- 24 Mar, 2020 4 commits
-
-
Pawel Dembicki authored
ASKEY WWHC050 is a mcie LTE modem. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1690 ProdID=7588 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=813f0eef6e6e C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution. Signed-off-by:
Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by:
Pawel Dembicki <paweldembicki@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The nci_conn_max_data_pkt_payload_size() function sometimes returns -EPROTO so "max_size" needs to be signed for the error handling to work. We can make "payload_size" an int as well. Fixes: a06347c0 ("NFC: Add Intel Fields Peak NFC solution driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Qian Cai authored
There is a place, inet_dump_fib() fib_table_dump fn_trie_dump_leaf() hlist_for_each_entry_rcu() without rcu_read_lock() will trigger a warning, WARNING: suspicious RCU usage ----------------------------- net/ipv4/fib_trie.c:2216 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/1923: #0: ffffffff8ce76e40 (rtnl_mutex){+.+.}, at: netlink_dump+0xd6/0x840 Call Trace: dump_stack+0xa1/0xea lockdep_rcu_suspicious+0x103/0x10d fn_trie_dump_leaf+0x581/0x590 fib_table_dump+0x15f/0x220 inet_dump_fib+0x4ad/0x5d0 netlink_dump+0x350/0x840 __netlink_dump_start+0x315/0x3e0 rtnetlink_rcv_msg+0x4d1/0x720 netlink_rcv_skb+0xf0/0x220 rtnetlink_rcv+0x15/0x20 netlink_unicast+0x306/0x460 netlink_sendmsg+0x44b/0x770 __sys_sendto+0x259/0x270 __x64_sys_sendto+0x80/0xa0 do_syscall_64+0x69/0xf4 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Fixes: 18a8021a ("net/ipv4: Plumb support for filtering route dumps") Signed-off-by:Qian Cai <cai@lca.pw> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-03-05 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v5.4 ('net/mlx5: DR, Fix postsend actions write length') For -stable v5.5 ('net/mlx5e: kTLS, Fix TCP seq off-by-1 issue in TX resync flow') ('net/mlx5e: Fix endianness handling in pedit mask') ==================== Reviewed-by:Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
- 23 Mar, 2020 1 commit
-
-
Eric Dumazet authored
When application uses TCP_QUEUE_SEQ socket option to change tp->rcv_next, we must also update tp->copied_seq. Otherwise, stuff relying on tcp_inq() being precise can eventually be confused. For example, tcp_zerocopy_receive() might crash because it does not expect tcp_recv_skb() to return NULL. We could add tests in various places to fix the issue, or simply make sure tcp_inq() wont return a random value, and leave fast path as it is. Note that this fixes ioctl(fd, SIOCINQ, &val) at the same time. Fixes: ee995283 ("tcp: Initial repair mode") Fixes: 05255b82 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
- 22 Mar, 2020 13 commits
-
-
Alan Maguire authored
Many systems build/test up-to-date kernels with older libcs, and an older glibc (2.17) lacks the definition of SOL_DCCP in /usr/include/bits/socket.h (it was added in the 4.6 timeframe). Adding the definition to the test program avoids a compilation failure that gets in the way of building tools/testing/selftests/net. The test itself will work once the definition is added; either skipping due to DCCP not being configured in the kernel under test or passing, so there are no other more up-to-date glibc dependencies here it seems beyond that missing definition. Fixes: 11fb60d1 ("selftests: net: reuseport_addr_any: add DCCP") Signed-off-by:
Alan Maguire <alan.maguire@oracle.com> Signed-off-by:
-
Doug Berger authored
The hardware offloading of the NETIF_F_HW_CSUM and NETIF_F_RXCSUM features requires the use of Transmit Status Blocks before transmit frame data and Receive Status Blocks before receive frame data to carry the checksum information. Unfortunately, these status blocks are currently only enabled when the NETIF_F_HW_CSUM feature is enabled. As a result NETIF_F_RXCSUM will not actually be offloaded to the hardware unless both it and NETIF_F_HW_CSUM are enabled. Fortunately, that is the default configuration. This commit addresses this issue by always enabling the use of status blocks on both transmit and receive frames. Further, it replaces the use of a dedicated flag within the driver private data structure with direct use of the netdev features flags. Fixes: 81015539 ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Grygorii Strashko authored
When the DP83867 PHY is strapped to enable Fast Link Drop (FLD) feature STRAP_STS2.STRAP_ FLD (reg 0x006F bit 10), the Energy Lost Threshold for FLD Energy Lost Mode FLD_THR_CFG.ENERGY_LOST_FLD_THR (reg 0x002e bits 2:0) will be defaulted to 0x2. This may cause the phy link to be unstable. The new DP83867 DM recommends to always restore ENERGY_LOST_FLD_THR to 0x1. Hence, restore default value of FLD_THR_CFG.ENERGY_LOST_FLD_THR to 0x1 when FLD is enabled by bootstrapping as recommended by DM. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Emil Renner Berthing authored
Make sure we clean up devicetree related configuration also when clock init fails. Fixes: fecd4d7e ("net: stmmac: dwmac-rk: Add integrated PHY support") Signed-off-by:
Emil Renner Berthing <kernel@esmil.dk> Signed-off-by:
-
Oliver Hartkopp authored
As the description before netdev_run_todo, we cannot call free_netdev before rtnl_unlock, fix it by reorder the code. This patch is a 1:1 copy of upstream slip.c commit f596c870 ("slip: not call free_netdev before rtnl_unlock in slip_open"). Reported-by:
yangerkun <yangerkun@huawei.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Lukas Bulwahn authored
Headers ionic_if.h and ionic_regs.h are licensed under three alternative licenses and the used SPDX-License-Identifier expression makes ./scripts/spdxcheck.py complain: drivers/net/ethernet/pensando/ionic/ionic_if.h: 1:52 Syntax error: OR drivers/net/ethernet/pensando/ionic/ionic_regs.h: 1:52 Syntax error: OR As OR is associative, it is irrelevant if the parentheses are put around the first or the second OR-expression. Simply add parentheses to make spdxcheck.py happy. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Taehee Yoo authored
The port->hsr is used in the hsr_handle_frame(), which is a callback of rx_handler. hsr master and slaves are initialized in hsr_add_port(). This function initializes several pointers, which includes port->hsr after registering rx_handler. So, in the rx_handler routine, un-initialized pointer would be used. In order to fix this, pointers should be initialized before registering rx_handler. Test commands: ip netns del left ip netns del right modprobe -rv veth modprobe -rv hsr killall ping modprobe hsr ip netns add left ip netns add right ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link add veth4 type veth peer name veth5 ip link set veth1 netns left ip link set veth3 netns right ip link set veth4 netns left ip link set veth5 netns right ip link set veth0 up ip link set veth2 up ip link set veth0 address fc:00:00:00:00:01 ip link set veth2 address fc:00:00:00:00:02 ip netns exec left ip link set veth1 up ip netns exec left ip link set veth4 up ip netns exec right ip link set veth3 up ip netns exec right ip link set veth5 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec left ip link add hsr1 type hsr slave1 veth1 slave2 veth4 ip netns exec left ip a a 192.168.100.2/24 dev hsr1 ip netns exec left ip link set hsr1 up ip netns exec left ip n a 192.168.100.1 dev hsr1 lladdr \ fc:00:00:00:00:01 nud permanent ip netns exec left ip n r 192.168.100.1 dev hsr1 lladdr \ fc:00:00:00:00:01 nud permanent for i in {1..100} do ip netns exec left ping 192.168.100.1 & done ip netns exec left hping3 192.168.100.1 -2 --flood & ip netns exec right ip link add hsr2 type hsr slave1 veth3 slave2 veth5 ip netns exec right ip a a 192.168.100.3/24 dev hsr2 ip netns exec right ip link set hsr2 up ip netns exec right ip n a 192.168.100.1 dev hsr2 lladdr \ fc:00:00:00:00:02 nud permanent ip netns exec right ip n r 192.168.100.1 dev hsr2 lladdr \ fc:00:00:00:00:02 nud permanent for i in {1..100} do ip netns exec right ping 192.168.100.1 & done ip netns exec right hping3 192.168.100.1 -2 --flood & while : do ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip link del hsr0 done Splat looks like: [ 120.954938][ C0] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1]I [ 120.957761][ C0] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 120.959064][ C0] CPU: 0 PID: 1511 Comm: hping3 Not tainted 5.6.0-rc5+ #460 [ 120.960054][ C0] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 120.962261][ C0] RIP: 0010:hsr_addr_is_self+0x65/0x2a0 [hsr] [ 120.963149][ C0] Code: 44 24 18 70 73 2f c0 48 c1 eb 03 48 8d 04 13 c7 00 f1 f1 f1 f1 c7 40 04 00 f2 f2 f2 4 [ 120.966277][ C0] RSP: 0018:ffff8880d9c09af0 EFLAGS: 00010206 [ 120.967293][ C0] RAX: 0000000000000006 RBX: 1ffff1101b38135f RCX: 0000000000000000 [ 120.968516][ C0] RDX: dffffc0000000000 RSI: ffff8880d17cb208 RDI: 0000000000000000 [ 120.969718][ C0] RBP: 0000000000000030 R08: ffffed101b3c0e3c R09: 0000000000000001 [ 120.972203][ C0] R10: 0000000000000001 R11: ffffed101b3c0e3b R12: 0000000000000000 [ 120.973379][ C0] R13: ffff8880aaf80100 R14: ffff8880aaf800f2 R15: ffff8880aaf80040 [ 120.974410][ C0] FS: 00007f58e693f740(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 120.979794][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 120.980773][ C0] CR2: 00007ffcb8b38f29 CR3: 00000000afe8e001 CR4: 00000000000606f0 [ 120.981945][ C0] Call Trace: [ 120.982411][ C0] <IRQ> [ 120.982848][ C0] ? hsr_add_node+0x8c0/0x8c0 [hsr] [ 120.983522][ C0] ? rcu_read_lock_held+0x90/0xa0 [ 120.984159][ C0] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 120.984944][ C0] hsr_handle_frame+0x1db/0x4e0 [hsr] [ 120.985597][ C0] ? hsr_nl_nodedown+0x2b0/0x2b0 [hsr] [ 120.986289][ C0] __netif_receive_skb_core+0x6bf/0x3170 [ 120.992513][ C0] ? check_chain_key+0x236/0x5d0 [ 120.993223][ C0] ? do_xdp_generic+0x1460/0x1460 [ 120.993875][ C0] ? register_lock_class+0x14d0/0x14d0 [ 120.994609][ C0] ? __netif_receive_skb_one_core+0x8d/0x160 [ 120.995377][ C0] __netif_receive_skb_one_core+0x8d/0x160 [ 120.996204][ C0] ? __netif_receive_skb_core+0x3170/0x3170 [ ... ] Reported-by: syzbot+fcf5dd39282ceb27108d@syzkaller.appspotmail.com Fixes: c5a75911 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by:Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
David S. Miller authored
Luo bin says: ==================== hinic: BugFixes Fix a number of bugs which have been present since the first commit. The bugs fixed in these patchs are hardly exposed unless given very specific conditions. ==================== Signed-off-by: -
Luo bin authored
the minimum value of skb len that hw supports is 32 rather than 17 Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
Luo bin authored
the second input parameter of wait_for_completion_timeout should be jiffies instead of millisecond Signed-off-by:
-
Luo bin authored
add read barrier in driver code to keep from reading other fileds in dma memory which is writable for hw until we have verified the memory is valid for driver Signed-off-by:
-
Luo bin authored
should disable eq irq before freeing it, must clear event queue depth in hw before freeing relevant memory to avoid illegal memory access and update consumer idx to avoid invalid interrupt Signed-off-by:
-
Luo bin authored
it's unreliable for fw to check whether IO is stopped, so driver wait for enough time to ensure IO process is done in hw before freeing resources Signed-off-by:
-
- 21 Mar, 2020 2 commits
-
-
Florian Westphal authored
In rare cases retransmit logic will make a full skb copy, which will not trigger the zeroing added in recent change b738a185 ("tcp: ensure skb->dev is NULL before leaving TCP stack"). Cc: Eric Dumazet <edumazet@google.com> Fixes: 75c119af ("tcp: implement rb-tree based retransmit queue") Fixes: 28f8bfd1 ("netfilter: Support iif matches in POSTROUTING") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Refetch IP header pointer after pskb_may_pull() in flowtable, from Haishuang Yan. 2) Fix memleak in flowtable offload in nf_flow_table_free(), from Paul Blakey. 3) Set control.addr_type mask in flowtable offload, from Edward Cree. ==================== Signed-off-by:
-
- 20 Mar, 2020 6 commits
-
-
Eric Dumazet authored
skb->rbnode is sharing three skb fields : next, prev, dev When a packet is sent, TCP keeps the original skb (master) in a rtx queue, which was converted to rbtree a while back. __tcp_transmit_skb() is responsible to clone the master skb, and add the TCP header to the clone before sending it to network layer. skb_clone() already clears skb->next and skb->prev, but copies the master oskb->dev into the clone. We need to clear skb->dev, otherwise lower layers could interpret the value as a pointer to a netdev. This old bug surfaced recently when commit 28f8bfd1 ("netfilter: Support iif matches in POSTROUTING") was merged. Before this netfilter commit, skb->dev value was ignored and changed before reaching dev_queue_xmit() Fixes: 75c119af ("tcp: implement rb-tree based retransmit queue") Fixes: 28f8bfd1 ("netfilter: Support iif matches in POSTROUTING") Signed-off-by:
Martin Zaharinov <micron10@gmail.com> Cc: Florian Westphal <fw@strlen.de> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Rahul Lakkireddy authored
Driver reclaims descriptors in much smaller batches, even if hardware indicates more to reclaim, during backpressure. So, fix the check to restart the Txq during backpressure, by looking at how many descriptors hardware had indicated to reclaim, and not on how many descriptors that driver had actually reclaimed. Once the Txq is restarted, driver will reclaim even more descriptors when Tx path is entered again. Fixes: d429005f ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
-
Rahul Lakkireddy authored
commit 7c3bebc3 ("cxgb4: request the TX CIDX updates to status page") reverted back to getting Tx CIDX updates via DMA, instead of interrupts, introduced by commit d429005f ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") However, it missed reverting back several code changes where Tx CIDX updates are not explicitly requested during backpressure when using interrupt mode. These missed changes cause slow recovery during backpressure because the corresponding interrupt no longer comes and hence results in Tx throughput drop. So, revert back these missed code changes, as well, which will allow explicitly requesting Tx CIDX updates when backpressure happens. This enables the corresponding interrupt with Tx CIDX update message to get generated and hence speed up recovery and restore back throughput. Fixes: 7c3bebc3 ("cxgb4: request the TX CIDX updates to status page") Fixes: d429005f ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by:
-
René van Dorst authored
Andrew reported: After a number of network port link up/down changes, sometimes the switch port gets stuck in a state where it thinks it is still transmitting packets but the cpu port is not actually transmitting anymore. In this state you will see a message on the console "mtk_soc_eth 1e100000.ethernet eth0: transmit timed out" and the Tx counter in ifconfig will be incrementing on virtual port, but not incrementing on cpu port. The issue is that MAC TX/RX status has no impact on the link status or queue manager of the switch. So the queue manager just queues up packets of a disabled port and sends out pause frames when the queue is full. Change the LINK bit to reflect the link status. Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Reported-by:
Andrew Smith <andrew.smith@digi.com> Signed-off-by:
René van Dorst <opensource@vdorst.com> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc, afs: Interruptibility fixes Here are a number of fixes for AF_RXRPC and AFS that make AFS system calls less interruptible and so less likely to leave the filesystem in an uncertain state. There's also a miscellaneous patch to make tracing consistent. (1) Firstly, abstract out the Tx space calculation in sendmsg. Much the same code is replicated in a number of places that subsequent patches are going to alter, including adding another copy. (2) Fix Tx interruptibility by allowing a kernel service, such as AFS, to request that a call be interruptible only when waiting for a call slot to become available (ie. the call has not taken place yet) or that a call be not interruptible at all (e.g. when we want to do writeback and don't want a signal interrupting a VM-induced writeback). (3) Increase the minimum delay on MSG_WAITALL for userspace sendmsg() when waiting for Tx buffer space as a 2*RTT delay is really small over 10G ethernet and a 1 jiffy timeout might be essentially 0 if at the end of the jiffy period. (4) Fix some tracing output in AFS to make it consistent with rxrpc. (5) Make sure aborted asynchronous AFS operations are tidied up properly so we don't end up with stuck rxrpc calls. (6) Make AFS client calls uninterruptible in the Rx phase. If we don't wait for the reply to be fully gathered, we can't update the local VFS state and we end up in an indeterminate state with respect to the server. ==================== Signed-off-by: -
Ido Schimmel authored
During initialization the driver issues a software reset command and then waits for the system status to change back to "ready" state. However, before issuing the reset command the driver does not check that the system is actually in "ready" state. On Spectrum-{1,2} systems this was always the case as the hardware initialization time is very short. On Spectrum-3 systems this is no longer the case. This results in the software reset command timing-out and the driver failing to load: [ 6.347591] mlxsw_spectrum3 0000:06:00.0: Cmd exec timed-out (opcode=40(ACCESS_REG),opcode_mod=0,in_mod=0) [ 6.358382] mlxsw_spectrum3 0000:06:00.0: Reg cmd access failed (reg_id=9023(mrsr),type=write) [ 6.368028] mlxsw_spectrum3 0000:06:00.0: cannot register bus device [ 6.375274] mlxsw_spectrum3: probe of 0000:06:00.0 failed with error -110 Fix this by waiting for the system to become ready both before issuing the reset command and afterwards. In case of failure, print the last system status to aid in debugging. Fixes: da382875 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by:Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
- 19 Mar, 2020 10 commits
-
-
Edward Cree authored
nf_flow_rule_match() sets control.addr_type in key, so needs to also set the corresponding mask. An exact match is wanted, so mask is all ones. Fixes: c29f74e0 ("netfilter: nf_flow_table: hardware offload support") Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Paul Blakey authored
Freeing a flowtable with offloaded flows, the flow are deleted from hardware but are not deleted from the flow table, leaking them, and leaving their offload bit on. Add a second pass of the disabled gc to delete the these flows from the flow table before freeing it. Fixes: c29f74e0 ("netfilter: nf_flow_table: hardware offload support") Signed-off-by:
Paul Blakey <paulb@mellanox.com> Signed-off-by:
-
Haishuang Yan authored
Since pskb_may_pull may change skb->data, so we need to reload ip{v6}h at the right place. Fixes: a908fdec ("netfilter: nf_flow_table: move ipv6 offload hook code to nf_flow_table") Fixes: 7d208687 ("netfilter: nf_flow_table: move ipv4 offload hook code to nf_flow_table") Signed-off-by:Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
-
Haishuang Yan authored
Since nf_flow_snat_port and nf_flow_snat_ip{v6} call pskb_may_pull() which may change skb->data, so we need to reload ip{v6}h at the right place. Fixes: a908fdec ("netfilter: nf_flow_table: move ipv6 offload hook code to nf_flow_table") Fixes: 7d208687 ("netfilter: nf_flow_table: move ipv4 offload hook code to nf_flow_table") Signed-off-by: -
David S. Miller authored
Jason A. Donenfeld says: ==================== wireguard fixes for 5.6-rc7 I originally intended to spend this cycle working on fun optimizations and architecture for WireGuard for 5.7, but I've been a bit neurotic about having 5.6 ship without any show stopper bugs. WireGuard has been stable for a long time now, but that doesn't make me any less nervous about the real deal in 5.6. To that end, I've been doing code reviews and having discussions, and we also had a security firm audit the code. That audit didn't turn up any vulnerabilities, but they did make a good defense-in-depth suggestion. This series contains: 1) Removal of a duplicated header, from YueHaibing. 2) Testing with 64-bit time in our test suite. 3) Account for skb->protocol==0 due to AF_PACKET sockets, suggested by Florian Fainelli. 4) Clean up some code in an unreachable switch/case branch, suggested by Florian Fainelli. 5) Better handling of low-order points, discussed with Mathias Hall-Andersen. ==================== Signed-off-by: -
Jason A. Donenfeld authored
We precompute the static-static ECDH during configuration time, in order to save an expensive computation later when receiving network packets. However, not all ECDH computations yield a contributory result. Prior, we were just not letting those peers be added to the interface. However, this creates a strange inconsistency, since it was still possible to add other weird points, like a valid public key plus a low-order point, and, like points that result in zeros, a handshake would not complete. In order to make the behavior more uniform and less surprising, simply allow all peers to be added. Then, we'll error out later when doing the crypto if there's an issue. This also adds more separation between the crypto layer and the configuration layer. Discussed-with: Mathias Hall-Andersen <mathias@hall-andersen.dk> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Jason A. Donenfeld authored
The situation in which we wind up hitting the default case here indicates a major bug in earlier parsing code. It is not a usual thing that should ever happen, which means a "friendly" message for it doesn't make sense. Rather, replace this with a WARN_ON, just like we do earlier in the file for a similar situation, so that somebody sends us a bug report and we can fix it. Reported-by:
Fabian Freyer <fabianfreyer@radicallyopensecurity.com> Signed-off-by:
-
Jason A. Donenfeld authored
We carry out checks to the effect of: if (skb->protocol != wg_examine_packet_protocol(skb)) goto err; By having wg_skb_examine_untrusted_ip_hdr return 0 on failure, this means that the check above still passes in the case where skb->protocol is zero, which is possible to hit with AF_PACKET: struct sockaddr_pkt saddr = { .spkt_device = "wg0" }; unsigned char buffer[5] = { 0 }; sendto(socket(AF_PACKET, SOCK_PACKET, /* skb->protocol = */ 0), buffer, sizeof(buffer), 0, (const struct sockaddr *)&saddr, sizeof(saddr)); Additional checks mean that this isn't actually a problem in the code base, but I could imagine it becoming a problem later if the function is used more liberally. I would prefer to fix this by having wg_examine_packet_protocol return a 32-bit ~0 value on failure, which will never match any value of skb->protocol, which would simply change the generated code from a mov to a movzx. However, sparse complains, and adding __force casts doesn't seem like a good idea, so instead we just add a simple helper function to check for the zero return value. Since wg_examine_packet_protocol itself gets inlined, this winds up not adding an additional branch to the generated code, since the 0 return value already happens in a mergable branch. Reported-by: -
Jason A. Donenfeld authored
In case this helps expose bugs with the newer 64-bit time_t types, we do our testing with the newer musl that supports this as well as CONFIG_COMPAT_32BIT_TIME=n. This matters to us, since wireguard does in fact deal with timestamps. Signed-off-by:
-
YueHaibing authored
This commit removes a duplicated include. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
- 18 Mar, 2020 4 commits
-
-
Taehee Yoo authored
gro_cells_init() returns error if memory allocation is failed. But the vxlan module doesn't check the return value of gro_cells_init(). Fixes: 58ce31cc ("vxlan: GRO support at tunnel layer")` Signed-off-by:
-
Paul Blakey authored
Currently, on replace, the previous action instance params is swapped with a newly allocated params. The old params is only freed (via kfree_rcu), without releasing the allocated ct zone template related to it. Call tcf_ct_params_free (via call_rcu) for the old params, so it will release it. Fixes: b57dc7c1 ("net/sched: Introduce action ct") Signed-off-by:
-
Mauro Carvalho Chehab authored
There's a markup for link with is "foo_". On this kernel-doc comment, we don't want this, but instead, place a literal reference. So, escape the literal with ``foo``, in order to avoid this warning: ./net/core/dev.c:5195: WARNING: Unknown target name: "page_is". Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
The indentation for the returned values are weird, causing those warnings: ./drivers/net/phy/sfp-bus.c:579: WARNING: Unexpected indentation. ./drivers/net/phy/sfp-bus.c:619: WARNING: Unexpected indentation. Use a list and change the identation for it to be properly parsed by the documentation toolchain. Signed-off-by:
-
