- 28 Jul, 2022 23 commits
-
-
Marc Kleine-Budde authored
Vincent Mailhol <mailhol.vincent@wanadoo.fr> says: ==================== This series revolves around ethtool and timestamping. Its ultimate goal is that the timestamping implementation within socketCAN meets the specification of other network drivers in the kernel. This way, tcpdump or other tools derived from libpcap can be used to do timestamping on CAN devices. * Example on a device with hardware timestamp support * Before this series: | # tcpdump -j adapter_unsynced -i can0 | tcpdump: WARNING: When trying to set timestamp type | 'adapter_unsynced' on can0: That type of time stamp is not supported | by that device After applying this series, the warning disappears and tcpdump can be used to get RX hardware timestamps. This series is articulated in three major parts. * Part 1: Add TX software timestamps and report the software timestamping capabilities through ethtool. All the drivers using can_put_echo_skb() already support TX software timestamps. However, the five drivers not using this function (namely can327, janz-ican3, slcan, vcan and vxcan) lack such support. Patch 1 to 4 adds this support. Finally, patch 5 advertises the timesamping capabilities of all drivers which do not support hardware timestamps. * Part 2: add TX hardware timestapms This part is a single patch. In SocketCAN TX hardware is equal to the RX hardware timestamps of the corresponding loopback frame. Reuse the TX hardware timestamp to populate the RX hardware timestamp. While the need of this feature can be debatable, we implement it here so that generic timestamping tools which are agnostic of the specificity of SocketCAN can still obtain the value. For example, tcpdump expects for both TX and RX hardware timestamps to be supported in order to do: | # tcpdump -j adapter_unsynced -i canX * Part 3: report the hardware timestamping capabilities and implement the hardware timestamps ioctls. The kernel documentation specifies in [1] that, for the drivers which support hardware timestamping, SIOCSHWTSTAMP ioctl must be supported and that SIOCGHWTSTAMP ioctl should be supported. Currently, none of the CAN drivers do so. This is a gap. Furthermore, even if not specified, the tools based on libpcap (e.g. tcpdump) also expect ethtool_ops::get_ts_info to be implemented. This last part first adds some generic implementation of net_device_ops::ndo_eth_ioctl and ethtool_ops::get_ts_info which can be used by the drivers with hardware timestamping capabilities. It then uses those generic functions to add ioctl and reporting functionalities to the drivers with hardware timestamping support (namely: mcp251xfd, etas_es58x, kvaser_{pciefd,usb}, peak_{canfd,usb}) [1] Kernel doc: Timestamping, section 3.1 "Hardware Timestamping Implementation: Device Drivers" Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers * Testing * I also developed a tool to test all the different timestamps. For those who would also like to test it, please have a look at: https://lore.kernel.org/linux-can/20220725134345.432367-1-mailhol.vincent@wanadoo.fr/T/ * Changelog * changes since v3: https://lore.kernel.org/all/20220726102454.95096-1-mailhol.vincent@wanadoo.fr * The peak drivers (both PCI and USB) do not support hardware TX timestamps (only RX). Implement specific ioctl and ethtool callback functions for this device. changes since v2: https://lore.kernel.org/all/20220725155354.482986-1-mailhol.vincent@wanadoo.fr * The c_can, flexcan, mcp251xfd and the slcan drivers already declared a struct ethtool_ops. Do not declare again the same structure and instead populate the .get_ts_info() field of the existing structures. changes since v1: https://lore.kernel.org/all/20220725133208.432176-1-mailhol.vincent@wanadoo.fr * First series had a patch to implement ethtool_ops::get_drvinfo. This proved to be useless. This patch was removed and all the clean-up patches made in preparation of that one were moved to a separate series: https://lore.kernel.org/linux-can/20220725153124.467061-1-mailhol.vincent@wanadoo.fr/T/#u ==================== Link: https://lore.kernel.org/all/20220727101641.198847-1-mailhol.vincent@wanadoo.frSigned-off-by:Marc Kleine-Budde <mkl@pengutronix.de>
-
Vincent Mailhol authored
Currently, userland has no method to query which timestamping features are supported by the peak_usb driver (aside maybe of getting RX messages and observe whether or not hardware timestamps stay at zero). The canonical way to add hardware timestamp support is to implement ethtool_ops::get_ts_info() in order to advertise the timestamping capabilities and to implement net_device_ops::ndo_eth_ioctl() as requested in [1]. Currently, the driver only supports hardware RX timestamps [2] but not hardware TX. For this reason, the generic function can_ethtool_op_get_ts_info_hwts() and can_eth_ioctl_hwts() can not be reused and instead this patch adds pcan_get_ts_info() and peak_eth_ioctl(). [1] kernel doc Timestamping, section 3.1: "Hardware Timestamping Implementation: Device Drivers" Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers [2] https://lore.kernel.org/linux-can/20220727080634.l6uttnbrmwbabh3o@pengutronix.de/ CC: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20220727101641.198847-15-mailhol.vincent@wanadoo.frSigned-off-by:
-
Vincent Mailhol authored
Currently, userland has no method to query which timestamping features are supported by the peak_canfd driver (aside maybe of getting RX messages and observe whether or not hardware timestamps stay at zero). The canonical way to add hardware timestamp support is to implement ethtool_ops::get_ts_info() in order to advertise the timestamping capabilities and to implement net_device_ops::ndo_eth_ioctl() as requested in [1]. Currently, the driver only supports hardware RX timestamps [2] but not hardware TX. For this reason, the generic function can_ethtool_op_get_ts_info_hwts() and can_eth_ioctl_hwts() can not be reused and instead this patch adds peak_get_ts_info() and peak_eth_ioctl(). [1] kernel doc Timestamping, section 3.1: "Hardware Timestamping Implementation: Device Drivers" Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers [2] https://lore.kernel.org/linux-can/20220727084257.brcbbf7lksoeekbr@pengutronix.de/ CC: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by:
-
Vincent Mailhol authored
Currently, userland has no method to query which timestamping features are supported by the kvaser_usb driver (aside maybe of getting RX messages and observe whether or not hardware timestamps stay at zero). The canonical way for a network driver to advertise what kind of timestamping it supports is to implement ethtool_ops::get_ts_info(). Here, we use the CAN specific can_ethtool_op_get_ts_info_hwts() function to achieve this. In addition, the driver currently does not support the hardware timestamps ioctls. According to [1], SIOCSHWTSTAMP is "must" and SIOCGHWTSTAMP is "should". This patch fills up that gap by implementing net_device_ops::ndo_eth_ioctl() using the CAN specific function can_eth_ioctl_hwts(). [1] kernel doc Timestamping, section 3.1: "Hardware Timestamping Implementation: Device Drivers" Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers CC: Jimmy Assarsson <extja@kvaser.com> Signed-off-by:
-
Vincent Mailhol authored
Currently, userland has no method to query which timestamping features are supported by the kvaser_pciefd driver (aside maybe of getting RX messages and observe whether or not hardware timestamps stay at zero). The canonical way for a network driver to advertise what kind of timestamping it supports is to implement ethtool_ops::get_ts_info(). Here, we use the CAN specific can_ethtool_op_get_ts_info_hwts() function to achieve this. In addition, the driver currently does not support the hardware timestamps ioctls. According to [1], SIOCSHWTSTAMP is "must" and SIOCGHWTSTAMP is "should". This patch fills up that gap by implementing net_device_ops::ndo_eth_ioctl() using the CAN specific function can_eth_ioctl_hwts(). [1] kernel doc Timestamping, section 3.1: "Hardware Timestamping Implementation: Device Drivers" Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers CC: Jimmy Assarsson <extja@kvaser.com> Signed-off-by:
-
Vincent Mailhol authored
Currently, userland has no method to query which timestamping features are supported by the etas_es58x driver (aside maybe of getting RX messages and observe whether or not hardware timestamps stay at zero). The canonical way for a network driver to advertise what kind of timestamping is supports is to implement ethtool_ops::get_ts_info(). Here, we use the CAN specific can_ethtool_op_get_ts_info_hwts() function to achieve this. In addition, the driver currently does not support the hardware timestamps ioctls. According to [1], SIOCSHWTSTAMP is "must" and SIOCGHWTSTAMP is "should". This patch fills up that gap by implementing net_device_ops::ndo_eth_ioctl() using the CAN specific function can_eth_ioctl_hwts(). [1] kernel doc Timestamping, section 3.1: "Hardware Timestamping Implementation: Device Drivers" Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-driversSigned-off-by:
-
Vincent Mailhol authored
Currently, userland has no methods to query which timestamping features are supported by the mcp251xfd driver (aside maybe of getting RX messages and observe whether or not hardware timestamps stay at zero). The canonical way for a network driver to advertise what kind of timestamping it supports is to implement ethtool_ops::get_ts_info(). Here, we use the CAN specific can_ethtool_op_get_ts_info_hwts() function to achieve this. In addition, the driver currently does not support the hardware timestamps ioctls. According to [1], SIOCSHWTSTAMP is "must" and SIOCGHWTSTAMP is "should". This patch fills up that gap by implementing net_device_ops::ndo_eth_ioctl() using the CAN specific function can_eth_ioctl_hwts(). [1] kernel doc Timestamping, section 3.1: "Hardware Timestamping Implementation: Device Drivers" Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-driversSigned-off-by:
-
Vincent Mailhol authored
Tools based on libpcap (such as tcpdump) expect the SIOCSHWTSTAMP ioctl call to be supported. This is also specified in the kernel doc [1]. The purpose of this ioctl is to toggle the hardware timestamps. Currently, CAN devices which support hardware timestamping have those always activated. can_eth_ioctl_hwts() is a dumb function that will always succeed when requested to set tx_type to HWTSTAMP_TX_ON or rx_filter to HWTSTAMP_FILTER_ALL. [1] Kernel doc: Timestamping, section 3.1 "Hardware Timestamping Implementation: Device Drivers" Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-driversSigned-off-by:
-
Vincent Mailhol authored
Add function can_ethtool_op_get_ts_info_hwts(). This function will be used by CAN devices with hardware TX/RX timestamping support to implement ethtool_ops::get_ts_info. This function does not offer support to activate/deactivate hardware timestamps at device level nor support the filter options (which is currently the case for all CAN devices with hardware timestamping support). The fact that hardware timestamp can not be deactivated at hardware level does not impact the userland. As long as the user do not set SO_TIMESTAMPING using a setsockopt() or ioctl(), the kernel will not emit TX timestamps (RX timestamps will still be reproted as it is the case currently). Drivers which need more fine grained control remains free to implement their own function, but we foresee that the generic function introduced here will be sufficient for the majority. Signed-off-by:
-
Vincent Mailhol authored
Because of the loopback feature of socket CAN, hardware TX timestamps are nothing else than the hardware RX timespamp of the corresponding loopback packet. This patch simply reuses the hardware RX timestamp. The rationale to clone this timestamp value is that existing tools which rely of libpcap (such as tcpdump) expect support for both TX and RX hardware timestamps in order to activate the feature (i.e. no granular control to activate either of TX or RX hardware timestamps). Signed-off-by:
-
Vincent Mailhol authored
Currently, some CAN drivers support hardware timestamping, some do not. But userland has no method to query which features are supported (aside maybe of getting RX messages and observe whether or not hardware timestamps stay at zero). The canonical way for a network driver to advertised what kind of timestamping it supports is to implement ethtool_ops::get_ts_info(). This patch only targets the CAN drivers which *do not* support hardware timestamping. For each of those CAN drivers, implement the get_ts_info() using the generic ethtool_op_get_ts_info(). This way, userland can do: | $ ethtool --show-time-stamping canX to confirm the device timestamping capacities. N.B. the drivers which support hardware timestamping will be migrated in separate patches. Signed-off-by:
-
Vincent Mailhol authored
TX timestamps were added to the can_put_echo_skb() function of can_dev modules in [1]. However, vcan and vxcan do not rely on that function and as such do not offer TX timestamping. While it could be arguable whether TX timestamps are really needed for virtual interfaces, we prefer to still add it so that all CAN drivers, without exception, support the software TX timestamps. Add a call to skb_tx_timestamp() in the vcan_tx() and vxcan_xmit() functions so that the modules now support TX software timestamps. [1] commit 741b91f1 ("can: dev: can_put_echo_skb(): add software tx timestamps") Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=741b91f1b0ea34f00f6a7d4539b767c409291fcfSigned-off-by:
-
Vincent Mailhol authored
TX timestamps were added to the can_put_echo_skb() function of can_dev modules in [1]. However, slcan does not rely on that function and as such does not offer TX timestamping. Add a call to skb_tx_timestamp() in the slc_xmit() function so that the module now supports TX software timestamps. [1] commit 741b91f1 ("can: dev: can_put_echo_skb(): add software tx timestamps") Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=741b91f1b0ea34f00f6a7d4539b767c409291fcf CC: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by:
-
Vincent Mailhol authored
TX timestamps were added to the can_put_echo_skb() function of can_dev modules in [1]. However, janz-ican3 does not rely on that function but instead implements its own echo_skb logic. As such it does not offer TX timestamping. Add a call to skb_tx_timestamp() in the ican3_put_echo_skb() function so that the module now supports TX software timestamps. [1] commit 741b91f1 ("can: dev: can_put_echo_skb(): add software tx timestamps") Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=741b91f1b0ea34f00f6a7d4539b767c409291fcfSigned-off-by:
-
Vincent Mailhol authored
TX timestamps were added to the can_put_echo_skb() function of can_dev modules in [1]. However, can327 does not rely on that function and as such does not offer TX timestamping. Add a call to skb_tx_timestamp() in the can327_netdev_start_xmit() function so that the module now supports TX software timestamps. [1] commit 741b91f1 ("can: dev: can_put_echo_skb(): add software tx timestamps") Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=741b91f1b0ea34f00f6a7d4539b767c409291fcfSigned-off-by:
-
Marc Kleine-Budde authored
Dario Binacchi <dario.binacchi@amarulasolutions.com> says: ==================== With this series I try to finish the task, started with the series [1], of completely removing the dependency of the slcan driver from the userspace slcand/slcan_attach applications. The series also contains patches that remove the legacy stuff (slcan_devs, SLCAN_MAGIC, ...) and do some module cleanup. The series has been created on top of the patches: can: slcan: convert comments to network style comments can: slcan: slcan_init() convert printk(LEVEL ...) to pr_level() can: slcan: fix whitespace issues can: slcan: convert comparison to NULL into !val can: slcan: clean up if/else can: slcan: use scnprintf() as a hardening measure can: slcan: do not report txerr and rxerr during bus-off can: slcan: do not sleep with a spin lock held applied to linux-next. [1] https://lore.kernel.org/all/20220628163137.413025-1-dario.binacchi@amarulasolutions.com Changes since v3: https://lore.kernel.org/all/20220726210217.3368497-1-dario.binacchi@amarulasolutions.com - Add Max Staudt's `Reviewed-by' tag. - Drop the patch "ethtool: add support to get/set CAN bit time register". - Drop the patch "can: slcan: add support to set bit time register (btr)". - Remove the RFC prefix from the series. Changes since v2: https://lore.kernel.org/all/20220725065419.3005015-1-dario.binacchi@amarulasolutions.com - Update the commit message. - Use 1 space in front of the =. - Put the series as RFC again. - Pick up the patch "can: slcan: use KBUILD_MODNAME and define pr_fmt to replace hardcoded names". - Add the patch "ethtool: add support to get/set CAN bit time register" to the series. - Add the patch "can: slcan: add support to set bit time register (btr)" to the series. - Replace the link https://marc.info/?l=linux-can&m=165806705927851&w=2 with https://lore.kernel.org/all/507b5973-d673-4755-3b64-b41cb9a13b6f@hartkopp.net. - Add the `Suggested-by' tag. Changes since RFC: https://lore.kernel.org/all/20220716170007.2020037-1-dario.binacchi@amarulasolutions.com - Re-add headers that export at least one symbol used by the module. - Update the commit description. - Drop the old "slcan" name to use the standard canX interface naming. - Remove comment on listen-only command. - Update the commit subject and description. - Add the patch "MAINTAINERS: Add myself as maintainer of the SLCAN driver" to the series. ==================== mkl: rebased to can-next/master Link: https://lore.kernel.org/all/20220728070254.267974-1-dario.binacchi@amarulasolutions.comSigned-off-by:
-
Dario Binacchi authored
At the suggestion of its author Oliver Hartkopp ([1]), I take over the maintainer-ship and add myself to the authors of the driver. [1] https://lore.kernel.org/all/507b5973-d673-4755-3b64-b41cb9a13b6f@hartkopp.netSuggested-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20220728070254.267974-8-dario.binacchi@amarulasolutions.comSigned-off-by:
-
Dario Binacchi authored
For non-legacy, i.e. ip based configuration, add support for listen-only mode. If listen-only is requested send a listen-only ("L\r") command instead of an open ("O\r") command to the adapter. Signed-off-by: -
Dario Binacchi authored
It is useless to define a custom function that does nothing but always return the same error code. Better to use the generic can_change_mtu() function. Signed-off-by:
-
Dario Binacchi authored
In the driver there are parts of code where the prefix `slc' is used and others where the prefix `slcan' is used instead. The patch replaces every occurrence of `slc' with `slcan', except for the netdev functions where, to avoid compilation conflicts, it was necessary to replace `slc' with `slcan_netdev'. The patch does not make any functional changes. Signed-off-by:
-
Dario Binacchi authored
Taking inspiration from the drivers/net/can/can327.c driver and at the suggestion of its author Max Staudt, I removed legacy stuff like `SLCAN_MAGIC' and `slcan_devs' resulting in simplification of the code and its maintainability. The use of slcan_devs is derived from a very old kernel, since slip.c is about 30 years old, so today's kernel allows us to remove it. The .hangup() ldisc function, which only called the ldisc .close(), has been removed since the ldisc layer calls .close() in a good place anyway. The old slcanX name has been dropped in order to use the standard canX interface naming. The ioctl SIOCGIFNAME can be used to query the name of the created interface. Furthermore, there are several ways to get stable interfaces names in user space, e.g. udev or systemd-networkd. The `maxdev' module parameter has also been removed. CC: Max Staudt <max@enpas.org> Signed-off-by:
Max Staudt <max@enpas.org> Link: https://lore.kernel.org/all/20220728070254.267974-4-dario.binacchi@amarulasolutions.comSigned-off-by:
-
Dario Binacchi authored
Include only the necessary headers. Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "slcan" to populate tty_ldisc_ops::name. KBUILD_MODNAME also evaluates to "slcan". Use KBUILD_MODNAME to get rid on the hardcoded string names. Similarly, the pr_info() and pr_err() hardcoded the "slcan" prefix. Define pr_fmt so that the "slcan" prefix gets automatically added. CC: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by:
-
- 27 Jul, 2022 4 commits
-
-
Marc Kleine-Budde authored
Vincent Mailhol <mailhol.vincent@wanadoo.fr> says: ==================== The c_can, flexcan and slcan use a setter function to populate net_device::ethtool_ops. Using a setter here add one additional function call and add some small bloat in the object file. Exporting the structure allow to remove this setter. The mcp251xfd uses a similar pattern except that it does some additional initialization. As such, this driver is left untouched. * Statistics * For the slcan driver, this patch reduces the object file by 14 bytes (details in the first patch). Although we did not conduct a benchmark for the other drivers but we expect the exact same figures. ==================== Link: https://lore.kernel.org/all/20220727104939.279022-1-mailhol.vincent@wanadoo.frSigned-off-by:
-
Vincent Mailhol authored
The function flexcan_set_ethtool_ops() does one thing: populate net_device::ethtool_ops. Instead, it is possible to directly assign this field and remove one function call and slightly reduce the object size. To do so, export flexcan_ethtool_ops so it becomes visible to flexcan-core.c. Signed-off-by:
-
Vincent Mailhol authored
The function c_can_set_ethtool_ops() does one thing: populate net_device::ethtool_ops. Instead, it is possible to directly assign this field and remove one function call and slightly reduce the object size. To do so, export c_can_ethtool_ops so it becomes visible to c_can_main.c. Signed-off-by:
-
Vincent Mailhol authored
The function slcan_set_ethtool_ops() does one thing: populate net_device::ethtool_ops. Instead, it is possible to directly assign this field and remove one function call and slightly reduce the object size. To do so, export slcan_ethtool_ops so it becomes visible to sclan-core.c. This patch reduces the footprint by 14 bytes: | $ ./scripts/bloat-o-meter drivers/net/can/slcan/slcan.{old,new}.o | drivers/net/can/slcan/slcan.o | add/remove: 0/1 grow/shrink: 1/0 up/down: 15/-29 (-14) | Function old new delta | slcan_open 1010 1025 +15 | slcan_set_ethtool_ops 29 - -29 | Total: Before=11115, After=11101, chg -0.13% Signed-off-by:
-
- 26 Jul, 2022 13 commits
-
-
Marc Kleine-Budde authored
Vincent Mailhol <mailhol.vincent@wanadoo.fr> says: ==================== This is a cleanup series. The patches 1 to 8 get rid of any hardcoded strings and instead relies on the KBUILD_MODNAME macros to get the device name. Patch 9 replaces the ES58X_MODULE_NAME macro with KBUILD_MODNAME in etas_es58x. Finally, also in etas_es58x, patch 10 removes the DRV_VERSION so that the module uses the default behavior and advertise the kernel version instead of a custom version. * Changelog * v1 -> v2: * The patch for esd_usb contained some changes for ems_usb. * v1 assumed that KBUILD_MODNAME could only be used when the file basename and the module had the same name (e.g. vcan.c for the vcan.ko). The fact is that KBUILD_NAME extends to the module name and can thus be used even if the basename is different (e.g. slcan-core.c and slcan.ko) * Add patch #9: can: etas_es58x: replace ES58X_MODULE_NAME with KBUILD_MODNAME v1: https://lore.kernel.org/all/20220725153124.467061-1-mailhol.vincent@wanadoo.fr This series are the first 9 patches of: https://lore.kernel.org/linux-can/20220725133208.432176-1-mailhol.vincent@wanadoo.fr/T/ The initial intent of those 9 patches was to do so cleanup in order to implement ethtool_ops::get_drvinfo but this appeared to be useless: https://lore.kernel.org/linux-can/20220725140911.2djwxfrx3kdmjeuc@pengutronix.de/ Instead, those patch are send as a standalone series. ==================== Drop "[PATCH v2 03/10] can: slcan: use KBUILD_MODNAME and define pr_fmt to replace hardcoded names" to avoid conflicts with Dario Binacchi's work on the slcan driver. Link: https://lore.kernel.org/all/20220726082707.58758-1-mailhol.vincent@wanadoo.frSigned-off-by: -
Vincent Mailhol authored
DRV_VERSION is a leftover from when the driver was an out of tree module. The driver version was never incremented despite of the numerous changes made since it was mainstreamed. Keeping an unmaintained driver version number makes no sense. Remove it and rely on the kernel version instead. Signed-off-by:
-
Vincent Mailhol authored
ES58X_MODULE_NAME is set to "etas_es58x". KBUILD_MODNAME also evaluates to "etas_es58x". Get rid of ES58X_MODULE_NAME and rely on KBUILD_MODNAME instead. Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "usb_8dev" to populate usb_driver::name and can_bittiming_const::name. KBUILD_MODNAME also evaluates to "ubs_8dev". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "kvaser_usb" to populate usb_driver::name. KBUILD_MODNAME also evaluates to "kvaser_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "gs_usb" to populate usb_driver::name, can_bittiming_const::name and can_data_bittiming_const::name. KBUILD_MODNAME evaluates to "gs_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "ems_usb" to populate usb_driver::name. KBUILD_MODNAME also evaluates to "esd_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string names. CC: Frank Jungclaus <frank.jungclaus@esd.eu> Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "softing" to populate platform_driver::name and can_bittiming_const::name. KBUILD_MODNAME also evaluates to "softing". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "ems_usb" to populate usb_driver::name and can_bittiming_const::name. KBUILD_MODNAME also evaluates to "ems_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by:
-
Vincent Mailhol authored
The driver uses the string "can327" to populate tty_ldisc_ops::name. KBUILD_MODNAME also evaluates to "can327". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by:
-
Marc Kleine-Budde authored
The driver uses only 1 TEF and 1 TX ring, but a variable number of RX rings. Fix comment accordingly. Fixes: e0ab3dd5 ("can: mcp251xfd: add dev coredump support") Link: https://lore.kernel.org/all/20220726084328.4042678-1-mkl@pengutronix.deSigned-off-by:
-
Jakub Kicinski authored
Christian Marangi says: ==================== Add MTU change with stmmac interface running This series is to permit MTU change while the interface is running. Major rework are needed to permit to allocate a new dma conf based on the new MTU before applying it. This is to make sure there is enough space to allocate all the DMA queue before releasing the stmmac driver. This was tested with a simple way to stress the network while the interface is running. 2 ssh connection to the device: - One generating simple traffic with while true; do free; done - The other making the mtu change with a delay of 1 second The connection is correctly stopped and recovered after the MTU is changed. The first 2 patch of this series are minor fixup that fix problems presented while testing this. One fix a problem when we renable a queue while we are generating a new dma conf. The other is a corner case that was notice while stressing the driver and turning down the interface while there was some traffic. (this is a follow-up of a simpler patch that wanted to add the same feature. It was suggested to first try to check if it was possible to apply the new configuration. Posting as RFC as it does major rework for the new concept of DMA conf) ==================== Link: https://lore.kernel.org/r/20220723142933.16030-1-ansuelsmth@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Christian Marangi authored
Remove the limitation where the interface needs to be down to change MTU by releasing and opening the stmmac driver to set the new MTU. Also call the set_filter function to correctly init the port. This permits to remove the EBUSY error while the ethernet port is running permitting a correct MTU change if for example a DSA request a MTU change for a switch CPU port. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
