- 09 Dec, 2022 22 commits
-
-
Lorenzo Bianconi authored
Introduce the capability to support per-phy led blinking. This is needed for devices supporting dbdc. Co-developed-by:
Ryder Lee <ryder.Lee@mediatek.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Introduce the capability to support per-phy led blinking. This is needed for devices supporting dbdc. Tested-by:
Frank Wunderlich <frank-w@public-files.de> Co-developed-by:
-
Lorenzo Bianconi authored
Move leds struct in mt76_phy in order to have leds associated to phy (e.g. in dbdc mode) instead of per device. Tested-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to support per-phy leds. Tested-by:
-
Deren Wu authored
The default case for frame_contorl is invalid. We should always assign addr3 of this frame properly. Coverity error message: if (ieee80211_has_a4(hdr.frame_control)) (19) Event uninit_use_in_call: Using uninitialized value "hdr". Field "hdr.addr3" is uninitialized when calling "memcpy". memcpy(skb_push(skb, sizeof(hdr)), &hdr, sizeof(hdr)); else memcpy(skb_push(skb, sizeof(hdr) - 6), &hdr, sizeof(hdr) - 6); Fixes: 0880d408 ("mt76: connac: move mt76_connac2_reverse_frag0_hdr_trans in mt76-connac module") Signed-off-by:
Deren Wu <deren.wu@mediatek.com> Signed-off-by:
-
Ryder Lee authored
In the expression "map[i].qid << 24" starts as u8, but is promoted to "signed int", then sign-extended to type "unsigned long", which is not intended. Cast to u32 to avoid the sign extension. Fixes: 776ec4e7 ("mt76: mt7915: rework debugfs queue info") Signed-off-by:
-
Ryder Lee authored
In the expression "map[i].qid << 24" starts as u8, but is promoted to "signed int", then sign-extended to type "unsigned long", which is not intended. Cast to u32 to avoid the sign extension. Reported-by:
coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1527813 ("Integer handling issues") Fixes: 98686cd2 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by:
-
Quan Zhou authored
In ACPI enabled devices, mt7921 should read MTFG table from platform hardware. Apply necessary settings for firmware capabilities through CLC command. Co-developed-by:
Quan Zhou <quan.zhou@mediatek.com> Signed-off-by:
-
Lorenzo Bianconi authored
After 'commit ba45841c ("wifi: mt76: mt76x02: simplify struct mt76x02_rate_power")', mt76x02 relies on ht[0-7] rate_power data for vht mcs{0,7}, while it uses vth[0-1] rate_power for vht mcs {8,9}. Fix a possible out-of-bound access in mt76x0_phy_get_target_power routine. Fixes: ba45841c ("wifi: mt76: mt76x02: simplify struct mt76x02_rate_power") Signed-off-by:
-
Lorenzo Bianconi authored
Fix the following sparse warnings in mt7996_mcu_sta_he_tlv routine: warning: incorrect type in assignment (different base types) expected unsigned char got restricted __le16 [usertype] warning: incorrect type in assignment (different base types) expected unsigned char got restricted __le16 [usertype] Fixes: 98686cd2 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by:
-
Ryder Lee authored
addr <= MT_CBTOP2_PHY_END(0xffffffff) is always true (<= u32max), so drop it. Fixes: 98686cd2 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by:
-
Ryder Lee authored
smatch warnings: addr <= MT_CBTOP2_PHY_END(0xffffffff) is always true (<= u32max), so drop it. Fixes: cd4c314a ("mt76: mt7915: refine register definition") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Ryder Lee authored
The mcu event might not be reliable, so check the correctness of data before handling it. Signed-off-by:
-
Ryder Lee authored
Check return value of mt7996_mcu_get_eeprom_free_block() first before accessing free_block_num. Fixes: 98686cd2 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by:
-
Ryder Lee authored
Check return value of mt7915_mcu_get_eeprom_free_block() first before accessing free_block_num. Fixes: bbc1d415 ("mt76: mt7915: add default calibrated data support") Signed-off-by:
-
Ryder Lee authored
The current flow confuses coverity check that leads to false reporting, so split the offs[] into two pieces according to chipset revision to silence coverity tool. Signed-off-by:
-
Ryder Lee authored
This code is supposed to set a u32 value, but casting will not work on big endian systems. Reported-by:
-
Ryder Lee authored
Coverity message: using tainted "r->band_idx" variable as an index into an array "(*dev).mt76.phys". Reported-by:
-
Ryder Lee authored
Coverity message: using tainted "hdr->band" variable as an index into an array "(*dev).mt76.phys". Reported-by:
-
Ryder Lee authored
Coverity message: variable "buf" going out of scope leaks the storage. Reported-by:
-
Deren Wu authored
SDIO may need addtional 511 bytes to align bus operation. If the tailroom of this skb is not big enough, we would access invalid memory region. For low level operation, increase skb size to keep valid memory access in SDIO host. Error message: [69.951] BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0xe9/0x1a0 [69.951] Read of size 64 at addr ffff88811c9cf000 by task kworker/u16:7/451 [69.951] CPU: 4 PID: 451 Comm: kworker/u16:7 Tainted: G W OE 6.1.0-rc5 #1 [69.951] Workqueue: kvub300c vub300_cmndwork_thread [vub300] [69.951] Call Trace: [69.951] <TASK> [69.952] dump_stack_lvl+0x49/0x63 [69.952] print_report+0x171/0x4a8 [69.952] kasan_report+0xb4/0x130 [69.952] kasan_check_range+0x149/0x1e0 [69.952] memcpy+0x24/0x70 [69.952] sg_copy_buffer+0xe9/0x1a0 [69.952] sg_copy_to_buffer+0x12/0x20 [69.952] __command_write_data.isra.0+0x23c/0xbf0 [vub300] [69.952] vub300_cmndwork_thread+0x17f3/0x58b0 [vub300] [69.952] process_one_work+0x7ee/0x1320 [69.952] worker_thread+0x53c/0x1240 [69.952] kthread+0x2b8/0x370 [69.952] ret_from_fork+0x1f/0x30 [69.952] </TASK> [69.952] Allocated by task 854: [69.952] kasan_save_stack+0x26/0x50 [69.952] kasan_set_track+0x25/0x30 [69.952] kasan_save_alloc_info+0x1b/0x30 [69.952] __kasan_kmalloc+0x87/0xa0 [69.952] __kmalloc_node_track_caller+0x63/0x150 [69.952] kmalloc_reserve+0x31/0xd0 [69.952] __alloc_skb+0xfc/0x2b0 [69.952] __mt76_mcu_msg_alloc+0xbf/0x230 [mt76] [69.952] mt76_mcu_send_and_get_msg+0xab/0x110 [mt76] [69.952] __mt76_mcu_send_firmware.cold+0x94/0x15d [mt76] [69.952] mt76_connac_mcu_send_ram_firmware+0x415/0x54d [mt76_connac_lib] [69.952] mt76_connac2_load_ram.cold+0x118/0x4bc [mt76_connac_lib] [69.952] mt7921_run_firmware.cold+0x2e9/0x405 [mt7921_common] [69.952] mt7921s_mcu_init+0x45/0x80 [mt7921s] [69.953] mt7921_init_work+0xe1/0x2a0 [mt7921_common] [69.953] process_one_work+0x7ee/0x1320 [69.953] worker_thread+0x53c/0x1240 [69.953] kthread+0x2b8/0x370 [69.953] ret_from_fork+0x1f/0x30 [69.953] The buggy address belongs to the object at ffff88811c9ce800 which belongs to the cache kmalloc-2k of size 2048 [69.953] The buggy address is located 0 bytes to the right of 2048-byte region [ffff88811c9ce800, ffff88811c9cf000) [69.953] Memory state around the buggy address: [69.953] ffff88811c9cef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [69.953] ffff88811c9cef80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [69.953] >ffff88811c9cf000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [69.953] ^ [69.953] ffff88811c9cf080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [69.953] ffff88811c9cf100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 764dee47 ("mt76: sdio: move common code in mt76_sdio module") Suggested-by:YN Chen <YN.Chen@mediatek.com> Signed-off-by:
-
Wang Yufen authored
Add missing of_node_put() after of_reserved_mem_lookup() Fixes: 99ad32a4 ("mt76: mt7915: add support for MT7986") Signed-off-by:
Wang Yufen <wangyufen@huawei.com> Signed-off-by:
-
- 08 Dec, 2022 18 commits
-
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2022-12-07' of http://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next An additional set of patches intended for v6.2. It contains: * Adjustments for the new HW * Adjustments for FW API update * A few small fixes and cleanups * Improvements for debug dumps mechanism
-
Jun ASAKA authored
Fixing "Path A RX IQK failed" and "Path B RX IQK failed" issues for rtl8192eu chips by replacing the arguments with the ones in the updated official driver as shown below. 1. https://github.com/Mange/rtl8192eu-linux-driver 2. vendor driver version: 5.6.4 Signed-off-by:
Jun ASAKA <JunASAKA@zzy040330.moe> Reviewed-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221207033926.11777-1-JunASAKA@zzy040330.moe
-
Peter Kosyh authored
Commit 40ca1882 ("rtlwifi: btcoex: 23b 1ant: fine tune for wifi not connected") introduced never executed branches. Compile test only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Peter Kosyh <pkosyh@yandex.ru> Acked-by:
-
Peter Kosyh authored
Extra rtl_get_bbreg() call looks like redundant reading. The read has already been done in the "else" branch. Compile test only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
-
Sascha Hauer authored
Add support for the rtw8723du chipset based on https://github.com/ulli-kroll/rtw88-usb.gitSigned-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Sascha Hauer authored
Add support for the rtw8822cu chipset based on https://github.com/ulli-kroll/rtw88-usb.gitSigned-off-by:
-
Sascha Hauer authored
Add support for the rtw8822bu chipset based on https://github.com/ulli-kroll/rtw88-usb.gitSigned-off-by:
-
Sascha Hauer authored
Add support for the rtw8821cu chipset based on https://github.com/ulli-kroll/rtw88-usb.gitSigned-off-by:
-
Sascha Hauer authored
Add the common bits and pieces to add USB support to the RTW88 driver. This is based on https://github.com/ulli-kroll/rtw88-usb.git which itself is first written by Neo Jou. Signed-off-by:
neo_jou <neo_jou@realtek.com> Signed-off-by:
Hans Ulli Kroll <linux@ulli-kroll.de> Signed-off-by:
-
Sascha Hauer authored
The driver uses ieee80211_iterate_active_interfaces_atomic() and ieee80211_iterate_stations_atomic() in several places and does register accesses in the iterators. This doesn't cope with upcoming USB support as registers can only be accessed non-atomically. Split these into a two stage process: First use the atomic iterator functions to collect all active interfaces or stations on a list, then iterate over the list non-atomically and call the iterator on each entry. Signed-off-by:
-
Sascha Hauer authored
coex->mutex is used in rtw_coex_info_request() only. Most callers of this function hold rtwdev->mutex already, except for one callsite in the debugfs code. The debugfs code alone doesn't justify the extra lock, so acquire rtwdev->mutex there as well and drop the now unnecessary spinlock. Signed-off-by:
-
Sascha Hauer authored
The h2c.lock spinlock is used in rtw_fw_send_h2c_command() and rtw_fw_send_h2c_packet(). Most callers call this with rtwdev->mutex held, except from one callsite in the debugfs code. The debugfs code alone doesn't justify the extra lock, so acquire rtwdev->mutex in debugfs and drop the now unnecessary spinlock. Signed-off-by:
-
Sascha Hauer authored
The rtwdev->rf_lock spinlock protects the rf register accesses in rtw_read_rf() and rtw_write_rf(). Most callers of these functions hold rtwdev->mutex already with the exception of the callsites in the debugfs code. The debugfs code doesn't justify an extra lock, so acquire the mutex there as well before calling rf register accessors and drop the now unnecessary spinlock. Signed-off-by:
-
Sascha Hauer authored
rtw_fw_beacon_filter_config() is called once with rtwdev->mutex held and once without the mutex held. Call it consistently with rtwdev->mutex held. Signed-off-by:
-
Sascha Hauer authored
It's confusing to read two different firmware versions in the syslog for the same device: rtw_8822cu 2-1:1.2: Firmware version 9.9.4, H2C version 15 rtw_8822cu 2-1:1.2: Firmware version 9.9.11, H2C version 15 Print the firmware type in this message to make clear these are really two different firmwares for different purposes: rtw_8822cu 1-1.4:1.2: WOW Firmware version 9.9.4, H2C version 15 rtw_8822cu 1-1.4:1.2: Firmware version 9.9.11, H2C version 15 Signed-off-by:
-
Po-Hao Huang authored
To support multiple vifs, fw need more information of each role. Send this info to make things work as expected. Signed-off-by:
Po-Hao Huang <phhuang@realtek.com> Signed-off-by:
-
Po-Hao Huang authored
Remove according vifs from list if we couldn't set this interface up. Otherwise the rtwvif_list could contain unreferenced objects. Signed-off-by:
-
Po-Hao Huang authored
Disable hardware beacon related functions when ap stops. So hardware won't transmit beacons while interface is already removed. Signed-off-by:
-
