1. 13 Dec, 2014 2 commits
    • Sagi Grimberg's avatar
      iser-target: Fix flush + disconnect completion handling · 128e9cc8
      Sagi Grimberg authored
      ISER_CONN_UP state is not sufficient to know if
      we should wait for completion of flush errors and
      disconnected_handler event.
      
      Instead, split it to 2 states:
      - ISER_CONN_UP: Got to CM connected phase, This state
      indicates that we need to wait for a CM disconnect
      event before going to teardown.
      
      - ISER_CONN_FULL_FEATURE: Got to full feature phase
      after we posted login response, This state indicates
      that we posted recv buffers and we need to wait for
      flush completions before going to teardown.
      
      Also avoid deffering disconnected handler to a work,
      and handle it within disconnected handler.
      More work here is needed to handle DEVICE_REMOVAL event
      correctly (cleanup all resources).
      
      Squashed:
      
      iser-target: Don't deffer disconnected handler to a work
      Signed-off-by: default avatarSagi Grimberg <sagig@mellanox.com>
      Cc: <stable@vger.kernel.org> # v3.10+
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      128e9cc8
    • Sagi Grimberg's avatar
      iscsi,iser-target: Initiate termination only once · 954f2372
      Sagi Grimberg authored
      Since commit 0fc4ea70 ("Target/iser: Don't put isert_conn inside
      disconnected handler") we put the conn kref in isert_wait_conn, so we
      need .wait_conn to be invoked also in the error path.
      
      Introduce call to isert_conn_terminate (called under lock)
      which transitions the connection state to TERMINATING and calls
      rdma_disconnect. If the state is already teminating, just bail
      out back (temination started).
      
      Also, make sure to destroy the connection when getting a connect
      error event if didn't get to connected (state UP). Same for the
      handling of REJECTED and UNREACHABLE cma events.
      
      Squashed:
      
      iscsi-target: Add call to wait_conn in establishment error flow
      Reported-by: default avatarSlava Shwartsman <valyushash@gmail.com>
      Signed-off-by: default avatarSagi Grimberg <sagig@mellanox.com>
      Cc: <stable@vger.kernel.org> # v3.10+
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      954f2372
  2. 02 Dec, 2014 21 commits
  3. 20 Nov, 2014 1 commit
  4. 03 Nov, 2014 3 commits
  5. 28 Oct, 2014 4 commits
  6. 26 Oct, 2014 4 commits
    • Linus Torvalds's avatar
      Linux 3.18-rc2 · cac7f242
      Linus Torvalds authored
      cac7f242
    • Linus Torvalds's avatar
      Merge tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 88e23761
      Linus Torvalds authored
      Pull ARM SoC fixes from Olof Johansson:
       "Another week, another small batch of fixes.
      
        Most of these make zynq, socfpga and sunxi platforms work a bit
        better:
      
         - due to new requirements for regulators, DWMMC on socfpga broke past
           v3.17
         - SMP spinup fix for socfpga
         - a few DT fixes for zynq
         - another option (FIXED_REGULATOR) for sunxi is needed that used to
           be selected by other options but no longer is.
         - a couple of small DT fixes for at91
         - ...and a couple for i.MX"
      
      * tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        ARM: dts: imx28-evk: Let i2c0 run at 100kHz
        ARM: i.MX6: Fix "emi" clock name typo
        ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP
        ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE
        ARM: dts: socfpga: Add a 3.3V fixed regulator node
        ARM: dts: socfpga: Fix SD card detect
        ARM: dts: socfpga: rename gpio nodes
        ARM: at91/dt: sam9263: fix PLLB frequencies
        power: reset: at91-reset: fix power down register
        MAINTAINERS: add atmel ssc driver maintainer entry
        arm: socfpga: fix fetching cpu1start_addr for SMP
        ARM: zynq: DT: trivial: Fix mc node
        ARM: zynq: DT: Add cadence watchdog node
        ARM: zynq: DT: Add missing reference for memory-controller
        ARM: zynq: DT: Add missing reference for ADC
        ARM: zynq: DT: Add missing address for L2 pl310
        ARM: zynq: DT: Remove 222 MHz OPP
        ARM: zynq: DT: Fix GEM register area size
      88e23761
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · d1e14f1d
      Linus Torvalds authored
      Pull vfs updates from Al Viro:
       "overlayfs merge + leak fix for d_splice_alias() failure exits"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
        overlayfs: embed middle into overlay_readdir_data
        overlayfs: embed root into overlay_readdir_data
        overlayfs: make ovl_cache_entry->name an array instead of pointer
        overlayfs: don't hold ->i_mutex over opening the real directory
        fix inode leaks on d_splice_alias() failure exits
        fs: limit filesystem stacking depth
        overlay: overlay filesystem documentation
        overlayfs: implement show_options
        overlayfs: add statfs support
        overlay filesystem
        shmem: support RENAME_WHITEOUT
        ext4: support RENAME_WHITEOUT
        vfs: add RENAME_WHITEOUT
        vfs: add whiteout support
        vfs: export check_sticky()
        vfs: introduce clone_private_mount()
        vfs: export __inode_permission() to modules
        vfs: export do_splice_direct() to modules
        vfs: add i_op->dentry_open()
      d1e14f1d
    • Olof Johansson's avatar
      Merge tag 'imx-fixes-3.18' of... · efc176a8
      Olof Johansson authored
      Merge tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
      
      Merge "ARM: imx: fixes for 3.18" from Shawn Guo:
      
      The i.MX fixes for 3.18:
       - Revert one patch which increases I2C bus frequency on imx28-evk
       - Fix a typo on imx6q EIM clock name
      
      * tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
        ARM: dts: imx28-evk: Let i2c0 run at 100kHz
        ARM: i.MX6: Fix "emi" clock name typo
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      efc176a8
  7. 25 Oct, 2014 5 commits