In some graceful updates that get initially triggered by the
RESET event, especially with older firmware, the fw_generation
bits don't change but the fw_status is seen to go to 0 then back
to 1.  However, the driver didn't perform the restart, remained
waiting for fw_generation to change, and got left in limbo.

This is because the clearing of idev->fw_status_ready to 0
didn't happen correctly as it was buried in the transition
trigger: since the transition down was triggered not here
but in the RESET event handler, the clear to 0 didn't happen,
so the transition back to 1 wasn't detected.

Fix this particular case by bringing the setting of
idev->fw_status_ready back out to where it was before.

Fixes: 398d1e37 ("ionic: add FW_STOPPING state")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If the list of devices has N elements, netdev_wait_allrefs_any()
is called N times, and linkwatch_forget_dev() is called N*(N-1)/2 times.

Fix this by calling linkwatch_forget_dev() only once per device.

Fixes: faab39f6 ("net: allow out-of-order netdev unregistration")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220218065430.2613262-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

IPv6 has this hack changing sk->sk_prot when an IPv6 socket
is 'converted' to an IPv4 one with IPV6_ADDRFORM option.

This operation is only performed for TCP and UDP, knowing
their 'struct proto' for the two network families are populated
in the same way, and can not disappear while a reader
might use and dereference sk->sk_prot.

If we think about it all reads of sk->sk_prot while
either socket lock or RTNL is not acquired should be using READ_ONCE().

Also note that other layers like MPTCP, XFRM, CHELSIO_TLS also
write over sk->sk_prot.

BUG: KCSAN: data-race in inet6_recvmsg / ipv6_setsockopt

write to 0xffff8881386f7aa8 of 8 bytes by task 26932 on cpu 0:
 do_ipv6_setsockopt net/ipv6/ipv6_sockglue.c:492 [inline]
 ipv6_setsockopt+0x3758/0x3910 net/ipv6/ipv6_sockglue.c:1019
 udpv6_setsockopt+0x85/0x90 net/ipv6/udp.c:1649
 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3489
 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180
 __do_sys_setsockopt net/socket.c:2191 [inline]
 __se_sys_setsockopt net/socket.c:2188 [inline]
 __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff8881386f7aa8 of 8 bytes by task 26911 on cpu 1:
 inet6_recvmsg+0x7a/0x210 net/ipv6/af_inet6.c:659
 ____sys_recvmsg+0x16c/0x320
 ___sys_recvmsg net/socket.c:2674 [inline]
 do_recvmmsg+0x3f5/0xae0 net/socket.c:2768
 __sys_recvmmsg net/socket.c:2847 [inline]
 __do_sys_recvmmsg net/socket.c:2870 [inline]
 __se_sys_recvmmsg net/socket.c:2863 [inline]
 __x64_sys_recvmmsg+0xde/0x160 net/socket.c:2863
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0xffffffff85e0e980 -> 0xffffffff85e01580

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 26911 Comm: syz-executor.3 Not tainted 5.17.0-rc2-syzkaller-00316-g0457e515-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There were a fair amount of changes to workaround a firmware bug leaving
a pending interrupt after migration of the ibmvnic device :

commit 2df5c60e ("net/ibmvnic: Ignore H_FUNCTION return from H_EOI
       		    to tolerate XIVE mode")
commit 284f87d2 ("Revert "net/ibmvnic: Fix EOI when running in
       		    XIVE mode"")
commit 11d49ce9 ("net/ibmvnic: Fix EOI when running in XIVE mode.")
commit f23e0643 ("ibmvnic: Clear pending interrupt after device reset")

Here is the final one taking into account the XIVE interrupt mode.

Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Cc: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb is ignored if team port is disabled. We want the skb to be delivered
if it's an link layer packet.

Issue is already fixed for bonding in
commit b89f04c6 ("bonding: deliver link-local packets with skb->dev set to link that packets arrived on")

changelog:

v2: change LLDP -> link layer in comments/commit descrip, comment format
Signed-off-by: jeffreyji <jeffreyji@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Russell King says:

====================
net: dsa: qca8k: convert to phylink_pcs and mark as non-legacy

This series adds support into DSA for the mac_select_pcs method, and
converts qca8k to make use of this, eventually marking qca8k as non-
legacy.

Patch 1 adds DSA support for mac_select_pcs.
Patch 2 and patch 3 moves code around in qca8k to make patch 4 more
readable.
Patch 4 does a simple conversion to phylink_pcs.
Patch 5 moves the serdes configuration to phylink_pcs.
Patch 6 marks qca8k as non-legacy.

v2: fix dsa_phylink_mac_select_pcs() formatting and double-blank line
in patch 5
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The qca8k driver does not make use of the speed, duplex, pause or
advertisement in its phylink_mac_config() implementation, so it can be
marked as a non-legacy driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the PCS configuration to qca8k_pcs_config().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert the qca8k driver to use the phylink_pcs support to talk to the
SGMII PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move qca8k_phylink_mac_link_state() to separate the code movement from
code changes.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move qca8k_setup() to be later in the file to avoid needing prototypes
for called functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add DSA support for the phylink mac_select_pcs() method so DSA drivers
can return provide phylink with the appropriate PCS for the PHY
interface mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the second 'the'.
Replacements:
endiannes to endianness
areconnected to are connected
Mamagement to Management
undoccumented to undocumented
Xilink to Xilinx
strucutre to structure

Change kernel-doc comment style to c style for
/* Management ...
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Following the cited commit, sparse started complaining about:
../include/net/gro.h:58:1: warning: directive in macro's argument list
../include/net/gro.h:59:1: warning: directive in macro's argument list

Fix that by moving the defines out of the struct_group() macro.

Fixes: de5a1f3c ("net: gro: minor optimization for dev_gro_receive()")
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Acked-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.

Remove the redundant 'flush_workqueue()' calls.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20220216075155.940-1-vulab@iscas.ac.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Introduced in commit cf963573 ("net: dsa: Allow providing PHY
statistics from CPU port"), it appears these were never used.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220216193726.2926320-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

prot->memory_allocated should only be set if prot->sysctl_mem
is also set.

This is a followup of commit 25206111 ("crypto: af_alg - get
rid of alg_memory_allocated").
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220216171801.3604366-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

XTE_MAX_JUMBO_FRAME_SIZE is over 9000 bytes and the default value for
'rx_bd_num' is RX_BD_NUM_DEFAULT	(i.e. 1024)

So this loop allocates more than 9 Mo of memory.

Previous memory allocations in this function already use GFP_KERNEL, so
use __netdev_alloc_skb_ip_align() and an explicit GFP_KERNEL instead of a
implicit GFP_ATOMIC.

This gives more opportunities of successful allocation.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/694abd65418b2b3974106a82d758e3474c65ae8f.1645042560.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

NIXGE_MAX_JUMBO_FRAME_SIZE is over 9000 bytes and RX_BD_NUM 128.

So this loop allocates more than 1 Mo of memory.

Previous memory allocations in this function already use GFP_KERNEL, so
use __netdev_alloc_skb_ip_align() and an explicit GFP_KERNEL instead of a
implicit GFP_ATOMIC.

This gives more opportunities of successful allocation.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/28d2c8e05951ad02a57eb48333672947c8bb4f81.1645043881.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Mat Martineau says:

====================
mptcp: Selftest fine-tuning and cleanup

Patch 1 adjusts the mptcp selftest timeout to account for slow machines
running debug builds.

Patch 2 simplifies one test function.

Patches 3-6 do some cleanup, like deleting unused variables and avoiding
extra work when only printing usage information.

Patch 7 improves the checksum tests by utilizing existing checksum MIBs.
====================

Link: https://lore.kernel.org/r/20220218030311.367536-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added the data checksum error mib counters check for the
script mptcp_connect.sh when the data checksum is enabled.

In do_transfer(), got the mib counters twice, before and after running
the mptcp_connect commands. The latter minus the former is the actual
number of the data checksum mib counter.

The output looks like this:

ns1 MPTCP -> ns2 (dead:beef:1::2:10007) MPTCP   (duration    86ms) [ OK ]
ns1 MPTCP -> ns2 (10.0.2.1:10008      ) MPTCP   (duration    66ms) [ FAIL ]
server got 1 data checksum error[s]

Fixes: 94d66ba1 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/255Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To allow showing the 'help' menu even if these tools are not available.

While at it, also avoid launching the command then checking $?. Instead,
the check is directly done in the 'if'.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

These tmp files will only be created when a test will be launched.

This avoid 'dd' output when '-h' is used for example.

While at it, also avoid creating netns that will be removed when
starting the first test.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Shellcheck found that these variables were set but never used.

Note that rndh is no longer prefixed with '0-' but it doesn't change
anything.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

With an error if it is an unknown option.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch simplified pm_nl_change_endpoint(), using id-based address
lookups only. And dropped the fragile way of parsing 'addr' and 'id'
from the output of pm_nl_show_endpoints().
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

With the increase number of tests, one CI instance, using a debug kernel
config and not recent hardware, takes around 10 minutes to execute the
slowest MPTCP test: mptcp_join.sh.

Even if most CIs don't take that long to execute these tests --
typically max 10 minutes to run all selftests -- it will help some of
them if the timeout is increased.

The timeout could be disabled but it is always good to have an extra
safeguard, just in case.

Please note that on slow public CIs with kernel debug settings, it has
been observed it can easily take up to 45 minutes to execute all tests
in this very slow environment with other jobs running in parallel.
The slowest test, mptcp_join.sh takes ~30 minutes in this case.

In such environments, the selftests timeout set in the 'settings' file
is disabled because this environment is known as being exceptionnally
slow. It has been decided not to take such exceptional environments into
account and set the timeout to 20min.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
bpf-next 2022-02-17

We've added 29 non-merge commits during the last 8 day(s) which contain
a total of 34 files changed, 1502 insertions(+), 524 deletions(-).

The main changes are:

1) Add BTFGen support to bpftool which allows to use CO-RE in kernels without
   BTF info, from Mauricio Vásquez, Rafael David Tinoco, Lorenzo Fontana and
   Leonardo Di Donato. (Details: https://lpc.events/event/11/contributions/948/)

2) Prepare light skeleton to be used in both kernel module and user space
   and convert bpf_preload.ko to use light skeleton, from Alexei Starovoitov.

3) Rework bpftool's versioning scheme and align with libbpf's version number;
   also add linked libbpf version info to "bpftool version", from Quentin Monnet.

4) Add minimal C++ specific additions to bpftool's skeleton codegen to
   facilitate use of C skeletons in C++ applications, from Andrii Nakryiko.

5) Add BPF verifier sanity check whether relative offset on kfunc calls overflows
   desc->imm and reject the BPF program if the case, from Hou Tao.

6) Fix libbpf to use a dynamically allocated buffer for netlink messages to
   avoid receiving truncated messages on some archs, from Toke Høiland-Jørgensen.

7) Various follow-up fixes to the JIT bpf_prog_pack allocator, from Song Liu.

8) Various BPF selftest and vmtest.sh fixes, from Yucong Sun.

9) Fix bpftool pretty print handling on dumping map keys/values when no BTF
   is available, from Jiri Olsa and Yinjun Zhang.

10) Extend XDP frags selftest to check for invalid length, from Lorenzo Bianconi.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (29 commits)
  bpf: bpf_prog_pack: Set proper size before freeing ro_header
  selftests/bpf: Fix crash in core_reloc when bpftool btfgen fails
  selftests/bpf: Fix vmtest.sh to launch smp vm.
  libbpf: Fix memleak in libbpf_netlink_recv()
  bpftool: Fix C++ additions to skeleton
  bpftool: Fix pretty print dump for maps without BTF loaded
  selftests/bpf: Test "bpftool gen min_core_btf"
  bpftool: Gen min_core_btf explanation and examples
  bpftool: Implement btfgen_get_btf()
  bpftool: Implement "gen min_core_btf" logic
  bpftool: Add gen min_core_btf command
  libbpf: Expose bpf_core_{add,free}_cands() to bpftool
  libbpf: Split bpf_core_apply_relo()
  bpf: Reject kfunc calls that overflow insn->imm
  selftests/bpf: Add Skeleton templated wrapper as an example
  bpftool: Add C++-specific open/load/etc skeleton wrappers
  selftests/bpf: Fix GCC11 compiler warnings in -O2 mode
  bpftool: Fix the error when lookup in no-btf maps
  libbpf: Use dynamically allocated buffer when receiving netlink messages
  libbpf: Fix libbpf.map inheritance chain for LIBBPF_0.7.0
  ...
====================

Link: https://lore.kernel.org/r/20220217232027.29831-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

bpf_prog_pack_free() uses header->size to decide whether the header
should be freed with module_memfree() or the bpf_prog_pack logic.
However, in kvmalloc() failure path of bpf_jit_binary_pack_alloc(),
header->size is not set yet. As a result, bpf_prog_pack_free() may treat
a slice of a pack as a standalone kvmalloc'd header and call
module_memfree() on the whole pack. This in turn causes use-after-free by
other users of the pack.

Fix this by setting ro_header->size before freeing ro_header.

Fixes: 33c98058 ("bpf: Introduce bpf_jit_binary_pack_[alloc|finalize|free]")
Reported-by: syzbot+2f649ec6d2eea1495a8f@syzkaller.appspotmail.com
Reported-by: syzbot+ecb1e7e51c52f68f7481@syzkaller.appspotmail.com
Reported-by: syzbot+87f65c75f4a72db05445@syzkaller.appspotmail.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220217183001.1876034-1-song@kernel.org

Yevhen Orlov says:

====================
net: marvell: prestera: add basic routes offloading

Add support for blackhole and local routes for Marvell Prestera driver.
Subscribe on fib notifications and handle add/del.

Add features:
 - Support route adding.
   e.g.: "ip route add blackhole 7.7.1.1/24"
   e.g.: "ip route add local 9.9.9.9 dev sw1p30"
 - Support "rt_trap", "rt_offload", "rt_offload_failed" flags
 - Handle case, when route in "local" table overlaps route in "main" table
   example:
        ip ro add blackhole 7.7.7.7
        ip ro add local 7.7.7.7 dev sw1p30
        # blackhole route will be deoffloaded. rt_offload flag disappeared

Limitations:
 - Only "blackhole" and "local" routes supported. "nexthop" routes is TRAP
   for now and will be implemented soon.
 - Only "local" and "main" tables supported
====================
Co-developed-by: Taras Chornyi <tchornyi@marvell.com>
Signed-off-by: Taras Chornyi <tchornyi@marvell.com>
Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

For now we support only TRAP or DROP, so we can offload only "local" or
"blackhole" routes.
Nexthop routes is TRAP for now. Will be implemented soon.
Co-developed-by: Taras Chornyi <tchornyi@marvell.com>
Signed-off-by: Taras Chornyi <tchornyi@marvell.com>
Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add new router_hw object "fib_node". For now it support only DROP and
TRAP mode.
Co-developed-by: Taras Chornyi <tchornyi@marvell.com>
Signed-off-by: Taras Chornyi <tchornyi@marvell.com>
Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add functions to create/delete lpm entry in hw.
prestera_hw_lpm_add() take index of allocated virtual router.
Also it takes grp_id, which is index of allocated nexthop group.
ABI to create nexthop group will be added soon.
Co-developed-by: Taras Chornyi <tchornyi@marvell.com>
Signed-off-by: Taras Chornyi <tchornyi@marvell.com>
Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fast path bpf marge for some -next work.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Alexei Starovoitov says:

====================
pull-request: bpf 2022-02-17

We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 8 files changed, 119 insertions(+), 15 deletions(-).

The main changes are:

1) Add schedule points in map batch ops, from Eric.

2) Fix bpf_msg_push_data with len 0, from Felix.

3) Fix crash due to incorrect copy_map_value, from Kumar.

4) Fix crash due to out of bounds access into reg2btf_ids, from Kumar.

5) Fix a bpf_timer initialization issue with clang, from Yonghong.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Add schedule points in batch ops
  bpf: Fix crash due to out of bounds access into reg2btf_ids.
  selftests: bpf: Check bpf_msg_push_data return value
  bpf: Fix a bpf_timer initialization issue
  bpf: Emit bpf_timer in vmlinux BTF
  selftests/bpf: Add test for bpf_timer overwriting crash
  bpf: Fix crash due to incorrect copy_map_value
  bpf: Do not try bpf_msg_push_data with len 0
====================

Link: https://lore.kernel.org/r/20220217190000.37925-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless and netfilter.

  Current release - regressions:

   - dsa: lantiq_gswip: fix use after free in gswip_remove()

   - smc: avoid overwriting the copies of clcsock callback functions

  Current release - new code bugs:

   - iwlwifi:
      - fix use-after-free when no FW is present
      - mei: fix the pskb_may_pull check in ipv4
      - mei: retry mapping the shared area
      - mvm: don't feed the hardware RFKILL into iwlmei

  Previous releases - regressions:

   - ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()

   - tipc: fix wrong publisher node address in link publications

   - iwlwifi: mvm: don't send SAR GEO command for 3160 devices, avoid FW
     assertion

   - bgmac: make idm and nicpm resource optional again

   - atl1c: fix tx timeout after link flap

  Previous releases - always broken:

   - vsock: remove vsock from connected table when connect is
     interrupted by a signal

   - ping: change destination interface checks to match raw sockets

   - crypto: af_alg - get rid of alg_memory_allocated to avoid confusing
     semantics (and null-deref) after SO_RESERVE_MEM was added

   - ipv6: make exclusive flowlabel checks per-netns

   - bonding: force carrier update when releasing slave

   - sched: limit TC_ACT_REPEAT loops

   - bridge: multicast: notify switchdev driver whenever MC processing
     gets disabled because of max entries reached

   - wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found

   - iwlwifi: fix locking when "HW not ready"

   - phy: mediatek: remove PHY mode check on MT7531

   - dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN

   - dsa: lan9303:
      - fix polarity of reset during probe
      - fix accelerated VLAN handling"

* tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
  bonding: force carrier update when releasing slave
  nfp: flower: netdev offload check for ip6gretap
  ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt
  ipv4: fix data races in fib_alias_hw_flags_set
  net: dsa: lan9303: add VLAN IDs to master device
  net: dsa: lan9303: handle hwaccel VLAN tags
  vsock: remove vsock from connected table when connect is interrupted by a signal
  Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"
  ping: fix the dif and sdif check in ping_lookup
  net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
  net: sched: limit TC_ACT_REPEAT loops
  tipc: fix wrong notification node addresses
  net: dsa: lantiq_gswip: fix use after free in gswip_remove()
  ipv6: per-netns exclusive flowlabel checks
  net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled
  CDC-NCM: avoid overflow in sanity checking
  mctp: fix use after free
  net: mscc: ocelot: fix use-after-free in ocelot_vlan_del()
  bonding: fix data-races around agg_select_timer
  dpaa2-eth: Initialize mutex used in one step timestamping path
  ...

Avoid unnecessary goto cleanup, as there is nothing to clean up.
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220217180210.2981502-1-fallentree@fb.com

Fix typo in vmtest.sh to make sure it launch proper vm with 8 cpus.
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220217155212.2309672-1-fallentree@fb.com

In __bond_release_one(), bond_set_carrier() is only called when bond
device has no slave. Therefore, if we remove the up slave from a master
with two slaves and keep the down slave, the master will remain up.

Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond))
statement.

Reproducer:
$ insmod bonding.ko mode=0 miimon=100 max_bonds=2
$ ifconfig bond0 up
$ ifenslave bond0 eth0 eth1
$ ifconfig eth0 down
$ ifenslave -d bond0 eth1
$ cat /proc/net/bonding/bond0

Fixes: ff59c456 ("[PATCH] bonding: support carrier state for master")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/1645021088-38370-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>