Provide a unique name for each driver instead of using "line6usb" for
all of them.  This will allow for different configurations based on the
driver type.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

It is unlikely this function would ever be used in a context without a
pointer to a `struct usb_line6_toneport', so grab the device type from
it rather than having the caller do it.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add a predicate for testing if the device supports source selection to
make the conditional logic around this a bit cleaner.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Use the new helper function to create sysfs entries in the card more
gracefully without races.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

For assigning sysfs entries for a card device from the driver,
introduce a new helper function, snd_card_add_dev_attr().  In this
way, we can avoid the possible race between the device registration
and the sysfs addition / removal.

The driver can pass a new attribute group to add freely.  This has to
be called before snd_card_register().

Currently, up to two extra groups can be added.  More than that, it'll
return an error.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Toshiba Satellite S50D laptop with an IDT codec uses the GPIO4 (0x10)
as the master EAPD.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=915858
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v3.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.20

More updates for v3.20:

 - Lots of refactoring from Lars-Peter Clausen, moving drivers to more
   data driven initialization and rationalizing a lot of DAPM usage.
 - Much improved handling of CDCLK clocks on Samsung I2S controllers.
 - Lots of driver specific cleanups and feature improvements.
 - CODEC support for TI PCM514x and TLV320AIC3104 devices.
 - Board support for Tegra systems with Realtek RT5677.

Conflicts:
	sound/soc/intel/sst-mfld-platform-pcm.c

Merge remote-tracking branches 'asoc/topic/wm8960', 'asoc/topic/wm8988' and 'asoc/topic/xtfpga' into asoc-next

Merge remote-tracking branches 'asoc/topic/txx9', 'asoc/topic/wm8750', 'asoc/topic/wm8804' and 'asoc/topic/wm8904' into asoc-next

Merge remote-tracking branches 'asoc/topic/tdm-slot', 'asoc/topic/tegra', 'asoc/topic/tlv320aic3x', 'asoc/topic/ts3a227e' and 'asoc/topic/ts3a277e' into asoc-next

Merge remote-tracking branches 'asoc/topic/rx51', 'asoc/topic/samsung', 'asoc/topic/sh', 'asoc/topic/simple' and 'asoc/topic/sta32x' into asoc-next

Merge remote-tracking branches 'asoc/topic/rockchip', 'asoc/topic/rt5645' and 'asoc/topic/rt5677' into asoc-next

Merge remote-tracking branches 'asoc/topic/omap', 'asoc/topic/pxa' and 'asoc/topic/rcar' into asoc-next

Merge remote-tracking branches 'asoc/topic/fsl-spdif', 'asoc/topic/imx', 'asoc/topic/intel', 'asoc/topic/mxs-saif' and 'asoc/topic/nuc900' into asoc-next

Merge remote-tracking branches 'asoc/topic/doc', 'asoc/topic/dwc', 'asoc/topic/fsi', 'asoc/topic/fsl' and 'asoc/topic/fsl-asrc' into asoc-next

Merge remote-tracking branches 'asoc/topic/cs42l73', 'asoc/topic/dai' and 'asoc/topic/davinci' into asoc-next

Merge remote-tracking branches 'asoc/topic/bt-sco', 'asoc/topic/cs35l32', 'asoc/topic/cs42l52' and 'asoc/topic/cs42l56' into asoc-next

Merge remote-tracking branches 'asoc/topic/ad193x', 'asoc/topic/alc5632', 'asoc/topic/atmel' and 'asoc/topic/au1x' into asoc-next

Merge remote-tracking branches 'asoc/fix/ac97', 'asoc/fix/atmel', 'asoc/fix/intel', 'asoc/fix/rt286', 'asoc/fix/rt5640', 'asoc/fix/sgtl5000', 'asoc/fix/sta32x', 'asoc/fix/tlv320aic3x' and 'asoc/fix/wm8731' into asoc-linus

this patch fixes following sparse warning:
ts3a227e.c:222:5: warning: symbol 'ts3a227e_enable_jack_detect' was not declared. Should it be static?
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Reported by Coverity: CID 1267985 CID 1267986

Fix these two Defects: Uninitialized scalar variable.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The intercon_extra_3104 is obviously for tlv320aic3104.
Reported-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

To quote from section 1.3.1 of the data sheet:
	The SGTL5000 has an internal reset that is deasserted
	8 SYS_MCLK cycles after all power rails have been brought
	up. After this time, communication can start

	...
	1.0us represents 8 SYS_MCLK cycles at the minimum 8.0 MHz SYS_MCLK.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

Disables GPIO support and LINE2 input and renames Mic3 input to Mic2,
if tlv320aic3104 mode is seleced. Devicetree binding document is
updated accordingly.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

line6_start_timer passes an unsigned int as argument to be used in mod_timer
which is then used by mod_timer as unsigned long, this just fixes up the
argument type. This change helps make static code checkers happy.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Instead of calling device_create_file() manually, assign the static
attribute group entries at the device registration.  This simplifies
the error handling and avoids the possible races.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Added entry in sst driver to support rt5645 codec
for intel Braswell platform.
Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current Renesas R-Car sound driver doesn't call
snd_soc_unregiter_component/platform() in .remove.
This patch call these functions.
Reported-by: Nguyen Viet Dung <nv-dung@jinso.co.jp>
Reported-by: Bui Duc Phuc <bd-phuc@jinso.co.jp>
Reported-by: Cao Minh Hiep <cm-hiep@jinso.co.jp>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current Renesas R-Car sound driver is using snd_ctl_xxx()
functions, but it didn't call snd_ctl free_one() / snd_ctl_remove().
This patch call these functions.
Reported-by: Nguyen Viet Dung <nv-dung@jinso.co.jp>
Reported-by: Bui Duc Phuc <bd-phuc@jinso.co.jp>
Reported-by: Cao Minh Hiep <cm-hiep@jinso.co.jp>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

One of the McASP instances in DM646x line of DMSoC only supports DIT mode.
This means that the given IP does not have support for rx and all the rx
related resources are missing, like irq and DMA request.
The driver should not fail if any or all  of the RX resource is missing
when the op_mode is set to DIT mode.
Since RX is not possible in DIT mode, we can just ignore the rx resources
when the McASP is used in DIT mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

On DA830 devices McASP0,1 and 2 shares a single combined interrupt request
line.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>