go in, I didn't push back hard in that direction." * tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP4: CPUidle: Open broadcast clock-event device. ARM: OMAP4: CPUidle: add synchronization for coupled idle states ARM: OMAP4: CPUidle: Use coupled cpuidle states to implement SMP cpuidle. ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A few fixes for merge window fallout, and a bugfix for timer resume on PRIMA2." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mmp: add missing irqs.h arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes ARM: mxc: Include missing irqs.h header
-
git://github.com/pmundt/linux-shLinus Torvalds authored
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (24 commits) sh: explicitly include sh_dma.h in setup-sh7722.c sh: ecovec: care CN5 VBUS if USB host mode sh: sh7724: fixup renesas_usbhs clock settings sh: intc: initial irqdomain support. sh: pfc: Fix up init ordering mess. serial: sh-sci: fix compilation breakage, when DMA is enabled dmaengine: shdma: restore partial transfer calculation sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757 sh: Fix up recursive fault in oops with unset TTB. sh: pfc: Build fix for pinctrl_remove_gpio_range() changes. sh: select the fixed regulator driver on several boards sh: ecovec: switch MMC power control to regulators sh: add fixed voltage regulators to se7724 sh: add fixed voltage regulators to sdk7786 sh: add fixed voltage regulators to rsk sh: add fixed voltage regulators to migor sh: add fixed voltage regulators to kfr2r09 sh: add fixed voltage regulators to ap325rxa sh: add fixed voltage regulators to sh7757lcr sh: add fixed voltage regulators to sh2007 ...
-
git://neil.brown.name/mdLinus Torvalds authored
Pull additional md update from NeilBrown: "This contains a few patches that depend on plugging changes in the block layer so needed to wait for those. It also contains a Kconfig fix for the new RAID10 support in dm-raid." * tag 'md-3.6' of git://neil.brown.name/md: md/dm-raid: DM_RAID should select MD_RAID10 md/raid1: submit IO from originating thread instead of md thread. raid5: raid5d handle stripe in batch way raid5: make_request use batch stripe release
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull two ceph fixes from Sage Weil: "The first patch fixes up the old crufty open intent code to use the atomic_open stuff properly, and the second fixes a possible null deref and memory leak with the crypto keys." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: fix crypto key null deref, memory leak ceph: simplify+fix atomic_open
-
Linus Torvalds authored
Merge tag 'ecryptfs-3.6-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull ecryptfs fixes from Tyler Hicks: - Fixes a bug when the lower filesystem mount options include 'acl', but the eCryptfs mount options do not - Cleanups in the messaging code - Better handling of empty files in the lower filesystem to improve usability. Failed file creations are now cleaned up and empty lower files are converted into eCryptfs during open(). - The write-through cache changes are being reverted due to bugs that are not easy to fix. Stability outweighs the performance enhancements here. - Improvement to the mount code to catch unsupported ciphers specified in the mount options * tag 'ecryptfs-3.6-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: check for eCryptfs cipher support at mount eCryptfs: Revert to a writethrough cache model eCryptfs: Initialize empty lower files when opening them eCryptfs: Unlink lower inode when ecryptfs_create() fails eCryptfs: Make all miscdev functions use daemon ptr in file private_data eCryptfs: Remove unused messaging declarations and function eCryptfs: Copy up POSIX ACL and read-only flags from lower mount
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS update from Steve French: "Adds SMB2 rmdir/mkdir capability to the SMB2/SMB2.1 support in cifs. I am holding up a few more days on merging the remainder of the SMB2/SMB2.1 enablement although it is nearing review completion, in order to address some review comments from Jeff Layton on a few of the subsequent SMB2 patches, and also to debug an unrelated cifs problem that Pavel discovered." * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Add SMB2 support for rmdir CIFS: Move rmdir code to ops struct CIFS: Add SMB2 support for mkdir operation CIFS: Separate protocol specific part from mkdir CIFS: Simplify cifs_mkdir call
-
Linus Torvalds authored
Borislav Petkov reports that the new warning added in commit 88fdf75d ("mm: warn if pg_data_t isn't initialized with zero") triggers for him, and it is the node_start_pfn field that has already been initialized once. The call trace looks like this: x86_64_start_kernel -> x86_64_start_reservations -> start_kernel -> setup_arch -> paging_init -> zone_sizes_init -> free_area_init_nodes -> free_area_init_node and (with the warning replaced by debug output), Borislav sees On node 0 totalpages: 4193848 DMA zone: 64 pages used for memmap DMA zone: 6 pages reserved DMA zone: 3890 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 798464 pages, LIFO batch:31 Normal zone: 52736 pages used for memmap Normal zone: 3322368 pages, LIFO batch:31 free_area_init_node: pgdat->node_start_pfn: 4423680 <---- On node 1 totalpages: 4194304 Normal zone: 65536 pages used for memmap Normal zone: 4128768 pages, LIFO batch:31 free_area_init_node: pgdat->node_start_pfn: 8617984 <---- On node 2 totalpages: 4194304 Normal zone: 65536 pages used for memmap Normal zone: 4128768 pages, LIFO batch:31 free_area_init_node: pgdat->node_start_pfn: 12812288 <---- On node 3 totalpages: 4194304 Normal zone: 65536 pages used for memmap Normal zone: 4128768 pages, LIFO batch:31 so remove the bogus warning for now to avoid annoying people. Minchan Kim is looking at it. Reported-by:
Borislav Petkov <bp@amd64.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Haojian Zhuang authored
arch/arm/mach-mmp/gplugd.c:195:13: error: ‘MMP_NR_IRQS’ undeclared here (not in a function) make[1]: *** [arch/arm/mach-mmp/gplugd.o] Error 1 Include <mach/irqs.h> to fix this issue. Signed-off-by:
Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Thomas Petazzoni authored
The comment was wrongly referring to Armada 370 while the file is related to Armada XP. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Barry Song authored
The only way to write LATCHED registers to write LATCH_BIT to LATCH register, that will latch COUNTER into LATCHED.e.g. writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); Writing values to LATCHED registers directly is useless at all. Signed-off-by:
Barry Song <Baohua.Song@csr.com> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Sylvain Munaut authored
Avoid crashing if the crypto key payload was NULL, as when it was not correctly allocated and initialized. Also, avoid leaking it. Signed-off-by:
Sylvain Munaut <tnt@246tNt.com> Signed-off-by:
Sage Weil <sage@inktank.com> Reviewed-by:
Alex Elder <elder@inktank.com>
-
Sage Weil authored
The initial ->atomic_open op was carried over from the old intent code, which was incomplete and didn't really work. Replace it with a fresh method. In particular: * always attempt to do an atomic open+lookup, both for the create case and for lookups of existing files. * fix symlink handling by returning 1 to the VFS so that we can follow the link to its destination. This fixes a longstanding ceph bug (#2392). Signed-off-by:
Sage Weil <sage@inktank.com>
-
Guennadi Liakhovetski authored
setup-sh7722.c defines several objects, whose types are defined in sh_dma.h, so, it has to be included explicitly. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
- 01 Aug, 2012 19 commits
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "The lion share of this pull request are fixes for clk-related breakage caused by other changes during this merge window. For some platforms the fix was as simple as selecting HAVE_CLK, for others like the Loongson 2 significant restructuring was required. The remainder are changes required to get the Lantiq code to work again." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Loongson 2: Sort out clock managment. MIPS: Loongson 1: more clk support and add select HAVE_CLK MIPS: txx9: Fix redefinition of clk_* by adding select HAVE_CLK MIPS: BCM63xx: Fix redefinition of clk_* by adding select HAVE_CLK MIPS: AR7: Fix redefinition of clk_* by adding select HAVE_CLK MIPS: Lantiq: Platform specific CLK fixup MIPS: Lantiq: Add device_tree_init function MIPS: Lantiq: Fix interface clock and PCI control register offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML fixes from Richard Weinberger: "This patch set contains mostly fixes and cleanups. The UML tty driver uses now tty_port and is no longer broken like hell :-)" * 'for-linus-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Add arch/x86/um to MAINTAINERS um: pass siginfo to guest process um: fix ubd_file_size for read-only files um: pull interrupt_end() into userspace() um: split syscall_trace(), pass pt_regs to it um: switch UPT_SET_RETURN_VALUE and regs_return_value to pt_regs um: set BLK_CGROUP=y in defconfig um: remove count_lock um: fully use tty_port um: Remove dead code um: remove line_ioctl() TTY: um/line, use tty from tty_port TTY: um/line, add tty_port
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM DMA engine updates from Russell King: "This looks scary at first glance, but what it is is: - a rework of the sa11x0 DMA engine driver merged during the previous cycle, to extract a common set of helper functions for DMA engine implementations. - conversion of amba-pl08x.c to use these helper functions. - addition of OMAP DMA engine driver (using these helper functions), and conversion of some of the OMAP DMA users to use DMA engine. Nothing in the helper functions is ARM specific, so I hope that other implementations can consolidate some of their code by making use of these helpers. This has been sitting in linux-next most of the merge cycle, and has been tested by several OMAP folk. I've tested it on sa11x0 platforms, and given it my best shot on my broken platforms which have the amba-pl08x controller. The last point is the addition to feature-removal-schedule.txt, which will have a merge conflict. Between myself and TI, we're planning to remove the old TI DMA implementation next year." Fix up trivial add/add conflicts in Documentation/feature-removal-schedule.txt and drivers/dma/{Kconfig,Makefile} * 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm: (53 commits) ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine ARM: 7464/1: mmc: omap_hsmmc: ensure probe returns error if DMA channel request fails Add feature removal of old OMAP private DMA implementation mtd: omap2: remove private DMA API implementation mtd: omap2: add DMA engine support spi: omap2-mcspi: remove private DMA API implementation spi: omap2-mcspi: add DMA engine support ARM: omap: remove mmc platform data dma_mask and initialization mmc: omap: remove private DMA API implementation mmc: omap: add DMA engine support mmc: omap_hsmmc: remove private DMA API implementation mmc: omap_hsmmc: add DMA engine support dmaengine: omap: add support for cyclic DMA dmaengine: omap: add support for setting fi dmaengine: omap: add support for returning residue in tx_state method dmaengine: add OMAP DMA engine driver dmaengine: sa11x0-dma: add cyclic DMA support dmaengine: sa11x0-dma: fix DMA residue support dmaengine: PL08x: ensure all descriptors are freed when channel is released dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking ...
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM audit/signal updates from Russell King: "ARM audit/signal handling updates from Al and Will. This improves on the work Viro did last merge window, and sorts out some of the issues found with that work." * 'audit' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7475/1: sys_trace: allow all syscall arguments to be updated via ptrace ARM: 7474/1: get rid of TIF_SYSCALL_RESTARTSYS ARM: 7473/1: deal with handlerless restarts without leaving the kernel ARM: 7472/1: pull all work_pending logics into C function ARM: 7471/1: Revert "7442/1: Revert "remove unused restart trampoline"" ARM: 7470/1: Revert "7443/1: Revert "new way of handling ERESTART_RESTARTBLOCK""
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "This fixes various issues found during July" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7479/1: mm: avoid NULL dereference when flushing gate_vma with VIVT caches ARM: Fix undefined instruction exception handling ARM: 7480/1: only call smp_send_stop() on SMP ARM: 7478/1: errata: extend workaround for erratum #720789 ARM: 7477/1: vfp: Always save VFP state in vfp_pm_suspend on UP ARM: 7476/1: vfp: only clear vfp state for current cpu in vfp_pm_suspend ARM: 7468/1: ftrace: Trace function entry before updating index ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+ ARM: 7466/1: disable interrupt before spinning endlessly ARM: 7465/1: Handle >4GB memory sizes in device tree and mem=size@start option
-
Richard Weinberger authored
Signed-off-by:
Richard Weinberger <richard@nod.at>
-
Martin Pärtel authored
UML guest processes now get correct siginfo_t for SIGTRAP, SIGFPE, SIGILL and SIGBUS. Specifically, si_addr and si_code are now correct where previously they were si_addr = NULL and si_code = 128. Signed-off-by:
Martin Pärtel <martin.partel@gmail.com> Signed-off-by:
Richard Weinberger <richard@nod.at>
-
Martin Pärtel authored
Made ubd_file_size not request write access. Fixes use of read-only images. Signed-off-by:
Martin Pärtel <martin.partel@gmail.com> Signed-off-by:
Richard Weinberger <richard@nod.at>
-
NeilBrown authored
Now that DM_RAID supports raid10, it needs to select that code to ensure it is included. Cc: Jonathan Brassow <jbrassow@redhat.com> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
NeilBrown <neilb@suse.de>
-
NeilBrown authored
queuing writes to the md thread means that all requests go through the one processor which may not be able to keep up with very high request rates. So use the plugging infrastructure to submit all requests on unplug. If a 'schedule' is needed, we fall back on the old approach of handing the requests to the thread for it to handle. Signed-off-by:
NeilBrown <neilb@suse.de>
-
Shaohua Li authored
Let raid5d handle stripe in batch way to reduce conf->device_lock locking. Signed-off-by:
Shaohua Li <shli@fusionio.com> Signed-off-by:
NeilBrown <neilb@suse.de>
-
Shaohua Li authored
make_request() does stripe release for every stripe and the stripe usually has count 1, which makes previous release_stripe() optimization not work. In my test, this release_stripe() becomes the heaviest pleace to take conf->device_lock after previous patches applied. Below patch makes stripe release batch. All the stripes will be released in unplug. The STRIPE_ON_UNPLUG_LIST bit is to protect concurrent access stripe lru. Signed-off-by:
Shaohua Li <shli@fusionio.com> Signed-off-by:
NeilBrown <neilb@suse.de>
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Richard Weinberger <richard@nod.at>
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> [richard@nod.at: Fixed some minor build issues] Signed-off-by:
Richard Weinberger <richard@nod.at>
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Richard Weinberger <richard@nod.at>
-
git://github.com/schandinat/linux-2.6Linus Torvalds authored
Pull fbdev updates from Florian Tobias Schandinat: - large updates for OMAP - support for LCD3 overlay manager (omap5) - omapdss output cleanup - removal of passive matrix LCD support as there are no drivers for such panels for DSS or DSS2 and nobody complained (cleanup) - large updates for SH Mobile - overlay support - separating MERAM (cache) from framebuffer driver - some updates for Exynos and da8xx-fb - various other small patches * tag 'fbdev-updates-for-3.6' of git://github.com/schandinat/linux-2.6: (78 commits) da8xx-fb: fix compile issue due to missing include fbdev: Make pixel_to_pat() failure mode more friendly da8xx-fb: do not turn ON LCD backlight unless LCDC is enabled fbdev: sh_mobile_lcdc: Fix vertical panning step video: exynos mipi dsi: Fix mipi dsi regulators handling issue video: da8xx-fb: do clock reset of revision 2 LCDC before enabling arm: da850: configure LCDC fifo threshold video: da8xx-fb: configure FIFO threshold to reduce underflow errors video: da8xx-fb: fix flicker due to 1 frame delay in updated frame video: da8xx-fb rev2: fix disabling of palette completion interrupt da8xx-fb: add missing FB_BLANK operations video: exynos_dp: use usleep_range instead of delay video: exynos_dp: check the only INTERLANE_ALIGN_DONE bit during Link Training fb: epson1355fb: Fix section mismatch video: exynos_dp: fix wrong DPCD address during Link Training video/smscufx: fix line counting in fb_write aty128fb: Fix coding style issues fbdev: sh_mobile_lcdc: Fix pan offset computation in YUV mode fbdev: sh_mobile_lcdc: Fix overlay registers update during pan operation fbdev: sh_mobile_lcdc: Support horizontal panning ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes that have been found recently. Most of the commits are regression fixes in HD-audio and some other random drivers." * tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: snd-usb: fix clock source validity index ALSA: hda - Fix mute-LED GPIO initialization for IDT codecs ALSA: hda - Add descriptions for missing IDT 92HD83x models ALSA: hda - Fix polarity of mute LED on HP Mini 210 ALSA: es1688 - freeup resources on init failure ALSA: hda - Workaround for silent output on VAIO Z with ALC889 ALSA: hda - Fix WARNING from HDMI/DP parser ALSA: hda - Detach from converter at closing in patch_hdmi.c ALSA: hda - Fix mute-LED GPIO setup for HP Mini 210 ALSA: mpu401: Fix missing initialization of irq field ALSA: hda - Fix invalid D3 of headphone DAC on VT202x codecs
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull second vfs pile from Al Viro: "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the deadlock reproduced by xfstests 068), symlink and hardlink restriction patches, plus assorted cleanups and fixes. Note that another fsfreeze deadlock (emergency thaw one) is *not* dealt with - the series by Fernando conflicts a lot with Jan's, breaks userland ABI (FIFREEZE semantics gets changed) and trades the deadlock for massive vfsmount leak; this is going to be handled next cycle. There probably will be another pull request, but that stuff won't be in it." Fix up trivial conflicts due to unrelated changes next to each other in drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) delousing target_core_file a bit Documentation: Correct s_umount state for freeze_fs/unfreeze_fs fs: Remove old freezing mechanism ext2: Implement freezing btrfs: Convert to new freezing mechanism nilfs2: Convert to new freezing mechanism ntfs: Convert to new freezing mechanism fuse: Convert to new freezing mechanism gfs2: Convert to new freezing mechanism ocfs2: Convert to new freezing mechanism xfs: Convert to new freezing code ext4: Convert to new freezing mechanism fs: Protect write paths by sb_start_write - sb_end_write fs: Skip atime update on frozen filesystem fs: Add freezing handling to mnt_want_write() / mnt_drop_write() fs: Improve filesystem freezing handling switch the protection of percpu_counter list to spinlock nfsd: Push mnt_want_write() outside of i_mutex btrfs: Push mnt_want_write() outside of i_mutex fat: Push mnt_want_write() outside of i_mutex ...
-
Ralf Baechle authored
For unexplainable reasons the Loongson 2 clock API was implemented in a module so fixing this involved shifting large amounts of code around. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-