- 18 Dec, 2015 40 commits
-
-
Leo Kim authored
This patch removes pUserVoid that is first argument of reset_shadow_found function because it is not used in this function. Remove argument in the function call also. Signed-off-by:
Leo Kim <leo.kim@atmel.com> Signed-off-by:
Glen Lee <glen.lee@atmel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Leo Kim authored
This patch renames s32Freq variable to freq to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames pstrNetworkInfo variable to network_info to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames bDirectScan to direct_scan that is third argument of refresh_scan function to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames pUserVoid to user_void that is first argument of refresh_scan function to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch removes pUserVoid that is first argument of clear_shadow_scan function because it is not used in this function. Remove argument in the function call also. Signed-off-by:
-
Leo Kim authored
This patch renames wilc_connected_SSID variable to wilc_connected_ssid to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames duringIP_TIME variable to during_ip_time to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames bWilc_ie variable to wilc_ie to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames u8P2P_vendorspec variable to p2p_vendor_spec to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames u8P2Precvrandom variable to p2p_recv_random to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames u8P2Plocalrandom variable to p2p_local_random to avoid camelcase. And, remove the relation comment. Signed-off-by:
-
Leo Kim authored
This patch renames u8P2P_oui variable to p2p_oui to avoid camelcase. And, remove the relation comment. Signed-off-by:
-
Leo Kim authored
This patch renames u8WLANChannel variable to wlan_channel to avoid camelcase. And, remove the relation comment. Signed-off-by:
-
Leo Kim authored
This patch renames WILC_WFI_rates variable to ieee80211_bitrates to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames WILC_WFI_2ghz_channels variable to ieee80211_2ghz_channels to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames astrLastScannedNtwrksShadow variable to last_scanned_shadow to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames u32LastScannedNtwrksCountShadow variable to last_scanned_cnt to avoid camelcase. Signed-off-by:
-
Glen Lee authored
This patch changes wilc_dev with wilc in the function call wilc_wlan_get_num_conn_ifcs, and remove wilc_dev and it's related codes. Signed-off-by:
-
Glen Lee authored
This patch remove parameter struct wilc since it is not used and also wilc_dev will be removed. Signed-off-by:
-
Glen Lee authored
This patch passes the struct wilc to the function and use it instead of global variable wilc_dev. Signed-off-by:
-
Glen Lee authored
This patch pass struct wilc to the function and use it instead of global variable wilc_dev. Signed-off-by:
-
Glen Lee authored
This patch passes struct wilc to wilc_send_config_pkt. The function wilc_wlan_cfg_set and wilc_wlan_cfg_get function will get wilc to replace wilc_dev with it. Signed-off-by:
-
Glen Lee authored
This patch adds struct wilc to host_if_dev and assign wilc to use driver's primary structure in host_if_dev. Signed-off-by:
-
Glen Lee authored
This patch adds new function parameter struct wilc and use it instead of global variable wilc_dev, and pass wilc to the function as well. Signed-off-by:
-
Glen Lee authored
This patch adds new function parameter struct wilc and use it instead of global variable wilc_dev, and pass wilc to the functions as well. Signed-off-by:
-
Glen Lee authored
This patch add new function parameter struct wilc and use it instead of wilc_dev, and pass wilc to the function as well. Signed-off-by:
-
Glen Lee authored
This patch adds new function parameter struct wilc and use it instead of global variable wilc_dev and pass wilc to the function as well. Signed-off-by:
-
Glen Lee authored
This patch adds new function parameter struct wilc and use it instead of wilc_dev. Pass wilc to the function as well. Signed-off-by:
-
Glen Lee authored
This patch adds new function parameter struct wilc to all function pointers of struct wilc_hif_func, and all functions of wilc_sdio.c and wilc_spi.c need to be changed as it's function pointer is changed. Pass wilc in all the functions call as well. The wilc will be passed to functions in linux_wlan_sdio.c and linux_wlan_spi.c to replace with global variable wilc_dev in the next patch. Signed-off-by:
-
Glen Lee authored
This patch passes struct wilc to the functions which use hif_func inside. The function pointers of wilc_hif_func will pass wilc also in the later patch. Pass wilc to the functions if necessary. Flollowings are modified functions. chip_wakeup wilc_chip_sleep_manually chip_allow_sleep wilc_get_chipid wilc_unknown_isr_ext wilc_pllupdate_isr_ext wilc_sleeptimer_isr_ext Signed-off-by:
-
Glen Lee authored
This patch removes PLAT_WMS8304 and it's related codes as well. We will not use this way of supporting other platform. This will be supported if necessary by device tree later. Signed-off-by:
-
Glen Lee authored
This patch removes spi speed control codes. We are not using define SPEED to specify speed of spi, it is not proper way of doing this. It will be provided by the device tree. The following functions and variable are removed. MIN_SPEED, MAX_SPEED, SPEED wilc_spi_set_max_speed wilc_spi_max_bus_speed wilc_spi_default_bus_speed hif_set_max_bus_speed hif_set_default_bus_speed Signed-off-by:
-
Glen Lee authored
This patch removes spi speed control related functions and variable. We cannot get exact clock what we need in this way and it can causes some problem in host side by setting the clock, so remove the codes. Speed control codes in spi also will removed in next patch, so it's ok to remove functions in linux_wlan.c and wilc_wlan.c which also not used anymore. The Following functions and varialbe are removed. MAX_SPEED, sdio_default_speed wilc_bus_set_default_speed wilc_bus_set_max_speed linux_sdio_set_speed linux_sdio_get_speed wilc_sdio_set_max_speed wilc_sdio_set_default_speed Signed-off-by:
-
Greg Kroah-Hartman authored
This was done to handle two large patch sets that conflicted to be merged together without forcing each developer to redo their work. Signed-off-by: -
Arnd Bergmann authored
We want to get rid of all global variables in this driver, and instead pass device structures from one function to another. This changes the linux_wlan.c and wilc_wlan.c to do this for the most part. There are a few exceptions where these functions are themselves called from another part of the driver that does not have an instance pointer at hand. Changing those would be a follow-up step. There are a few other globals that will have to get moved into struct wilc at a later point. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
So far, my patches tried to do equivalent conversions of the existing code. This one goes beyond that by restructuring how the devices get probed. In particular, the spi driver no longer creates the netdev until the device is probed, and I've removed the global wilc_sdio_func and wilc_spi_dev variables in favor of retrieving them from the wilc_dev variable that will eventually get passed through all functions instead of using a global. Signed-off-by:
-
Arnd Bergmann authored
The SPI and SDIO specific code is now separate enough that we just need to restructure the Makefile and Kconfig logic a bit and export a couple of symbols from the common module to have separate bus glue drivers. Signed-off-by:
-
Arnd Bergmann authored
The last remaining user of WILC_SDIO macro checks for the correct time to wait in an interrupt for the PLL to settle. We can replace this with a runtime check and remove both WILC_SDIO and WILC_SPI, as we no longer need conditional compilation based on the hardware type. Signed-off-by:
-
Arnd Bergmann authored
As a preparation for turning the SDIO side of wilc1000 into a separate module, this removes the last direct caller from the core module into the sdio specific portion. All calls to wilc_sdio_enable_interrupt() and wilc_sdio_disable_interrupt() now go through a function pointer in wilc_hif_func. We also change arguments slightly to pass the device, as we are already touching those lines and the change will be needed later to remove the global variables. Signed-off-by:
-
