The bias for the gyroscope is not used correctly. The sensor bias
needs to be used in calculation of the 'sensivity' instead of being
an offset.

In practice this has little input on the values as the bias values
tends to be small (+/- 20).
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reported-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Now that hid-playstation provides DualShock4 support, remove
DualShock4 support from hid-sony as it is redundant.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Benjamin Tissoires:

 - Four potential NULL pointers dereferences (Bastien Nocera, Enrik
   Berkhan, Jiasheng Jiang and Roderick Colenbrander)

 - Allow Wacom devices in bootloader mode to be flashed (Jason Gerecke)

 - Some assorted devices quirks (José Expósito and Terry Junge)

* tag 'for-linus-2022122101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: sony: Fix unused function warning
  HID: plantronics: Additional PIDs for double volume key presses quirk
  HID: multitouch: fix Asus ExpertBook P2 P2451FA trackpoint
  HID: Ignore HP Envy x360 eu0009nv stylus battery
  HID: wacom: Ensure bootloader PID is usable in hidraw mode
  HID: amd_sfh: Add missing check for dma_alloc_coherent
  HID: playstation: fix free of uninialized pointer for DS4 in Bluetooth.
  HID: mcp2221: don't connect hidraw
  HID: logitech-hidpp: Guard FF init code against non-USB devices

Pull media fixes from Mauro Carvalho Chehab:

 - A regression at V4L2 core breaking string controls

 - Build warning fixes on sun6i drivers when building with clang

* tag 'media/v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: sun6i-isp: params: Unregister pending buffer on cleanup
  media: sun6i-isp: params: Fix incorrect indentation
  media: sun6i-isp: capture: Fix uninitialized variable use
  media: sun6i-isp: proc: Declare subdev ops as static
  media: sun6i-isp: proc: Error out on invalid port to fix warning
  media: sun6i-isp: proc: Fix return code handling in stream off path
  media: sun8i-a83t-mipi-csi2: Clarify return code handling in stream off path
  media: sun6i-mipi-csi2: Clarify return code handling in stream off path
  media: sun6i-csi: capture: Remove useless ret initialization
  media: sun6i-csi: bridge: Error out on invalid port to fix warning
  media: v4l2-ctrls-api.c: add back dropped ctrl->is_new = 1

Merge tag 'pwm/for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Various changes across the board, mostly improvements and cleanups"

* tag 'pwm/for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (42 commits)
  pwm: pca9685: Convert to i2c's .probe_new()
  pwm: sun4i: Propagate errors in .get_state() to the caller
  pwm: Handle .get_state() failures
  pwm: sprd: Propagate errors in .get_state() to the caller
  pwm: rockchip: Propagate errors in .get_state() to the caller
  pwm: mtk-disp: Propagate errors in .get_state() to the caller
  pwm: imx27: Propagate errors in .get_state() to the caller
  pwm: cros-ec: Propagate errors in .get_state() to the caller
  pwm: crc: Propagate errors in .get_state() to the caller
  leds: qcom-lpg: Propagate errors in .get_state() to the caller
  drm/bridge: ti-sn65dsi86: Propagate errors in .get_state() to the caller
  pwm/tracing: Also record trace events for failed API calls
  pwm: Make .get_state() callback return an error code
  pwm: pxa: Enable for MMP platform
  pwm: pxa: Add reference manual link and limitations
  pwm: pxa: Use abrupt shutdown mode
  pwm: pxa: Remove clk enable/disable from pxa_pwm_config
  pwm: pxa: Set duty cycle to 0 when disabling PWM
  pwm: pxa: Remove pxa_pwm_enable/disable
  pwm: mediatek: Add support for MT7986
  ...

Pull remoteproc updates from Bjorn Andersson:
 "rproc-virtio device names are now auto generated, to avoid conflicts
  between remoteproc instances.

  The imx_rproc driver is extended with support for communicating with
  and attaching to a running M4 on i.MX8QXP, as well as support for
  attaching to the M4 after self-recovering from a crash. Support is
  added for i.MX8QM and mailbox channels are reconnected during the
  recovery process, in order to avoid data corruption.

  The Xilinx Zynqmp firmware interface is extended and support for the
  Xilinx R5 RPU is introduced.

  Various resources leaks, primarily in error paths, throughout the
  Qualcomm drivers are corrected.

  Lastly a fix to ensure that pm_relax is invoked even if the remoteproc
  instance is stopped between a crash is being reported and the recovery
  handler is scheduled"

* tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
  remoteproc: core: Do pm_relax when in RPROC_OFFLINE state
  remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()
  remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
  remoteproc: qcom_q6v5_pas: detach power domains on remove
  remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
  remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
  remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
  remoteproc: sysmon: Make QMI message rules const
  drivers: remoteproc: Add Xilinx r5 remoteproc driver
  firmware: xilinx: Add RPU configuration APIs
  firmware: xilinx: Add shutdown/wakeup APIs
  firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
  arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
  dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
  remoteproc: core: Use device_match_of_node()
  remoteproc: imx_rproc: Correct i.MX93 DRAM mapping
  remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP
  remoteproc: imx_rproc: Request mbox channel later
  remoteproc: imx_rproc: Support i.MX8QM
  remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP
  ...

Pull mailbox updates from Jassi Brar:

 - qcom: enable sc8280xp, sm8550 and sm4250 support

 - ti: default to ARCH_K3 for msg manager

 - mediatek:
    - add mt8188 and mt8186 support
    - request irq only after got ready

 - zynq-ipi: fix error handling after device_register

 - mpfs: check sys-con status

 - rockchip: simplify by using device_get_match_data

* tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: qcom-ipcc: Add compatible for SM8550
  mailbox: mtk-cmdq: Do not request irq until we are ready
  mailbox: zynq-ipi: fix error handling while device_register() fails
  mailbox: mtk-cmdq-mailbox: Use platform data directly instead of copying
  mailbox: arm_mhuv2: Fix return value check in mhuv2_probe()
  dt-bindings: mailbox: mediatek,gce-mailbox: add mt8188 compatible name
  dt-bindings: mailbox: add GCE header file for mt8188
  mailbox: mpfs: read the system controller's status
  mailbox: mtk-cmdq: add MT8186 support
  mailbox: mtk-cmdq: add gce ddr enable support flow
  mailbox: mtk-cmdq: add gce software ddr enable private data
  mailbox: mtk-cmdq: Use GCE_CTRL_BY_SW definition instead of number
  mailbox: rockchip: Use device_get_match_data() to simplify the code
  dt-bindings: mailbox: qcom-ipcc: Add sc8280xp compatible
  mailbox: config: ti-msgmgr: Default set to ARCH_K3 for TI msg manager
  mailbox: qcom-apcs-ipc: Add SM4250 APCS IPC support
  dt-bindings: mailbox: qcom: Add SM4250 APCS compatible

Pull backlight update from Lee Jones:
 "Convert a bunch of I2C class drivers over to .probe_new()"

* tag 'backlight-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: tosa: Convert to i2c's .probe_new()
  backlight: lv5207lp: Convert to i2c's .probe_new()
  backlight: lp855x: Convert to i2c's .probe_new()
  backlight: lm3639: Convert to i2c's .probe_new()
  backlight: lm3630a: Convert to i2c's .probe_new()
  backlight: bd6107: Convert to i2c's .probe_new()
  backlight: arcxcnn: Convert to i2c's .probe_new()
  backlight: adp8870: Convert to i2c's .probe_new()
  backlight: adp8860: Convert to i2c's .probe_new()

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for Ampere Computing SMpro
   - Add support for TI TPS65219 PMIC

  New Functionality:
   - Add support for multiple devices of the same type; rk808

  Fix-ups:
   - Convert a bunch of I2C class drivers over to .probe_new()
   - Remove superfluous includes; mc13xxx-*, palmas, timberdale
   - Use correct includes for GPIO handling; madera-core
   - Convert to GPIOD; twl6040
   - Remove unused platform data handling; twl6040
   - Device Tree changes; many
   - Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld
   - Add support for modules; palmas
   - Enable COMPILE_TEST support; intel_soc_pmic*
   - Trivial: spelling / whitespace fixes; mc13xxx-spi
   - Replace old PM helpers with new ones; many
   - Convert deprecated mask_invert usage to unmask_base; many
   - Use devm_*() calls; qcom_rpm
   - MAINTAINER fix-ups
   - Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc,
     stm32-lptimer, qcom_rpm, rohm-*

  Bug Fixes:
   - Add bounds / error checking; mt6360-core
   - No sleeping inside critical sections; axp20x
   - Fix missing dependencies; ROHM_BD957XMUF
   - Repair error paths; qcom-pm8008"

* tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits)
  dt-bindings: mfd: da9062: Correct file name for watchdog
  mfd: pm8008: Fix return value check in pm8008_probe()
  mfd: rohm: Use dev_err_probe()
  mfd: Drop obsolete dependencies on COMPILE_TEST
  dt-bindings: mfd: da9062: Move IRQ to optional properties
  mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code
  mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()
  mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource()
  mfd: rohm-bd9576: Convert to i2c's .probe_new()
  mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource()
  dt-bindings: Fix maintainer email for a few ROHM ICs
  mfd: palmas: Use device_get_match_data() to simplify the code
  Input: Add tps65219 interrupt driven powerbutton
  mfd: tps65219: Add driver for TI TPS65219 PMIC
  mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ
  mfd: wcd934x: Convert irq chip to config regs
  mfd: tps65090: Replace irqchip mask_invert with unmask_base
  mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base
  mfd: stpmic1: Fix swapped mask/unmask in irq chip
  mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base
  ...

The m68 hand-written assembler version of strcmp() has always been
broken: it returns the difference between the first non-matching byte
done as a 8-bit subtraction.

That is _almost_ right, but is broken for the overflow case.  The
strcmp() function should indeed return the sign of the difference
between the first byte that differs, but the subtraction needs to be
done in a wider type than 'char'.  Otherwise the ordering isn't actually
stable.

This went unnoticed for basically forever, because nobody ever cares
about non-US-ASCII orderings in the kernel (in fact, most users only
care about "exact match or not"), so overflows don't really happen in
practice, even if it was very very wrong.

But that mostly unnoticeable bug becomes very noticeable by the recent
change to make 'char' be unsigned in the kernel across all architectures
(commit 3bc753c0: "kbuild: treat char as always unsigned"). Because
the code not only did the subtraction in the wrong type width, it also
used 'char' to then make the compiler expand the result from an 8-bit
difference to the 'int' return value.

So now with an unsigned char that incorrect arithmetic width was then
not even sign-expanded, and always returned just a positive integer.

We could re-instate the old broken code by just turning the 'char' into
'signed char' as has been done elsewhere where people depended on the
signedness of 'char', but since the whole function was broken to begin
with, and we have a non-broken default fallback implementation, let's
just remove this broken function entirely.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/lkml/20221221145332.GA2399037@roeck-us.net/
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, netfilter and can.

  Current release - regressions:

   - bpf: synchronize dispatcher update with bpf_dispatcher_xdp_func

   - rxrpc:
      - fix security setting propagation
      - fix null-deref in rxrpc_unuse_local()
      - fix switched parameters in peer tracing

  Current release - new code bugs:

   - rxrpc:
      - fix I/O thread startup getting skipped
      - fix locking issues in rxrpc_put_peer_locked()
      - fix I/O thread stop
      - fix uninitialised variable in rxperf server
      - fix the return value of rxrpc_new_incoming_call()

   - microchip: vcap: fix initialization of value and mask

   - nfp: fix unaligned io read of capabilities word

  Previous releases - regressions:

   - stop in-kernel socket users from corrupting socket's task_frag

   - stream: purge sk_error_queue in sk_stream_kill_queues()

   - openvswitch: fix flow lookup to use unmasked key

   - dsa: mv88e6xxx: avoid reg_lock deadlock in mv88e6xxx_setup_port()

   - devlink:
      - hold region lock when flushing snapshots
      - protect devlink dump by the instance lock

  Previous releases - always broken:

   - bpf:
      - prevent leak of lsm program after failed attach
      - resolve fext program type when checking map compatibility

   - skbuff: account for tail adjustment during pull operations

   - macsec: fix net device access prior to holding a lock

   - bonding: switch back when high prio link up

   - netfilter: flowtable: really fix NAT IPv6 offload

   - enetc: avoid buffer leaks on xdp_do_redirect() failure

   - unix: fix race in SOCK_SEQPACKET's unix_dgram_sendmsg()

   - dsa: microchip: remove IRQF_TRIGGER_FALLING in
     request_threaded_irq"

* tag 'net-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
  net: fec: check the return value of build_skb()
  net: simplify sk_page_frag
  Treewide: Stop corrupting socket's task_frag
  net: Introduce sk_use_task_frag in struct sock.
  mctp: Remove device type check at unregister
  net: dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq
  can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len
  can: flexcan: avoid unbalanced pm_runtime_enable warning
  Documentation: devlink: add missing toc entry for etas_es58x devlink doc
  mctp: serial: Fix starting value for frame check sequence
  nfp: fix unaligned io read of capabilities word
  net: stream: purge sk_error_queue in sk_stream_kill_queues()
  myri10ge: Fix an error handling path in myri10ge_probe()
  net: microchip: vcap: Fix initialization of value and mask
  rxrpc: Fix the return value of rxrpc_new_incoming_call()
  rxrpc: rxperf: Fix uninitialised variable
  rxrpc: Fix I/O thread stop
  rxrpc: Fix switched parameters in peer tracing
  rxrpc: Fix locking issues in rxrpc_put_peer_locked()
  rxrpc: Fix I/O thread startup getting skipped
  ...

Pull vfsuid cleanup from Christian Brauner:
 "This moves the ima specific vfs{g,u}id_t comparison helpers out of the
  header and into the one file in ima where they are used.

  We shouldn't incentivize people to use them by placing them into the
  header. As discussed and suggested by Linus in [1] let's just define
  them locally in the one file in ima where they are used"

Link: https://lore.kernel.org/lkml/CAHk-=wj4BpEwUd=OkTv1F9uykvSrsBNZJVHMp+p_+e2kiV71_A@mail.gmail.com [1]

* tag 'fs.vfsuid.ima.v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  mnt_idmapping: move ima-only helpers to ima

Pull more random number generator updates from Jason Donenfeld:
 "Two remaining changes that are now possible after you merged a few
  other trees:

   - #include <asm/archrandom.h> can be removed from random.h now,
     making the direct use of the arch_random_* API more of a private
     implementation detail between the archs and random.c, rather than
     something for general consumers.

   - Two additional uses of prandom_u32_max() snuck in during the
     initial phase of pulls, so these have been converted to
     get_random_u32_below(), and now the deprecated prandom_u32_max()
     alias -- which was just a wrapper around get_random_u32_below() --
     can be removed.

  In addition, there is one fix:

   - Check efi_rt_services_supported() before attempting to use an EFI
     runtime function.

     This affected EFI systems that disable runtime services yet still
     boot via EFI (e.g. the reporter's Lenovo Thinkpad X13s laptop), as
     well systems where EFI runtime services have been forcibly
     disabled, such as on PREEMPT_RT.

     On those machines, a very early and hard to diagnose crash would
     happen, preventing boot"

* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  prandom: remove prandom_u32_max()
  efi: random: fix NULL-deref when refreshing seed
  random: do not include <asm/archrandom.h> from random.h

Merge tag 'rcu-urgent.2022.12.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU fix from Paul McKenney:
 "This fixes a lockdep false positive in synchronize_rcu() that can
  otherwise occur during early boot.

  The fix simply avoids invoking lockdep if the scheduler has not yet
  been initialized, that is, during that portion of boot when interrupts
  are disabled"

* tag 'rcu-urgent.2022.12.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  rcu: Don't assert interrupts enabled too early in boot

The build_skb might return a null pointer but there is no check on the
return value in the fec_enet_rx_queue(). So a null pointer dereference
might occur. To avoid this, we check the return value of build_skb. If
the return value is a null pointer, the driver will recycle the page and
update the statistic of ndev. Then jump to rx_processing_done to clear
the status flags of the BD so that the hardware can recycle the BD.

Fixes: 95698ff6 ("net: fec: using page pool to manage RX buffers")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Shenwei Wang <Shenwei.wang@nxp.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20221219022755.1047573-1-wei.fang@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull m68knommu update from Greg Ungerer:
 "Only a single change to use the safer strscpy() instead of strncpy()
  when setting up the cmdline"

* tag 'm68knommu-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: use strscpy() to instead of strncpy()

Pull SPDX/License additions from Greg KH:
 "Here are two small updates for LICENSES and some kernel files that add
  the Copyleft-next license and use it in a SPDX tag as a dual-license
  for some kernel files.

  These have been discussed thoroughly in public on the linux-spdx
  mailing list, and have the needed acks on them, as well as having been
  in linux-next with no reported issues for quite some time"

* tag 'spdx-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  testing: use the copyleft-next-0.3.1 SPDX tag
  LICENSES: Add the copyleft-next-0.3.1 license

Pull more devicetree updates from Rob Herring:
 "This is mostly a treewide clean-up from Krzysztof. There's also a
  couple of fixes and things that fell thru the cracks.

  I must say this has been a nice merge window without bindings dumped
  in at the last minute introducing warnings.

  Summary:

   - Treewide dropping of redundant 'binding' or 'schema' from schema
     titles. This will be followed up with a automated check to catch
     these.

   - Re-sort vendor-prefies

   - Convert GPIO based watchdog to schema

   - Handle all the variations for clocks, resets, power domains in i.MX
     PCIe binding

   - Document missing 'power-domains' property in mxsfb

   - Fix error with path references in Tegra XUSB example

   - Honor CONFIG_CMDLINE* even without /chosen node"

* tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: drop redundant part of title (manual)
  dt-bindings: clock: drop redundant part of title
  dt-bindings: drop redundant part of title (beginning)
  dt-bindings: drop redundant part of title (end, part three)
  dt-bindings: drop redundant part of title (end, part two)
  dt-bindings: drop redundant part of title (end)
  dt-bindings: clock: st,stm32mp1-rcc: add proper title
  dt-bindings: memory-controllers: ti,gpmc-child: drop redundant part of title
  dt-bindings: drop redundant part of title of shared bindings
  dt-bindings: watchdog: gpio: Convert bindings to YAML
  dt-bindings: imx6q-pcie: Handle more resets on legacy platforms
  dt-bindings: imx6q-pcie: Handle various PD configurations
  dt-bindings: imx6q-pcie: Handle various clock configurations
  dt-bindings: hwmon: ntc-thermistor: drop Naveen Krishna Chatradhi from maintainers
  dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property
  dt-bindings: vendor-prefixes: sort entries alphabetically
  dt-bindings: usb: tegra-xusb: Remove path references
  of: fdt: Honor CONFIG_CMDLINE* even without /chosen node

Pull parisc updates from Helge Deller:
 "There is one noteable patch, which allows the parisc kernel to use the
  same MADV_xxx constants as the other architectures going forward. With
  that change only alpha has one entry left (MADV_DONTNEED is 6 vs 4 on
  others) which is different. To prevent an ABI breakage, a wrapper is
  included which translates old MADV values to the new ones, so existing
  userspace isn't affected. Reason for that patch is, that some
  applications wrongly used the standard MADV_xxx values even on some
  non-x86 platforms and as such those programs failed to run correctly
  on parisc (examples are qemu-user, tor browser and boringssl).

  Then the kgdb console and the LED code received some fixes, and some
  0-day warnings are now gone. Finally, the very last compile warning
  which was visible during a kernel build is now fixed too (in the vDSO
  code).

  The majority of the patches are tagged for stable series and in
  summary this patchset is quite small and drops more code than it adds:

Fixes:
   - Fix potential null-ptr-deref in start_task()
   - Fix kgdb console on serial port
   - Add missing FORCE prerequisites in Makefile
   - Drop PMD_SHIFT from calculation in pgtable.h

  Enhancements:
   - Implement a wrapper to align madvise() MADV_* constants with other
     architectures
   - If machine supports running MPE/XL, show the MPE model string

  Cleanups:
   - Drop duplicate kgdb console code
   - Indenting fixes in setup_cmdline()"

* tag 'parisc-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Show MPE/iX model string at bootup
  parisc: Add missing FORCE prerequisites in Makefile
  parisc: Move pdc_result struct to firmware.c
  parisc: Drop locking in pdc console code
  parisc: Drop duplicate kgdb_pdc console
  parisc: Fix locking in pdc_iodc_print() firmware call
  parisc: Drop PMD_SHIFT from calculation in pgtable.h
  parisc: Align parisc MADV_XXX constants with all other architectures
  parisc: led: Fix potential null-ptr-deref in start_task()
  parisc: Fix inconsistent indenting in setup_cmdline()

Compiling this driver without setting "CONFIG_SONY_FF" generates the
following warning:

	drivers/hid/hid-sony.c:2358:20: warning: unused function
	'sony_send_output_report' [-Wunused-function]
	static inline void sony_send_output_report(struct sony_sc *sc)
	                   ^
	1 warning generated.

Add the missing preprocessor check to fix it.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

I no longer work for Plantronics (aka Poly, aka HP) and do not have
access to the headsets in order to test. However, as noted by Maxim,
the other 32xx models that share the same base code set as the 3220
would need the same quirk. This patch adds the PIDs for the rest of
the Blackwire 32XX product family that require the quirk.

Plantronics Blackwire 3210 Series (047f:c055)
Plantronics Blackwire 3215 Series (047f:c057)
Plantronics Blackwire 3225 Series (047f:c058)

Quote from previous patch by Maxim Mikityanskiy
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.

The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
End quote
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The HID descriptor of this device contains two mouse collections, one
for mouse emulation and the other for the trackpoint.

Both collections get merged and, because the first one defines X and Y,
the movemenent events reported by the trackpoint collection are
ignored.

Set the MT_CLS_WIN_8_FORCE_MULTI_INPUT class for this device to be able
to receive its reports.

This fix is similar to/based on commit 40d5bb87 ("HID: multitouch:
enable multi-input as a quirk for some devices").

Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/825Reported-by: Akito <the@akito.ooo>
Tested-by: Akito <the@akito.ooo>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Battery status is reported for the HP Envy x360 eu0009nv stylus even
though it does not have battery.

Prevent it from always reporting the battery as low (1%).

Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/823Reported-by: Ioannis Iliopoulos <jxftw2424@gmail.com>
Tested-by: Ioannis Iliopoulos <jxftw2424@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull asm-generic updates from Arnd Bergmann:
 "There are only three fairly simple patches.

  The #include change to linux/swab.h addresses a userspace build issue,
  and the change to the mmio tracing logic helps provide more useful
  traces"

* tag 'asm-generic-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  uapi: Add missing _UAPI prefix to <asm-generic/types.h> include guard
  asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info
  include/uapi/linux/swab: Fix potentially missing __always_inline

Some Wacom devices have a special "bootloader" mode that is used for
firmware flashing. When operating in this mode, the device cannot be
used for input, and the HID descriptor is not able to be processed by
the driver. The driver generates an "Unknown device_type" warning and
then returns an error code from wacom_probe(). This is a problem because
userspace still needs to be able to interact with the device via hidraw
to perform the firmware flash.

This commit adds a non-generic device definition for 056a:0094 which
is used when devices are in "bootloader" mode. It marks the devices
with a special BOOTLOADER type that is recognized by wacom_probe() and
wacom_raw_event(). When we see this type we ensure a hidraw device is
created and otherwise keep our hands off so that userspace is in full
control.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add check for the return value of the dma_alloc_coherent since
it may return NULL pointer if allocation fails.

Fixes: 4b2c53d9 ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221220024921.21992-1-jiasheng@iscas.ac.cn

Convert the final two users of prandom_u32_max() that slipped in during
6.2-rc1 to use get_random_u32_below().

Then, with no more users left, we can finally remove the deprecated
function.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Do not try to refresh the RNG seed in case the firmware does not support
setting variables.

This is specifically needed to prevent a NULL-pointer dereference on the
Lenovo X13s with some firmware revisions, or more generally, whenever
the runtime services have been disabled (e.g. efi=noruntime or with
PREEMPT_RT).

Fixes: e7b813b3 ("efi: random: refresh non-volatile random seed when RNG is initialized")
Reported-by: Steev Klimaszewski <steev@kali.org>
Reported-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

The <asm/archrandom.h> header is a random.c private detail, not
something to be called by other code. As such, don't make it
automatically available by way of random.h.

Cc: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Merge tag 'linux-can-fixes-for-6.2-20221219' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2022-12-19

The first patch is by Vincent Mailhol and adds the etas_es58x
devlink documentation to the index.

Haibo Chen's patch for the flexcan driver fixes a unbalanced
pm_runtime_enable warning.

The last patch is by me, targets the kvaser_usb driver and fixes
an error occurring with gcc-13.

* tag 'linux-can-fixes-for-6.2-20221219' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len
  can: flexcan: avoid unbalanced pm_runtime_enable warning
  Documentation: devlink: add missing toc entry for etas_es58x devlink doc
====================

Link: https://lore.kernel.org/r/20221219155210.1143439-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Benjamin Coddington says:

====================
Stop corrupting socket's task_frag

The networking code uses flags in sk_allocation to determine if it can use
current->task_frag, however in-kernel users of sockets may stop setting
sk_allocation when they convert to the preferred memalloc_nofs_save/restore,
as SUNRPC has done in commit a1231fda ("SUNRPC: Set memalloc_nofs_save()
on all rpciod/xprtiod jobs").

This will cause corruption in current->task_frag when recursing into the
network layer for those subsystems during page fault or reclaim.  The
corruption is difficult to diagnose because stack traces may not contain the
offending subsystem at all.  The corruption is unlikely to show up in
testing because it requires memory pressure, and so subsystems that
convert to memalloc_nofs_save/restore are likely to continue to run into
this issue.

Previous reports and proposed fixes:
https://lore.kernel.org/netdev/96a18bd00cbc6cb554603cc0d6ef1c551965b078.1663762494.git.gnault@redhat.com/
https://lore.kernel.org/netdev/b4d8cb09c913d3e34f853736f3f5628abfd7f4b6.1656699567.git.gnault@redhat.com/
https://lore.kernel.org/linux-nfs/de6d99321d1dcaa2ad456b92b3680aa77c07a747.1665401788.git.gnault@redhat.com/

Guilluame Nault has done all of the hard work tracking this problem down and
finding the best fix for this issue.  I'm just taking a turn posting another
fix.
====================

Link: https://lore.kernel.org/r/cover.1671194454.git.bcodding@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Now that in-kernel socket users that may recurse during reclaim have benn
converted to sk_use_task_frag = false, we can have sk_page_frag() simply
check that value.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the
GFP_NOIO flag on sk_allocation which the networking system uses to decide
when it is safe to use current->task_frag.  The results of this are
unexpected corruption in task_frag when SUNRPC is involved in memory
reclaim.

The corruption can be seen in crashes, but the root cause is often
difficult to ascertain as a crashing machine's stack trace will have no
evidence of being near NFS or SUNRPC code.  I believe this problem to
be much more pervasive than reports to the community may indicate.

Fix this by having kernel users of sockets that may corrupt task_frag due
to reclaim set sk_use_task_frag = false.  Preemptively correcting this
situation for users that still set sk_allocation allows them to convert to
memalloc_nofs_save/restore without the same unexpected corruptions that are
sure to follow, unlikely to show up in testing, and difficult to bisect.

CC: Philipp Reisner <philipp.reisner@linbit.com>
CC: Lars Ellenberg <lars.ellenberg@linbit.com>
CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Josef Bacik <josef@toxicpanda.com>
CC: Keith Busch <kbusch@kernel.org>
CC: Christoph Hellwig <hch@lst.de>
CC: Sagi Grimberg <sagi@grimberg.me>
CC: Lee Duncan <lduncan@suse.com>
CC: Chris Leech <cleech@redhat.com>
CC: Mike Christie <michael.christie@oracle.com>
CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: Valentina Manea <valentina.manea.m@gmail.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: David Howells <dhowells@redhat.com>
CC: Marc Dionne <marc.dionne@auristor.com>
CC: Steve French <sfrench@samba.org>
CC: Christine Caulfield <ccaulfie@redhat.com>
CC: David Teigland <teigland@redhat.com>
CC: Mark Fasheh <mark@fasheh.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: Dominique Martinet <asmadeus@codewreck.org>
CC: Ilya Dryomov <idryomov@gmail.com>
CC: Xiubo Li <xiubli@redhat.com>
CC: Chuck Lever <chuck.lever@oracle.com>
CC: Jeff Layton <jlayton@kernel.org>
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Sockets that can be used while recursing into memory reclaim, like
those used by network block devices and file systems, mustn't use
current->task_frag: if the current process is already using it, then
the inner memory reclaim call would corrupt the task_frag structure.

To avoid this, sk_page_frag() uses ->sk_allocation to detect sockets
that mustn't use current->task_frag, assuming that those used during
memory reclaim had their allocation constraints reflected in
->sk_allocation.

This unfortunately doesn't cover all cases: in an attempt to remove all
usage of GFP_NOFS and GFP_NOIO, sunrpc stopped setting these flags in
->sk_allocation, and used memalloc_nofs critical sections instead.
This breaks the sk_page_frag() heuristic since the allocation
constraints are now stored in current->flags, which sk_page_frag()
can't read without risking triggering a cache miss and slowing down
TCP's fast path.

This patch creates a new field in struct sock, named sk_use_task_frag,
which sockets with memory reclaim constraints can set to false if they
can't safely use current->task_frag. In such cases, sk_page_frag() now
always returns the socket's page_frag (->sk_frag). The first user is
sunrpc, which needs to avoid using current->task_frag but can keep
->sk_allocation set to GFP_KERNEL otherwise.

Eventually, it might be possible to simplify sk_page_frag() by only
testing ->sk_use_task_frag and avoid relying on the ->sk_allocation
heuristic entirely (assuming other sockets will set ->sk_use_task_frag
according to their constraints in the future).

The new ->sk_use_task_frag field is placed in a hole in struct sock and
belongs to a cache line shared with ->sk_shutdown. Therefore it should
be hot and shouldn't have negative performance impacts on TCP's fast
path (sk_shutdown is tested just before the while() loop in
tcp_sendmsg_locked()).

Link: https://lore.kernel.org/netdev/b4d8cb09c913d3e34f853736f3f5628abfd7f4b6.1656699567.git.gnault@redhat.com/Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The unregister check could be incorrectly triggered if a netdev
changes its type after register. That is possible for a tun device
using TUNSETLINK ioctl, resulting in mctp unregister failing
and the netdev unregister waiting forever.

This was encountered by https://github.com/openthread/openthread/issues/8523

Neither check at register or unregister is required. They were added in
an attempt to track down mctp_ptr being set unexpectedly, which should
not happen in normal operation.

Fixes: 7b1871af ("mctp: Warn if pointer is set for a wrong dev type")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20221215054933.2403401-1-matt@codeconstruct.com.auSigned-off-by: Jakub Kicinski <kuba@kernel.org>

KSZ swithes used interrupts for detecting the phy link up and down.
During registering the interrupt handler, it used IRQF_TRIGGER_FALLING
flag. But this flag has to be retrieved from device tree instead of hard
coding in the driver, so removing the flag.

Fixes: ff319a64 ("net: dsa: microchip: move interrupt handling logic from lan937x to ksz_common")
Reported-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20221213101440.24667-1-arun.ramadoss@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "These are a couple of build fixes from randconfig testing, plus a set
  of Mediatek SoC specific fixes, all trivial"

* tag 'soc-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  soc: tegra: fix CPU_BIG_ENDIAN dependencies
  ARM: disallow pre-ARMv5 builds with ld.lld
  ARM: pxa: fix building with clang
  MAINTAINERS: add related dts to IXP4xx
  ARM: dts: spear: drop 0x from unit address
  arm64: dts: mt8183: Fix Mali GPU clock
  arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon
  soc: mediatek: pm-domains: Fix the power glitch issue

Pull Kbuild updates from Masahiro Yamada:

 - Support zstd-compressed debug info

 - Allow W=1 builds to detect objects shared among multiple modules

 - Add srcrpm-pkg target to generate a source RPM package

 - Make the -s option detection work for future GNU Make versions

 - Add -Werror to KBUILD_CPPFLAGS when CONFIG_WERROR=y

 - Allow W=1 builds to detect -Wundef warnings in any preprocessed files

 - Raise the minimum supported version of binutils to 2.25

 - Use $(intcmp ...) to compare integers if GNU Make >= 4.4 is used

 - Use $(file ...) to read a file if GNU Make >= 4.2 is used

 - Print error if GNU Make older than 3.82 is used

 - Allow modpost to detect section mismatches with Clang LTO

 - Include vmlinuz.efi into kernel tarballs for arm64 CONFIG_EFI_ZBOOT=y

* tag 'kbuild-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
  buildtar: fix tarballs with EFI_ZBOOT enabled
  modpost: Include '.text.*' in TEXT_SECTIONS
  padata: Mark padata_work_init() as __ref
  kbuild: ensure Make >= 3.82 is used
  kbuild: refactor the prerequisites of the modpost rule
  kbuild: change module.order to list *.o instead of *.ko
  kbuild: use .NOTINTERMEDIATE for future GNU Make versions
  kconfig: refactor Makefile to reduce process forks
  kbuild: add read-file macro
  kbuild: do not sort after reading modules.order
  kbuild: add test-{ge,gt,le,lt} macros
  Documentation: raise minimum supported version of binutils to 2.25
  kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds
  kbuild: move -Werror from KBUILD_CFLAGS to KBUILD_CPPFLAGS
  kbuild: Port silent mode detection to future gnu make.
  init/version.c: remove #include <generated/utsrelease.h>
  firmware_loader: remove #include <generated/utsrelease.h>
  modpost: Mark uuid_le type to be suitable only for MEI
  kbuild: add ability to make source rpm buildable using koji
  kbuild: warn objects shared among multiple modules
  ...

Pull zstd updates from Nick Terrell:
 "Update the kernel to upstream zstd v1.5.2 [0]. Specifically to the tag
  v1.5.2-kernel [1] which includes several cherrypicked fixes for the
  kernel on top of v1.5.2.

  Excepting the MAINTAINERS change, all the changes in this can be
  generated by:

    git clone https://github.com/facebook/zstd
    cd zstd/contrib/linux-kernel
    git checkout v1.5.2-kernel
    LINUX=/path/to/linux/repo make import

  Additionally, this includes several minor typo fixes, which have all
  been fixed upstream so they are maintained on the next import"

Link: https://github.com/facebook/zstd/releases/tag/v1.5.2 [0]
Link: https://github.com/facebook/zstd/tree/v1.5.2-kernel [1]
Link: https://lore.kernel.org/lkml/20221024202606.404049-1-nickrterrell@gmail.com/
Link: https://github.com/torvalds/linux/commit/637a642f5ca5e850186bb64ac75ebb0f124b458d

* tag 'zstd-linus-v6.2' of https://github.com/terrelln/linux:
  zstd: import usptream v1.5.2
  zstd: Move zstd-common module exports to zstd_common_module.c
  lib: zstd: Fix comment typo
  lib: zstd: fix repeated words in comments
  MAINTAINERS: git://github -> https://github.com for terrelln
  lib: zstd: clean up double word in comment.