- 01 Dec, 2016 8 commits
-
-
Tvrtko Ursulin authored
Makes all GEM object constructors consistent. v2: Fix compilation in GVT code. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v1)
-
Tvrtko Ursulin authored
Where it is more appropriate and also to be consistent with the direction of the driver. v2: Leave out object alloc/free inlining. (Joonas Lahtinen) Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Imre Deak authored
For LSPCON initialization during system resume we need AUX functionality, but we call the corresponding encoder reset hook with all interrupts disabled. Without interrupts we'll do a poll-wait for AUX transfer completions, which adds a significant delay if the transfers timeout/need to be retried for some reason. Fix this by enabling interrupts before calling the reset hooks. Note that while this will enable AUX interrupts it will keep HPD interrupts disabled, in a similar way to the init time output setup code. This issue existed since LSPCON support was added. v2: - Rebased on drm-tip. Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by:
David Weinehall <david.weinehall@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1480448429-27739-1-git-send-email-imre.deak@intel.com
-
Ander Conselvan de Oliveira authored
Broxton and Geminilake are both gen9lp platforms. To avoid adding IS_GEMINILAKE() checks everywhere alongside the IS_BROXTON() ones, add a IS_GEN9_LP() macro. v2: Rename macro parameter to dev_priv. (Joonas) Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Ander Conselvan de Oliveira authored
v2: Add new 0x3185 ID. (Joonas) Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478791400-21756-4-git-send-email-ander.conselvan.de.oliveira@intel.com
-
Ander Conselvan de Oliveira authored
Geminilake is an Intel
® Processor containing Intel® HD Graphics following Broxton. Let's start by adding the platform definition. PCI IDs and plaform specific code will follow. v2: Rebase (don't allow dev to be used with the new macro). v3: Update ddb size. (Matt) Rebase on s/preliminary_hw/alpha/ Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by:Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479133526-32389-1-git-send-email-ander.conselvan.de.oliveira@intel.com
-
Rodrigo Vivi authored
The following LP platform inherits a lot of this platform So let's simplify here to re-use this later. v2: Keep ddb_size out of the new macro. v3: Rebase (has_decoupled_mmio). (Imre) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1480584796-19466-1-git-send-email-ander.conselvan.de.oliveira@intel.com
-
Chris Wilson authored
Forgo marking up the u64 integer representing a user pointer as this just annoys sparse. The conversion from u64 to a user pointer is managed by u64_to_user_ptr(). Fixes: eec688e1 ("drm/i915: Add i915 perf infrastructure") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Robert Bragg <robert@sixbynine.org> Cc: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161130164649.26809-1-chris@chris-wilson.co.ukReviewed-by:
Matthew Auld <matthew.auld@intel.com>
-
- 30 Nov, 2016 1 commit
-
-
Daniel Vetter authored
Since commit 44adece5 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Aug 10 18:52:34 2016 +0200 drm/fb-helper: Add a dummy remove_conflicting_framebuffers the drm helpers take care of this for us. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161130110131.25668-1-daniel.vetter@ffwll.ch
-
- 29 Nov, 2016 17 commits
-
-
Ville Syrjälä authored
Looks like we're only initializing dev_priv->atomic_cdclk_freq at resume and commit times, not at init time. Let's do that as well. We're now hitting the 'WARN_ON(intel_state->cdclk == 0)' in hsw_compute_linetime_wm() on account of populating intel_state->cdclk from dev_priv->atomic_cdclk_freq. Previously we were mispopulating intel_state->cdclk with dev_priv->cdclk_freq which always had a proper value at init time and hence the WARN_ON() didn't trigger. Cc: stable@vger.kernel.org Cc: Matthew Auld <matthew.auld@intel.com> Reported-by:
Matthew Auld <matthew.auld@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98902 Fixes: e0ca7a6b ("drm/i915: Fix cdclk vs. dev_cdclk mess when not recomputing things") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1480428837-4207-1-git-send-email-ville.syrjala@linux.intel.comTested-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com>
-
Chris Wilson authored
Something I missed before sending off the partial series was that the non-scheduler guc reset path was broken (in the full series, this is pushed to the execlists reset handler). The issue is that after a reset, we have to refill the GuC workqueues, which we do by resubmitting the requests. However, if we already have submitted them, the fences within them have already been used and triggering them again is an error. Instead, just repopulate the guc workqueue. [ 115.858560] [IGT] gem_busy: starting subtest hang-render [ 135.839867] [drm] GPU HANG: ecode 9:0:0xe757fefe, in gem_busy [1716], reason: Hang on render ring, action: reset [ 135.839902] drm/i915: Resetting chip after gpu hang [ 135.839957] [drm] RC6 on [ 135.858351] ------------[ cut here ]------------ [ 135.858357] WARNING: CPU: 2 PID: 45 at drivers/gpu/drm/i915/i915_sw_fence.c:108 i915_sw_fence_complete+0x25/0x30 [ 135.858357] Modules linked in: rfcomm bnep binfmt_misc nls_iso8859_1 input_leds snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core btusb btrtl snd_hwdep snd_pcm 8250_dw snd_seq_midi hid_lenovo snd_seq_midi_event snd_rawmidi iwlwifi x86_pkg_temp_thermal coretemp snd_seq crct10dif_pclmul snd_seq_device hci_uart snd_timer crc32_pclmul ghash_clmulni_intel idma64 aesni_intel virt_dma btbcm snd btqca aes_x86_64 btintel lrw cfg80211 bluetooth gf128mul glue_helper ablk_helper cryptd soundcore intel_lpss_pci intel_pch_thermal intel_lpss_acpi intel_lpss acpi_als mfd_core kfifo_buf acpi_pad industrialio autofs4 hid_plantronics usbhid dm_mirror dm_region_hash dm_log sdhci_pci ahci sdhci libahci i2c_hid hid [ 135.858389] CPU: 2 PID: 45 Comm: kworker/2:1 Tainted: G W 4.9.0-rc4+ #238 [ 135.858389] Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 [ 135.858392] Workqueue: events_long i915_hangcheck_elapsed [ 135.858394] ffffc900001bf9b8 ffffffff812bb238 0000000000000000 0000000000000000 [ 135.858396] ffffc900001bf9f8 ffffffff8104f621 0000006c00000000 ffff8808296137f8 [ 135.858398] 0000000000000a00 ffff8808457a0000 ffff880845764e60 ffff880845760000 [ 135.858399] Call Trace: [ 135.858403] [<ffffffff812bb238>] dump_stack+0x4d/0x65 [ 135.858405] [<ffffffff8104f621>] __warn+0xc1/0xe0 [ 135.858406] [<ffffffff8104f748>] warn_slowpath_null+0x18/0x20 [ 135.858408] [<ffffffff813f8c15>] i915_sw_fence_complete+0x25/0x30 [ 135.858410] [<ffffffff813f8fad>] i915_sw_fence_commit+0xd/0x30 [ 135.858412] [<ffffffff8142e591>] __i915_gem_request_submit+0xe1/0xf0 [ 135.858413] [<ffffffff8142e5c8>] i915_gem_request_submit+0x28/0x40 [ 135.858415] [<ffffffff814433e7>] i915_guc_submit+0x47/0x210 [ 135.858417] [<ffffffff81443e98>] i915_guc_submission_enable+0x468/0x540 [ 135.858419] [<ffffffff81442495>] intel_guc_setup+0x715/0x810 [ 135.858421] [<ffffffff8142b6b4>] i915_gem_init_hw+0x114/0x2a0 [ 135.858423] [<ffffffff813eeaa8>] i915_reset+0xe8/0x120 [ 135.858424] [<ffffffff813f3937>] i915_reset_and_wakeup+0x157/0x180 [ 135.858426] [<ffffffff813f79db>] i915_handle_error+0x1ab/0x230 [ 135.858428] [<ffffffff812c760d>] ? scnprintf+0x4d/0x90 [ 135.858430] [<ffffffff81435985>] i915_hangcheck_elapsed+0x275/0x3d0 [ 135.858432] [<ffffffff810668cf>] process_one_work+0x12f/0x410 [ 135.858433] [<ffffffff81066bf3>] worker_thread+0x43/0x4d0 [ 135.858435] [<ffffffff81066bb0>] ? process_one_work+0x410/0x410 [ 135.858436] [<ffffffff81066bb0>] ? process_one_work+0x410/0x410 [ 135.858438] [<ffffffff8106bbb4>] kthread+0xd4/0xf0 [ 135.858440] [<ffffffff8106bae0>] ? kthread_park+0x60/0x60 v2: Only resubmit submitted requests v3: Don't forget the pending requests have reserved space. Fixes: d55ac5bf ("drm/i915: Defer transfer onto execution timeline to actual hw submission") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-6-chris@chris-wilson.co.uk
-
Chris Wilson authored
In order to avoid some complexity in trying to reconstruct the workqueues across reset, remember them instead. The issue comes when we have to handle a reset between request allocation and submission, the request has reserved space in the wq, but is not in any list so we fail to restore the reserved space. By keeping the execbuf client intact across the reset, we also keep the reservations. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-5-chris@chris-wilson.co.uk
-
Chris Wilson authored
Set the initial value of the doorbell cookie from the client. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-4-chris@chris-wilson.co.uk
-
Chris Wilson authored
The client->cookie is a shadow of the doorbell->cookie value, so rename it to indicate its association with the doorbell, like the doorbell id and offset. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
i915_guc_info() (part of debugfs output) tries to avoid holding struct_mutex for a long period by copying onto the stack. This causes a warning that the stack frame is massive, so stop doing that. We can even forgo holding the struct_mutex here as that doesn't serialise the values being read (and the lists used exist for the device lifetime). v2: Skip printing anything if guc->execbuf_client is disabled (avoids potential NULL dereference). Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-2-chris@chris-wilson.co.ukReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Libin Yang authored
This patch adds support for DP MST audio in i915. Enable audio codec when DP MST is enabled if has_audio flag is set. Disable audio codec when DP MST is disabled if has_audio flag is set. Another separated patches to support DP MST audio will be implemented in audio driver. This patch is ported from commit 3708d5e0 ("drm/i915: start adding dp mst audio") And because commit 3708d5e0 ("drm/i915: start adding dp mst audio") breaks MST multi-monitor setups on some platforms, the orignal patch is reverted by commit be754b10 ("Revert "drm/i915: start adding dp mst audio"") As the multi-monitor setups issue is fixed, let's port the patch and enable the dp mst audio. Signed-off-by:
Libin Yang <libin.yang@intel.com> Cc: Lyude <cpaul@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1480334827-112273-3-git-send-email-libin.yang@intel.com
-
Libin Yang authored
Prepare for using the same code for judging ddi being audio enabled. No functional changes. Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
Libin Yang <libin.yang@intel.com> Reviewed-by:
Lyude <cpaul@redhat.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1480334827-112273-2-git-send-email-libin.yang@intel.com
-
Libin Yang authored
Add the DP MST info dump in debugfs. Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
Libin Yang <libin.yang@intel.com> Reviewed-by:
Lyude <cpaul@redhat.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1480334827-112273-1-git-send-email-libin.yang@intel.com
-
Chris Wilson authored
drivers/gpu/drm/i915/./i915_trace.h: In function ‘trace_event_raw_event_i915_gem_evict’: drivers/gpu/drm/i915/./i915_trace.h:409:24: error: ‘struct i915_address_space’ has no member named ‘dev’ __entry->dev = vm->dev->primary->index; A couple of macros missed in the s/vm->dev/vm->i915/ conversion. Fixes: 49d73912 ("drm/i915: Convert vm->dev backpointer to vm->i915") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161129124205.19351-1-chris@chris-wilson.co.ukReviewed-by:
Michał Winiarski <michal.winiarski@intel.com>
-
Chris Wilson authored
Just a couple of naked 64bit divides causing link errors on 32bit builds, with: ERROR: "__udivdi3" [drivers/gpu/drm/i915/i915.ko] undefined! v2: do_div() is only u64/u32, we need a u32/u64! v3: div_u64() == u64/u32, div64_u64() == u64/u64 Reported-by:
kbuild test robot <fengguang.wu@intel.com> Fixes: d7965152 ("drm/i915: Enable i915 perf stream for Haswell OA unit") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Robert Bragg <robert@sixbynine.org> Link: http://patchwork.freedesktop.org/patch/msgid/20161123150714.24449-1-chris@chris-wilson.co.ukReviewed-by:
Robert Bragg <robert@sixbynine.org>
-
Chris Wilson authored
99% of the time we access i915_address_space->dev we want the i915 device and not the drm device, so let's store the drm_i915_private backpointer instead. The only real complication here are the inlines in i915_vma.h where drm_i915_private is not yet defined and so we have to choose an alternate path for our asserts. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161129095008.32622-1-chris@chris-wilson.co.ukReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Jérémy Lefaure authored
Two warnings are produced by gcc (tested with gcc 6.2.1): drivers/gpu/drm/i915/intel_csr.c: In function ‘csr_load_work_fn’: drivers/gpu/drm/i915/intel_csr.c:400:5: error: ‘fw’ is used uninitialized in this function [-Werror=uninitialized] if (fw) ^ and In file included from drivers/gpu/drm/i915/i915_drv.h:47:0, from drivers/gpu/drm/i915/intel_guc_loader.c:30: drivers/gpu/drm/i915/intel_guc_loader.c: In function ‘intel_guc_init’: ./include/drm/drmP.h:228:2: error: ‘fw’ may be used uninitialized in this function -Werror=maybe-uninitialized] drm_printk(KERN_DEBUG, DRM_UT_DRIVER, fmt, ##__VA_ARGS__) ^~~~~~~~~~ drivers/gpu/drm/i915/intel_guc_loader.c:595:25: note: ‘fw’ was declared here const struct firmware *fw; ^~ When CONFIG_DRM_I915_WERROR is set, those warnings break the build. Initializing fw pointer to NULL in both cases removes the warnings. Signed-off-by:
Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161128234319.20800-1-jeremy.lefaure@lse.epita.fr
-
Zhi Wang authored
a PT page will be released if it doesn't contain any meaningful mappings during PPGTT page table shrinking. The PT entry in the upper level will be set to a scratch entry. Normally this works nicely, but in virtualization world, the PPGTT page table is tracked by hypervisor. Releasing the PT page before modifying the upper level PT entry would cause extra efforts. As the tracked page has been returned to OS before losing track from hypervisor, it could be written in any pattern. Hypervisor has to recognize if a page is still being used as a PT page by validating these writing patterns. It's complicated. Better let the guest modify the PT entry in upper level PT first, then release the PT page. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Michał Winiarski <michal.winiarski@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhiyuan Lv <zhiyuan.lv@intel.com> Signed-off-by:
Zhi Wang <zhi.a.wang@intel.com> Link: https://patchwork.freedesktop.org/patch/122697/msgid/1479728666-25333-1-git-send-email-zhi.a.wang@intel.comSigned-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480402516-22275-1-git-send-email-zhi.a.wang@intel.com
-
Matthew Auld authored
We grab the struct_mutex in intel_crtc_page_flip, but if we are wedged or a reset is in progress we bail early but never seem to actually release the lock. Fixes: 7f1847eb ("drm/i915: Simplify checking of GPU reset_counter in display pageflips") Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161128103648.9235-1-matthew.auld@intel.comReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v4.7+
-
Chris Wilson authored
This reverts commit 27745e82 ("drm/i915/execlists: Use a local lock for dfs_link access") as the struct_mutex was required to prevent concurrent retiring and freeing, now restored in the previous patch. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161128143649.4289-2-chris@chris-wilson.co.ukReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Chris Wilson authored
David found another issue with priority bumping from mmioflips, where we are accessing the requests concurrently to them being retired and freed. Whilst we are skipping the dependency if has been submitted, that is not sufficient to stop the dependency from disappearing if another thread retires that request. To prevent we can either employ the struct_mutex (or a request mutex in the future) to serialise retiring before it is freed. Alternatively, we need to keep the dependencies alive using RCU whilst they are being accessed via the DFS. [ 1746.698111] general protection fault: 0000 [#1] PREEMPT SMP [ 1746.698305] Modules linked in: snd_hda_intel snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core coretemp crct10dif_pclmul crc32_pclmul snd_pcm ghash_clmulni_intel mei_me mei i915 e1000e ptp pps_core i2c_hid [ 1746.698750] CPU: 1 PID: 6716 Comm: kworker/u8:2 Not tainted 4.9.0-rc6-CI-Nightly_816+ #1 [ 1746.698871] Hardware name: GIGABYTE GB-BKi7A-7500/MFLP7AP-00, BIOS F1 07/27/2016 [ 1746.699125] Workqueue: events_unbound intel_mmio_flip_work_func [i915] [ 1746.699266] task: ffff880260a5e800 task.stack: ffffc90000f6c000 [ 1746.699361] RIP: 0010:[<ffffffffa006595d>] [<ffffffffa006595d>] execlists_schedule+0x8d/0x300 [i915] [ 1746.699632] RSP: 0018:ffffc90000f6fcd8 EFLAGS: 00010206 [ 1746.699724] RAX: dead0000000000f8 RBX: ffff8801f64b2bf0 RCX: ffff8801f64b2c10 [ 1746.699842] RDX: dead000000000100 RSI: 0000000000000000 RDI: ffff8801f64b0458 [ 1746.699972] RBP: ffffc90000f6fd68 R08: ffff88026488dc00 R09: 0000000000000002 [ 1746.700090] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000400 [ 1746.700195] R13: ffffc90000f6fcf0 R14: ffff88020955aa40 R15: ffff88020955aa68 [ 1746.700307] FS: 0000000000000000(0000) GS:ffff88026dc80000(0000) knlGS:0000000000000000 [ 1746.700435] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1746.700532] CR2: 0000000002a69e90 CR3: 0000000002c07000 CR4: 00000000003406e0 [ 1746.700635] Stack: [ 1746.700682] ffff880260a5e880 ffffc90000f6fd50 ffffffff810af69a ffffc90000f6fd28 [ 1746.700827] ffff88020955a628 ffff8801e1eaebf0 0000000000000020 0000000000000000 [ 1746.700947] 00000196af1edc96 ffff88025dfa4000 ffff8801f0b030a8 ffffc90000f6fcf0 [ 1746.701071] Call Trace: [ 1746.701117] [<ffffffff810af69a>] ? dequeue_entity+0x25a/0xb50 [ 1746.701260] [<ffffffffa00516be>] fence_set_priority+0x7e/0x80 [i915] [ 1746.701406] [<ffffffffa0051a15>] i915_gem_object_wait_priority+0x85/0x160 [i915] [ 1746.701599] [<ffffffffa008ccd7>] intel_mmio_flip_work_func+0x47/0x2b0 [i915] [ 1746.701717] [<ffffffff81094c4d>] process_one_work+0x14d/0x470 [ 1746.701809] [<ffffffff81094fb3>] worker_thread+0x43/0x4e0 [ 1746.701888] [<ffffffff81094f70>] ? process_one_work+0x470/0x470 [ 1746.701969] [<ffffffff81094f70>] ? process_one_work+0x470/0x470 [ 1746.702072] [<ffffffff8109a4d5>] kthread+0xc5/0xe0 [ 1746.702152] [<ffffffff81771c59>] ? _raw_spin_unlock_irq+0x9/0x10 [ 1746.702234] [<ffffffff8109a410>] ? kthread_park+0x60/0x60 [ 1746.702318] [<ffffffff81772272>] ret_from_fork+0x22/0x30 [ 1746.702387] Code: 89 42 08 48 8b 45 88 48 89 55 c0 4c 89 6d c8 4c 8d 70 d8 4d 8d 7e 28 4d 39 ef 74 72 49 8b 1e 48 8b 13 48 39 d3 48 8d 42 f8 74 3e <48> 8b 10 8b 52 38 41 39 d4 7e 26 48 8b 50 30 48 8b 78 28 48 8d [ 1746.702921] RIP [<ffffffffa006595d>] execlists_schedule+0x8d/0x300 [i915] Nov 25 21:42:54 kbl-gbbki7 kernel: [ 1746.703027] RSP <ffffc90000f6fcd8> Fixes: 27745e82 ("drm/i915/execlists: Use a local lock for dfs_link access") Fixes: 9a151987 ("drm/i915: Add execution priority boosting for mmioflips") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161128143649.4289-1-chris@chris-wilson.co.ukReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
- 25 Nov, 2016 13 commits
-
-
Arkadiusz Hiler authored
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by:
Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-6-git-send-email-arkadiusz.hiler@intel.comSigned-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Arkadiusz Hiler authored
send_mutex is used to serialise communication with GuC via intel_guc_send(). Since functions that utilize it are no longer limited to submission, initialization should be handled as a part of general setup. v2: move initialization to *_early() Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by:
Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-5-git-send-email-arkadiusz.hiler@intel.comSigned-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Arkadiusz Hiler authored
guc_send(), guc_recv() and related functions were introduced in the i915_guc_submission.c and their scope was limited only to that file. Those are not submission specific though. This patch moves moves them to intel_uc.c with intel_ prefix added. v2: rename intel_guc_log_* functions and clean up intel_guc_send usages Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by:
Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-4-git-send-email-arkadiusz.hiler@intel.comSigned-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Arkadiusz Hiler authored
To facilitate code reorganization we are renaming everything that contains guc2host or host2guc. host2guc_action() and host2guc_action_response() become guc_send() and guc_recv() respectively. Other host2guc_*() functions become simply guc_*(). Other entities are renamed basing on context they appear in: - HOST2GUC_ACTIONS_& become INTEL_GUC_ACTION_* - HOST2GUC_{INTERRUPT,TRIGGER} become GUC_SEND_{INTERRUPT,TRIGGER} - GUC2HOST_STATUS_* become INTEL_GUC_STATUS_* - GUC2HOST_MSG_* become INTEL_GUC_RECV_MSG_* - action_lock becomes send_mutex v2: drop unnecessary backslashes and use BIT() instead of '<<' v3: shortened enum names and INTEL_GUC_STATUS_* Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by:
Arkadiusz Hiler <arkadiusz.hiler@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-3-git-send-email-arkadiusz.hiler@intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Arkadiusz Hiler authored
GuC is not the only one micro controller we have. There are also HuC and DMC. Making the file more general will help with code organization. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by:
Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-2-git-send-email-arkadiusz.hiler@intel.com
-
Ander Conselvan de Oliveira authored
The check in __intel_uncore_early_sanitize() to disable decoupled mmio would disable it for every platform that is not broxton. While that's not a problem now since only broxton supports that, simply setting .has_decoupled_mmio in a new platform's device info wouldn't suffice. So avoid future confusion and change the workaround to only change the value of has_decoupled_mmio for broxton. v2: git add compile fix. (Ander) Cc: Praveen Paneri <praveen.paneri@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479993807-29353-1-git-send-email-ander.conselvan.de.oliveira@intel.com
-
Ander Conselvan de Oliveira authored
Pass dev_priv to intel_setup_outputs() and functions called by it, since those are all intel i915 specific functions. Also, in the majority of the functions dev_priv is used more often than dev. In the rare cases where there are a few calls back into drm core, a local dev variable was added. v2: Don't convert dev to &dev_priv->drm in intel_dsi_init. (Ville) Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479910904-11005-1-git-send-email-ander.conselvan.de.oliveira@intel.com
-
Chris Wilson authored
Add the tracking required to enable debugobjects for fences to improve error detection in BAT. The debugobject interface lets us track the lifetime and phases of the fences even while being embedded into larger structs, i.e. to check they are not used after they have been released. v2: Don't populate the stubs, debugobjects checks for a NULL pointer and treats it equivalently. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161125131718.20978-4-chris@chris-wilson.co.uk
-
Chris Wilson authored
Currently, we have an active reference for the request until it is retired. Though it cannot be retired before it has been executed by hardware, the request may be completed before we have finished processing the execute fence, i.e. we may continue to process that fence as we free the request. Fixes: 5590af3e ("drm/i915: Drive request submission through fence callbacks") Fixes: 23902e49 ("drm/i915: Split request submit/execute phase into two") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161125131718.20978-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
Before we return the request back to the kmem_cache after a failed i915_gem_request_alloc(), we should assert that it has not been added to any global state tracking. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161125131718.20978-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
While we will check that the request is completed prior to being retired, by placing an assert that the request is complete at the entrypoint of the function we can more clearly document the function's preconditions. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161125131718.20978-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Show the last submitted seqno to the engine, not the overall next seqno, as this is more pertinent information when inspecting the pageflip and whether the CS or display engine stalled. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20161124144750.2610-2-chris@chris-wilson.co.ukReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Joonas Lahtinen authored
Rename i915_gem_timeline member 'next_seqno' into 'seqno' as the variable is pre-increment. We've already had two bugs due to the confusing name, second is fixed as follow-up patch. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20161124144750.2610-1-chris@chris-wilson.co.uk
-
- 24 Nov, 2016 1 commit
-
-
Libin Yang authored
Some monitors will have noise or even no sound after applying the patch 6014ac12. In patch 6014ac12, it will reset the cts value to 0 for HDMI. However, we need to disable Enable CTS or M Prog bit. This is the initial setting after HW reset. Fixes: 6014ac12 ("drm/i915/audio: set proper N/M in modeset") Signed-off-by:
Libin Yang <libin.yang@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478853988-139842-1-git-send-email-libin.yang@intel.com
-